Nylon Dreamer FlashForge 3D printer brand 3D filament F136-C1 Nylon pellets, 1kg (123-3D brand) 123-3d.co.uk

Quantity	Product
No products
Total: £0.00

F136-C1 Nylon pellets, 1kg (123-3D brand)

Description Nylon pellets can be used by enthusiastic DIYers to make their own nylon filament. The pellets can also be used with a Direct pellet extruder on a 3D printer. This bag contains 1 kg of undried pellets, to which no colorants have been added.

Specifications

Material:	Nylon	Brand:	123-3D
Colour:	Neutral	Hazard class:	n/a
Amount:	1 kg	Our item no:	DPL00008

Order now, we can ship this today!

£20.93

£17.44 Excl. 20% VAT

In stock

REAL filament white 1.75mm PA 0.5 kg

Zoom in

Description The white PA (1.75mm) is a professional, very strong nylon filament. This 3D printing material has excellent mechanical and chemical properties. PA is also distinguished by its very low water absorption. The material can be printed at a relatively low temperature and can be used on almost all FFF and FDM printers.

Specifications

Material:	PA Low Warp	Roundness:	>95%
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	80 - 105 °C	Inner diameter:	Ø 5.6 cm
Colour:	White	Spool width:	7.0 cm
Nozzle temp range:	245 - 280 °C	Filament print speed:	-
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFN02014
Length:	200 m	Replaces item no:	DFN02010
Brand:	REAL

Order now, we can ship this today!

£31.88

£26.57 Excl. 20% VAT

In stock

REAL filament black 1.75mm PA 0.5 kg

Zoom in

Description The black PA (1.75mm) is a professional, very strong nylon filament. This 3D printing material has excellent mechanical and chemical properties. PA is also distinguished by its very low water absorption. The material can be printed at a relatively low temperature and can be used on almost all FFF and FDM printers.

Specifications

Material:	PA Low Warp	Roundness:	>95%
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	80 - 105 °C	Inner diameter:	Ø 5.6 cm
Colour:	Black	Spool width:	7.0 cm
Nozzle temp range:	245 - 280 °C	Filament print speed:	-
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFN02012
Length:	200 m	Replaces item no:	DFN02002
Brand:	REAL

Order now, we can ship this today!

£31.88

£26.57 Excl. 20% VAT

In stock

BASF Ultrafuse neutral PA filament 1.75mm, 0.75kg

Zoom in

Description This neutral Ultrafuse PA filament from BASF consists of polyamide and is characterised by high resistance to deformation and great flexibility. This makes it a suitable filament type for use in moving parts. The neutral filament has a diameter of 1.75mm. The print temperature is between 220°C and 250°C, and the glass transition temperature is 49°C.

Specifications

Material:	PA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm
Colour:	Neutral	Filament print speed:	-
Nozzle temp range:	220 - 250 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00046
Brand:	BASF

Order now, we can ship this today!

£44.58

£37.15 Excl. 20% VAT

In stock

BASF Ultrafuse black PAHT CF15 filament 1.75mm, 0.75kg

Zoom in

Description This black Ultrafuse PAHT CF15 filament from BASF is made of polyamide with extra high heat resistance. The filament can withstand prolonged exposure to temperatures of up to 130°C. The black-coloured filament has a diameter of 1.75mm. The print temperature is between 260°C and 280°C.

Specifications

Material:	PAHT CF15	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	100 - 120 °C	Spool width:	5.2 cm
Colour:	Black	Filament print speed:	-
Nozzle temp range:	260 - 280 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00048
Brand:	BASF

Order now, we can ship this today!

£68.74

£57.28 Excl. 20% VAT

In stock

colorFabb PA NEAT filament black 1.75mm 0.75 kg

Zoom in

Description ColorFabb PA NEAT filament is colorFabb's new, heat-resistant filament made of polyamide (nylon). Even at a temperature of 120 °C, a print from this filament can function well. This makes it a perfect material for creating professional prints that last longer. PA has excellent mechanical and chemical properties. It is also distinguished by its very low water absorption. With PA NEAT you have a strong filament that does not deform: ideal for functional prints.

Nylon filaments absorb moisture and must be thoroughly dried before printing. This filament has a drying advice of 4 to 6 hours at a temperature of 70 to 80 degrees.

Specifications

Material:	PA NEAT	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Inner diameter:	Ø 5.2 cm
Colour:	Black	Spool width:	5.5 cm
Nozzle temp range:	265 - 290 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13261

Order now, we can ship this today!

£41.00

£34.17 Excl. 20% VAT

In stock

colorFabb matte black PA-CF low warp filament 1.75mm, 0.7kg

Zoom in

Description The matte black colorFabb PA-CF low warp filament (1.75mm) is professional and very strong. The most important properties are the high tensile strength, great heat resistance and many carbon fibres that are contained in this filament. With the colorFabb PA-CF low warp filament you'll have almost no problems with warping (distortion) and you can also print large 3D prints with confidence.

The ideal printing temperature for this nylon filament is 260°C to 280°C. For best results, set the heated bed to 50°C.

Specifications

Material:	PA-CF	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Inner diameter:	Ø 5.2 cm
Colour:	Matte Black	Spool width:	5.5 cm
Nozzle temp range:	260 - 280 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13068
Length:	250 m

Order now, we can ship this today!

£74.00

£61.67 Excl. 20% VAT

In stock

eSun ePA Nylon filament 1.75mm Neutral 1kg

Zoom in

Description

Specifications

Material:	ePA	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Inner diameter:	Ø 5.0 cm
Colour:	Neutral	Spool width:	6.5 cm
Nozzle temp range:	240 - 260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20038

Order now, we can ship this today!

£26.00

£21.67 Excl. 20% VAT

In stock

eSun ePA-CF Nylon with carbon fibre filament 1.75mm Neutral 1kg

Zoom in

Description

Specifications

Material:	ePA-CF	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Inner diameter:	Ø 5.0 cm
Colour:	Black	Spool width:	6.5 cm
Nozzle temp range:	240 - 260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20040

Order now, we can ship this today!

£35.00

£29.17 Excl. 20% VAT

In stock

eSun ePA12 filament 1.75mm Black 1 kg (Nylon)

Zoom in

Description This black eSun ePA12 filament is ideal for making durable prints. ePA12 prints very well and is more resistant to wear. It is based on PA12 and absorbs less moisture than other filaments, meaning your print is less affected by humidity and temperature changes. The filament shrinks little, is not easy to deform and does not break during printing.

This filament is strong, has a high impact resistance and is very resistant to higher temperatures. Prints from ePA12 will only deform at 100°C, which makes it ideal for printing parts that have to perform at higher temperatures.

Specifications

Material:	ePA12	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 90 °C	Inner diameter:	Ø 5.0 cm
Colour:	Black	Spool width:	6.5 cm
Nozzle temp range:	260 - 290 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20234

Order now, we can ship this today!

£50.00

£41.67 Excl. 20% VAT

In stock

eSun ePA12 filament 1.75mm White 1 kg (Nylon)

Zoom in

Description This white eSun ePA12 filament is ideal for making durable prints. ePA12 prints very well and is more resistant to wear. It is based on PA12 and absorbs less moisture than other filaments, meaning your print is less affected by humidity and temperature changes. The filament shrinks little, is not easy to deform and does not break during printing.

This filament is strong, has a high impact resistance and is very resistant to higher temperatures. Prints from ePA12 will only deform at 100°C, which makes it ideal for printing parts that have to perform at higher temperatures.

Specifications

Material:	ePA12	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 90 °C	Inner diameter:	Ø 5.0 cm
Colour:	White	Spool width:	6.5 cm
Nozzle temp range:	260 - 290 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20235

Order now, we can ship this today!

£50.00

£41.67 Excl. 20% VAT

In stock

eSun ePA12-CF filament 1.75mm Natural 1 kg (Nylon)

Zoom in

Description This ePA12-CF filament from eSun is based on PA12 with the additional addition of 15% carbon fibers. These enhance the strength, severity and strength of the nylon and even make it possible to use this filament as a replacement for metal in many situations. Because it absorbs little moisture, prints made from this material are more resistant to humidity and temperature changes. This filament is ideal for printing parts such as gears, because it is self-lubricating and can withstand frequent use.

For long-term use, ePA12-CF can function well at temperatures up to 120 °C. For short-term use it can withstand a temperature of up to 160 °C. The filament shrinks little, is not easy to deform and does not break during printing. It is refined and has a matte appearance.

Specifications

Material:	ePA12-CF	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Inner diameter:	Ø 5.0 cm
Colour:	Natural	Spool width:	6.5 cm
Nozzle temp range:	270 - 300 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20236

Order now, we can ship this today!

£69.00

£57.50 Excl. 20% VAT

In stock

eSun ePAHT-CF filament 1.75mm Natural 0.75 kg

Zoom in

Description This eSun ePAHT-CF filament is based on PA6 with an addition of 15% carbon fibers. The high strength, stiffness, mechanical and thermal properties are even better than other nylon filaments from eSun. In many cases, ePAHT-CF can be used as a replacement for metal. This makes it perfect for printing robot, drone and aviation parts.

For long-term use, ePAHT-CF can function well at temperatures up to 150 °C. For short-term use it can withstand a temperature of up to 180 °C. The filament shrinks little, is not easy to deform and does not break during printing. It is refined and has a matte appearance.

Please note :

For best results, dry ePAHT-CF at 70 °C/>12H and print with a skirt around your model.
Because it is not easy to bend, it is advisable to avoid excessive bending of the wire as much as possible.
The added carbon fibers in ePAHT-CF ensure that you can better print this filament with a hard steel nozzle or a ruby nozzle. We also recommend a hard steel extruder.

Specifications

Material:	ePAHT-CF	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Inner diameter:	Ø 5.6 cm
Colour:	Natural	Spool width:	6.3 cm
Nozzle temp range:	260 - 300 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFE20238

£74.50

£62.08 Excl. 20% VAT

14 day delivery

Polymaker CoPA black Nylon filament 1.75mm, 0.75kg

Zoom in

Description The black Polymaker CoPA filament is very strong, tough and heat resistant up to 180˚C. This filament is produced with Warp Free technology, so you will not suffer from warping (distortion). The filament comes in the colour black, has a diameter of 1.75mm and is easy to print.

Specifications

Material:	CoPA Nylon	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 50 °C	Spool width:	4.5 cm
Colour:	Black	Filament print speed:	-
Nozzle temp range:	250 - 270 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14002
Brand:	Polymaker

Order now, we can ship this today!

£48.80

£40.67 Excl. 20% VAT

In stock

Polymaker Nylon CoPA filament 1.75mm Clear 0.75 kg

Zoom in

Description The neutral Polymaker CoPA filament is very strong, tough and heat-resistant up to 180˚C. This filament is produced with Warp Free technology, so you do not suffer from warping (deformation). The black filament has a diameter of 1.75mm and is easy to print.

Specifications

Material:	CoPA Nylon	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 50 °C	Spool width:	4.5 cm
Colour:	Transparent	Filament print speed:	-
Nozzle temp range:	250 - 270 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14285
Brand:	Polymaker

Order now, we can ship this today!

£59.80

£49.83 Excl. 20% VAT

In stock

Polymaker Polymide PA12-CF filament 1.75mm Black 0.5 kg

Zoom in

Description Polymide PA12-CF filament from Polymaker is a PA 12 (Nylon 12) filament with carbon fibers. Due to the low moisture sensitivity of PA12, this filament has excellent mechanical and thermal properties. Polymide has high shock resistance, minimal wear and can withstand extreme temperatures. The Warp-Free technology ensures that this material can be printed easily and without warping.

Please note: you need a wear-resistant/hardened nozzle to print with this filament.
Annealing: 6 hours at 80℃

Specifications

Material:	PA12-CF	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 50 °C	Spool width:	4.5 cm
Colour:	Black	Filament print speed:	-
Nozzle temp range:	260 - 300 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP14287
Brand:	Polymaker

Order now, we can ship this today!

£65.00

£54.17 Excl. 20% VAT

In stock

Polymaker Polymide PA6-CF filament 1.75mm Black 0.5 kg

Zoom in

Description Polymaker PolyMide PA6-CF filament in black is a carbon fiber reinforced nylon. This material has very good thermal properties and does not affect layer adhesion. The filament contains 20% ground carbon fibers, so we recommend using a wear-resistant nozzle.

This material requires a heat treatment process of 6 hours at a temperature of 80 degrees Celsius. This process changes the physical and sometimes chemical properties of the material to increase its ductility and reduce its hardness to make it more workable.

The black filament has a diameter of 1.75mm and a weight of 0.5 kg.

Specifications

Material:	PA6-CF	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 50 °C	Spool width:	4.5 cm
Colour:	Black	Filament print speed:	-
Nozzle temp range:	280 - 300 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP14288
Brand:	Polymaker

Order now, we can ship this today!

£46.00

£38.33 Excl. 20% VAT

In stock

Polymaker PolyMide black PA6-CF filament 1.75mm, 2kg

Zoom in

Description Polymaker PolyMide PA6-CF filament in the colour black is a carbon fibre reinforced nylon. This material has very good thermal properties and does not affect the layer adhesion. The filament contains 20% crushed carbon fibres, so we recommend using a wear-resistant nozzle. The black filament has a diameter of 1.75mm and a weight of 2kg.

Specifications

Material:	PA6-CF	Outer diameter:	Ø 26.8 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	25 - 50 °C	Spool width:	10.0 cm
Colour:	Black	Filament print speed:	-
Nozzle temp range:	280 - 300 °C	Hazard class:	n/a
Amount:	2 kg	Our item no:	DFP14124
Brand:	Polymaker

Order now, we can ship this today!

£165.98

£138.32 Excl. 20% VAT

In stock

3DLAC Nylon (30ml)

Zoom in

Description 3DLAC Nylon is ideal for creating strong, detailed prints with a long lifespan. It is specially designed to work seamlessly with nylon filaments. This allows you to produce precise, high-quality prints. 3DNylon ensures better bed adhesion of nylon filaments, which makes printing detailed models easier. The filament layers will form a strong bond and will not come loose during printing. This binding extends the life of your print and helps reduce fragility. Finally, it ensures that your print does not distort or curl during the printing process. The user-friendly brush makes it easy to use this product.

Specifications

Dimensions:	55 mm	Brand:	3DLAC
Diameter:	37 mm	Hazard class:	3
Volume:	30ml	Our item no:	DAR01371

Order now, we can ship this today!

£17.95

£14.96 Excl. 20% VAT

In stock

Magigoo Pro 3D glue stick for PA filament, 50ml

Zoom in

Description This Magigoo Pro 3D glue stick is specially designed for printing with PA filament. PA, or polyamide, is known as a challenging filament type that adheres poorly to the print bed and warps quickly. This adhesive stick offers the solution and ensures perfect adhesion of PA-printed objects. Once your print has cooled down, you can simply remove it. This means you no longer need any tools! The package contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Type:	glue stick	Hazard class:	n/a
Volume:	50	Our item no:	DCP00210

Order now, we can ship this today!

£19.85

£16.54 Excl. 20% VAT

In stock

Hygrometer round

Zoom in

Description In addition to a moisture percentage, the round hygrometer also displays the temperature. Its round shape makes it easy to install. The hygrometer is ideal for making a filament storage box.

*The hygrometer is delivered without battery.

Specifications

Colour:	Black	Hazard class:	n/a
Brand:	123-3D	Our item no:	DRW00020

Order now, we can ship this today!

£7.40

£6.17 Excl. 20% VAT

In stock

Spectrum Filament Nylon PA6 Low Warp 1.75 mm Natural 0.5 kg

Zoom in

1
0

Description Spectrum Nylon PA6 Low Warp is a strong filament that shrinks little. In addition, the filament has a high impact resistance, excellent mechanical properties and is resistant to fuels and oils. Thanks to the materials this filament is made of, it is ideal for use in projects where friction is caused. The components also have good electrical insulation. This filament is 1.75 mm, comes in the color Natural and has 0.5 Kg on the spool.

Tip: To get the best results from this filament, it is important to store it in a dry and dark place with less than 15% humidity. It is also recommended to dry the filament before using it.

Specifications

Material:	PA6 Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	85 - 100 °C	Spool width:	5.5 cm
Colour:	Neutral	Filament print speed:	-
Nozzle temp range:	250 - 280 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFS10118
Brand:	Spectrum

£20.95

£17.46 Excl. 20% VAT

14 day delivery

Spectrum Filament Nylon PA6 Low Warp CF15S 1.75 mm Black 0.5 kg

Zoom in

1
0

Description Nylon PA6 Low Warp CF15S is a strong and low-shrinkage material that has the advantages of carbon fibers. In addition, it is stiff, dampens vibration and is wear-resistant. This filament is resistant to chemical materials and has a consistent operation, even at higher temperatures up to 180 ˚ C. This makes the material an ideal choice for 3D prints that must withstand heavy conditions. The filament is specially designed for better flow, resulting in better adhesion. Thanks to the 15% added carbon fibers, the stiffness and tensile strength have been significantly improved. Finally, the carbon fibers give the filament a matte look, making the layer lines less visible. This filament is 1.75 mm, comes in the color Black and has 0.5 Kg on the spool.

Specifications

Material:	PA6 Low Warp CF15S	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 80 °C	Spool width:	5.5 cm
Colour:	Black	Filament print speed:	-
Nozzle temp range:	250 - 280 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFS10119
Brand:	Spectrum

£31.85

£26.54 Excl. 20% VAT

14 day delivery

Spectrum Filament Nylon PA6 Low Warp GF30 1.75 mm Black 1 kg

Zoom in

1
0

Description Nylon PA6 Low Warp GF30 is a nylon filament reinforced with 30% glass fibers. This makes it a hard filament with high heat resistance (maximum 180 ˚ C). In addition, the filament has excellent resistance to chemicals, is resistant to wear and shrinks little. Nylon PA6 Low Warp has good adhesion between layers and can be printed without a heated print chamber. This filament is 1.75 mm, comes in the color Black and has 1 Kg on the spool.

Specifications

Material:	PA6 Low Warp GF30	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.7 cm
Colour:	Black	Filament print speed:	-
Nozzle temp range:	250 - 280 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS10120
Brand:	Spectrum

£55.45

£46.21 Excl. 20% VAT

14 day delivery

123-3D Filament PA12 CF15 Black 1.75mm 1kg

Zoom in

1
0

Description 123-3D Own Brand Filament PA12 CF15 1.75 mm is a lightweight, durable nylon filament with 15% added carbon particles. It is known for its exceptional strength, stiffness, and excellent thermal resistance. It also has an improved layer adhesion and low shrinkage.

Key Features:

15% added carbon particles
10% lighter than PA CF15
Thermal resistance up to 170 ˚ C
Minimal shrinkage

Applications: Ideal for making structural parts in the aerospace industry, lightweight and durable drone parts, advanced prototypes and functional models.

Please note: Due to the added carbon fibres it is recommended to use a hardened steel nozzle or ruby nozzle of 0.6mm or larger.

Specifications

Material:	PA12 CF15	Roundness:	>95%
Filament diameter:	1.75 mm	Density:	1.27
Heated bed temp:	80 - 130 °C	Outer diameter:	Ø 20.0 cm
Colour:	Black	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	255 - 295 °C	Spool width:	6.8 cm
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	1 kg	Our item no:	DHM00237
Brand:	123-3D

Order now, we can ship this today!

£76.15

£63.46 Excl. 20% VAT

In stock

123-3D Filament PA6 CF15 Black 1.75mm 1kg

Zoom in

1
0

Description 123-3D Own Brand Filament PA6 CF15 1.75 mm is PA6 filament with 15% added carbon particles, which increases the mechanical strength. Moisture absorption is reduced by 50% and water is absorbed 4 times less quickly than with normal PA6.

Key Features:

Up to 180 ˚ C for max. 200 hours, up to 150 ˚ C for max. 20,000 hours
Wear-resistant and high mechanical strength
Good layer adhesion
Prints have high hardness and stiffness

Applications: Ideal for making functional prototypes, tools, gears and ring and plate seals that require increased resistance to chemicals and corrosion.

Please note: Due to the added carbon fibers it is recommended to use a hardened steel nozzle or ruby nozzle of 0.6mm or larger.

Specifications

Material:	PA6 CF15	Roundness:	>95%
Filament diameter:	1.75 mm	Density:	1.25
Heated bed temp:	50 - 80 °C	Outer diameter:	Ø 20.0 cm
Colour:	Black	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	260 - 295 °C	Spool width:	6.8 cm
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	1 kg	Our item no:	DHM00238
Brand:	123-3D

Order now, we can ship this today!

£59.50

£49.58 Excl. 20% VAT

In stock

123-3D PA6 Pellets Black 5 kg

Zoom in

Description The 123-3D PA6 Pellets Black are high-quality nylon (PA6) pellets, ideal for users who want to extrude their own filament or print directly with a pellet extruder. These black pellets offer excellent mechanical properties and are suitable for various technical applications.

Specifications

Colour:	Black	Hazard class:	n/a
Brand:	123-3D	Our item no:	DPL00049
Weight:	5 kg

£60.00

£50.00 Excl. 20% VAT

14 day delivery

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Diameter:	30 mm	Brand:	3DLAC
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this today!

£6.29

£5.24 Excl. 20% VAT

In stock

3DLAC stick (80ml)

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884
Brand:	3DLAC

Order now, we can ship this today!

£5.10

£4.25 Excl. 20% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007
Brand:	Tesa

Order now, we can ship this today!

£3.90

£3.25 Excl. 20% VAT

In stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Material:	Steel	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR00620

Order now, we can ship this today!

£8.25

£6.88 Excl. 20% VAT

In stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Brand:	Smooth-On	Hazard class:	n/a
Volume:	181 grams	Our item no:	DAR00876

Order now, we can ship this today!

£20.49

£17.08 Excl. 20% VAT

In stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Brand:	Smooth-On	Hazard class:	n/a
Volume:	644 grams	Our item no:	DAR00877

Order now, we can ship this today!

£51.50

£42.92 Excl. 20% VAT

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	30 W	Brand:	Modifi3D
Max operating temp:	450 °C	Weight:	0.12 kg
Voltage:	24 v	Hazard class:	n/a
Cable length:	150 cm	Our item no:	DGS00090

Order now, we can ship this today!

£65.50

£54.58 Excl. 20% VAT

In stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007
Brand:	Modifi3D

Extra information

Instructional video

Order now, we can ship this today!

£29.95

£24.96 Excl. 20% VAT

In stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Dimensions:	265 x 118 x 274 mm	Voltage:	24 v
Power rating:	48 W	Brand:	Sunlu
Input voltage:	100-240V	Weight:	11.9 kg
Temp range:	35-70 °C	Hazard class:	n/a
Colour:	Black	Our item no:	DAR00698

Order now, we can ship this today!

£44.90

£37.42 Excl. 20% VAT

In stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents your filament from getting damp. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or one 3kg roll. 3kg Polymaker brand spools are compatible with this drybox, but our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Dimensions:	315 x 190 x 310 mm	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DAR00634
Weight:	1.15 kg

Order now, we can ship this today!

£55.98

£46.65 Excl. 20% VAT

In stock

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, bathroom or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Colour:	White	Hazard class:	n/a
Brand:	123-3D	Our item no:	DRW00069

Order now, we can ship this today!

£9.95

£8.29 Excl. 20% VAT

In stock

eSun eVacuum kit Pro 3

Zoom in

Description Keep your filament dry and dust free with the eSun eVacuum kit Pro 3. This kit allows you to vacuum seal your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-colored closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Dimensions:	32 x 32 x 102 mm	Weight:	0.075 kg
Voltage:	5 v	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01277

Order now, we can ship this today!

£20.39

£16.99 Excl. 20% VAT

In stock

eSun eVacuum kit

Zoom in

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Brand:	eSun	Our item no:	DAR01365
Hazard class:	n/a

£21.50 (sold out)

£17.92 Excl. 20% VAT

SUNLU FilaDryer S4

Zoom in

2
1
0

Description Keep your filament dry and in perfect condition with the S4 Drybox from SUNLU. There is room for no less than 4 spools of 1 kg, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0 mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458 x 218 x 312 mm.

Specifications

Dimensions:	516 x 278 x 350 mm	Weight:	4.8 kg
Power rating:	320 W	Hazard class:	n/a
Input voltage:	110-240V	Our item no:	DAR01448
Brand:	Sunlu

Order now, we can ship this today!

£105.00

£87.50 Excl. 20% VAT

In stock

SUNLU Filament Connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different color. This way you can create personalized 3D prints with unique colorful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Sunlu	Our item no:	DAR01819

Order now, we can ship this today!

£39.95

£33.29 Excl. 20% VAT

In stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Popular products

Nylon

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Newsletter

Popular products

Nylon