View all flexible filaments Flexible Filament View by property 3D filament 123-3D blue flexible TPE filament 1.75mm, 0.5kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D blue flexible TPE filament 1.75mm, 0.5kg

Description The blue 123-3D filament (1.75mm) is a flexible TPE filament, which has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	TPE	RAL colour no:	5002
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-95 °C	Outer diameter:	Ø 20.0 cm
Colour:	blue	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	220-260 °C	Spool width:	5.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	45D	Our item no:	DFF08004
Length:	180 m

Order now, we can ship this on Monday!

£25.08 (Incl. 20% VAT)
(£20.90 Excl. 20% VAT)

in stock

123-3D red flexible TPE filament 1.75mm, 0.5kg

Zoom in

Description The red 123-3D filament (1.75mm) is a flexible TPE filament, which has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	TPE	RAL colour no:	3020
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-95 °C	Outer diameter:	Ø 20.0 cm
Colour:	red	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	220-260 °C	Spool width:	5.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	45D	Our item no:	DFF08003
Length:	180 m

Order now, we can ship this on Monday!

£24.23 (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

in stock

123-3D transparent flexible TPE filament 1.75mm, 0.5kg

Zoom in

Description The transparent TPE filament from 123-3d.co.uk has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Tunnel code:	n/a	Length:	180 m
Material:	TPE	Brand:	123-3D
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-95 °C	Outer diameter:	Ø 20.0 cm
Colour:	neutral	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	220-260 °C	Spool width:	5.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	45D	Our item no:	DFF08000

Order now, we can ship this on Monday!

£22.80 (Incl. 20% VAT)
(£19.00 Excl. 20% VAT)

in stock

123-3D white flexible TPE filament 1.75mm, 0.5kg

Zoom in

Description This white 123-3D own brand filament (1.75mm) is a flexible TPE filament, which has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	TPE	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-95 °C	Outer diameter:	Ø 20.0 cm
Colour:	white	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	220-260 °C	Spool width:	5.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	45D	Our item no:	DFF08002
Length:	180 m

£25.08 (sold out) (Incl. 20% VAT)
(£20.90 Excl. 20% VAT)

123-3D black flexible TPE filament 1.75mm, 0.5kg

Zoom in

Description The black TPE filament from 123-3d.co.uk has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	TPE	RAL colour no:	9017
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-95 °C	Outer diameter:	Ø 20.0 cm
Colour:	black	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	220-260 °C	Spool width:	5.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	45D	Our item no:	DFF08001
Length:	180 m

This product can be ordered 1 time(s).

£24.23 (sold out) (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

REAL blue TPU 98A filament 1.75mm, 0.5kg

Zoom in

2
1
0

Description This blue 98A TPU filament with a diameter of 1.75 mm is ideal for printing flexible parts such as smartphone cases or anti-slip objects.

The filament has an optimal printing temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30 to 40 mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.

Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament slightly more difficult to process. To prevent the filament from getting stuck or being pushed in the wrong direction during printing, the extruder must support the material as much as possible. Read more about the use of flexible TPU and TPE filament here .

TIP: prevent holes in your 3D print by storing the filament in an airtight place in a dry place.

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	TPU 98A	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0-60 °C	Spool width:	5.5 cm
Colour:	blue	Hazard class:	n/a
Nozzle temp range:	225-245 °C	Our item no:	DFP02325
Amount:	0.5 kg	Replaces item no:	DFF03014
Brand:	REAL

Order now, we can ship this on Monday!

£33.11 (Incl. 20% VAT)
(£27.59 Excl. 20% VAT)

in stock

REAL filament neutral 1.75 mm PVA 0.5 kg

Zoom in

2
1
0

Description This Real PVA (PolyVinylAlcohol) filament is a (warm) water soluble filament that is ideal to use as a support when printing objects with PLA or ABS. This allows you to print objects that would otherwise not be possible. Because the PVA filament reacts very quickly with water, it is very important to store the spool at room temperature under the dryest possible conditions after opening. The heated bed can be set to the same temperature as for ABS or PLA.

The maximum printing temperature is 210°C

Read more about printing with PVA filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PVA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0-50 °C	Spool width:	7.0 cm
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFP02384
Amount:	0.5 kg	Replaces item no:	DFV02000
Brand:	REAL

Order now, we can ship this on Monday!

£33.96 (Incl. 20% VAT)
(£28.30 Excl. 20% VAT)

in stock

REAL neutral PVA Plus filament 1.75mm, 0.5kg

Zoom in

Description This neutral PVA Plus is the ideal support filament (1.75mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PLA Plus is ideal in combination with PETG and has a maximum print temperature of 225°C.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PVA Plus	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	neutral	Spool width:	4.5 cm
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFV02002
Length:	170 m

Order now, we can ship this on Monday!

£40.76 (Incl. 20% VAT)
(£33.97 Excl. 20% VAT)

in stock

REAL neutral PVA Pro filament 1.75mm, 0.5kg

Zoom in

Description The neutral PVA Pro is the ideal support filament (1.75mm) for ABS. This material is suitable for printing at temperatures up to 250°C. PVA Pro adheres perfectly to ABS, ASA and TPU98A. The material dissolves slowly, but completely, in lukewarm, running water. This makes it possible to create cavities and floating parts in your ABS 3D prints.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PVA Pro	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	neutral	Spool width:	4.5 cm
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFV02004
Length:	170 m

Order now, we can ship this on Monday!

£40.76 (Incl. 20% VAT)
(£33.97 Excl. 20% VAT)

in stock

REAL neutral TPU 98A filament 1.75 mm 0.5 kg

Zoom in

2
1
0

Description This neutral (milky/white) 98A TPU filament with a diameter of 1.75 mm is ideal for printing flexible parts such as smartphone covers or anti-slip objects.

The filament has an optimal printing temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30 to 40 mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.

Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament slightly more difficult to process. To prevent the filament from getting stuck or being pushed in the wrong direction during printing, the extruder must support the material as much as possible. Read more about the use of flexible TPU and TPE filament here .

TIP: prevent holes in your 3D print by storing the filament in an airtight place in a dry place.

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	TPU 98A	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0-60 °C	Spool width:	5.5 cm
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	225-245 °C	Our item no:	DFP02324
Amount:	0.5 kg	Replaces item no:	DFF03018
Brand:	REAL

Order now, we can ship this on Monday!

£33.11 (Incl. 20% VAT)
(£27.59 Excl. 20% VAT)

in stock

REAL red TPU 98A filament 1.75mm, 0.5kg

Zoom in

Description With this strong and flexible red TPU filament (1.75mm), high-speed 3D printing becomes easy!

This material delivers professional results with objects that are flexible and heat resistant. TPU 98A is suitable for both direct and Bowden style 3D printers. A heated bed is not necessary.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	TPU	RAL colour no:	3020
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	red	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	225-245 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	98A	Our item no:	DFF03022
Length:	200 m

Order now, we can ship this on Monday!

£33.11 (Incl. 20% VAT)
(£27.59 Excl. 20% VAT)

in stock

REAL white TPU 98A filament 1.75mm, 0.5kg

Zoom in

Description With this strong and flexible white TPU filament (1.75mm), high-speed 3D printing becomes easy!

This material delivers professional results with objects that are flexible and heat resistant. TPU 98A is suitable for both direct and Bowden style 3D printers. A heated bed is not necessary.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	TPU	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	white	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	225-245 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	98A	Our item no:	DFF03026
Length:	200 m

Order now, we can ship this on Monday!

£33.11 (Incl. 20% VAT)
(£27.59 Excl. 20% VAT)

in stock

REAL black TPU 98A filament 1.75mm, 0.5kg

Zoom in

Description The black TPU 98A (1.75mm) is a strong and flexible filament that makes high-speed 3D printing easy. This material delivers professional results, with objects that are flexible and heat resistant. TPU 98A is suitable for both Direct and Bowden style 3D printers. A heated bed is not necessary.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	TPU	RAL colour no:	9017
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	black	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	225-245 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	98A	Our item no:	DFF03010
Length:	200 m

This product can be ordered 1 time(s).

£33.11 (sold out) (Incl. 20% VAT)
(£27.59 Excl. 20% VAT)

REAL filament black 1.75 mm TPU 98A 0.5 kg

Zoom in

2
1
0

Description The black TPU 98A (1.75 mm) is a strong and flexible filament that makes high-speed 3D printing easy. This material produces professional results, with objects that are flexible and heat resistant. TPU 98A is suitable for both Direct and Bowden style 3D printers. A heated bed is not necessary.

Specifications

Tunnel code:	n/a	RAL colour no:	9017
Material:	TPU 98A	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.6 cm
Colour:	black	Spool width:	5.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02322
Brand:	REAL	Replaces item no:	DFF03010

Order now, we can ship this on Monday!

£36.13 (Incl. 20% VAT)
(£30.11 Excl. 20% VAT)

in stock

Realflex blue TPE filament 1.75mm, 0.5kg

Zoom in

Description This blue Realflex filament is biodegradable and made from PLA. It has the strength of PETG, the flexibility of TPC and the ease of use of a PLA filament. Realflex adheres very well to the print bed and has a very low shrinkage factor and virtually no warping during printing. The flexibility can be perfectly determined by varying the wall thickness and infill. Realflex has a very nice matte finish and is super strong.

Note: not every extruder is suitable for printing flexible filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	Realflex	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Inner diameter:	Ø 5.5 cm
Colour:	blue	Spool width:	4.5 cm
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF03007
Length:	165 m

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

Realflex blue TPE filament 1.75mm, 1kg

Zoom in

Description This blue Realflex filament is biodegradable and made from PLA. It has the strength of PETG, the flexibility of TPC and the ease of use of PLA filament. Realflex adheres very well to the print bed and has a very low shrinkage factor and virtually no warping during printing. The flexibility can be perfectly determined by varying the wall thickness and infill. Realflex has a very nice matte finish and is super strong.

Note: not every extruder is suitable for printing flexible filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	Realflex	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Inner diameter:	Ø 5.5 cm
Colour:	blue	Spool width:	8.0 cm
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFF03003
Length:	330 m

Order now, we can ship this on Monday!

£29.71 (Incl. 20% VAT)
(£24.76 Excl. 20% VAT)

in stock

Realflex red TPE filament 1.75mm, 0.5kg

Zoom in

Description This red Realflex filament is biodegradable and made on the basis of PLA. It has the strength of PETG, the flexibility of TPC and the ease of use of a PLA filament. Realflex adheres very well to the print bed and has a very low shrinkage factor and virtually no warping during printing. The flexibility can be perfectly determined by varying the wall thickness and infill. Realflex has a very nice matte finish and is super strong.

Note: not every extruder is suitable for printing flexible filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	Realflex	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Inner diameter:	Ø 5.5 cm
Colour:	red	Spool width:	4.5 cm
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF03006
Length:	165 m

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

Realflex red TPE filament 1.75mm, 1kg

Zoom in

Description This red Realflex filament is biodegradable and made on the basis of PLA. It has the strength of PETG, the flexibility of TPC and the ease of use of PLA filament. Realflex adheres very well to the print bed and has a very low shrinkage factor and virtually no warping during printing. The flexibility can be perfectly determined by varying the wall thickness and infill. Realflex has a very nice matte finish and is super strong.

Note: not every extruder is suitable for printing flexible filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	Realflex	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Inner diameter:	Ø 5.5 cm
Colour:	red	Spool width:	8.0 cm
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFF03002
Length:	330 m

Order now, we can ship this on Monday!

£29.71 (Incl. 20% VAT)
(£24.76 Excl. 20% VAT)

in stock

Realflex white TPE filament 1.75mm, 0.5kg

Zoom in

Description This white Realflex filament is biodegradable and made from PLA. It has the strength of PETG, the flexibility of TPC and the ease of use of PLA filament. Realflex adheres very well to the printbed and has a very low shrinkage factor and virtually no warping during printing. The flexibility can be perfectly determined by varying the wall thickness and inkfill. Realflex has a very nice matte finish and is super strong.

Note: not every extruder is suitable for printing flexible filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	Realflex	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Inner diameter:	Ø 5.1 cm
Colour:	white	Spool width:	4.5 cm
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF03005
Length:	165 m

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

Realflex white TPE filament 1.75mm, 1kg

Zoom in

Description This white Realflex filament is biodegradable and made from PLA. It has the strength of PETG, the flexibility of TPC and the ease of use of PLA filament. Realflex adheres very well to the print bed and has a very low shrinkage factor and virtually no warping during printing. The flexibility can be perfectly determined by varying the wall thickness and infill. Realflex has a very nice matte finish and is super strong.

Note: not every extruder is suitable for printing flexible filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	Realflex	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Inner diameter:	Ø 5.5 cm
Colour:	white	Spool width:	8.0 cm
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFF03001
Length:	330 m

Order now, we can ship this on Monday!

£29.71 (Incl. 20% VAT)
(£24.76 Excl. 20% VAT)

in stock

Realflex black flexible filament 1.75mm, 0.5kg

Zoom in

Description This black Realflex filament is biodegradable and made from PLA. It has the strength of PETG, the flexibility of TPC and the ease of use of a PLA filament. Realflex adheres very well to the print bed and has a very low shrinkage factor and virtually no warping during printing. The flexibility can be perfectly determined by varying the wall thickness and infill. Realflex has a very nice matte finish and is super strong.

Note: not every extruder is suitable for printing flexible filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	Realflex	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	4.5 cm
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF03004
Length:	165 m

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

Realflex black flexible filament 1.75mm, 1kg

Zoom in

Description This black Realflex filament is biodegradable and made from PLA. It has the strength of PETG, the flexibility of TPC and the ease of use of PLA filament. Realflex adheres very well to the print bed and has a very low shrinkage factor and virtually no warping during printing. The flexibility can be perfectly determined by varying the wall thickness and infill. Realflex has a very nice matte finish and is super strong.

Note: not every extruder is suitable for printing flexible filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	Realflex	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	8.0 cm
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFF03000
Length:	330 m

This product can be ordered 1 time(s).

£29.71 (sold out) (Incl. 20% VAT)
(£24.76 Excl. 20% VAT)

BASF Ultrafuse blue TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description This blue BASF Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	5002
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00202
Brand:	BASF

This product is end of life.

BASF Ultrafuse yellow TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The yellow Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made from Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	1003
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-30 °C	Inner diameter:	Ø 4.9 cm
Colour:	yellow	Spool width:	5.7 cm
Nozzle temp range:	230-250 °C	Filament print speed:	-
Amount:	0.5 kg	Our item no:	DFB00203
Brand:	BASF

This product is end of life.

BASF Ultrafuse neutral TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description This neutral colour BASF Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	neutral	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00205

Please note: This product is now 'End of sale'. View all our 1.75mm BASF filament for an alternative.

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse orange TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The orange Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	2008
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	orange	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00206
Brand:	BASF

This product is end of life.

BASF Ultrafuse red TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The red Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	3020
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00207
Brand:	BASF

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse pink TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description This pink Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	pink	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00208

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse black TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The black Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	9005
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-30 °C	Inner diameter:	Ø 4.9 cm
Colour:	black	Spool width:	5.7 cm
Nozzle temp range:	230-250 °C	Filament print speed:	-
Amount:	0.5 kg	Our item no:	DFB00210
Brand:	BASF

This product is end of life.

BASF Ultrafuse transparent TPU 85A filament 1.75mm, 0.75kg

Zoom in

Description The transparent BASF Ultrafuse filament with a diameter of 1.75mm consists of high-quality TPU. Thanks to the shore hardness of 85A, this material is very strong and wear-resistant. Other advantages of the BASF Ultrafuse 85A filament are: a high tensile strength, excellent damping, flexibility at low temperatures and high resistance to grease, oxygen and ozone.

The ideal printing temperature is 200°C to 220°C. For best results, use a heated bed of 40°C.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	TPU 85A	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	40 °C	Spool width:	5.2 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00222
Hardness:	NINJAFLEX

Order now, we can ship this on Monday!

£31.56 (Incl. 20% VAT)
(£26.30 Excl. 20% VAT)

in stock

colorFabb varioShore blue TPU filament 1.75mm, 0.7kg

Zoom in

Description This blue colorFabb filament is a high-quality and lightweight TPU with a diameter of 1.75mm. You can determine the shore hardness of the material by adjusting the temperature and throughput. At temperatures between 200°C and 250°C, the material expands and softens. At temperatures between 190°C and 200°C you can create harder prints. We advise you to choose this filament if you want to print insoles and cosplay parts, for example.

The ideal printing temperature is 190°C to 250°C. For best results, use a heated bed of 20°C to 40°C.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	190-250 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13207
Length:	250 m

Order now, we can ship this on Monday!

£38.80 (Incl. 20% VAT)
(£32.33 Excl. 20% VAT)

in stock

colorFabb varioShore green TPU filament 1.75mm, 0.7kg

Zoom in

Description The green colorFabb filament is high-quality and lightweight TPU with a diameter of 1.75mm. You determine the shore hardness of the material by adjusting the temperature and throughput (speed and layer height). At temperatures between 200°C and 250°C, the material expands and softens. At a temperature between 190°C and 200°C you create harder prints. We advise you to choose this filament if you want to print insoles and cosplay parts, for example.

The ideal print temperature is 190°C to 250°C. For best results, use a heated bed of 20°C to 40°C.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	190-250 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13209
Length:	250 m

Order now, we can ship this on Monday!

£38.80 (Incl. 20% VAT)
(£32.33 Excl. 20% VAT)

in stock

colorFabb varioShore natural TPU filament 1.75mm, 0.7kg

Zoom in

Description This natural-coloured colorFabb filament is high-quality and lightweight TPU with a diameter of 1.75mm. You determine the shore hardness of the material by adjusting the temperature and throughput (speed and layer height). At temperatures between 200°C and 250°C, the material expands and softens. At a temperature between 190°C and 200°C you create harder prints. We advise you to choose this filament if you want to print insoles and cosplay parts, for example.

The ideal printing temperature is 190°C to 250°C. For best results, use a heated bed of 20°C to 40°C.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	190-250 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13171
Length:	250 m

Order now, we can ship this on Monday!

£38.20 (Incl. 20% VAT)
(£31.83 Excl. 20% VAT)

in stock

colorFabb varioShore red TPU filament 1.75mm, 0.7kg

Zoom in

Description The red colorFabb filament is high-quality and lightweight TPU with a diameter of 1.75mm. You determine the shore hardness of the material by adjusting the temperature and throughput (speed and layer height). At temperatures between 200°C and 250°C, the material expands and softens. At a temperature between 190°C and 200°C you create harder prints. We advise you to choose this filament if you want to print insoles and cosplay parts, for example.

The ideal printing temperature is 190°C to 250°C. For best results, use a heated bed of 20°C to 40°C.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	190-250 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13213
Length:	250 m

Order now, we can ship this on Monday!

£38.48 (Incl. 20% VAT)
(£32.07 Excl. 20% VAT)

in stock

colorFabb varioShore black TPU filament 1.75mm, 0.7kg

Zoom in

Description This black colorFabb filament is a high-quality and lightweight TPU with a diameter of 1.75mm. You determine the shore hardness of the material by adjusting the temperature and throughput. At temperatures between 200°C and 250°C, the material expands and softens. At temperatures between 190°C and 200°C you can create harder prints. We advise you to choose this filament if you want to print insoles and cosplay parts, for example.

The ideal printing temperature is 190°C to 250°C. For best results, use a heated bed of 20°C to 40°C.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	190-250 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13169
Length:	250 m

Order now, we can ship this on Monday!

£38.75 (Incl. 20% VAT)
(£32.29 Excl. 20% VAT)

in stock

colorFabb varioShore pale pink TPU Prosthetic filament 1.75mm, 0.7kg

Zoom in

Description This pale pink colorFabb TPU Prosthetic filament has been specially developed for printing prostheses and orthoses. The filament contains silver, which has favourable properties for prosthetic and orthopaedic applications. TPU Prosthetic has a variable hardness, is low in weight and soft to the touch.

VarioShore TPU Prosthetic filament is available in a natural colour and in three skin colours: pale pink, medium brown and dark brown. If you print the filament at a lower temperature, the print will have a more intense skin colour. A higher temperature produces a more powdery skin tone with a soft appearance.

This colorFabb pale pink filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	pink	Filament print speed:	-
Nozzle temp range:	190-250 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13233
Length:	250 m

Order now, we can ship this on Monday!

£38.80 (Incl. 20% VAT)
(£32.33 Excl. 20% VAT)

in stock

colorFabb varioShore dark brown TPU Prosthetic filament 1.75mm, 0.7kg

Zoom in

Description This dark brown colorFabb TPU Prosthetic filament has been specially developed for printing prostheses and orthoses. The filament contains silver, which has favourable properties for prosthetic and orthopaedic applications. TPU Prosthetic has a variable hardness, is low in weight and soft to the touch.

VarioShore TPU Prosthetic filament is available in a natural colour and in three skin colours: pale pink, medium brown and dark brown. If you print the filament at a lower temperature, the print will have a more intense skin colour. A higher temperature produces a more powdery skin tone with a soft appearance.

This colorFabb dark brown filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	brown	Filament print speed:	-
Nozzle temp range:	190-250 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13227
Length:	250 m

Order now, we can ship this on Monday!

£38.20 (Incl. 20% VAT)
(£31.83 Excl. 20% VAT)

in stock

colorFabb varioShore medium brown TPU Prosthetic filament 1.75mm, 0.7kg

Zoom in

Description This medium brown colorFabb TPU Prosthetic filament has been specially developed for printing prostheses and orthoses. The filament contains silver, which has favourable properties for prosthetic and orthopaedic applications. TPU Prosthetic has a variable hardness, is low in weight and soft to the touch.

VarioShore TPU Prosthetic filament is available in a natural colour and in three skin colours: pale pink, medium brown and dark brown. If you print the filament at a lower temperature, the print will have a more intense skin colour. A higher temperature produces a more powdery skin tone with a soft appearance.

This colorFabb medium brown filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	brown	Filament print speed:	-
Nozzle temp range:	190-250 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13229
Length:	250 m

Order now, we can ship this on Monday!

£38.80 (Incl. 20% VAT)
(£32.33 Excl. 20% VAT)

in stock

colorFabb varioShore natural TPU Prosthetic filament 1.75mm, 0.7kg

Zoom in

Description This natural colorFabb TPU Prosthetic filament has been specially developed for printing prostheses and orthoses. The filament contains silver, which has favourable properties for prosthetic and orthopaedic applications. TPU Prosthetic has a variable hardness, is low in weight and soft to the touch.

This colorFabb filament in a natural colour has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	190-250 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13231
Length:	250 m

Order now, we can ship this on Monday!

£38.80 (Incl. 20% VAT)
(£32.33 Excl. 20% VAT)

in stock

eSun eFlex neutral filament 1.75mm, 1kg

Zoom in

Description The neutral flexible TPU consumables with a hardness of 87A are strong and durable; the printed product is softer than TPU-95A, but harder than the eLastic printed product.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	EFLEX	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	60-110 °C	Spool width:	6.5 cm
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	190-220 °C	Our item no:	DFE20121
Amount:	1 kg

Order now, we can ship this on Monday!

£26.00 (Incl. 20% VAT)
(£21.67 Excl. 20% VAT)

in stock

eSun eLastic neutral filament 1.75mm, 1kg

Zoom in

Description Flexible TPE printing consumables with hardness of 83A are sturdy and durable; Printed models are softer than TPU-95A and eFlex, with delicate and soft hand feeling, also low surface friction.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	ELASTIC	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-90 °C	Spool width:	6.5 cm
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	210-230 °C	Our item no:	DFE20122
Amount:	1 kg

This product is end of life.

eSun ePA Nylon filament 1.75mm Neutral 1kg

Zoom in

Description

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	EPA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	240-260 °C	Our item no:	DFE20038
Amount:	1 kg

Order now, we can ship this on Monday!

£24.00 (Incl. 20% VAT)
(£20.00 Excl. 20% VAT)

in stock

eSun ePA-CF Nylon with carbon fibre filament 1.75mm Neutral 1kg

Zoom in

Description

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	EPA CF	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	240-260 °C	Our item no:	DFE20040
Amount:	1 kg

Order now, we can ship this on Monday!

£35.00 (Incl. 20% VAT)
(£29.17 Excl. 20% VAT)

in stock

eSun PVA filament 1.75mm Neutral 0.5kg

Zoom in

Description

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PVA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	3.5 cm
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	180-210 °C	Our item no:	DFE20119
Amount:	0.5 kg

Order now, we can ship this on Monday!

£26.95 (Incl. 20% VAT)
(£22.46 Excl. 20% VAT)

in stock

NinjaTek Cheetah midnight black TPU semi-flexible filament 1.75mm, 0.5kg

Zoom in

Description This midnight black Cheetah 3D filament (1.75mm) is a semi-flexible TPU filament, which is slightly stiffer than Ninjaflex. Cheetah can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable. The Cheetah filament is best printed on the ABS settings of your 3D printer.

Read more about printing with TPU filament here.

Specifications

Tunnel code:	n/a	Length:	170 m
Material:	TPU	Brand:	NinjaTek
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-50 °C	Inner diameter:	Ø 5.1 cm
Colour:	black	Spool width:	5.5 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF02030
Hardness:	SEMIFLEX

Order now, we can ship this on Monday!

£36.22 (Incl. 20% VAT)
(£30.18 Excl. 20% VAT)

in stock

NinjaTek Cheetah midnight black TPU semi-flexible filament 1.75mm, 1kg

Zoom in

Description This midnight black 3D filament (1.75mm) is a semi-flexible TPU filament type, which is slightly stiffer than Ninjaflex. Cheetah can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Specifications

Tunnel code:	n/a	Hardness:	SEMIFLEX
Material:	TPU	Brand:	NinjaTek
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-50 °C	Inner diameter:	Ø 5.1 cm
Colour:	black	Spool width:	5.5 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFF02018

Order now, we can ship this on Monday!

£61.50 (Incl. 20% VAT)
(£51.25 Excl. 20% VAT)

in stock

NinjaTek Cheetah snow white TPU semi-flexible filament 1.75mm, 0.5kg

Zoom in

Description This snow white Cheetah 3D filament (1.75mm) is a semi-flexible TPU filament, which is slightly stiffer than Ninjaflex. Cheetah can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable. The Cheetah filament is best printed on the ABS settings of your 3D printer.

Read more about printing with TPU filament here.

Specifications

Tunnel code:	n/a	Length:	170 m
Material:	TPU	Brand:	NinjaTek
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-50 °C	Inner diameter:	Ø 5.1 cm
Colour:	white	Spool width:	5.5 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF02031
Hardness:	SEMIFLEX

Order now, we can ship this on Monday!

£36.22 (Incl. 20% VAT)
(£30.18 Excl. 20% VAT)

in stock

NinjaTek Chinchilla NT midnight black TPE filament 1.75mm, 0.5kg

Zoom in

Description NinjaTek Chinchilla NT midnight black is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing of soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This roll contains 0.5kg filament of 1.75mm. NinjaTek Chinchilla NT midnight black has been tested for skin safety.

Specifications

Tunnel code:	n/a	Brand:	NinjaTek
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	midnight black	Hazard class:	n/a
Nozzle temp range:	225-235 °C	Safety datasheet:	Technical information
Amount:	0.5 kg	Our item no:	DFF02105
Hardness:	75A

Order now, we can ship this on Monday!

£44.59 (Incl. 20% VAT)
(£37.16 Excl. 20% VAT)

in stock

NinjaTek Chinchilla NT snow white TPE filament 1.75mm, 0.5kg

Zoom in

Description NinjaTek Chinchilla NT snow white is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing of soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This roll contains 0.5kg filament of 1.75mm. NinjaTek Chinchilla NT snow white has been tested for skin safety.

Specifications

Tunnel code:	n/a	Brand:	NinjaTek
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	snow white	Hazard class:	n/a
Nozzle temp range:	225-235 °C	Safety datasheet:	Technical information
Amount:	0.5 kg	Our item no:	DFF02101
Hardness:	75A

Order now, we can ship this on Monday!

£44.59 (Incl. 20% VAT)
(£37.16 Excl. 20% VAT)

in stock

NinjaTek Chinchilla NT snow white TPE filament 1.75mm, 1kg

Zoom in

Description NinjaTek Chinchilla NT snow white is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing of soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This roll contains 1kg of filament of 1.75mm. NinjaTek Chinchilla NT snow white has been tested for skin safety.

Specifications

Tunnel code:	n/a	Brand:	NinjaTek
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	snow white	Hazard class:	n/a
Nozzle temp range:	225-235 °C	Safety datasheet:	Technical information
Amount:	1 kg	Our item no:	DFF02103
Hardness:	75A

This product can be ordered 1 time(s).

£77.14 (Incl. 20% VAT)
(£64.28 Excl. 20% VAT)

14 day delivery

NinjaTek NinjaFlex lava orange TPU filament 1.75mm, 0.5kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, NinjaFlex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Specifications

Tunnel code:	n/a	Length:	170 m
Material:	TPU 85A	Brand:	NinjaTek
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-50 °C	Inner diameter:	Ø 5.1 cm
Colour:	orange	Spool width:	5.5 cm
Nozzle temp range:	220-230 °C	Hazard class:	n/a
Amount:	0.5 kg	Safety datasheet:	Technical information
Hardness:	NINJAFLEX	Our item no:	DFF02007

Order now, we can ship this on Monday!

£36.22 (Incl. 20% VAT)
(£30.18 Excl. 20% VAT)

in stock

NinjaTek NinjaFlex midnight black TPU filament 1.75mm, 1kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, NinjaFlex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Specifications

Tunnel code:	n/a	Brand:	NinjaTek
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	20-50 °C	Spool width:	5.5 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	220-230 °C	Safety datasheet:	Technical information
Amount:	1 kg	Our item no:	DFF02077
Hardness:	NINJAFLEX

Order now, we can ship this on Monday!

£54.41 (Incl. 20% VAT)
(£45.34 Excl. 20% VAT)

in stock

NinjaTek NinjaFlex snow white TPU filament 1.75mm, 0.5kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, NinjaFlex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Specifications

Tunnel code:	n/a	Length:	170 m
Material:	TPU	Brand:	NinjaTek
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-50 °C	Inner diameter:	Ø 5.1 cm
Colour:	white	Spool width:	5.5 cm
Nozzle temp range:	220-230 °C	Hazard class:	n/a
Amount:	0.5 kg	Safety datasheet:	Technical information
Hardness:	NINJAFLEX	Our item no:	DFF02002

Order now, we can ship this on Monday!

£35.22 (Incl. 20% VAT)
(£29.35 Excl. 20% VAT)

in stock

NinjaTek NinjaFlex snow white TPU filament 1.75mm, 1kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, NinjaFlex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Specifications

Tunnel code:	n/a	Brand:	NinjaTek
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	20-50 °C	Spool width:	5.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	220-230 °C	Safety datasheet:	Technical information
Amount:	1 kg	Our item no:	DFF02084
Hardness:	NINJAFLEX

Order now, we can ship this on Monday!

£54.41 (Incl. 20% VAT)
(£45.34 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

View all flexible filaments

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

View all flexible filaments