View all Support filaments

BASF Ultrafuse neutral HIPS filament 1.75mm, 0.75kg

Description This BASF Ultrafuse HIPS filament is very versatile and can be used as a base filament or, when combined with ABS, as a support material. This filament has a neutral colour and can be dissolved in limonene. The print temperature is between 240°C and 260°C.

Specifications

Material:	HIPS	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	100 - 120 °C	Spool width:	5.2 cm
Colour:	Neutral	Filament print speed:	-
Nozzle temp range:	240 - 260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00044
Brand:	BASF

Order now, we can ship this today!

£38.74

£32.28 Excl. 20% VAT

In stock

eSun PVA filament 1.75mm Neutral 0.5kg

Zoom in

Description

Specifications

Material:	PVA	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Inner diameter:	Ø 5.0 cm
Colour:	Neutral	Spool width:	3.5 cm
Nozzle temp range:	180 - 210 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE20119

Order now, we can ship this today!

£25.00

£20.83 Excl. 20% VAT

In stock

Polymaker PolyDissolve natural S1 filament 1.75mm, 0.75kg

Zoom in

Description This natural-coloured Polymaker Polydissolve S1 is a soluble filament. With this filament, you'll have greater design freedom. Polydissolve S1 is a water-soluble support material for filaments based on PLA, TPU, PVB and Nylon. It has perfect adhesion with these materials and at the same time offers good solubility. The natural filament has a diameter of 1.75mm and a weight of 0.75kg.

Specifications

Material:	PolyDissolve S1	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm
Colour:	Natural	Filament print speed:	-
Nozzle temp range:	210 - 225 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14010
Brand:	Polymaker

Order now, we can ship this today!

£56.00

£46.67 Excl. 20% VAT

In stock

REAL filament neutral 1.75mm PVA 0.5 kg

Zoom in

Description This Real PVA (PolyVinylAlcohol) filament is a (warm) water soluble filament that is ideal to use as a support when printing objects with PLA or ABS. This allows you to print objects that would otherwise not be possible. Because the PVA filament reacts very quickly with water, it is very important to store the spool at room temperature under the dryest possible conditions after opening. The heated bed can be set to the same temperature as for ABS or PLA.

The maximum printing temperature is 210°C

Read more about printing with PVA filament here .

Specifications

Material:	PVA	Roundness:	>95%
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Inner diameter:	Ø 5.6 cm
Colour:	Neutral	Spool width:	7.0 cm
Nozzle temp range:	190 - 210 °C	Hazard class:	n/a
Max deviation:	± 0.05 mm	Our item no:	DFP02384
Amount:	0.5 kg	Replaces item no:	DFV02000
Brand:	REAL

£33.96

£28.30 Excl. 20% VAT

14 day delivery

123-3D Adhesive Spray (150 ml)

Zoom in

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Volume:	150 ml	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR02393
Download SDS:	Download

Order now, we can ship this today!

£6.50

£5.42 Excl. 20% VAT

In stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Material:	Steel	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR00620

Order now, we can ship this today!

£8.25

£6.88 Excl. 20% VAT

In stock

BIQU Panda Storage Rack for 3D Print Filament

Zoom in

Description The BIQU Panda Feed Rack is a robust and space-saving storage system for your 3D printer filaments. Thanks to its stackable design and narrow depth, this rack accommodates up to 40+ spools without taking up unnecessary space on your workspace. Ideal for home use or in a professional workshop.

Specifications

Dimensions:	635 x 330 x 1,320 mm	Brand:	BIQU
Quantity:	1	Hazard class:	n/a
Colour:	Black	Our item no:	DAR02687

£50.50

£42.08 Excl. 20% VAT

14 day delivery

eSun eVacuum kit Pro 3

Zoom in

Description Keep your filament dry and dust free with the eSun eVacuum kit Pro 3. This kit allows you to vacuum seal your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-colored closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Dimensions:	32 x 32 x 102 mm	Weight:	0.075 kg
Voltage:	5 v	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01277

Order now, we can ship this today!

£20.39

£16.99 Excl. 20% VAT

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	30 W	Brand:	Modifi3D
Max operating temp:	450 °C	Weight:	0.12 kg
Voltage:	24 v	Hazard class:	n/a
Cable length:	150 cm	Our item no:	DGS00090

Order now, we can ship this today!

£65.50

£54.58 Excl. 20% VAT

In stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007
Brand:	Modifi3D

Extra information

Instructional video

Order now, we can ship this today!

£29.95

£24.96 Excl. 20% VAT

In stock

SUNLU Filament Connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different color. This way you can create personalized 3D prints with unique colorful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Sunlu	Our item no:	DAR01819
Manual:	Download

Order now, we can ship this today!

£39.95

£33.29 Excl. 20% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications