Creality 3D CR-6SE

Experience the epitome of 3D printing excellence with the Creality CR-6 SE 3D printer. It's not just a 3D printer; it's your ticket to a world of limitless creativity and precision.

Assembling this masterpiece is as smooth as a breeze, courtesy of its user-friendly modular design. It operates with whisper-like silence, all thanks to the integration of the Trinamic controller fortified with an ATmega-2560 chip.

Boasting an impressive build surface of 235mm x 235mm x 250mm, this printer doesn't just print; it creates. With the cutting-edge 'Free-Levelling' technology at its disposal, bid farewell to the hassles of manual bed levelling.

The Creality CR-6 SE stands tall in versatility too! You can effortlessly replace and customise parts including the nozzle, heat block and nozzle tip, tailoring the printer to your specific needs. The heated bed comes with a glass print bed, ensuring top-tier heat conduction and adhesion for your 3D prints. Plus, with the ability to heat up to 110°C, even filaments such as ABS are no match for this printer!

This 3D printer is not just about power and performance but also about elegance and ease of use. It features a clear 4.3-inch colour LCD touchscreen display and a sturdy metal frame. A double Z-axis enhances stability during printing, ensuring every print is a masterpiece.

Safety and convenience are paramount with the CR-6 SE. If there is a possible accident, such as a filament breakage, the sensors force the machine to suspend printing and can easily be resumed as soon as the problem is fixed. Moreover, this 3D printer comes equipped with a filament sensor, a flexible spool holder and a handy toolbox to ensure you have all your tools at the ready.

Why wait when you can start printing right away? Order filament alongside your printer and dive into the world of 3D printing with no delays.

• Aluminium cooling block (heatsink)
• Titanium heatbreak
• Aluminium heater block
• Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
• Silicone sock
• Fastening parts

The Creality 3D NEMA17 42-34 stepper motor Z-axis motor kit  has an axis length of 16mm.
The table below shows which size stepper motor that fits which axis on the different Creality 3D models:

• 1 Extruder plate
• 1 Allen key
• 2 tie wraps
• Set screws

• 1x PA12 Extruder Mount
• 1x PA12 hotend mount
• 4x M3 x 6 button head screw
• 2x M3 x 10 button head screw
• 2x M3 x 8 button head screw
• 1x M3 x 30 screw
• 1x M3 square nut
• 1x Capricorn cutting device
• 1x 70mm Capricorn tube

• 1x PA12 front housing
• 1x PA12 left wing
• 1x PA12 right wing
• 1x PA12 top cover
• 1x PA12 fan shroud
• 1x PA12 (breakout board/cables) cover
• 2x M3 x 8 button head screw
• 1x M3 x 16 screw
• 2x M3 x 20 MC6S screw
• 3x M3 square nut

• Aluminum Heater Block
• Silicone Sock
• Allen key

• Creality CR-6 SE
• CR-6 SE MAX
• CR-10 Smart

• Ender-5 S1
• Ender-3 Neo
• Ender-3 V2 Neo
• CR-6 SE
• Ender-7
• CR-6 Max
• Sermoon V1
• Sermoon V1 Pro
• CR-200B
• CR-5Pro H(CT-380)
• CR-10 Smart
• Ender-3 Max
• Sermoon V2

• Knife tip: for cutting support material
• Needle point: for clearing small holes
• Spoon tip: for removing wires and smoothing surfaces
• Standard tip: for general use

• Knife tip: for cutting support material
• Large blade point: for cutting support material
• Needle point: for clearing small holes
• Standard tip: for general use
• Spoon tip: for removing wires and smoothing surfaces
• Large spoon tip: for removing wires and smoothing surfaces
• Detail point: for updating detail work
• Ironing point: for levelling surfaces
• Countersink point: for countersinking holes
• Insertion point: for inserting metal parts

• The versatile Modifi3D post-processing tool
• Needles to clear a clogged 3D printer nozzle
• Superlube to keep your 3D printer in optimum condition
• 3D print post-processing set to keep everything neat and clean
• Digital caliper for fine calibration of your 3D printer
• A putty knife to easily remove printed objects from the print bed