Bambu Lab P1P Filament printers Printing technique 3D printers 123-3D flexible PET & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 01270 433 123
E: info@123-3D.co.uk
Free delivery over £10

Lots of popular payment options!

Official Prusa dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: £0.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

Nozzle set (5-pack)

Nozzle set (5-pack)

£34.00

Bambu Lab AMS - Automatic Material System

Bambu Lab AMS - Automatic Material System DAR01228

Description Open a world of new, creative possibilities with Bambu Lab AMS. This makes it possible to print with different colors and materials. This allows you to easily print supports from fragile or soluble material, so you have to spend less time on post-processing.

Intelligent system
The AMS uses an intelligent system including a 32-bit MCU and a smart algorithm. It detects when the filament runs out and has a filament backup system. This system ensures a smooth transition to a new spool, allowing the 3D printer to continue printing undisturbed. This way you can print much easier and more efficiently and no unused filament remains on the spool.

The AMS also detects whether the filament has become tangled. At that point it will stop printing so you can solve the problem. By using Bambu Lab filaments, the AMS can identify which rolls of filament you have added. For filaments that are not from Bambu Lab, it is necessary to manually enter which filaments they are in Bambu Studio.

Always dry
filament The housing is airtight and absorbs moisture by means of a desiccant. A humidity sensor monitors the humidity in the AMS and gives you a signal when it is too high or when the desiccant needs to be replaced. This keeps your filament dry and always in optimal condition for good prints.

Up to 16 colours
If you want to print with more than 4 different materials or colors, you can do this by connecting multiple AMS. By using an AMS hub, you can print up to 16 colors and different filaments at the same time. Please note: you do not receive this hub as standard.

Specifications

Dimensions:	368 x 283 x 224 mm	Weight:	2.5 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Bambu Lab	Our item no:	DAR01228

£340.00 (sold out)

£283.33 Excl. 20% VAT

123-3D flexible PET & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers

123-3D flexible PET & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers DAR01381

2
1
0

Description

Specifications

Dimensions:	256 x 256 mm	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR01381

£24.50

£20.42 Excl. 20% VAT

14 day delivery

123-3D flexible PEO & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers

123-3D flexible PEO & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers DAR01380

2
1
0

Description

Specifications

Dimensions:	256 x 256 mm	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR01380

£24.50

£20.42 Excl. 20% VAT

14 day delivery

123-3D flexible PEY & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers

123-3D flexible PEY & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers DAR01382

2
1
0

Description

Specifications

Dimensions:	256 x 256 mm	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR01382

Order now, we can ship this tomorrow!

£24.50

£20.42 Excl. 20% VAT

In stock

Bambu Lab Extruder Filament Sensor for P1 Series

Bambu Lab Extruder Filament Sensor for P1 Series DAR01457

Description This Bambu Lab Extruder Filament Sensor is an original replacement product from Bambu Lab. This sensor is part of the extruder and registers the presence of filament. This sensor also detects the filament cutting lever. This sensor is only suitable for the P1 series from Bambu Lab.

Specifications

Brand:	Bambu Lab	Our item no:	DAR01457
Hazard class:	n/a

£13.73

£11.44 Excl. 20% VAT

14 day delivery

Bambu Lab Double Sided Smooth PEI Sheet

Bambu Lab Double Sided Smooth PEI Sheet DAR01638

Description This Bambu Lab double-sided smooth PEI sheet has an improved precision on the z-axis, allowing you to print more accurately and consistently. This makes this sheet an ideal choice for producing parts that require high precision. The texture of the sheet gives your 3D prints a smooth and matte texture. Thanks to the PEI coating, it is possible to print with many different materials, such as PLA, TPU, PETG, ABS and nylon. The sheet is made of spring steel for improved magnetic adhesion. This ensures excellent print quality.

Specifications

Dimensions:	256 x 256 mm	Hazard class:	n/a
Brand:	Bambu Lab	Our item no:	DAR01638

Order now, we can ship this tomorrow!

£36.20

£30.17 Excl. 20% VAT

In stock

BigTreeTech Panda Touch V1.0

BigTreeTech Panda Touch V1.0 DAR01614

3
2
1
0

Description The Panda Touch V1.0 is a 5 inch touchscreen from Bigtreetech that can be used as an alternative or replacement for the current screen of the Bambu P1P and the Bambu P1S. It is even possible to control up to 10 Bambu Lab printers with the Panda Touch V1.0. This screen is compatible with the Bambu Lab X1, P1 and A1 series.

Easy installation & use
The Panda Touch is easy and hassle-free to install, so you can get started right away. The user-friendly UI and useful features make this an ideal screen. Connects easily to 2.4G WiFi and charges effortlessly thanks to the built-in battery that allows you to charge magnetically. The Panda Touch comes with a magnetic USB dock, specially made for the P1 series 3D printers from Bambu Lab. With just one click you can access and control your AMS. This allows you to easily see the colors and filament types now loaded into your AMS. It is also possible to set the type or color manually, just like on the X1C interface. You can print from the printer memory card or via a USB stick.

Specifications

Brand:	BigTreeTech	Our item no:	DAR01614
Hazard class:	n/a

£86.50 (sold out)

£72.08 Excl. 20% VAT

BigTreeTech Panda Revo P1 Hotend

BigTreeTech Panda Revo P1 Hotend DAR01615

2
1
0

Description This Panda Revo P1 hotend can be replaced in just 30 seconds without tools, so you can quickly continue making your next 3D print. The 0.4 mm Revo High Flow nozzle and the 60 W HeaterCore ensure a flow rate of up to 40 mm³/s. Easily print at high temperatures of up to 300 °C. This allows you to print with many different types of filament, including PLA, PETG, ABS, TPU, HIPS and Nylon. The Panda Revo is suitable for the Bambu Lab P1P and P1S. In addition, it is compatible with the RapidChange Revo Standard, ObXidian and High Flow nozzles.

Please note: this hotend is NOT compatible with the Revo belt nozzle.

Specifications

Brand:	BigTreeTech	Our item no:	DAR01615
Hazard class:	n/a

£138.00

£115.00 Excl. 20% VAT

14 day delivery

BigTreeTech Panda Lux LED Upgrade Kit for Bamboo Lab X1/P1 Series

BigTreeTech Panda Lux LED Upgrade Kit for Bamboo Lab X1/P1 Series DAR01710

1
0

Description Light up your print surface with this Panda Lux LED Upgrade from Bigtreetech. The 31 high-quality LED lights illuminate the print surface so you have a better view during 3D printing. The lights have a color temperature of 6000 K (cool white) and a lifespan of up to 36,000 hours. Thanks to the magnetic mounting system, you can easily attach this LED bar to the printer. The bar is powered via the connector of the original light bar and can be controlled via the original screen. A high-quality aluminum alloy housing ensures that this LED bar has a long life. This LED upgrade has a size of 273 x 23 x 10.8 mm and is suitable for the P1 and X1 series 3D printers from Bambu Lab.

The box contains:

Panda Lux
100mm connection cable
Adapter board
Electrical tape
Double sided tape 4x

Specifications

Dimensions:	273 x 23 x 10.8 mm	Brand:	BIQU
Cable length:	10 cm	Hazard class:	n/a
Voltage:	5 v	Our item no:	DAR01710

Order now, we can ship this tomorrow!

£7.91

£6.59 Excl. 20% VAT

In stock

BigTreeTech Panda Branch

BigTreeTech Panda Branch DAR01859

1
0

Description Expand your possibilities with the BIQU Bigtreetech Panda Branch. You can easily connect it to the AMS of your Bambu Lab X1/P1/A1 3D printer. This way you are protected against reverse connection and overcurrent. The red indicator light turns on immediately when detecting overcurrent, so you can quickly solve this. The handy design is easy to install. You can also 3D print a protective cover. You can use the DIP switch to switch between 1 A, 2 A and 2.7 A for 5 V outputs, so you can protect your devices well against too high current. The Panda Branch has 4 type A USB ports with a 5 V output that you can use for fans, for example. The MX3.0 2x2 pin interface can be used to connect the AMS. Connect the AMS to 1 of these ports, the other ports are redundant and only designed for AMS connection. You cannot use these ports to supply power to other devices.

Specifications

Input voltage:	24V	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01859

Order now, we can ship this tomorrow!

£22.05

£18.38 Excl. 20% VAT

In stock

BIQU Honeycomb and Houndstooth Designer Build plate for Bambu Lab printers

BIQU Honeycomb and Houndstooth Designer Build plate for Bambu Lab printers DAR01857

2
1
0

Description Add a special effect to your 3D prints with this BIQU designer build plate for Bambu Lab X1/P1/A1 3D printers. This flexible plate is made of spring steel and has a special polymer coating for improved adhesion during printing. After printing, you can easily remove your 3D print by bending the plate. The plate is printed on both sides with a honeycomb pattern on one side and a pied-de-poule pattern on the other. This way you can choose the perfect pattern for your project.

Specifications

Dimensions:	257 x 257 mm	Hazard class:	n/a
Brand:	BIQU	Our item no:	DAR01857

£19.00

£15.83 Excl. 20% VAT

14 day delivery

BIQU CryoGrip Build plate for Bambu Lab

BIQU CryoGrip Build plate for Bambu Lab DAR01860

2
1
0

Description This BIQU CryoGrip buildplate for Bambu Lab uses a revolutionary 7-layer design. This allows you to print at room temperature with excellent first layer adhesion. This makes it easy to achieve fantastic results without warping.

7 layer design
The 7 layers of this plate work together to deliver excellent performance. The middle layer is made of ferromagnetic spring steel to prevent warping of your prints. Also, the edges of the plate will not lift when making large 3D prints. On both sides of this plate is a layer that ensures improved adhesion between the spring steel and the top coat. This is followed by an impact and corrosion resistant layer on both sides. Finally, both the top and bottom of the plate have a special coating for extra strong adhesion.

Other functionalities
This plate is specifically designed to print PLA at room temperature, preventing the extruder from overheating and preventing clogging. With only 50W consumption, this plate is a more sustainable choice than standard heated printing plates. To restore the plate's adhesion, simply wipe it with water. Your 3D prints can be easily removed by slightly bending the plate. The plate is 257 x 257 mm and is suitable for Bambu Lab's X1/P1/A1 3D printers.

Please note: Frostbite is not suitable for ABS & TPU.

Specifications

Dimensions:	257 x 257 mm	Hazard class:	n/a
Brand:	BIQU	Our item no:	DAR01860

£27.90 (sold out)

£23.25 Excl. 20% VAT

Modefine 3D High temp gold PEI build plate for X1, P1, A1 series

Modefine 3D High temp gold PEI build plate for X1, P1, A1 series DAR01641

Description This gold PEI building board is textured on both sides for better first layer adhesion. This means that 3D prints stay in place better during printing and you do not have to use adhesives for all materials. When the plate has cooled, prints can be easily removed. You can also bend the plate slightly to release the model. The building board can be used for different filaments such as PLA, TPU and PC, or for materials that require a high temperature such as ABS and Nylon. This printed circuit board is suitable for the X1, P1 and A1 series of Bambu Lab.

Specifications

Dimensions:	256 x 256 x 0.575 mm	Hazard class:	n/a
Brand:	Modefine 3D	Our item no:	DAR01641
Weight:	0.276 kg

Order now, we can ship this tomorrow!

£19.80

£16.50 Excl. 20% VAT

In stock

Modefine 3D Low Temp PEI build plate for X1/P1/A1 series

Modefine 3D Low Temp PEI build plate for X1/P1/A1 series DAR01913

Description Create amazing 3D prints with this low temprature PEI build plate from Modefine 3D. Your prints will have excellent adhesion during printing and can be easily removed afterwards. You can use both sides of this build plate and the bottom of your 3D prints will have a smooth surface. This PEI plate works best with filaments that have a low glass transition temperature. Please note: using a glue stick is recommended, otherwise the surface can easily be damaged. In addition, this plate is not suitable for filaments that need to be printed at high temperatures.

Specifications

Dimensions:	256 x 256 x 0.9 mm	Hazard class:	n/a
Brand:	Modefine 3D	Our item no:	DAR01913

£28.00 (sold out)

£23.33 Excl. 20% VAT

Modefine 3D High temp black PEI build plate for X1, P1, A1 series

Modefine 3D High temp black PEI build plate for X1, P1, A1 series DAR01643

Description With this black, textured PEI building board you are assured of good first layer adhesion. This ensures that your 3D prints remain in place during printing and an adhesive does not always have to be used. Prints can be easily removed after the plate has cooled. The build plate can be used with PLA, TPU and PETG, or with materials such as ABS and Nylon, which require a higher temperature. This printed circuit board is suitable for the X1, P1 and A1 series of Bambu Lab.

Specifications

Dimensions:	256 x 256 x 0.575 mm	Hazard class:	n/a
Brand:	Modefine 3D	Our item no:	DAR01643
Weight:	0.28 kg

£19.95

£16.63 Excl. 20% VAT

14 day delivery

Modefine 3D M2 hotend for P1series (ceramic heater+Thermistor)

Modefine 3D M2 hotend for P1series (ceramic heater+Thermistor) DAR01647

Description This all-metal M2 hotend contains a ceramic heater and thermistor. It has an improved nozzle structure, where the heating block and nozzle are connected with a screw thread. This means there is less chance of material leaking during printing. The nozzle is made of SKD11 hardened steel, which means this hotend can handle a temperature of up to 320 ˚C. Because the radiator and the heating block are connected by two screws, there is less chance of problems during 3D printing at high speed. Finally, there is better heat conduction thanks to the use of a nickel-plated chromium zirconium and copper alloy. This hotend is suitable for the P1 series 3D printers from Bambu Lab.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR01647
Brand:	Modefine 3D	Printer extruder max temp:	320 °C
Weight:	0.036 kg

Order now, we can ship this tomorrow!

£16.50

£13.75 Excl. 20% VAT

In stock

Modefine 3D Hardening Nozzle 0.2mm

Modefine 3D Hardening Nozzle 0.2mm DAR01651

Description This 0.2mm hardened steel nozzle is wear resistant and can therefore be used with materials that contain extra particles, such as carbon. Easily print with temperatures up to 400 ˚C with this nozzle. The design has copper on the inside and three holes for a high flow rate and increased print speed.

Compatible with the following hotends:

Specifications

Max temp:	400 °C	Brand:	Modefine 3D
Material:	Hardened Steel	Weight:	0.03 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.2 mm	Our item no:	DAR01651

Nozzle diameter:

Order now, we can ship this tomorrow!

£4.95

£4.13 Excl. 20% VAT

In stock

Modefine 3D Hardening Nozzle 0.4mm

Modefine 3D Hardening Nozzle 0.4mm DAR01652

Description This 0.4 mm hardened steel nozzle is wear-resistant and can therefore be used with materials that contain extra particles, such as carbon. Easily print at temperatures up to 400 ˚C with this nozzle. The design has copper on the inside and three holes for a high flow rate and increased printing speed.

Specifications

Max temp:	400 °C	Brand:	Modefine 3D
Material:	Hardened Steel	Weight:	0.03 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR01652

Nozzle diameter:

£4.95 (sold out)

£4.13 Excl. 20% VAT

Modefine 3D Hardening Nozzle 0.6mm

Modefine 3D Hardening Nozzle 0.6mm DAR01653

Description This 0.6 mm hardened steel nozzle is wear-resistant and can therefore be used with materials that contain extra particles, such as carbon. Easily print at temperatures up to 400 ˚C with this nozzle. The design has copper on the inside and three holes for a high flow rate and increased printing speed.

Specifications

Max temp:	400 °C	Brand:	Modefine 3D
Material:	Hardened Steel	Weight:	0.03 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.6 mm	Our item no:	DAR01653

Nozzle diameter:

£4.95 (sold out)

£4.13 Excl. 20% VAT

Modefine 3D Hardening Nozzle 0.8mm

Modefine 3D Hardening Nozzle 0.8mm DAR01654

Description This 0.8 mm hardened steel nozzle is wear-resistant and can therefore be used with materials that contain extra particles, such as carbon. Easily print at temperatures up to 400 ˚C with this nozzle. The design has copper on the inside and three holes for a high flow rate and increased printing speed.

Specifications

Max temp:	400 °C	Brand:	Modefine 3D
Material:	Hardened Steel	Weight:	0.03 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DAR01654

Nozzle diameter:

Order now, we can ship this tomorrow!

£4.95

£4.13 Excl. 20% VAT

In stock

E3D Bambu Lab Metal Only High Flow ObXidian 0.40mm

E3D Bambu Lab Metal Only High Flow ObXidian 0.40mm DAR01774

Description The ObXidian high flow hotend is specially designed for the X1 and P1 series from Bambu Lab. Thanks to this hotend, these fast 3D printers can print even more efficiently. The nozzle increases the flow rate of the hotend by 60%, which ensures more consistent extrusion at high speeds. With this wear-resistant ObXidian hotend you can expect reliable and consistent extrusion. The coating in the heated parts and the nozzle provides protection against damage to filaments that are reinforced with fibers. The nozzle also has a non-stick protective layer to prevent plastic accumulation. This hotend has a 0.4 mm nozzle and is suitable for the X1, X1 Carbon, PS1 and P1P 3D printers from Bambu Lab.

E3D is an official partner of Bambu Lab. This means that the parts made by E3D fit seamlessly with your Bambu Lab 3D printer and that you can combine them with confidence. This product only contains the metal parts:

1 x Bambu Lab High Flow ObXidian Hotend 0.40mm
1 x Thermal paste
1 x Bambu Lab sock
1 x Bambu Lab mounting clip
2 x Bambu Lab bolts

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR01774
Brand:	E3D

Nozzle diameter:

£68.00

£56.67 Excl. 20% VAT

14 day delivery

E3D Bambu Lab Metal Only High Flow ObXidian 0.60mm

E3D Bambu Lab Metal Only High Flow ObXidian 0.60mm DAR01775

1
0

Description The ObXidian high flow hotend is specially designed for the X1 and P1 series from Bambu Lab. Thanks to this hotend, these fast 3D printers can print even more efficiently. The nozzle increases the flow rate of the hotend by 60%, which ensures more consistent extrusion at high speeds. With this wear-resistant ObXidian hotend you can expect reliable and consistent extrusion. The coating in the heated parts and the nozzle provides protection against damage of filaments that are reinforced with fibers. The nozzle also has a non-stick protective layer to prevent plastic accumulation. This hotend has a 0.6 mm nozzle and is suitable for the X1, X1 Carbon, PS1 and P1P 3D printers from Bambu Lab.

E3D is an official partner of Bambu Lab. This means that the parts made by E3D fit seamlessly with your Bambu Lab 3D printer and that you can combine them with confidence. This product only contains the metal parts:

1 x Bambu Lab High Flow ObXidian Hotend 0.60mm
1 x Thermal paste
1 x Bambu Lab Sock
1 x Bambu Lab mounting clip
2 x Bambu Lab bolts

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.6 mm	Our item no:	DAR01775
Brand:	E3D

Nozzle diameter:

£65.00

£54.17 Excl. 20% VAT

14 day delivery

E3D Bambu Lab P1 High Flow ObXidian Kit, 0.40mm

E3D Bambu Lab P1 High Flow ObXidian Kit, 0.40mm DAR01776

Description The ObXidian high flow hotend is specially designed for Bambu Lab's P1 series. This hotend allows these fast 3D printers to print even more efficiently. The nozzle increases the flow rate of the hotend by 60%, which ensures more consistent extrusion at high speeds. With this wear-resistant ObXidian hotend you can count on reliable and consistent extrusion. The coating in the heated parts and the nozzle provides protection against damage to fiber-reinforced filaments. The nozzle also has a non-stick protective layer to prevent plastic accumulation. This hotend contains a 0.4 mm nozzle and is suitable for Bambu Lab's PS1 and P1P 3D printers.

E3D is an official partner of Bambu Lab. This means that the parts made by E3D fit seamlessly with your Bambu Lab 3D printer and that you can combine them with confidence. This product contains:

1 x Assembled Bambu Lab High Flow ObXidian Hotend 0.40mm
2 x Bambu Lab bolts
1 x Thermistor
1 x Fan

Please note: This product is not compatible with the X1E 3D printer

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR01776
Brand:	E3D

Nozzle diameter:

£102.00

£85.00 Excl. 20% VAT

14 day delivery

E3D Bambu Lab P1 High Flow ObXidian Kit, 0.60mm

E3D Bambu Lab P1 High Flow ObXidian Kit, 0.60mm DAR01777

Description The ObXidian high flow hotend is specially designed for Bambu Lab's P1 series. This hotend allows these fast 3D printers to print even more efficiently. The nozzle increases the flow rate of the hotend by 60%, which ensures more consistent extrusion at high speeds. With this wear-resistant ObXidian hotend you can count on reliable and consistent extrusion. The coating in the heated parts and the nozzle provides protection against damage to fiber-reinforced filaments. The nozzle also has a non-stick protective layer to prevent plastic accumulation. This hotend contains a 0.6 mm nozzle and is suitable for Bambu Lab's PS1 and P1P 3D printers.

E3D is an official partner of Bambu Lab. This means that the parts made by E3D fit seamlessly with your Bambu Lab 3D printer and that you can combine them with confidence.

This product contains:

1 x Assembled Bambu Lab High Flow ObXidian Hotend 0.60mm
2 x Bambu Lab bolts
1 x Thermistor
1 x Fan

Please note: This product is not compatible with the X1E 3D printer

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.6 mm	Our item no:	DAR01777
Brand:	E3D

Nozzle diameter:

£102.00

£85.00 Excl. 20% VAT

14 day delivery

Capricorn Bambu Lab AMS Upgrade Kit

Capricorn Bambu Lab AMS Upgrade Kit DAR01891

Description The Capricorn AMS kit from Bambu Lab contains 4 meters of TL-Series PTFE tubing, allowing you to upgrade your current PTFE tubing. These tubes protect your filament from dust and humidity, allowing you to always produce perfect prints. The kit contains everything you need to replace your tubes.

Specifications

Material:	PTFE	Inner diameter:	2 mm
Filament diameter:	1.75 mm	Outer diameter:	4 mm
Colour:	Blue	Hazard class:	n/a
Length:	4 m	Our item no:	DAR01891
Brand:	Capricorn

Order now, we can ship this tomorrow!

£24.97

£20.81 Excl. 20% VAT

In stock

BIQU CryoGrip Pro Glacier Buildplate - 257 x 257 mm - X1 / P1 / A1

BIQU CryoGrip Pro Glacier Buildplate - 257 x 257 mm - X1 / P1 / A1 DAR02084

Description This BIQU CryoGrip Pro Glacier buildplate for Bambu Lab uses a revolutionary 7-layer design. This allows you to print at room temperature with excellent first layer adhesion. This makes it easy to achieve fantastic results without warping.

7 layer design
The 7 layers of this plate work together to deliver excellent performance. The middle layer is made of ferromagnetic spring steel to prevent warping of your prints. Also, the edges of the plate will not lift when making large 3D prints. On both sides of this plate is a layer that ensures improved adhesion between the spring steel and the top coat. This is followed by an impact and corrosion resistant layer on both sides. Finally, both the top and bottom of the plate have a special coating for extra strong adhesion.

Other functionalities
This plate is specially designed to print various filaments including ABS, TPU and PA at room temperature, preventing the extruder from overheating and clogging. It has a fine texture and good filament adhesion. With only 50W consumption, this plate is a more sustainable choice than standard heated printing plates. To restore the adhesion of the plate, you can simply wipe it with water. Your 3D prints can be easily removed by slightly bending the plate. The plate is 257 x 257 mm and is suitable for the X1/P1/A1 3D printer from Bambu Lab.

Please note: The Glacier buildplate can be used for PLA and PETG, but excels with other materials. If you plan on printing with PLA and/or PETG only, the Frostbite buildplate is also an excellent choice. It has a rougher texture and offers fantastic adhesion to PLA and PETG.

Specifications

Dimensions:	257 x 257 mm	Hazard class:	n/a
Brand:	BIQU	Our item no:	DAR02084

Order now, we can ship this tomorrow!

£29.95

£24.96 Excl. 20% VAT

In stock

Bambu Lab Makers Supply Triple-axis Tourbillon Model Components Kit 007

Bambu Lab Makers Supply Triple-axis Tourbillon Model Components Kit 007 DAR02097

2
1
0

Description This hardware kit contains everything you need to make a triple axis tourbillon model. To make the complete model, you also need to download and print the model parts. The kit contains:

3x M2x6 FHCS (Machine Screw)
24x M2x8 FHCS (Machine Screw)
11x M2x10 FHCS (Machine Screw)
2x M2x12 FHCS (Machine Screw)
1x M2x14 FHCS (Machine Screw)
8x M2.5x6 BHCS (Machine Screw)
2x M3x23 SHCS (Machine Screw)
6x MR52 Steel Deep Groove Ball Bearing
1x 6704 Steel Deep Groove Ball Bearing
1x F8-14M Miniature Plane Thrust Ball Bearing
6x MR128 Steel Deep Groove Ball Bearings
16x 6mm Stainless Steel Ball
1x 2*13mm Brass Dowel Pin
1x 2*22mm Brass Dowel Pin
1x 2*32mm Brass Dowel Pin
1x TT Motor (DC5V 59RPM CCW Single Axis)

Please note: this kit only contains the mechanical parts. The other parts need to be 3D printed by yourself. Also always use a USB power supply with the correct voltage.

Tip: Check the mechanism before connecting it to the power. This can easily be done by turning the handle. Always make sure that the motor is not blocked.

Specifications

Voltage:	5 v	Hazard class:	n/a
Brand:	Bambu Lab	Our item no:	DAR02097
Weight:	0.079 kg

£36.00

£30.00 Excl. 20% VAT

14 day delivery

Bambu Lab Makers Supply Jet Engine Kit Collection

Bambu Lab Makers Supply Jet Engine Kit Collection DAR02098

3
2
1
0

Description This hardware kit contains everything you need to make an engine model. To make the complete model, you also need to download and print the parts of the model. This kit contains:

80x M2.5x10 SHCS (Machine Screw)
80x M2.5 Stainless Steel Hex Nut
150x M2.5x5x0.5 Stainless Steel Flat Washer
2x 6204 Plastic Deep Groove Ball Bearing
2x 6003 Plastic Deep Groove Ball Bearing

Specifications

Brand:	Bambu Lab	Our item no:	DAR02098
Hazard class:	n/a

£24.95

£20.79 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ CM2™ - Hardend Tip - Standard Flow - Hotend for Bambu Lab P1P/P1S

Micro Swiss FlowTech™ CM2™ - Hardend Tip - Standard Flow - Hotend for Bambu Lab P1P/P1S DAR02209

Description This Microswiss FlowTech CM2 hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. Thanks to the sealed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains:

1x FlowTech™ Heater Core for Bambu Lab (P1-series)
1x Heatsink for Bambu Lab
1x FlowTech 0.4mm Nozzle (CM2™)
2x Titanium hotend mounting screws
1x Silicon Sock
2x Fan mounting shoulder screws
1x Printed Nozzle Changing Tool

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR02209
Brand:	Micro Swiss

£82.89

£69.08 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ CM2™ CHT - Hardened Tip - High Flow - Hotend for Bambu Lab P1P/P1S

Micro Swiss FlowTech™ CM2™ CHT - Hardened Tip - High Flow - Hotend for Bambu Lab P1P/P1S DAR02210

Description This Microswiss FlowTech CM2 CHT hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. In combination with the Bondtech CHT High Flow Nozzles, the print speed can even reach 50 mm/s. Thanks to the closed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains:

1x FlowTech™ Heater Core for Bambu Lab (P1-series)
1x Heatsink for Bambu Lab
1x FlowTech 0.4mm Nozzle (CM2™, CHT, CM2™ CHT, DiamondBack)
2x Titanium hotend mounting screws
1x Silicon Sock
2x Fan mounting shoulder screws
1x Printed Nozzle Changing Tool

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR02210
Brand:	Micro Swiss

£91.52

£76.27 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ Brass Plated CHT - High Flow - Hotend for Bambu Lab P1P/P1S

Micro Swiss FlowTech™ Brass Plated CHT - High Flow - Hotend for Bambu Lab P1P/P1S DAR02211

Description This Microswiss FlowTech Brass Plated CHT hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. In combination with the Bondtech FlowTech™ - Brass Plated Nozzle, the flow rate can even increase to 50 mm/s. Thanks to the closed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains:

1x FlowTech™ Heater Core for Bambu Lab (P1-series)
1x Heatsink for Bambu Lab
1x FlowTech™ - 0.4mm Brass Plated Nozzle
2x Titanium hotend mounting screws
1x Silicon Sock
2x Fan mounting shoulder screws
1x Printed Nozzle Changing Tool

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR02211
Brand:	Micro Swiss

£87.21

£72.68 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ DiamondBack - Diamond Tip - Standard Flow - Hotend for Bambu Lab P1P/P1S

Micro Swiss FlowTech™ DiamondBack - Diamond Tip - Standard Flow - Hotend for Bambu Lab P1P/P1S DAR02212

Description This Microswiss FlowTech DiamondBack hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. Thanks to the sealed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains:

1x FlowTech™ Heater Core for Bambu Lab (P1-series)
1x Heatsink for Bambu Lab
1x FlowTech 0.4mm Nozzle (CM2™, CHT, CM2™ CHT, DiamondBack)
2x Titanium hotend mounting screws
1x Silicon Sock
2x Fan mounting shoulder screws
1x Printed Nozzle Changing Tool

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR02212
Brand:	Micro Swiss

£174.45

£145.38 Excl. 20% VAT

14 day delivery

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007
Brand:	Modifi3D

Extra information

Instructional video

Order now, we can ship this tomorrow!

£29.95

£24.96 Excl. 20% VAT

In stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	30 W	Brand:	Modifi3D
Max operating temp:	450 °C	Weight:	0.12 kg
Voltage:	24 v	Hazard class:	n/a
Cable length:	150 cm	Our item no:	DGS00090

Order now, we can ship this tomorrow!

£65.50

£54.58 Excl. 20% VAT

In stock

3D Printer starter/finishing/maintenance kit

3D Printer starter/finishing/maintenance kit DGS00122

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:	123-3D	Our item no:	DGS00122
Hazard class:	n/a

£94.50 (sold out)

£78.75 Excl. 20% VAT

Steelmans 3dB noise reduction feet pads

Steelmans 3dB noise reduction feet pads DAR00265

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Quantity:	4 Quantity	Hazard class:	n/a
Brand:	Steelmans3D	Our item no:	DAR00265
Video promo:	Promotional video

Order now, we can ship this tomorrow!

£14.50

£12.08 Excl. 20% VAT

In stock

Calex Smart mini indoor camera (1080p)

Calex Smart mini indoor camera (1080p) LCA00572

Description With this compact smart camera from Calex you can keep an eye on everything. The images that the mini camera makes can be viewed via an app on your phone or tablet. This way you will never have the feeling that your home is unprotected. The camera detects movement and then immediately sends a message to your phone, so that nothing escapes you. The camera continues to film even in the dark.

You can change various settings and view the camera images via the app. Thanks to the integrated microphone, you can communicate with each other. The app is suitable for both Android and Apple. In addition, the mini camera can be linked to other smart products from Calex.

Specifications

Dimensions:	53 x 32 x 110 mm	Hazard class:	n/a
Colour:	White	WiFi:	2.4 GHz
Brand:	Calex	Our item no:	LCA00572

£34.95

£29.13 Excl. 20% VAT

14 day delivery

© 2025 - 123-3d.co.uk