All 3D Printers

Creality 3D Ender 3 v3 KE 3D printer + 1kg Black PLA

Description This special offer bundle contains:

Creality 3D Ender-3 V3 KE 3D Printer
1kg spool of 123-3D 1.75mm Black PLA

You can find full details of the Ender 3 V3 KE printer here.
You can view more information about our black PLA here.

Specifications

Dimensions:	364 x 364 x 490 mm	Printer has USB:	yes
Power rating:	350 W	Max print depth:	22 cm
Input voltage:	100-240V	Max print width:	22 cm
Filament diameter:	1.75 mm	Max print height:	24 cm
Nozzle diameter:	0.4 mm	Printer bed levelling:	automatic
Printer no of extruders:	1	Heatbed max temp:	100 °C
Brand:	Creality 3D	Filament sensor:	yes
Weight:	7.12 kg	Printer extruder:	Direct
Network:	WiFi	Max print volume:	11.616
Heated bed included:	yes	Our item no:	DKI00214
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

Recommended

123-3D Adhesive Spray (150 ml) £6.50

£220.00

£183.33 Excl. 20% VAT

In stock

Anycubic Kobra 3 (combo) 3D Printer with ACE Pro System

Zoom in

1
0

Description Anycubic Kobra 3 3D Printer with ACE Pro multi-filament system for multi colour printing.

Bring the most colorful 3D prints to life with the Anycubic Kobra 3 Combo. This 3D printer comes with an Anycubic Color Engine Pro, allowing you to 3D print with up to 4 colors or types of filament at the same time. The Anycubic Color Engine Pro will automatically switch between colors or spools, allowing you to also use two spools of the same color as a backup for each other.

Intelligent
The smart algorithm helps the Anycubic Color Engine Pro load the right filament within a minute. To prevent the filament from becoming tangled, it is guided through 4 different tubes to the extruder. There is also a constant check to see whether the filament has run out. If this is the case, the screen will provide a real-time reminder, so there is less chance of your print failing. In addition, the algorithm measures the pressure in the nozzle for smooth extrusion, layer by layer. With just the push of a button you can use the vibration compensation. This will make your prints much smoother. The Kobra 3 Combo can also easily resume printing after a power failure or running out of filament.

User friendly
This 3D printer is very easy to set up and is suitable for both beginners and advanced users. Use the automatic bed leveling to always have a perfectly level print bed. You can easily operate the printer with the touchscreen, which you can also rotate 30˚ to 60˚ for extra comfort. The nozzle goes up to 300˚ C, making it suitable for many different types of filaments. In addition, it can be replaced easily and without tools. The 32 bit MCU has a silence sensor to reduce noise to a maximum of 50 dB. This means you will not be bothered by noise pollution during printing.

Other functionalities
The Kobra 3 has a sturdy frame that is suitable for long-term stable printing, even at high speeds. The stylish design ensures that this printer fits well in almost any interior. With a construction volume of no less than 250 x 250 x 260 mm and a maximum printing speed of 600 mm/s, you can easily make 3D prints of different sizes. The cooling fan spins up to 7,000 rpm, so your 3D models are cooled quickly. The filament can be dried during 3D printing, so it is always in optimal condition for printing. In addition, the filament is also kept dry when you are not printing. Finally, you can easily control your 3D printer via the Anycubic app ( Android & iOS )

Specifications

Dimensions:	505 x 453 x 483 mm	Printer has USB:	yes
Power rating:	400 W	Max print depth:	25 cm
Input voltage:	100-240V	Max print width:	25 cm
Filament diameter:	1.75 mm	Max print height:	26 cm
Nozzle diameter:	0.4 mm	Printer bed levelling:	automatic
Printer no of extruders:	1	Heatbed max temp:	100 °C
Brand:	Anycubic	Filament sensor:	yes
Weight:	13.8 kg	Printer extruder:	Direct
Network:	WiFi	Max print volume:	16.25
Heated bed included:	yes	Our item no:	DKI00263
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

*Filament not included

£295.00

£245.83 Excl. 20% VAT

In stock

Creality Hi Combo

Zoom in

Description Create the most colorful 3D prints with the Hi 3D printer from Creality. This 3D printer has a maximum print speed of 500 mm/s and a maximum acceleration of 12000 mm/s², allowing you to print in no time. With this combo you not only get the printer, but also a CFS, with which you can print up to 4 colors simultaneously.

Multi material system
The Creality Hi can be used in combination with the Creality Filament System, or CFS. This allows you to use up to 4 colours or materials in the same 3D print, without having to change them manually. This is ideal for making vibrant prints or for making complicated prints with supports of solvent material. It is also possible to connect 4 CFS units together, so the possibilities go up to 16 colours.

User friendly
Because this 3D printer is delivered 95% pre-assembled with a handy boot-up quick guide, you can get started even faster. The movable 3.2 inch touchscreen makes it easy to operate the printer and with the camera you can easily make videos of your 3D prints and time lapse videos. In addition, the camera comes with a privacy slider, which protects your privacy. There are also no problems with noise pollution due to the noise level of ≤ 48 dB.

Useful features
Thanks to automatic bed leveling and x-axis tilt reduction, where two individual leadscrews adjust the x-axis position, you are assured of a perfect first layer every time. The 1000W heatbed can heat up to 60˚C in 30 seconds or to 100˚C in 90 seconds, so you can get started quickly. The Creality Hi indicates its status with sound. For example, a sound will be played when the printer unexpectedly pauses or has finished printing. The 3D printer uses a proprietary algorithm that actively neutralizes vibrations, so you can quickly create prints with a smooth surface.

Sturdy design
The Creality Hi has a full metal design that is cast from an aluminum alloy, making it very sturdy. The advanced extruder has wear-resistant metal gears that last a long time. In addition, the 'run-out' sensor monitors whether the filament is broken or empty. If there is still a spool of the same filament available in the CFS, it will automatically be switched to this.

Specifications

Dimensions:	40.9 x 39.2 x 47.7 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	26 cm
Filament diameter:	1.75 mm	Max print width:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	100 °C
Weight:	11.31 kg	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	20.28
Camera included:	yes	Our item no:	DKI00323
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

123-3D Adhesive Spray (150 ml) £6.50

£359.00

£299.17 Excl. 20% VAT

In stock

Anycubic Kobra S1 Combo 3D printer

Zoom in

Description Make 3D prints at high speed with the Kobra S1 3D printer from Anycubic. With a maximum print speed of 600 mm/s, you can create interesting projects in no time. In addition, this 3D printer has handy functions that make it even easier for you. With this combo you also immediately receive the Ace Pro multi-material system.

Ace Pro
The Ace Pro allows you to use up to 4 colors or materials in one print. This allows you to easily create colorful 3D prints or prints with multiple materials. By connecting multiple Ace Pro units, you can even increase this number to 8 colors or materials. This unit also actively dries the filament during 3D printing, giving you the hightest quality 3D prints.

Good performance
This 3D printer is made of high quality materials and is easy to use. Because this 3D printer comes with a 320 ˚ C full metal hotend, a 120 ˚ C heatbed and a closed housing, materials such as ABS and ASA can also be printed easily. The combination of the CoreXY construction, the 50 W hotend, heater, Kobra OS and the powerful cooling fan support 3D printing at high speed.

Useful features
For improved quality of your 3D prints, you can use vibration compensation and flow calibration. This will print the layer lines tighter and give you perfect 3D prints. The Kobra S1 is equipped with LeviQ 3.0 automatic levelling and a quick release hotend for extra convenience. The Kobra S1 also uses AI to detect filament breakage, tangling and clogging. In addition, it is possible to resume your 3D print after a power failure. This way you do not have to restart your 3D print. For extra ease of use, this 3D printer works with a decibel level of ≤ 48 dB and there are carbon filters to reduce unpleasant odours.

Other functionalities
The 4.3 inch touchscreen has an intuitive user interface, making it easy to use. The silent print mode has a maximum noise level of 44 decibels. This also makes this 3D printer suitable for use in areas where you do not want noise pollution. You can use the Anycubic Kobra S1 with the Anycubic app, which allows you to remotely monitor your 3D printing process, create time lapse videos and control the 3D printer remotely.

Specifications

Dimensions:	400 x 410 x 490 mm	Hazard class:	n/a
Power rating:	1,500 W	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	25 cm
Filament diameter:	1.75 mm	Max print width:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Anycubic	Heatbed max temp:	120 °C
Weight:	15.5 kg	Filament sensor:	yes
Max print speed:	600 mm/s	Printer extruder:	Direct
Network:	WiFi	Max print volume:	15.625
Heated bed included:	yes	Our item no:	DKI00319
Camera included:	yes	Printer extruder max temp:	320 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

123-3D Adhesive Spray (150 ml) £6.50

£399.00

£332.50 Excl. 20% VAT

In stock

Anycubic Kobra 3 Max Combo 3D printer

Zoom in

Description Unleash your creativity with the Anycubic Kobra 3 Max. This large 3D printer has a build volume of no less than 420 x 420 x 500 mm, making it easy to print even large 3D prints in one go. This allows you to easily create multiple models in the same batch, saving both time and filament and making it ideal for mass production. With a maximum speed of 600 mm/s and an acceleration of 10000 mm/s², you never have to wait long for your 3D prints to be ready. This combo also comes with an Ace Pro multi-material system.

Ace Pro
Thanks to the Ace Pro, you can 3D print with 4 colors or materials at the same time. By connecting an extra unit, this number can even be increased to 8. Changing spools will be fully automatic, allowing you to spend time on other things. The intelligent drying function of the Ace Pro makes it possible to dry filament, both before and during printing. This will make your 3D prints of even higher quality. In addition, the Ace Pro can automatically switch to a new spool of the same color when the old one is empty and the printing is paused when blockages or filament tangles are detected.

User friendly
The LeviQ 3.0 automatic leveling system always ensures the perfect first layer. The belt tension is controlled semi-automatically, which prevents step loss and provides better stability when printing large multicolor 3D prints. Use the resonance compensation and active extrusion flow control to achieve even better results. In addition, the 'resume printing' function ensures that you can resume your 3D print after a power failure, so that it does not fail.

In just 125 seconds, the 800 W AC heated bed can be heated evenly to 60 ˚ C. The hotend can heat up to a temperature of 300 ˚ C, which means that you can print not only with filaments such as PLA and PETG, but also with materials such as TPU. You can easily change the nozzle thanks to the lever, so you can quickly continue with your next 3D printing project.

Other functionalities
This 3D printer has a spring steel build plate with PEI coating and a 4.3 inch touchscreen. You can use the Anycubic Slicer Next or another slicer. The Anycubic Next Slicer has various presets that make slicing even easier. In addition, it is compatible with file formats such as 3mf, stl, step, svg, obj, amf, ply and more. You can also use the Anycubic app, with which you can remotely monitor your print process.

Specifications

Dimensions:	706 x 640 x 753 mm	Hazard class:	n/a
Power rating:	300 W	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	42 cm
Filament diameter:	1.75 mm	Max print width:	42 cm
Nozzle diameter:	0.4 mm	Max print height:	50 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Anycubic	Heatbed max temp:	90 °C
Weight:	23.6 kg	Filament sensor:	yes
Max print speed:	600 mm/s	Printer extruder:	Direct
Network:	WiFi	Max print volume:	88.2
Heated bed included:	yes	Our item no:	DKI00316
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

£509.00

£424.17 Excl. 20% VAT

In stock

Creality 3D K1 Max 3D printer + 1kg Black PLA & 1kg White PLA

Zoom in

Description This special offer bundle contains:

Creality 3D K1 Max 3D Printer
1kg spool of 123-3D Black PLA
1kg spool of 123-3D White PLA

Special Bundle Price
You can find full details of the Creality 3D K1 Max 3D Printer here.
You can view more information about our black PLA here .
You can view more information about our white PLA here .

*This printer contains a Unicorn Nozzle

Specifications

Dimensions:	43.5 x 46.2 x 52.6 cm	Printer has USB:	yes
Power rating:	1,000 W	Max print depth:	30 cm
Input voltage:	100-240V	Max print width:	30 cm
Filament diameter:	1.75 mm	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Printer bed levelling:	automatic
Printer no of extruders:	1	Heatbed max temp:	120 °C
Brand:	Creality 3D	Filament sensor:	yes
Weight:	18 kg	Printer extruder:	Direct
Network:	work ethernet WiFi	Max print volume:	27
Heated bed included:	yes	Our item no:	DKI00208
Camera included:	yes	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

Recommended

123-3D Adhesive Spray (150 ml) £6.50

£569.00

£474.17 Excl. 20% VAT

In stock

Creality 3D Ender 3 V3 KE 3D printer

Zoom in

Description

Creality 3D Ender 3 V3 KE

Key Features:

Easy assembly
Build volume = 220 x 220 x 240mm
Maximum print speed = 500mm/s
Automatic bed levelling with smart self-test functionality
Intuitive UI
Print with PLA, PETG, ABS and TPU
Sprite Direct Drive extruder

Introducing the Creality 3D Ender 3 V3 KE, the compact printer from Creality that's easy to assemble, even for 3D printing beginners. Despite being impressively lightweight, it still has the same functionalities you’d expect from heavier printers but in a more convenient form factor, especially for those who have limited space to print.

On the smaller side, the Ender 3 V3 KE's 220mm x 220mm build plate means it may not be the best printer for large-scale projects. It’s also not an enclosed printer and the bed motion will limit print speed as this can affect print quality. The ideal model to combat these points is the Creality K1 Max.

Fast Print Speeds

Its Sprite Direct Drive extruder makes producing larger prints at faster speeds easy. With an impressively quick maximum print speed of 500mm/s*, you can print a Benchy in just 15 minutes and 8 seconds.

Intuitive UI

The Ender 3 V3 KE includes a touchscreen with an intuitive UI. Control the z-offset setting, automatically level the print bed and more at the touch of a button with smart self-test functionality. With the touchscreen you can view a real-time preview of the model, along with vivid motion graphics that tell you the printing parameters.

Smart Creality OS

Smart Creality operating system algorithms ensure that the quality of your prints are superior. Reduce printer vibrations using the 'Input shaping' option. The 'motion advance' option optimises filament supply, for greater efficiency. This ensures less ghosting and bumps, for a smoother print.

Wide Filament Choice

Capable of printing with filaments at higher temperatures, the Creality 3D Ender 3 V3 KE has a hotend with a 60W ceramic heater, that can completely melt filaments, for high-speed printing. Also including a copper nozzle, facilitating printing at 300°C, you can print with an expansive range of filaments, including PLA, PETG, ABS and TPU. An extensive range of compatible filaments are available to buy from us.

Monitor Prints Easily

Need to check on the progress of your 3D print? The Ender 3 V3 KE makes it easier than ever:

Control and monitor the progress of your print remotely with LAN and Cloud printing. Allowing greater control over the printing process, oversee your prints via a Wi-Fi network and PC (Creality Print).
Take charge of your 3D printing from your smartphone (Creality Cloud app for Apple and Android).
Run more than one printer simultaneously online.

Additional Features

X-axis with linear rails for smooth movement and enhanced precision.
Cooling fans on two sides for super-fast cooling, causing the freshly printed parts to cool down quickly and ensuring a tight print.

Print premium quality prints at impressively quick speeds with the Creality 3D Ender 3 V3 KE!

*For higher print quality and to prolong the life of your printer consumables, we recommend printing at a slower speed where possible.

Specifications

Dimensions:	364 x 364 x 490 mm	Hazard class:	n/a
Power rating:	350 W	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	22 cm
Filament diameter:	1.75 mm	Max print width:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	24 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	100 °C
Weight:	7.12 kg	Filament sensor:	yes
Nozzle type:	-	Printer extruder:	Direct
Network:	WiFi	Max print volume:	11.616
Heated bed included:	yes	Our item no:	DKI00200
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c

Recommended

123-3D Adhesive Spray (150 ml) £6.50

£199.00

£165.83 Excl. 20% VAT

In stock

Creality 3D K2 Plus 3D printer

Zoom in

1
0

Description Create fantastic 3D prints with the K2 Plus 3D printer from Creality. This printer has a build volume of no less than 350 x 350 x 350, allowing you to easily create large 3D prints. The maximum print speed is up to 600 mm/s with an acceleration of 30000 mm/s². Thanks to the active print chamber heating, the chamber is heated to 60 ˚ C. This allows you to work with many types of materials and the possibilities are endless.

Smart features
This 3D printer comes with automatic anti-tilt bed leveling and a 4.3 inch color touchscreen. The flexible build plate makes it easy to remove 3D prints after printing. In addition, the K2 Plus has a direct drive extruder, which allows for stable printing. Smart functions make printing even easier. For example, the filament run-out sensor lets you know when the filament is empty and the filament tangle sensor gives a notification when the filament is tangled.

Other functionalities
The K2 Plus comes with an AI camera, which allows you to monitor the 3D printing process. This printer also has an air purification, so you don't have to worry about toxins and unpleasant odors. You can send files via Ethernet, WiFi or with a USB stick.

Specifications

Dimensions:	49.5 x 51.5 x 72.5 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	35 cm
Filament diameter:	1.75 mm	Max print width:	35 cm
Nozzle diameter:	0.4 mm	Max print height:	35 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	120 °C
Weight:	38.5 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	42.875
Camera included:	yes	Our item no:	DKI00331
Printing technique:	TFDM FFF	Printer extruder max temp:	350 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

This item is shipped per pallet due to its weight/size. Shipping within 1- 2 business days if in stock.

£925.00

£770.83 Excl. 20% VAT

In stock

Creality 3D K2 Plus Combo 3D Printer

Zoom in

2
1
0

Description Create amazing, multi-colored 3D prints with the K2 Plus Combo 3D printer from Creality. This printer has a build volume of no less than 350 x 350 x 350, allowing you to easily create large 3D prints. The maximum print speed is up to 600 mm/s with an acceleration of 30000 mm/s². Thanks to the active print chamber heating, the chamber is heated to 60 ˚ C. This allows you to work with many types of materials and the possibilities are endless.

Smart features
This 3D printer comes with automatic anti-tilt bed leveling and a 4.3 inch color touchscreen. The flexible build plate makes it easy to remove 3D prints after printing. In addition, the K2 Plus has a direct drive extruder, which allows for stable printing. Smart functions make printing even easier. For example, the filament run-out sensor lets you know when the filament is empty, the automatic filament backup can load other filament and the filament tangle sensor gives a message when the filament is tangled.

Other functionalities
The K2 Plus Combo comes with an AI camera, which allows you to monitor the 3D printing process. This printer also has an air purification, so you don't have to worry about toxins and unpleasant odors. You can send files via Ethernet, WiFi or with a USB stick. Print up to 4 colors or materials at the same time or use the system for a backup spool of a color or material that you use often.

Specifications

Dimensions:	49.5 x 51.5 x 72.5 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	35 cm
Filament diameter:	1.75 mm	Max print width:	35 cm
Nozzle diameter:	0.4 mm	Max print height:	35 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	120 °C
Weight:	38.5 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	42.875
Camera included:	yes	Our item no:	DKI00283
Printing technique:	TFDM FFF	Printer extruder max temp:	350 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

This article is shipped by pallet due to its weight/size. Shipping within 1- 2 business days if in stock.

£1,069.00

£890.83 Excl. 20% VAT

In stock

Elegoo Centauri Carbon 3D printer

Zoom in

3
2
1
0

Description

The Elegoo Centauri Carbon is a powerful, fully enclosed CoreXY 3D printer that excels in speed, precision, and material compatibility. With an impressive print speed of 500 mm/s and a build volume of 256 × 256 × 256 mm, it is ideal for both hobbyists and professionals looking to produce high-quality prints with various filaments, including carbon fibre reinforced materials.

Key Features:

Build volume: 256 × 256 × 256 mm
Print speed: up to 500mm/s
Hotend temperature: up to 320 °C

Specifications

Dimensions:	398 x 404 x 490 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	25.6 cm
Filament diameter:	1.75 mm	Max print width:	25.6 cm
Nozzle diameter:	0.4 mm	Max print height:	25.6 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Elegoo	Heatbed max temp:	110 °C
Weight:	17.5 kg	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	16.777
Camera included:	yes	Our item no:	DKI00326
Printing technique:	TFDM FFF	Printer extruder max temp:	320 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

£259.00

£215.83 Excl. 20% VAT

In stock

Creality 3D Ender-5 Max 3D printer

Zoom in

1
0

Description The Creality Ender-5 Max is a powerful CoreXY 3D printer with an impressive build volume of 400 x 400 x 400 mm. With a print speed of up to 700 mm/s and a robust, all-metal frame, this printer is ideal for both large projects and batch production. The automatic 64-point bed leveling and direct extruder ensure consistent, high-quality prints, even for complex models.

Key Features:

Huge build volume of 400 x 400 x 400 mm for large or multiple prints simultaneously
Ultra-fast print speed up to 700mm/s with acceleration up to 20,000mm/s²
Supports various filaments such as PLA, PETG, TPU, ABS, ASA and more

Specifications

Dimensions:	64.9 x 72.1 x 85 cm	Printer has USB:	yes
Power rating:	1,250 W	Max print depth:	40 cm
Input voltage:	110-220V	Max print width:	40 cm
Filament diameter:	1.75 mm	Max print height:	40 cm
Nozzle diameter:	0.4 mm	Printer bed levelling:	automatic
Printer no of extruders:	1	Heatbed max temp:	100 °C
Brand:	Creality 3D	Filament sensor:	yes
Weight:	25.9 kg	Printer extruder:	Direct
Network:	WiFi	Max print volume:	64
Heated bed included:	yes	Our item no:	DKI00350
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

£599.00

£499.17 Excl. 20% VAT

In stock

Elegoo Mars 5 4K 3D printer

Zoom in

2
1
0

Description Create amazing 3D prints with the Mars 5 resin 3D printer from Elegoo. This 3D printer has a build volume of 142.43 x 89.6 x 150 mm and a maximum print speed of 70 mm/h. The xy resolution is 35 x 35 µm (4098 x 2560) and the z-axis precision is 0.02 mm. The 6.6 inch 4K mono LCD screen uses an advanced COB light source, bringing small details and textures to life. The smart mechanical sensor helps you get even more out of your 3D print. Thanks to the residue detection, damage to the LCD screen is prevented. In addition, the Mars 5 gives a notification when there is a shortage of resin and problems with levelling. This means you can always make high-quality 3D prints.

Convenience first
The Mars 5 makes it even easier for you with automatic bed levelling. This 3D printer also comes with a simple self-check. The printer checks whether all components are working properly before it starts 3D printing. In addition, you do not have to worry about overheating, because the 3D printer gives an alarm when overheating and stops printing when the LED temperature exceeds 80 ˚ C. The efficient cooling system ensures that the Mars 5 has a longer lifespan and can continue to perform optimally.

Other functionalities
The quick release design makes it easy to assemble and replace parts. The design is also durable and can be used in combination with the Mars Mate air freshener. The Mars 5 comes with an FEP release film and a laser engraved build plate, which ensures that 3D prints adhere well.

Specifications

Dimensions:	230 x 230 x 434 mm	Hazard class:	n/a
Input voltage:	100-240V	Printer has USB:	yes
Brand:	Elegoo	Max print depth:	8.96 cm
Weight:	8.26 kg	Max print width:	14.343 cm
UV wavelength:	405 nm	Max print height:	15 cm
Light source:	UV-COB	Printer bed levelling:	automatic
Network:	no	Filament sensor:	no
Heated bed included:	no	Max print volume:	1.927
Camera included:	no	Our item no:	DKI00281
Printing technique:	SLA DLP	Printer voltage:	24 v/°c

£139.00

£115.83 Excl. 20% VAT

In stock

Uniformation GK3 Pro 3D Printer

Zoom in

3
2
1
0

Description

The GK3 Pro from UniFormation combines cutting-edge technology with unrivalled ease of use to turn your creative vision into reality. With impressive precision, an innovative heating system and ground-breaking features such as a 16K display and a 385 nm UV light source, this printer sets new standards. Whether you want to create detailed miniatures, functional prototypes or breathtaking designs - the GK3 Pro can achieve it all.

The main difference between the GK3 and GK3 Pro lies in the light source. The GK3 uses a 405 nm UV light source, while the GK3 Pro is equipped with a 385 nm UV light source. The shorter wavelength of the GK3 Pro allows for more precise control when curing resin, resulting in finer details and better print accuracy. Furthermore, the GK3 uses an nFEP film and the GK3 Pro uses a CPFA film.

16K display

With the optimised 16K display, you can admire every detail of your prints. The innovative "Dyed Polariser" ensures a 12% improvement in light transmission at 385 nm UV light and increases contrast by an impressive 21%. It can also withstand temperatures of up to 100 °C, which not only maximises the light output but also significantly increases the durability of the screen.

385 nm UV light source from COB & Fresnel collimator lens

Precision is key, and with the 385 nm UV light source you gain absolute control over your prints. Compared to conventional 405 nm wavelengths, the shorter light offers a lower penetration depth, allowing the finest edges and details to be cured razor-sharp. This reduces overexposure and scattering losses, while significantly increasing the optical quality and accuracy of your models. Perfect results - layer by layer!

Smart Resin Feeding System

The smart resin feeding system monitors the filling level and ensures a continuous supply throughout the printing process.

Intelligent heating system

The automatic heating system with a preheating function ensures constant temperatures and efficient printing. The printer reaches operating temperatures of 0-25 °C in just 35 minutes.

Integrated camera for smart monitoring

Thanks to the built-in camera, you can always keep an eye on your printing process whether it's real-time monitoring or impressive time-lapse recordings.

User-friendly design

UniFormation Smart App,
Building platform with quick-release design,
Resin drip hanger design,
90° rotating touch screen.

Specifications

Dimensions:	392 x 332 x 520 mm	Hazard class:	n/a
Input voltage:	110-220V	Printer has USB:	yes
Brand:	Uniformation	Max print depth:	21.1 cm
Weight:	17 kg	Max print width:	11.8 cm
UV wavelength:	-	Max print height:	24 cm
Light source:	UV-COB	Printer bed levelling:	manual
Network:	work ethernet WiFi	Filament sensor:	no
Heated bed included:	no	Max print volume:	5.975
Camera included:	no	Our item no:	DKI00325
Printing technique:	SLA DLP	Printer voltage:	24 v/°c

£568.00

£473.33 Excl. 20% VAT

In stock

Uniformation GK3 Ultra 16K 3D printer

Zoom in

2
1
0

Description Create stunning resin 3D prints with the GK3 Ultra 16K 3D printer from Uniformation. This printer has a maximum build volume of 300 x 160 x 300 mm, an XY resolution of 15120 x 6230 and a pixel pitch of 20 x 26 µm. The 13.5 inch 16K mono LCD screen is 302.4 x 161.98 mm. This allows you to create large 3D prints with sharp details.

User friendly
Thanks to its convenient features, this 3D printer is very user-friendly. The lid opens upwards and the parts are easy to remove for maintenance or replacement. You can easily detach the build plate and place it on the drip hanger to let the excess resin drain before you let your 3D print cure. This prevents resin drips from curing, which can cause unevenness in the surface of your 3D print.

Smart features
The GK3 Ultra is equipped with an automatic resin supply system. This means you no longer have to worry about adding resin yourself. You place the resin bottle in the tank and it will automatically be guided to the barrel, even during 3D printing. This way, there is always enough resin available to make your 3D print. In addition, this system monitors whether there is any leftover resin. The smart auto-detection heat system constantly ensures the right temperature, so that your 3D prints can be printed even better.

Other functionalities
The GK3 is designed to be very sturdy. The dual linear rails ensure that the machine wobbles less. This creates tighter 3D prints and increases the quality of your prints. The printer uses 200W and the vat can hold 1100ml of resin. You can easily control this 3D printer via the 5 inch touchscreen and slice files with the UniFormation Slicer, Chitubox or Lychee. Send files via wifi, ethernet or use a USB stick.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

Included with the GK3 Ultra:

Construction sheet
Resin barrel
Charging cable
USB stick
Screen protector
nFEP film
USB wifi
Tools (such as pliers, metal scraper, and a funnel)

Check out Uniformation Resin here:

Specifications

Dimensions:	455 x 400 x 575 mm	Hazard class:	n/a
Input voltage:	110-220V	Printer has USB:	yes
Brand:	Uniformation	Max print depth:	16 cm
Weight:	30 kg	Max print width:	30 cm
UV wavelength:	405 nm	Max print height:	30 cm
Light source:	UV-COB	Printer bed levelling:	automatic
Network:	work ethernet WiFi	Filament sensor:	no
Heated bed included:	no	Max print volume:	14.4
Camera included:	no	Our item no:	DKI00289
Printing technique:	SLA DLP	Printer voltage:	24 v/°c

Recommended

Uniformation Standard Resin White 1kg for £27.95

Uniformation ABS Like Resin Light Grey 1.2kg for £23.00

Uniformation ABS Like Resin Black 1.2kg for £23.00

£971.00

£809.17 Excl. 20% VAT

In stock

Original Prusa MK4S 3D Printer

Zoom in

3
2
1
0

Description Starting with 3D printing has never been easier! Take the printer out of the box, plug it in, let it run a quick Selftest, and start printing! No assembly required. With automatic calibration, always-perfect first layer, one-click printing and many other useful features, the MK4S is the best choice for your home, workshop, or company. All print profiles and configurations are in-house tested ensuring that the MK4S effortlessly delivers top-quality 3D prints at a press of a single button from the very start.

With an optional enclosure (available also in bundle with printer) and multi-material upgrade, you can expand your experience as you go, and print with advanced materials or create beautiful multi-colored prints!

Build area: 250×210×220 mm (WxDxH)
Layer height: 0.05 - 0.30 mm
1.75mm filaments: Not vendor-locked
0.4mm nozzle: Easy-to-swap
Removable print sheets
Open-source community-friendly

Specifications

Dimensions:	500 x 550 x 400 mm	Printer has USB:	yes
Input voltage:	230CV	Max print depth:	21 cm
Filament diameter:	1.75 mm	Max print width:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Prusa	Heatbed max temp:	120 °C
Weight:	7 kg	Filament sensor:	yes
Network:	no	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	11.55
Camera included:	no	Our item no:	DKI00287
Printing technique:	TFDM FFF	Printer extruder max temp:	290 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

£915.75

£763.13 Excl. 20% VAT

In stock

LDO Voron Trident rev D 300 KIT Black

Zoom in

1
0

Description

THE LDO Voron Trident 300 3D Printer Kit

The LDO Voron Trident 300 3D Printer Kit is a top-quality, large-volume, high-speed 3D printer from the premium Voron experts. Trident is perfect for printing heat-sensitive thermoplastics such as ABS and aesthetic thermoplastics like PLA. Sometimes called the "build your own Bambu", the kit includes most of the hardware essentials, and self-assembly is required.

Enclosed traditional coreXY printer
Ideal for large-format, high-speed printing
Includes most hardware essentials

Specifications

Dimensions:	412 x 412 x 346 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	300 cm
Filament diameter:	1.75 mm	Max print width:	300 cm
Nozzle diameter:	0.4 mm	Max print height:	300 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	ethernet	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	27,000
Camera included:	no	Our item no:	DKI00233
Printing technique:	TFDM FFF	Printer extruder max temp:	260 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts. This kit is supplied with black aluminium extrusions.

This product can be ordered 1 time(s).

£1,067.95

£889.96 Excl. 20% VAT

In stock

LDO Voron Trident rev D 300 3D printer KIT Space Grey

Zoom in

2
1
0

Description

THE LDO Voron Trident 300 3D Printer Kit

The LDO Voron Trident 300 3D Printer Kit is a top-quality, large-volume, high-speed 3D printer from the premium Voron experts. Trident is perfect for printing heat-sensitive thermoplastics such as ABS and aesthetic thermoplastics like PLA. Sometimes called the "build your own Bambu", the kit includes most of the hardware essentials, and self-assembly is required.

Enclosed traditional coreXY printer
Ideal for large-format, high-speed printing
Includes most hardware essentials

Specifications

Dimensions:	412 x 412 x 346 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	300 cm
Filament diameter:	1.75 mm	Max print width:	300 cm
Nozzle diameter:	0.4 mm	Max print height:	300 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	ethernet	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	27,000
Camera included:	no	Our item no:	DKI00299
Printing technique:	TFDM FFF	Printer extruder max temp:	260 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts. This kit is supplied with black aluminium extrusions.

£1,067.95

£889.96 Excl. 20% VAT

In stock

LDO Voron 2.4 rev D 350 KIT Black

Zoom in

1
0

Description

BUILT FOR ACCESSIBLE HIGH-SPEED 3D PRINTING

Utilizing a CoreXY, linear rails, and belt z-axis setup with Klipper firmware, Voron 2.4 is designed to deliver fantastic print quality at amazingly fast 3D printing speeds. Assembling this DIY machine is more accessible than ever with LDO's Voron 2.4 Kit which sources/manufactures a significant portion of the hardware needed to get your machine up and running. Containing the best price-to-performance ratio of components, you'll find that you too can build a speedy production-quality FDM 3D printer right from your benchtop.

Key Features of the LDO Voron 2.4 R2 (Rev D) 3D Printer Kit:

Large Print Volume 350 × 350 × 350mm.
Includes majority of the hardware essentials.
All are provided with printer parts (3D printed parts are required).
Premium parts sourced or made by trusted manufacturer LDO.
E3D hotend, Bondtech extruder parts included.
Raspberry PI is required to complete the build.
All necessary wiring is pre-cut and pre-wired.
Bonus kits, accessories, and tools included.
Klicky Mod kit, Nevermore Filter, LED lighting parts, Input Shaper tool kit, etc.
Acrylic panels included for enclosure.
Stainless Steel Linear Rails.

Specifications

Dimensions:	495 x 495 x 420 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	350 cm
Filament diameter:	1.75 mm	Max print width:	350 cm
Nozzle diameter:	0.4 mm	Max print height:	350 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	42,875
Camera included:	no	Our item no:	DKI00232
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts. This kit is supplied with black aluminium extrusions.

This product can be ordered 1 time(s).

£1,124.00

£936.67 Excl. 20% VAT

In stock

LDO Voron 2.4 rev D 350 3D printer KIT Space Grey

Zoom in

2
1
0

Description

Utilizing a CoreXY, linear rails, and belt z-axis setup with Klipper firmware, Voron 2.4 is designed to deliver fantastic print quality at amazingly fast 3D printing speeds. Assembling this DIY machine is more accessible than ever with LDO's Voron 2.4 Kit which sources/manufactures a significant portion of the hardware needed to get your machine up and running. Containing the best price-to-performance ratio of components, you'll find that you too can build a speedy production-quality FDM 3D printer right from your benchtop.

Key Features of the LDO Voron 2.4 R2 (Rev D) 3D Printer Kit:

Large Print Volume 350 × 350 × 350mm.
Includes majority of the hardware essentials.
All are provided with printer parts (3D printed parts are required).
Premium parts sourced or made by trusted manufacturer LDO.
E3D hotend, Bondtech extruder parts included.
Raspberry PI is required to complete the build.
All necessary wiring is pre-cut and pre-wired.
Bonus kits, accessories, and tools included.
Klicky Mod kit, Nevermore Filter, LED lighting parts, Input Shaper tool kit, etc.
Acrylic panels included for enclosure.
Stainless Steel Linear Rails.

Specifications

Dimensions:	495 x 495 x 420 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	350 cm
Filament diameter:	1.75 mm	Max print width:	350 cm
Nozzle diameter:	0.4 mm	Max print height:	350 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	42,875
Camera included:	no	Our item no:	DKI00298
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts.

This product can be ordered 1 time(s).

£1,124.00

£936.67 Excl. 20% VAT

In stock

Original Prusa CORE One+ 3D Printer

Zoom in

2
1
0

Description The CORE One+ is a fully enclosed CoreXY 3D printer with active temperature control designed for top print quality and speed. Easy to set up and made to last, this rugged machine is perfect for beginners and professionals alike. Designed and manufactured in the EU.

Whether you're new to 3D printing or a seasoned expert, Prusa CORE One+ ticks all the boxes for a reliable all-around machine. Featuring an enclosed chamber and CoreXY design, it combines high-speed printing and maximum print quality with a large 250×220×270mm print area. And there are plenty of clever design choices, e.g., an all-steel exoskeleton frame for maximum firmness and robustness. You’ll be ready to print your first model in minutes thanks to intuitive software and one-click printing.

The CORE One+ is a 3D printing workhorse engineered in the proven Prusa tradition. Designed with a "made to last" philosophy and made from premium materials, the CORE One offers exceptional reliability with minimal maintenance. The enclosed chamber, capable of reaching up to 55 °C, features active temperature control for high-quality printing across a wide range of materials from PLA and PETG (even with the door closed) to more demanding materials like ASA, PC, or Nylon.

Unpack the printer, perform a one-time calibration, and you’re ready to go. Equipped with advanced sensors for hassle-free printing, the CORE One is a true “start and forget” machine. Simply start your print and let the printer handle the rest, from fully automatic first-layer calibration to pausing the print and sending a notification if the filament runs out.

You can be sure that with our internally developed, quality-focused print profiles, your models will turn out exactly the way they were designed, with perfect dimensional accuracy. CORE One takes advantage of the upgraded Nextruder with 360° cooling that enables flawless printing of 75° overhangs, saving both time and material.

The chamber is as compact as possible, with a cleverly designed recess on each side to minimize its volume. This allows the chamber to quickly reach higher temperatures (up to 55°C), enabling you to print ASA, ABS, PC, PA (Nylons), and other advanced materials smoothly, without warping. The automatic ventilation system and active temperature control enable flawless printing of PLA - even with the door completely closed!

Specifications

Dimensions:	415 x 444 x 555 mm	Printer has USB:	yes
Input voltage:	230CV	Max print depth:	22 cm
Filament diameter:	1.75 mm	Max print width:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	27 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Prusa	Heatbed max temp:	120 °C
Weight:	22.5 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	14.85
Camera included:		Our item no:	DKI00313
Printing technique:	TFDM FFF	Printer extruder max temp:	290 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

This product can be ordered 1 time(s).

£1,138.50

£948.75 Excl. 20% VAT

In stock

Original Prusa XL Semi-Assembled, Single-toolhead 3D printer

Zoom in

Description The Original Prusa XL (semi-assembled version) is a large size CoreXY 3D printer. It has a build volume of 360×360×360mm. This variant includes one single toolhead and is semi-assembled (and comes with access to an online assembly manual).

An optional toolchanger to operate up to 5 independent toolheads can be added later. This enables you to print large objects quickly, with limited to zero waste.

Specifications

Dimensions:	700 x 900 x 720 mm	Printer has USB:	yes
Input voltage:	230CV	Max print depth:	36 cm
Filament diameter:	1.75 mm	Max print width:	36 cm
Nozzle diameter:	0.4 mm	Max print height:	36 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Prusa	Heatbed max temp:	120 °C
Weight:	27.9 kg	Filament sensor:	yes
Network:	no	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	46.656
Camera included:	no	Our item no:	DKI00265
Printing technique:	TFDM FFF	Printer extruder max temp:	290 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Printer no of extruders:

Variant:

Please note this item requires some assembly.
Did you know? We are an official Prusa reseller and provide UK based warranty support for printers purchased via 123 3D UK. All items are shipped to you from the UK.

£1,890.00

£1,575.00 Excl. 20% VAT

In stock

Original Prusa XL Assembled, Single-toolhead 3D printer

Zoom in

Description The Original Prusa XL is a large size CoreXY 3D printer. It has a build volume of 360×360×360mm. This variant includes one single toolhead.

An optional toolchanger to operate up to 5 independent toolheads can be added later. This enables you to print large objects quickly, with limited to zero waste.

Specifications

Dimensions:	700 x 900 x 720 mm	Printer has USB:	yes
Input voltage:	230CV	Max print depth:	36 cm
Filament diameter:	1.75 mm	Max print width:	36 cm
Nozzle diameter:	0.4 mm	Max print height:	36 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Prusa	Heatbed max temp:	120 °C
Weight:	27.9 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	46.656
Camera included:	no	Our item no:	DKI00264
Printing technique:	TFDM FFF	Printer extruder max temp:	290 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Printer no of extruders:

Variant:

Did you know? We are an official Prusa reseller and provide UK based warranty support for printers purchased via 123 3D UK. All items are shipped to you from the UK.

£2,193.00

£1,827.50 Excl. 20% VAT

In stock

Original Prusa XL Semi-assembled 2-toolhead 3D Printer

Zoom in

Description The Original Prusa XL (semi-assembled version) 2-toolhead 3D Printer is a large size CoreXY 3D printer. It has a build volume of 360×360×360mm. This variant includes 2 independent toolheads. This enables you to print large objects quickly, with limited to zero waste. The printer is semi-assembled (and comes with access to an online assembly manual).

Specifications

Dimensions:	700 x 900 x 720 mm	Printer has USB:	yes
Input voltage:	230CV	Max print depth:	36 cm
Filament diameter:	1.75 mm	Max print width:	36 cm
Nozzle diameter:	0.4 mm	Max print height:	36 cm
Printer no of extruders:	2	Printer bed levelling:	automatic
Brand:	Prusa	Heatbed max temp:	120 °C
Weight:	27.9 kg	Filament sensor:	yes
Network:	no	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	46.656
Camera included:	no	Our item no:	DKI00276
Printing technique:	TFDM FFF	Printer extruder max temp:	290 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Printer no of extruders:

Variant:

Please note this item requires some assembly.
Did you know? We are an official Prusa reseller and provide UK based warranty support for printers purchased via 123 3D UK. All items are shipped to you from the UK.

£2,249.00

£1,874.17 Excl. 20% VAT

In stock

Original Prusa XL Assembled 2-toolhead 3D Printer

Zoom in

Description The Original Prusa XL is a large size CoreXY 3D printer. It has a build volume of 360×360×360mm. This variant includes 2 independent toolheads. This enables you to print large objects quickly, with limited to zero waste.

Specifications

Dimensions:	700 x 900 x 720 mm	Printer has USB:	yes
Input voltage:	230CV	Max print depth:	36 cm
Filament diameter:	1.75 mm	Max print width:	36 cm
Nozzle diameter:	0.4 mm	Max print height:	36 cm
Printer no of extruders:	2	Printer bed levelling:	automatic
Brand:	Prusa	Heatbed max temp:	120 °C
Weight:	27.9 kg	Filament sensor:	yes
Network:	no	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	46.656
Camera included:	no	Our item no:	DKI00277
Printing technique:	TFDM FFF	Printer extruder max temp:	290 °C
Hazard class:	n/a	Printer voltage:	24 v/°c