FDM 3D Printers | Filament Printers

Elegoo Neptune 4 Pro 3D printer

Zoom in

Description

Elegoo Neptune 4 Pro

Key Features:

Quiet Klipper motherboard
ARM 64-bit 1.5G main frequency quad-core processor
Quick print speeds (up to 500mm/s)
Dual-gear direct drive extruder
High-temperature nozzle (up to 300°C)
Works with PLA, PETG, ABS, TPU and nylon filament
Extended hotend design
Precise temperature control
Auto bed levelling

Introducing the fast and efficient Elegoo Neptune 4 Pro 3D printer.

Quiet Yet Powerful Printing, Fast

Featuring a quiet Klipper motherboard, with this 3D printer from Elegoo, you can print free from distractions caused by noise. This Klipper motherboard, when combined with the ARM 64-bit 1.5G main frequency quad-core processor, ensures that the Neptune 4 Pro has sufficient processing power. This in turn allows the powerful Elegoo machine to print at amazingly quick speeds of up to 500mm/s, with recommended print speeds of 250mm/s, for optimum performance.

Smoother Printing

More than capable of producing accurate and smooth models, the Neptune 4 Pro supports advanced functions like input shaping and pressure advance. The dual-gear direct drive extruder, with a 5.2:1 reduction ratio, ensures smooth and consistent extrusion. When combined with the copper-titanium bi-metal throat pipe and unique air duct design, these features improve heat dissipation and reduce nozzle clogging, in order to guarantee the success of prints.

Flexible Filament Support

With a high-temperature nozzle reaching 300°C, the printer can handle a wide range of filaments for greater flexibility, all available today at 123-3D.co.uk. The Neptune 4 Pro supports PLA, PETG, and TPU, as well as high-temperature filaments like nylon.

Precise Temperature Control and Efficient Heating

Experience faster print speeds thanks to the extended hotend design which ensures consistent heating and faster melting and extrusion. With an impressive power output of 100W+150W, the slicing software automatically recognises the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the centre heating zone (120mm x 120mm). This useful feature means that models are printed to a consistently high standard. The two partitions can also be turned on and off manually for more precise temperature control. These features allow you to have more control over the printing process.

The Elegoo Neptune 4 Pro also features 2 x thickened double-sided 4015 ball bearing cooling fans and 4 x 4020 ball bearing blower fans behind the print head for omnidirectional rapid cooling of the newly printed layers. This then prevents the newly printed layers from becoming warped, improving the overall print quality, even at fast printing speeds.

Easy to Use

The surface of the PEI magnetic platform is marked for guidance, making 3D printing a simple and user-friendly process. With 121 (11 x 11) points auto bed levelling, you can achieve consistent and reliable prints every time without the need for manual bed levelling. This simplistic set-up process means that it takes less time to get you printing! Additionally, the auxiliary levelling by hand-twist knobs allows for further fine-tuning of the print bed's level, for improved print quality and maintained control of your prints.

Experience fast and powerful printing with the Elegoo Neptune 4 Pro!

Specifications

Dimensions:	475 x 445 x 515 mm	Printer has USB:	yes
Power rating:	250 W	Max print depth:	22.5 cm
Input voltage:	100-240V	Max print width:	22.5 cm
Filament diameter:	1.75 mm	Max print height:	26.5 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	Elegoo	Heatbed max temp:	110 °C
Weight:	11 kg	Filament sensor:	yes
Network:	ethernet	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	13.4
Camera included:	no	Our item no:	DKI00180
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Order now, we can ship this on Monday!

£169.50

£141.25 Excl. 20% VAT

In stock

Anycubic Kobra 3 (combo) 3D Printer with ACE Pro System

Zoom in

1
0

Description Anycubic Kobra 3 3D Printer with ACE Pro multi-filament system for multi colour printing.

Bring the most colorful 3D prints to life with the Anycubic Kobra 3 Combo. This 3D printer comes with an Anycubic Color Engine Pro, allowing you to 3D print with up to 4 colors or types of filament at the same time. The Anycubic Color Engine Pro will automatically switch between colors or spools, allowing you to also use two spools of the same color as a backup for each other.

Intelligent
The smart algorithm helps the Anycubic Color Engine Pro load the right filament within a minute. To prevent the filament from becoming tangled, it is guided through 4 different tubes to the extruder. There is also a constant check to see whether the filament has run out. If this is the case, the screen will provide a real-time reminder, so there is less chance of your print failing. In addition, the algorithm measures the pressure in the nozzle for smooth extrusion, layer by layer. With just the push of a button you can use the vibration compensation. This will make your prints much smoother. The Kobra 3 Combo can also easily resume printing after a power failure or running out of filament.

User friendly
This 3D printer is very easy to set up and is suitable for both beginners and advanced users. Use the automatic bed leveling to always have a perfectly level print bed. You can easily operate the printer with the touchscreen, which you can also rotate 30˚ to 60˚ for extra comfort. The nozzle goes up to 300˚ C, making it suitable for many different types of filaments. In addition, it can be replaced easily and without tools. The 32 bit MCU has a silence sensor to reduce noise to a maximum of 50 dB. This means you will not be bothered by noise pollution during printing.

Other functionalities
The Kobra 3 has a sturdy frame that is suitable for long-term stable printing, even at high speeds. The stylish design ensures that this printer fits well in almost any interior. With a construction volume of no less than 250 x 250 x 260 mm and a maximum printing speed of 600 mm/s, you can easily make 3D prints of different sizes. The cooling fan spins up to 7,000 rpm, so your 3D models are cooled quickly. The filament can be dried during 3D printing, so it is always in optimal condition for printing. In addition, the filament is also kept dry when you are not printing. Finally, you can easily control your 3D printer via the Anycubic app ( Android & iOS )

Specifications

Dimensions:	505 x 453 x 483 mm	Printer has USB:	yes
Power rating:	400 W	Max print depth:	25 cm
Input voltage:	100-240V	Max print width:	25 cm
Filament diameter:	1.75 mm	Max print height:	26 cm
Nozzle diameter:	0.4 mm	Printer bed levelling:	automatic
Printer no of extruders:	1	Heatbed max temp:	100 °C
Brand:	Anycubic	Filament sensor:	yes
Weight:	13.8 kg	Printer extruder:	Direct
Network:	WiFi	Max print volume:	16.25
Heated bed included:	yes	Our item no:	DKI00263
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

*Filament not included

Order now, we can ship this on Monday!

£295.00

£245.83 Excl. 20% VAT

In stock

Creality Hi Combo

Zoom in

Description Create the most colorful 3D prints with the Hi 3D printer from Creality. This 3D printer has a maximum print speed of 500 mm/s and a maximum acceleration of 12000 mm/s², allowing you to print in no time. With this combo you not only get the printer, but also a CFS, with which you can print up to 4 colors simultaneously.

Multi material system
The Creality Hi can be used in combination with the Creality Filament System, or CFS. This allows you to use up to 4 colours or materials in the same 3D print, without having to change them manually. This is ideal for making vibrant prints or for making complicated prints with supports of solvent material. It is also possible to connect 4 CFS units together, so the possibilities go up to 16 colours.

User friendly
Because this 3D printer is delivered 95% pre-assembled with a handy boot-up quick guide, you can get started even faster. The movable 3.2 inch touchscreen makes it easy to operate the printer and with the camera you can easily make videos of your 3D prints and time lapse videos. In addition, the camera comes with a privacy slider, which protects your privacy. There are also no problems with noise pollution due to the noise level of ≤ 48 dB.

Useful features
Thanks to automatic bed leveling and x-axis tilt reduction, where two individual leadscrews adjust the x-axis position, you are assured of a perfect first layer every time. The 1000W heatbed can heat up to 60˚C in 30 seconds or to 100˚C in 90 seconds, so you can get started quickly. The Creality Hi indicates its status with sound. For example, a sound will be played when the printer unexpectedly pauses or has finished printing. The 3D printer uses a proprietary algorithm that actively neutralizes vibrations, so you can quickly create prints with a smooth surface.

Sturdy design
The Creality Hi has a full metal design that is cast from an aluminum alloy, making it very sturdy. The advanced extruder has wear-resistant metal gears that last a long time. In addition, the 'run-out' sensor monitors whether the filament is broken or empty. If there is still a spool of the same filament available in the CFS, it will automatically be switched to this.

Specifications

Dimensions:	40.9 x 39.2 x 47.7 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	26 cm
Filament diameter:	1.75 mm	Max print width:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	100 °C
Weight:	11.31 kg	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	20.28
Camera included:	yes	Our item no:	DKI00323
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

123-3D Adhesive Spray (150 ml) £6.50

Order now, we can ship this on Monday!

£359.00

£299.17 Excl. 20% VAT

In stock

Anycubic Kobra 3 Max 3D printer

Zoom in

1
0

Description Unleash your creativity with the Anycubic Kobra 3 Max. This large 3D printer has a build volume of no less than 420 x 420 x 500 mm, making it easy to print even large 3D prints in one go. This allows you to easily create multiple models in the same batch, saving both time and filament and making it ideal for mass production. With a maximum speed of 600 mm/s and an acceleration of 10000 mm/s², you never have to wait long for your 3D prints to be ready.

User friendly
The LeviQ 3.0 automatic leveling system always ensures the perfect first layer. The belt tension is controlled semi-automatically, which prevents step loss and provides better stability when printing large multicolor 3D prints. Use the resonance compensation and active extrusion flow control to achieve even better results. In addition, the 'resume printing' function ensures that you can resume your 3D print after a power failure, so that it does not fail.

In just 125 seconds, the 800 W AC heated bed can be heated evenly to 60 ˚ C. The hotend can heat up to a temperature of 300 ˚ C, which means that you can print not only with filaments such as PLA and PETG, but also with materials such as TPU. You can easily change the nozzle thanks to the lever, so you can quickly continue with your next 3D printing project.

Other functionalities
This 3D printer has a spring steel build plate with PEI coating and a 4.3 inch touchscreen. You can use the Anycubic Slicer Next or another slicer. The Anycubic Next Slicer has various presets that make slicing even easier. In addition, it is compatible with file formats such as 3mf, stl, step, svg, obj, amf, ply and more. You can also use the Anycubic app, with which you can remotely monitor your print process.

Specifications

Dimensions:	706 x 640 x 753 mm	Hazard class:	n/a
Power rating:	300 W	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	42 cm
Filament diameter:	1.75 mm	Max print width:	42 cm
Nozzle diameter:	0.4 mm	Max print height:	50 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Anycubic	Heatbed max temp:	90 °C
Weight:	19 kg	Filament sensor:	yes
Max print speed:	600 mm/s	Printer extruder:	Direct
Network:	WiFi	Max print volume:	88.2
Heated bed included:	yes	Our item no:	DKI00315
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c

Order now, we can ship this on Monday!

£399.00

£332.50 Excl. 20% VAT

In stock

Anycubic Kobra S1 Combo 3D printer

Zoom in

Description Make 3D prints at high speed with the Kobra S1 3D printer from Anycubic. With a maximum print speed of 600 mm/s, you can create interesting projects in no time. In addition, this 3D printer has handy functions that make it even easier for you. With this combo you also immediately receive the Ace Pro multi-material system.

Ace Pro
The Ace Pro allows you to use up to 4 colors or materials in one print. This allows you to easily create colorful 3D prints or prints with multiple materials. By connecting multiple Ace Pro units, you can even increase this number to 8 colors or materials. This unit also actively dries the filament during 3D printing, giving you the hightest quality 3D prints.

Good performance
This 3D printer is made of high quality materials and is easy to use. Because this 3D printer comes with a 320 ˚ C full metal hotend, a 120 ˚ C heatbed and a closed housing, materials such as ABS and ASA can also be printed easily. The combination of the CoreXY construction, the 50 W hotend, heater, Kobra OS and the powerful cooling fan support 3D printing at high speed.

Useful features
For improved quality of your 3D prints, you can use vibration compensation and flow calibration. This will print the layer lines tighter and give you perfect 3D prints. The Kobra S1 is equipped with LeviQ 3.0 automatic levelling and a quick release hotend for extra convenience. The Kobra S1 also uses AI to detect filament breakage, tangling and clogging. In addition, it is possible to resume your 3D print after a power failure. This way you do not have to restart your 3D print. For extra ease of use, this 3D printer works with a decibel level of ≤ 48 dB and there are carbon filters to reduce unpleasant odours.

Other functionalities
The 4.3 inch touchscreen has an intuitive user interface, making it easy to use. The silent print mode has a maximum noise level of 44 decibels. This also makes this 3D printer suitable for use in areas where you do not want noise pollution. You can use the Anycubic Kobra S1 with the Anycubic app, which allows you to remotely monitor your 3D printing process, create time lapse videos and control the 3D printer remotely.

Specifications

Dimensions:	400 x 410 x 490 mm	Hazard class:	n/a
Power rating:	1,500 W	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	25 cm
Filament diameter:	1.75 mm	Max print width:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Anycubic	Heatbed max temp:	120 °C
Weight:	15.5 kg	Filament sensor:	yes
Max print speed:	600 mm/s	Printer extruder:	Direct
Network:	WiFi	Max print volume:	15.625
Heated bed included:	yes	Our item no:	DKI00319
Camera included:	yes	Printer extruder max temp:	320 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

123-3D Adhesive Spray (150 ml) £6.50

Order now, we can ship this on Monday!

£418.00

£348.33 Excl. 20% VAT

In stock

Creality 3D K2 Combo 3D Printer

Zoom in

Description The Creality K2 Combo is a fast and compact CoreXY 3D printer with high-quality features for both demanding hobbyists and professional makers. With a print speed of up to 600 mm/s, silent step-servo motors, a closed-loop design, and the Creality Filament System (CFS), this 3D printer offers excellent performance in a surprisingly compact size. With support for various filament types and automatic bed leveling, the K2 Combo is ready for modern printing challenges.

Key Features:

Building volume : 260 × 260 × 260 mm
Print speed : up to 600 mm/s
Hot end temperature : up to 300 °C
CFS System: For multi-color prints

Specifications

Dimensions:	445 x 477 x 573 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	26 cm
Filament diameter:	1.75 mm	Max print width:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	26 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	100 °C
Weight:	23.7 kg	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	16.95
Camera included:	yes	Our item no:	DKI00370
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

Please note: The delivery time for this item is currently unknown.

Order now, we can ship this on Monday!

£469.00

£390.83 Excl. 20% VAT

In stock

Anycubic Kobra 3 Max Combo 3D printer

Zoom in

Description Unleash your creativity with the Anycubic Kobra 3 Max. This large 3D printer has a build volume of no less than 420 x 420 x 500 mm, making it easy to print even large 3D prints in one go. This allows you to easily create multiple models in the same batch, saving both time and filament and making it ideal for mass production. With a maximum speed of 600 mm/s and an acceleration of 10000 mm/s², you never have to wait long for your 3D prints to be ready. This combo also comes with an Ace Pro multi-material system.

Ace Pro
Thanks to the Ace Pro, you can 3D print with 4 colors or materials at the same time. By connecting an extra unit, this number can even be increased to 8. Changing spools will be fully automatic, allowing you to spend time on other things. The intelligent drying function of the Ace Pro makes it possible to dry filament, both before and during printing. This will make your 3D prints of even higher quality. In addition, the Ace Pro can automatically switch to a new spool of the same color when the old one is empty and the printing is paused when blockages or filament tangles are detected.

User friendly
The LeviQ 3.0 automatic leveling system always ensures the perfect first layer. The belt tension is controlled semi-automatically, which prevents step loss and provides better stability when printing large multicolor 3D prints. Use the resonance compensation and active extrusion flow control to achieve even better results. In addition, the 'resume printing' function ensures that you can resume your 3D print after a power failure, so that it does not fail.

In just 125 seconds, the 800 W AC heated bed can be heated evenly to 60 ˚ C. The hotend can heat up to a temperature of 300 ˚ C, which means that you can print not only with filaments such as PLA and PETG, but also with materials such as TPU. You can easily change the nozzle thanks to the lever, so you can quickly continue with your next 3D printing project.

Other functionalities
This 3D printer has a spring steel build plate with PEI coating and a 4.3 inch touchscreen. You can use the Anycubic Slicer Next or another slicer. The Anycubic Next Slicer has various presets that make slicing even easier. In addition, it is compatible with file formats such as 3mf, stl, step, svg, obj, amf, ply and more. You can also use the Anycubic app, with which you can remotely monitor your print process.

Specifications

Dimensions:	706 x 640 x 753 mm	Hazard class:	n/a
Power rating:	300 W	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	42 cm
Filament diameter:	1.75 mm	Max print width:	42 cm
Nozzle diameter:	0.4 mm	Max print height:	50 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Anycubic	Heatbed max temp:	90 °C
Weight:	23.6 kg	Filament sensor:	yes
Max print speed:	600 mm/s	Printer extruder:	Direct
Network:	WiFi	Max print volume:	88.2
Heated bed included:	yes	Our item no:	DKI00316
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

Order now, we can ship this on Monday!

£499.00

£415.83 Excl. 20% VAT

In stock

Creality 3D K2 Pro Combo 3D Printer

Zoom in

Description The Creality K2 Pro Combo is an advanced, fully enclosed CoreXY 3D printer that excels in speed, stability, and material compatibility. With a generous build volume of 300 × 300 × 300 mm and the Creality Filament System (CFS), this printer is ideal for creators who want to produce high-precision multicolor prints. Thanks to its sturdy aluminum frame, servo-step motors, and active heated print chamber, the K2 Pro delivers professional print results, even with demanding materials.

Key Features:

Building volume : 300 × 300 × 300 mm
Print speed : CoreXY system with servo step motors
Hot end temperature : up to 300 °C
CFS System: For multi-color prints

Specifications

Dimensions:	505 x 445 x 850 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	30 cm
Filament diameter:	1.75 mm	Max print width:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	110 °C
Weight:	23.7 kg	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	27
Camera included:	yes	Our item no:	DKI00372
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

This item is shipped on a pallet due to its weight and size. Shipping within 1-2 business days if in stock.

Order now, we can ship this on Monday!

£869.00

£724.17 Excl. 20% VAT

In stock

Original Prusa CORE One 3D Printer KIT

Zoom in

2
1
0

Description The CORE One is a fully enclosed CoreXY 3D printer kit with active temperature control designed for top print quality and speed. Easy to set up and made to last, this rugged machine is perfect for beginners and professionals alike. Designed and manufactured in the EU.

Whether you're new to 3D printing or a seasoned expert, Prusa CORE One ticks all the boxes for a reliable all-around machine. Featuring an enclosed chamber and CoreXY design, it combines high-speed printing and maximum print quality with a large 250×220×270mm print area. And there are plenty of clever design choices, e.g., an all-steel exoskeleton frame for maximum firmness and robustness. You’ll be ready to print your first model in minutes thanks to intuitive software and one-click printing.

The CORE One is a 3D printing workhorse engineered in the proven Prusa tradition. Designed with a "made to last" philosophy and made from premium materials, the CORE One offers exceptional reliability with minimal maintenance. The enclosed chamber, capable of reaching up to 55 °C, features active temperature control for high-quality printing across a wide range of materials from PLA and PETG (even with the door closed) to more demanding materials like ASA, PC, or Nylon.

You can be sure that with our internally developed, quality-focused print profiles, your models will turn out exactly the way they were designed, with perfect dimensional accuracy. CORE One takes advantage of the upgraded Nextruder with 360° cooling that enables flawless printing of 75° overhangs, saving both time and material.

The chamber is as compact as possible, with a cleverly designed recess on each side to minimize its volume. This allows the chamber to quickly reach higher temperatures (up to 55°C), enabling you to print ASA, ABS, PC, PA (Nylons), and other advanced materials smoothly, without warping. The automatic ventilation system and active temperature control enable flawless printing of PLA - even with the door completely closed!

Please note this is a self assembly kit version!

Specifications

Dimensions:	415 x 444 x 555 mm	Printer has USB:	yes
Input voltage:	230CV	Max print depth:	22 cm
Filament diameter:	1.75 mm	Max print width:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	27 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Prusa	Heatbed max temp:	120 °C
Weight:	22.5 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	14.85
Camera included:		Our item no:	DKI00349
Printing technique:	TFDM FFF	Printer extruder max temp:	290 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Order now, we can ship this on Monday!

£895.20

£746.00 Excl. 20% VAT

In stock

Creality 3D K2 Plus 3D printer

Zoom in

1
0

Description Create fantastic 3D prints with the K2 Plus 3D printer from Creality. This printer has a build volume of no less than 350 x 350 x 350, allowing you to easily create large 3D prints. The maximum print speed is up to 600 mm/s with an acceleration of 30000 mm/s². Thanks to the active print chamber heating, the chamber is heated to 60 ˚ C. This allows you to work with many types of materials and the possibilities are endless.

Smart features
This 3D printer comes with automatic anti-tilt bed leveling and a 4.3 inch color touchscreen. The flexible build plate makes it easy to remove 3D prints after printing. In addition, the K2 Plus has a direct drive extruder, which allows for stable printing. Smart functions make printing even easier. For example, the filament run-out sensor lets you know when the filament is empty and the filament tangle sensor gives a notification when the filament is tangled.

Other functionalities
The K2 Plus comes with an AI camera, which allows you to monitor the 3D printing process. This printer also has an air purification, so you don't have to worry about toxins and unpleasant odors. You can send files via Ethernet, WiFi or with a USB stick.

Specifications

Dimensions:	49.5 x 51.5 x 72.5 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	35 cm
Filament diameter:	1.75 mm	Max print width:	35 cm
Nozzle diameter:	0.4 mm	Max print height:	35 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	120 °C
Weight:	38.5 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	42.875
Camera included:	yes	Our item no:	DKI00331
Printing technique:	TFDM FFF	Printer extruder max temp:	350 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

This item is shipped per pallet due to its weight/size. Shipping within 1- 2 business days if in stock.

Order now, we can ship this on Monday!

£925.00

£770.83 Excl. 20% VAT

In stock

Creality 3D K2 Plus Combo 3D Printer

Zoom in

2
1
0

Description Create amazing, multi-colored 3D prints with the K2 Plus Combo 3D printer from Creality. This printer has a build volume of no less than 350 x 350 x 350, allowing you to easily create large 3D prints. The maximum print speed is up to 600 mm/s with an acceleration of 30000 mm/s². Thanks to the active print chamber heating, the chamber is heated to 60 ˚ C. This allows you to work with many types of materials and the possibilities are endless.

Smart features
This 3D printer comes with automatic anti-tilt bed leveling and a 4.3 inch color touchscreen. The flexible build plate makes it easy to remove 3D prints after printing. In addition, the K2 Plus has a direct drive extruder, which allows for stable printing. Smart functions make printing even easier. For example, the filament run-out sensor lets you know when the filament is empty, the automatic filament backup can load other filament and the filament tangle sensor gives a message when the filament is tangled.

Other functionalities
The K2 Plus Combo comes with an AI camera, which allows you to monitor the 3D printing process. This printer also has an air purification, so you don't have to worry about toxins and unpleasant odors. You can send files via Ethernet, WiFi or with a USB stick. Print up to 4 colors or materials at the same time or use the system for a backup spool of a color or material that you use often.

Specifications

Dimensions:	49.5 x 51.5 x 72.5 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	35 cm
Filament diameter:	1.75 mm	Max print width:	35 cm
Nozzle diameter:	0.4 mm	Max print height:	35 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	120 °C
Weight:	38.5 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	42.875
Camera included:	yes	Our item no:	DKI00283
Printing technique:	TFDM FFF	Printer extruder max temp:	350 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg £70.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack £72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg £70.00

This article is shipped by pallet due to its weight/size. Shipping within 1- 2 business days if in stock.

Order now, we can ship this on Monday!

£1,069.00

£890.83 Excl. 20% VAT

In stock

Creality 3D Ender 3 v3 SE 3D printer

Zoom in

Description

Step into the future of creativity with the unparalleled Ender-3 V3 SE 3D printer from Creality, available at 123-3D.co.uk. Engineered for efficiency and precision, this state-of-the-art machine is your gateway to infinite innovation, bringing your wildest designs to life in an astonishingly short span of time.

Unpack, assemble and begin crafting your masterpiece within just 20 minutes. The Ender-3 V3 SE is designed with user-friendly assembly in mind, allowing you to jump right into exploring your creative potential.

But the innovation doesn't stop there. With its foolproof auto bed-levelling system, this printer ensures a streamlined start to every project. The CR Touch sensor meticulously levels the build plate, while the voltage sensor guarantees an automatic z-offset, making the printing process as seamless as possible. Whatever your printing needs may be - from chic home accessories to innovative gadgets - the Ender-3 V3 SE is your go-to solution, boasting an impressive maximum print speed of 250mm per second.

The Ender-3 V3 SE comes equipped with the robust 'Sprite' extruder, capable of handling a wide range of materials including PLA, PETG and flexible TPU. Its automatic filament loading and unloading feature further simplifies the printing process. The 'extrude' function ensures smooth filament flow from the nozzle, while the 'retract' function will quickly retract the filament, allowing you to remove and replace it effortlessly.

The Ender-3 V3 SE features a sturdy double z-axis for reduced printer wobble and 8mm thick y-axis shafts specifically designed to guide the build plate smoothly and to last for a long time. These features work in synergy to guarantee perfection in every print.

Ease of operation is another standout feature of the Ender-3 V3 SE. The 3.2-inch colour display, operable with a rotary knob, offers an intuitive interface that uses motion graphics to display the levelling process and more. This allows you to monitor the printer's activities and progress at a glance.

Last but not least, the Ender-3 V3 SE sports a sleek, compact design that blends seamlessly with any interior. It's not just a 3D printer; it's a statement of style, convenience and cutting-edge technology.

In a nutshell, the Ender-3 V3 SE is more than just a printer; it's a testament to Creality's commitment to affordability, convenience and expertise. Experience this revolution in 3D printing!

Specifications

Dimensions:	364 x 364 x 490 mm	Hazard class:	n/a
Power rating:	350 W	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	22 cm
Filament diameter:	1.75 mm	Max print width:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	100 °C
Weight:	7.12 kg	Filament sensor:	no
Nozzle type:	-	Printer extruder:	Direct
Network:	no	Max print volume:	12.1
Heated bed included:	yes	Our item no:	DKI00192
Camera included:	no	Printer extruder max temp:	260 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Video instructions:	Instructional video

Recommended

123-3D Adhesive Spray (150 ml) £6.50

Order now, we can ship this on Monday!

£149.00

£124.17 Excl. 20% VAT

In stock

Creality 3D Ender 3 V3 KE 3D printer

Zoom in

Description

Creality 3D Ender 3 V3 KE

Key Features:

Easy assembly
Build volume = 220 x 220 x 240mm
Maximum print speed = 500mm/s
Automatic bed levelling with smart self-test functionality
Intuitive UI
Print with PLA, PETG, ABS and TPU
Sprite Direct Drive extruder

Introducing the Creality 3D Ender 3 V3 KE, the compact printer from Creality that's easy to assemble, even for 3D printing beginners. Despite being impressively lightweight, it still has the same functionalities you’d expect from heavier printers but in a more convenient form factor, especially for those who have limited space to print.

On the smaller side, the Ender 3 V3 KE's 220mm x 220mm build plate means it may not be the best printer for large-scale projects. It’s also not an enclosed printer and the bed motion will limit print speed as this can affect print quality. The ideal model to combat these points is the Creality K1 Max.

Fast Print Speeds

Its Sprite Direct Drive extruder makes producing larger prints at faster speeds easy. With an impressively quick maximum print speed of 500mm/s*, you can print a Benchy in just 15 minutes and 8 seconds.

Intuitive UI

The Ender 3 V3 KE includes a touchscreen with an intuitive UI. Control the z-offset setting, automatically level the print bed and more at the touch of a button with smart self-test functionality. With the touchscreen you can view a real-time preview of the model, along with vivid motion graphics that tell you the printing parameters.

Smart Creality OS

Smart Creality operating system algorithms ensure that the quality of your prints are superior. Reduce printer vibrations using the 'Input shaping' option. The 'motion advance' option optimises filament supply, for greater efficiency. This ensures less ghosting and bumps, for a smoother print.

Wide Filament Choice

Capable of printing with filaments at higher temperatures, the Creality 3D Ender 3 V3 KE has a hotend with a 60W ceramic heater, that can completely melt filaments, for high-speed printing. Also including a copper nozzle, facilitating printing at 300°C, you can print with an expansive range of filaments, including PLA, PETG, ABS and TPU. An extensive range of compatible filaments are available to buy from us.

Monitor Prints Easily

Need to check on the progress of your 3D print? The Ender 3 V3 KE makes it easier than ever:

Control and monitor the progress of your print remotely with LAN and Cloud printing. Allowing greater control over the printing process, oversee your prints via a Wi-Fi network and PC (Creality Print).
Take charge of your 3D printing from your smartphone (Creality Cloud app for Apple and Android).
Run more than one printer simultaneously online.

Additional Features

X-axis with linear rails for smooth movement and enhanced precision.
Cooling fans on two sides for super-fast cooling, causing the freshly printed parts to cool down quickly and ensuring a tight print.

Print premium quality prints at impressively quick speeds with the Creality 3D Ender 3 V3 KE!

*For higher print quality and to prolong the life of your printer consumables, we recommend printing at a slower speed where possible.

Specifications

Dimensions:	364 x 364 x 490 mm	Hazard class:	n/a
Power rating:	350 W	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	22 cm
Filament diameter:	1.75 mm	Max print width:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	24 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	100 °C
Weight:	7.12 kg	Filament sensor:	yes
Nozzle type:	-	Printer extruder:	Direct
Network:	WiFi	Max print volume:	11.616
Heated bed included:	yes	Our item no:	DKI00200
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c

Recommended

123-3D Adhesive Spray (150 ml) £6.50

Order now, we can ship this on Monday!

£219.00

£182.50 Excl. 20% VAT

In stock

Elegoo Neptune 4 Plus 3D printer

Zoom in

Description

The Elegoo Neptune 4 Plus FDM printer is the impressive new printer from Elegoo which prioritises speed, build volume and high temperatures for greater flexibility in terms of supported filaments.

With a super fast maximum print speed of 500mm/s, as well as a large print volume of 320 x 320 x 385mm³, you’re able to print complex and detailed projects quickly.

Thanks to the printer’s maximum extruder temperature of 300°C, the Elegoo Neptune 4 Plus is able to work with a wide range of filaments, (PETG, PLA, TPU, nylon), for greater versatility. Whichever of these filaments you choose, you can be assured that it’s extruded evenly, as it features a dual-gear direct extruder.

Despite its high temperatures for wider filament choice, the Neptune 4 Plus can cool down quickly to prevent printing errors. This is due to the fans that are included with this Neptune printer:

2 x 4015 ball bearing model cooling fans
3010 ball bearing blower fan
2 x 6025 ball bearing blower fans

Lastly, the Elegoo Neptune 4 Plus also features 11 x 11 (121) points automatic bed levelling for faster and easier setup, meaning that you can begin printing quickly.

Experience the future of 3D printing with the Elegoo Neptune 4 Plus, available to order from 123-3D.co.uk!

Specifications

Dimensions:	533 x 517 x 638 mm	Max print depth:	32 cm
Input voltage:	100-240V	Max print width:	32 cm
Filament diameter:	1.75 mm	Max print height:	38.5 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	Elegoo	Heatbed max temp:	110 °C
Weight:	17.1 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	39.424
Camera included:	no	Our item no:	DKI00212
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c
Printer has USB:	yes

Order now, we can ship this on Monday!

£219.50

£182.92 Excl. 20% VAT

In stock

Two Trees SK1 CoreXY 3D printer Save 30%

Two Trees SK1 CoreXY 3D printer DKI00285

Zoom in

2
1
0

Description The SK1 from TwoTrees is a CoreXY printer that can reach a fantastic print speed of up to 700 mm/s. Thanks to the acceleration of 20000 mm/s² and the flow rate of 32 mm³ you can bring 3D prints to life at lightning speed. The build volume of 256 x 256 x 256 makes it possible to easily make large prints. This makes the SK1 a very versatile 3D printer.

Enjoy convenience
The dual gear direct drive extruder comes with a full metal hotend that can be heated up to 300 ˚ C within 30 seconds. This high temperature and the PEI-coated printing plate make it possible to print with many different types of filament, such as PLA, PETG, PC, ABS, TPU and Nylon. Thanks to the double gears, there is an improved grip on the filament, which ensures smooth guidance and good tension. The Klipper firmware of this 3D printer comes with input shaping and motion advance, allowing you to make 3D prints of even better quality. In addition, the SK1 has 3 independent motors that level the z-tilt bed at 36 points.

Other functionalities
This 3D printer has durable, high-quality guide rails that do not need to be adjusted. This allows you to get started right away without any worries. You can easily monitor and control the SK1 from a distance. It is also possible to send files to the 3D printer via the WiFi function. Finally, the TwoTrees SK1 comes with an 8G eMMC.

Specifications

Dimensions:	40 x 40 x 53 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	25.6 cm
Filament diameter:	1.75 mm	Max print width:	25.6 cm
Nozzle diameter:	0.4 mm	Max print height:	25.6 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	TwoTrees	Heatbed max temp:	100 °C
Weight:	17.5 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	16.777
Camera included:	no	Our item no:	DKI00285
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Black Friday Price!
Was: £370
Now: £259

Order now, we can ship this on Monday!

£259.00

£215.83 Excl. 20% VAT

In stock

Elegoo Neptune 4 Max 3D printer

Zoom in

Description

Introducing the Neptune 4 Max FDM printer from Elegoo.

Featuring a large build volume, supporting a wider range of creative projects, the Elegoo Neptune 4 Max 3D printer also features fast print speeds for greater efficiency. The maximum print speed of this printer is 500mm/s, meaning that you can finish projects quickly. A print volume of 420 x 420 x 480mm³ is also supported, for even greater possibilities when printing.

A maximum extruder temperature of 300°C facilitates the Elegoo Neptune 4 Max’s support of the following filaments: nylon, PETG, PLA, and TPU.

Print cooling is an efficient process thanks to the multiple fans and finally the Neptune 4 Max features an 11 x 11 (121) points automatic bed levelling system, for a faster setup.

Available to order from us at 123-3D.co.uk!

Specifications

Dimensions:	658 x 632 x 740 mm	Max print depth:	42 cm
Input voltage:	100-240V	Max print width:	42 cm
Filament diameter:	1.75 mm	Max print height:	48 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	Elegoo	Heatbed max temp:	80 °C
Weight:	22.2 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	84.672
Camera included:	no	Our item no:	DKI00213
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c
Printer has USB:	yes

Order now, we can ship this on Monday!

£284.50

£237.08 Excl. 20% VAT

In stock

Creality 3D K1C 3D printer

Zoom in

1
0

Description With the K1C 3D printer from Creality 3D you can print easier and faster than ever before. The printer comes fully assembled and calibrated, so you can start printing almost immediately. Experience unparalleled printing speeds thanks to the stable CoreXY structure and lightweight print head.

With an acceleration of 20,000mm/s², the Creality K1 runs up to 600mm/s in just 0.03 seconds, making it print up to 12 times faster than other FDM printers on the market. The high-quality titanium alloy hot end allows you to easily print up to 300°C. In combination with the dual-gear direct drive extruder, which has an extrusion force of 50N, you can use PLA, ABS, PETG, TPU, PA and PC, among others, on the K1C. Effortlessly switch to a hardened stainless steel nozzle to print abrasive filaments, such as PA-CF, without any problems.

This printer has all the advantages of the Creality K1 with additional functions. The K1C is equipped with an AI camera, with which you can monitor your print in real-time or make time-lapse videos. The silent fans significantly reduce noise and the air filter ensures that no harmful substances enter the air. With the improved filament detection sensor and feed, you are assured of smoothly guiding your filament and noticing any filament problems. The K1C 3D printer has a medium size with a print volume of 220mm x 220mm x 250mm. You can easily print remotely via the Creality Cloud.

Specifications

Dimensions:	35.5 x 35.5 x 48 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	22 cm
Filament diameter:	1.75 mm	Max print width:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	100 °C
Weight:	12.5 kg	Filament sensor:	yes
Nozzle type:	-	Printer extruder:	Direct
Network:	WiFi	Max print volume:	12.1
Heated bed included:	yes	Our item no:	DKI00220
Camera included:	yes	Replaces item no:	DKI00163
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Recommended

123-3D Adhesive Spray (150 ml) £6.50

Order now, we can ship this on Monday!

£339.00

£282.50 Excl. 20% VAT

In stock

Creality 3D K1 Max 3D printer

Zoom in

Description

Creality K1 Max

Key Features:

High-speed printing (up to 600mm/s)
Build volume = 300 x 300 x 300mm
Print with PLA, ABS, PETG, TPU, PA, PC and ASA filament
CoreXY structure
AI LiDAR scanner/camera
Real-time clock
Powered by Creality OS

The impressive Creality 3D K1 Max 3D printer is a game-changer in the industry, redefining what you can expect from 3D printing technology. Here’s what sets the K1 Max apart from other FDM printers:

Faster Print Speeds

With its high-speed printing capabilities, the Creality 3D K1 Max stands head and shoulders above its competitors. Its CoreXY structure and lightweight print head can achieve impressively fast speeds of up to 600mm/s*. Faster print speeds means greater productivity, which is fantastic news for those looking to print frequently.

Practical and Fun Applications

With a competitively large build volume of 300 x 300 x 300mm, the Creality 3D K1 Max is perfect for a variety of projects and applications, from prototyping to design verification. The spacious build plate allows you to both produce larger prints and print more at once, making it an ideal choice for those looking for an FDM printer for manufacturing purposes.

Wide Range of Supported Filament

The K1 Max supports the following filaments: PLA, ABS, PETG, TPU, PA, PC and ASA filament. This wide range of supported filament means the Creality K1 Max is flexible, adapting to your printing projects and giving you more freedom to choose the right filament for your project. An extensive range of affordable filament is also available today from 123-3D.co.uk!

Smart Features Make Printing Easier

The K1 Max is loaded with smart features designed to streamline your printing process. The AI LiDAR scanner automatically scans the first layer and identifies any errors. Its AI camera also keeps a close eye on your printing progress, alerting you to any issues, such as spaghetti errors or foreign objects.

An RTC (real-time clock) records the time accurately, even when the printer is turned off, making it easier to know how long your print has taken.

Powered by Creality OS, this smart system boasts a user-friendly UI and seamlessly synchronises data and commands with your PC, phone, cloud and add-on modules.

Transform your 3D printing experience with the versatile and powerful Creality 3D K1 Max!

*This printer contains a Unicorn Nozzle

*For a higher print quality and to prolong the life of your printer consumables, we recommend that you print at a slower speed where possible.

Specifications

Dimensions:	43.5 x 46.2 x 52.6 cm	Hazard class:	n/a
Power rating:	1,000 W	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	30 cm
Filament diameter:	1.75 mm	Max print width:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	120 °C
Weight:	18 kg	Filament sensor:	yes
Nozzle type:	-	Printer extruder:	Direct
Network:	work ethernet WiFi	Max print volume:	27
Heated bed included:	yes	Our item no:	DKI00164
Camera included:	yes	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c

Recommended

123-3D Adhesive Spray (150 ml) £6.50

Order now, we can ship this on Monday!

£549.00

£457.50 Excl. 20% VAT

In stock

Original Prusa MK4S 3D Printer

Zoom in

3
2
1
0

Description Starting with 3D printing has never been easier! Take the printer out of the box, plug it in, let it run a quick Selftest, and start printing! No assembly required. With automatic calibration, always-perfect first layer, one-click printing and many other useful features, the MK4S is the best choice for your home, workshop, or company. All print profiles and configurations are in-house tested ensuring that the MK4S effortlessly delivers top-quality 3D prints at a press of a single button from the very start.

With an optional enclosure (available also in bundle with printer) and multi-material upgrade, you can expand your experience as you go, and print with advanced materials or create beautiful multi-colored prints!

Build area: 250×210×220 mm (WxDxH)
Layer height: 0.05 - 0.30 mm
1.75mm filaments: Not vendor-locked
0.4mm nozzle: Easy-to-swap
Removable print sheets
Open-source community-friendly

Specifications

Dimensions:	500 x 550 x 400 mm	Printer has USB:	yes
Input voltage:	230CV	Max print depth:	21 cm
Filament diameter:	1.75 mm	Max print width:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Prusa	Heatbed max temp:	120 °C
Weight:	7 kg	Filament sensor:	yes
Network:	no	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	11.55
Camera included:	no	Our item no:	DKI00287
Printing technique:	TFDM FFF	Printer extruder max temp:	290 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Order now, we can ship this on Monday!

£915.75

£763.13 Excl. 20% VAT

In stock

LDO Voron Trident rev D 300 KIT Black

Zoom in

1
0

Description

THE LDO Voron Trident 300 3D Printer Kit

The LDO Voron Trident 300 3D Printer Kit is a top-quality, large-volume, high-speed 3D printer from the premium Voron experts. Trident is perfect for printing heat-sensitive thermoplastics such as ABS and aesthetic thermoplastics like PLA. Sometimes called the "build your own Bambu", the kit includes most of the hardware essentials, and self-assembly is required.

Enclosed traditional coreXY printer
Ideal for large-format, high-speed printing
Includes most hardware essentials

Specifications

Dimensions:	412 x 412 x 346 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	300 cm
Filament diameter:	1.75 mm	Max print width:	300 cm
Nozzle diameter:	0.4 mm	Max print height:	300 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	ethernet	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	27,000
Camera included:	no	Our item no:	DKI00233
Printing technique:	TFDM FFF	Printer extruder max temp:	260 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts. This kit is supplied with black aluminium extrusions.

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£1,067.95

£889.96 Excl. 20% VAT

In stock

LDO Voron Trident rev D 300 3D printer KIT Space Grey

Zoom in

2
1
0

Description

THE LDO Voron Trident 300 3D Printer Kit

The LDO Voron Trident 300 3D Printer Kit is a top-quality, large-volume, high-speed 3D printer from the premium Voron experts. Trident is perfect for printing heat-sensitive thermoplastics such as ABS and aesthetic thermoplastics like PLA. Sometimes called the "build your own Bambu", the kit includes most of the hardware essentials, and self-assembly is required.

Enclosed traditional coreXY printer
Ideal for large-format, high-speed printing
Includes most hardware essentials

Specifications

Dimensions:	412 x 412 x 346 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	300 cm
Filament diameter:	1.75 mm	Max print width:	300 cm
Nozzle diameter:	0.4 mm	Max print height:	300 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	ethernet	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	27,000
Camera included:	no	Our item no:	DKI00299
Printing technique:	TFDM FFF	Printer extruder max temp:	260 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts. This kit is supplied with black aluminium extrusions.

Order now, we can ship this on Monday!

£1,067.95

£889.96 Excl. 20% VAT

In stock

LDO Voron 2.4 rev D 350 KIT Black

Zoom in

1
0

Description

BUILT FOR ACCESSIBLE HIGH-SPEED 3D PRINTING

Utilizing a CoreXY, linear rails, and belt z-axis setup with Klipper firmware, Voron 2.4 is designed to deliver fantastic print quality at amazingly fast 3D printing speeds. Assembling this DIY machine is more accessible than ever with LDO's Voron 2.4 Kit which sources/manufactures a significant portion of the hardware needed to get your machine up and running. Containing the best price-to-performance ratio of components, you'll find that you too can build a speedy production-quality FDM 3D printer right from your benchtop.

Key Features of the LDO Voron 2.4 R2 (Rev D) 3D Printer Kit:

Large Print Volume 350 × 350 × 350mm.
Includes majority of the hardware essentials.
All are provided with printer parts (3D printed parts are required).
Premium parts sourced or made by trusted manufacturer LDO.
E3D hotend, Bondtech extruder parts included.
Raspberry PI is required to complete the build.
All necessary wiring is pre-cut and pre-wired.
Bonus kits, accessories, and tools included.
Klicky Mod kit, Nevermore Filter, LED lighting parts, Input Shaper tool kit, etc.
Acrylic panels included for enclosure.
Stainless Steel Linear Rails.

Specifications

Dimensions:	495 x 495 x 420 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	350 cm
Filament diameter:	1.75 mm	Max print width:	350 cm
Nozzle diameter:	0.4 mm	Max print height:	350 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	42,875
Camera included:	no	Our item no:	DKI00232
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts. This kit is supplied with black aluminium extrusions.

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£1,124.00

£936.67 Excl. 20% VAT

In stock

LDO Voron 2.4 rev D 350 3D printer KIT Space Grey

Zoom in

2
1
0

Description

Utilizing a CoreXY, linear rails, and belt z-axis setup with Klipper firmware, Voron 2.4 is designed to deliver fantastic print quality at amazingly fast 3D printing speeds. Assembling this DIY machine is more accessible than ever with LDO's Voron 2.4 Kit which sources/manufactures a significant portion of the hardware needed to get your machine up and running. Containing the best price-to-performance ratio of components, you'll find that you too can build a speedy production-quality FDM 3D printer right from your benchtop.

Key Features of the LDO Voron 2.4 R2 (Rev D) 3D Printer Kit:

Large Print Volume 350 × 350 × 350mm.
Includes majority of the hardware essentials.
All are provided with printer parts (3D printed parts are required).
Premium parts sourced or made by trusted manufacturer LDO.
E3D hotend, Bondtech extruder parts included.
Raspberry PI is required to complete the build.
All necessary wiring is pre-cut and pre-wired.
Bonus kits, accessories, and tools included.
Klicky Mod kit, Nevermore Filter, LED lighting parts, Input Shaper tool kit, etc.
Acrylic panels included for enclosure.
Stainless Steel Linear Rails.

Specifications

Dimensions:	495 x 495 x 420 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	350 cm
Filament diameter:	1.75 mm	Max print width:	350 cm
Nozzle diameter:	0.4 mm	Max print height:	350 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	42,875
Camera included:	no	Our item no:	DKI00298
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts.

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£1,124.00

£936.67 Excl. 20% VAT

In stock

Original Prusa CORE One 3D Printer

Zoom in

2
1
0

Description The CORE One is a fully enclosed CoreXY 3D printer with active temperature control designed for top print quality and speed. Easy to set up and made to last, this rugged machine is perfect for beginners and professionals alike. Designed and manufactured in the EU.

Whether you're new to 3D printing or a seasoned expert, Prusa CORE One ticks all the boxes for a reliable all-around machine. Featuring an enclosed chamber and CoreXY design, it combines high-speed printing and maximum print quality with a large 250×220×270mm print area. And there are plenty of clever design choices, e.g., an all-steel exoskeleton frame for maximum firmness and robustness. You’ll be ready to print your first model in minutes thanks to intuitive software and one-click printing.

The CORE One is a 3D printing workhorse engineered in the proven Prusa tradition. Designed with a "made to last" philosophy and made from premium materials, the CORE One offers exceptional reliability with minimal maintenance. The enclosed chamber, capable of reaching up to 55 °C, features active temperature control for high-quality printing across a wide range of materials from PLA and PETG (even with the door closed) to more demanding materials like ASA, PC, or Nylon.

Unpack the printer, perform a one-time calibration, and you’re ready to go. Equipped with advanced sensors for hassle-free printing, the CORE One is a true “start and forget” machine. Simply start your print and let the printer handle the rest, from fully automatic first-layer calibration to pausing the print and sending a notification if the filament runs out.

You can be sure that with our internally developed, quality-focused print profiles, your models will turn out exactly the way they were designed, with perfect dimensional accuracy. CORE One takes advantage of the upgraded Nextruder with 360° cooling that enables flawless printing of 75° overhangs, saving both time and material.

The chamber is as compact as possible, with a cleverly designed recess on each side to minimize its volume. This allows the chamber to quickly reach higher temperatures (up to 55°C), enabling you to print ASA, ABS, PC, PA (Nylons), and other advanced materials smoothly, without warping. The automatic ventilation system and active temperature control enable flawless printing of PLA - even with the door completely closed!

Specifications

Dimensions:	415 x 444 x 555 mm	Printer has USB:	yes
Input voltage:	230CV	Max print depth:	22 cm
Filament diameter:	1.75 mm	Max print width:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	27 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Prusa	Heatbed max temp:	120 °C
Weight:	22.5 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	14.85
Camera included:		Our item no:	DKI00313
Printing technique:	TFDM FFF	Printer extruder max temp:	290 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£1,138.50

£948.75 Excl. 20% VAT

In stock

Quantity	Product
No products
Total: £0.00

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Filament 3D Printers

Popular brands

Elegoo Neptune 4 Pro

Key Features:

Quiet Yet Powerful Printing, Fast

Smoother Printing

Flexible Filament Support

Precise Temperature Control and Efficient Heating

Easy to Use

Creality 3D Ender 3 V3 KE

Key Features:

Fast Print Speeds

Intuitive UI

Smart Creality OS

Wide Filament Choice

Monitor Prints Easily

Additional Features

Creality K1 Max

Key Features:

Faster Print Speeds

Practical and Fun Applications

Wide Range of Supported Filament

Smart Features Make Printing Easier

BUILT FOR ACCESSIBLE HIGH-SPEED 3D PRINTING

Popular products