Red

1 - 15 of 15

123-3D Filament ABS Red 1.75mm 1 kg DHM00147

Description 123-3D Own brand Filament ABS 1.75mm shrinks little and emits fewer irritants. In addition, this filament retains its shape down to a temperature of -40 ˚ C and provides a shiny surface.

Key Features:

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Material:	ABS	Roundness:	>95%
Filament diameter:	1.75 mm	Density:	1.05
Heated bed temp:	110 °C	Outer diameter:	Ø 20.0 cm
Colour:	Red	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	235 - 260 °C	Spool width:	6.8 cm
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	1 kg	Our item no:	DHM00147
Brand:	123-3D	Replaces item no:	DFP01169

Colour:

Order now, we can ship this on Monday!

£15.95

£13.29 Excl. 20% VAT

In stock

Polymaker PolyLite red ABS filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a bright red colour. ABS is a very strong plastic with which you can print hard and heat-resistant objects. This filament offers you excellent print quality with few unpleasant odours during printing.

The ideal print temperature is 245°C to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90°C to 100°C.

Read more about printing with ABS filament here.

Specifications

Material:	ABS	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Colour:	Red	Filament print speed:	-
Nozzle temp range:	245 - 265 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14044
Brand:	Polymaker

Colour:

Order now, we can ship this on Monday!

£18.00

£15.00 Excl. 20% VAT

In stock

eSun ABS+ filament 1.75mm Red 1kg

Zoom in

Description eSun's red ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Material:	ABS+	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Inner diameter:	Ø 5.0 cm
Colour:	Red	Spool width:	6.5 cm
Nozzle temp range:	230 - 270 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20027

Colour:

Order now, we can ship this on Monday!

£12.00

£10.00 Excl. 20% VAT

In stock

LDO ABS Filament Red 1kg 1.75mm

Zoom in

Description

Elevate your 3D printing projects with LDO’s high-performance ABS filament. Designed for professionals who demand strength, durability, and reliability, this filament ensures your prints are of the highest quality.

Key Features:

Exceptional Strength and Durability: Perfect for creating robust and long-lasting parts.
Great Layer Adhesion: Ensures strong, impact-resistant prints.
AMS and MMU Friendly: Compatible with Automatic Material Systems (AMS) and Multi-Material Units (MMU) for seamless multi-material printing.
High-Temperature Resistance: Ideal for applications requiring heat resistance.
Vibrant Colours: Available in a variety of colours to suit your project needs.

Why Choose LDO ABS Filament?

LDO ABS Filament is engineered to deliver first-class surfaces and sharp details, making it the go-to choice for professionals. Whether you’re working on prototypes, functional parts, or artistic creations, this filament provides the reliability and performance you need.

Technical Data Filament

3D Printing Filament material: ABS
Diameter (mm): 1.75 +/- 0.02mm
Suggested printing speed: 30 – 100mm/s
Net Weight: 1KG/Roll
Density (g/cm3): 1.1
Heat Distortion Temp (°C): 90
Print Temp (°C): 220-260
Bed Temp (°C): 90-110
Chamber temp (closed chamber necessary): 50 – 70C
Melt Index (g/10min): 3.0
Tensile Strength (Mpa): 41.49
Elongation at break: 8.21%
Impact Strength (KJ/m2): 17.172

Spool Dimensions:

Width (mm): 60
Outer Diameter (mm): 195
Inner Diameter (mm): 55
Weight Empty Spool (g): 158.5

Specifications

Material:	ABS	Outer diameter:	Ø 21.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90 - 110 °C	Spool width:	8.0 cm
Colour:	Red	Filament print speed:	-
Nozzle temp range:	260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP16157
Brand:	LDO

Colour:

Black

Blue

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£15.90

£13.25 Excl. 20% VAT

In stock

BASF Ultrafuse red ABS filament 1.75mm, 0.75kg

Zoom in

Description The red BASF ABS filament (1.75mm) has a deep colour and is suitable for 3D printing many different objects. With this versatile high quality ABS, you can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Material:	ABS	RAL colour no:	3020
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Inner diameter:	Ø 5.2 cm
Colour:	Red	Spool width:	5.2 cm
Nozzle temp range:	230 - 255 °C	Filament print speed:	-
Amount:	0.75 kg	Hazard class:	n/a
Brand:	BASF	Our item no:	DFB00020

Colour:

Order now, we can ship this on Monday!

£25.81

£21.51 Excl. 20% VAT

In stock

123-3D Adhesive Spray (150 ml)

Zoom in

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Volume:	150 ml	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR02393
Download SDS:	Download

Order now, we can ship this on Monday!

£6.50

£5.42 Excl. 20% VAT

In stock

123-3D Filament Spool Holder

Zoom in

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Brand:	123-3D	Hazard class:	n/a
Weight:	0.325 kg	Our item no:	DFR00005

Order now, we can ship this on Monday!

£11.50

£9.58 Excl. 20% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007
Brand:	Tesa

Order now, we can ship this on Monday!

£3.90

£3.25 Excl. 20% VAT

In stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Material:	Steel	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR00620

Order now, we can ship this on Monday!

£8.25

£6.88 Excl. 20% VAT

In stock

eSun eVacuum kit Pro 3

Zoom in

Description Keep your filament dry and dust free with the eSun eVacuum kit Pro 3. This kit allows you to vacuum seal your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-colored closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Dimensions:	32 x 32 x 102 mm	Weight:	0.075 kg
Voltage:	5 v	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01277

Order now, we can ship this on Monday!

£20.39

£16.99 Excl. 20% VAT

In stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007
Brand:	Modifi3D

Extra information

Instructional video

Order now, we can ship this on Monday!

£29.95

£24.96 Excl. 20% VAT

In stock

SUNLU Filament Connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different color. This way you can create personalized 3D prints with unique colorful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Sunlu	Our item no:	DAR01819
Manual:	Download

Order now, we can ship this on Monday!

£39.95

£33.29 Excl. 20% VAT

In stock

Modifi3D Pro 2 repair/modification tool

Zoom in

Description The Modifi3D Pro 2 is the ultimate post-processing tool for your 3D printed objects. With this advanced tool, you can easily create repairs, modifications, and superfine finishes, faster, more precisely, and more comfortably than ever.

Thanks to its increased power, the Modifi3D PRO2 reaches temperatures of up to 480ºC (896ºF), making it suitable for a wide range of applications and tips. The tool heats up to 200ºC (392ºF) in less than 10 seconds.

The Pro 2 comes with 12 high-quality, specially coated tips that are easily interchangeable. This coating prevents plastic from sticking and ensures a long lifespan and precise results.

Knife tip: for cutting away support material
Large blade tip: for cutting away support material
Needle tip: for clearing small holes
Standard point: for general use
Spoon point: for removing threads and leveling surfaces
Large spoon tip: for removing threads and leveling surfaces
Detail point: for updating detail work
Smoothing point: for leveling surfaces
Countersinking point: for making countersink holes
Insertion point: for inserting metal parts
Pressure point: for pressing down or leveling surfaces.
Chisel point: for cutting off or shaping edges and corners straight.

All tips are fully compatible with the previous Modifi3D Pro version, allowing existing accessories to be used as usual.

Specifications

Power rating:	60 W	Brand:	Modifi3D
Max operating temp:	480 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR02554
Cable length:	150 cm

Order now, we can ship this on Monday!

£60.00

£50.00 Excl. 20% VAT

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	30 W	Brand:	Modifi3D
Max operating temp:	450 °C	Weight:	0.12 kg
Voltage:	24 v	Hazard class:	n/a
Cable length:	150 cm	Our item no:	DGS00090

Order now, we can ship this on Monday!

£65.50

£54.58 Excl. 20% VAT

In stock

BIQU Panda Storage Rack for 3D Print Filament

Zoom in

Description The BIQU Panda Feed Rack is a robust and space-saving storage system for your 3D printer filaments. Thanks to its stackable design and narrow depth, this rack accommodates up to 40+ spools without taking up unnecessary space on your workspace. Ideal for home use or in a professional workshop.

Specifications