3D Printers, Filament & Tools | Best prices UK

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Dimensions:	265 x 118 x 274 mm	Voltage:	24 v
Power rating:	48 W	Brand:	Sunlu
Input voltage:	100-240V	Weight:	11.9 kg
Temp range:	35-70 °C	Hazard class:	n/a
Colour:	Black	Our item no:	DAR00698

Order now, we can ship this on Monday!

£44.90

£37.42 Excl. 20% VAT

In stock

SUNLU UV Resin Curing Chamber

Zoom in

Description The SUNLU UV Resin curing chamber has 16 UV LED lights that cure your resin 3D print perfectly. The room has a 360 degree platform with an improved motor. This will cause all sides of your print to harden evenly. Because the room is completely closed, there is no light pollution. The real-time display shows how long the resin still needs to harden, so you will not be faced with any surprises. The internal dimensions of the room are 20.5 x 17 x 15.5 cm (dxwxh) and the timer can be set between 1 and 600 seconds.

Specifications

Brand:	Sunlu	Our item no:	DAR01386
Hazard class:	n/a

£44.50

£37.08 Excl. 20% VAT

14 day delivery

SUNLU FilaDryer S4

Zoom in

2
1
0

Description Keep your filament dry and in perfect condition with the S4 Drybox from SUNLU. There is room for no less than 4 spools of 1 kg, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0 mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458 x 218 x 312 mm.

Specifications

Dimensions:	516 x 278 x 350 mm	Weight:	4.8 kg
Power rating:	320 W	Hazard class:	n/a
Input voltage:	110-240V	Our item no:	DAR01448
Brand:	Sunlu

Order now, we can ship this on Monday!

£105.00

£87.50 Excl. 20% VAT

In stock

SUNLU Filament Connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different color. This way you can create personalized 3D prints with unique colorful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Sunlu	Our item no:	DAR01819

Order now, we can ship this on Monday!

£39.95

£33.29 Excl. 20% VAT

In stock

SUNLU Filament Connector - PTFE Set (200 pieces)

Zoom in

Description This kit contains 200 PTFE tubes, allowing you to replace the existing PTFE tubes in your SUNLU Filament Connector. This way, you can quickly get back to making your 3D prints.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Sunlu	Our item no:	DAR01925

£8.68

£7.23 Excl. 20% VAT

14 day delivery

SUNLU FilaDryer E2

Zoom in

Description Always perfect 3D prints with the FilaDryer E2 from SUNLU. Thanks to the ultra-high heating power of 500 W PTC, this box can heat up to 50 ˚ C in just 20 minutes and to 70 ˚ C within 30 minutes. The maximum temperature is 110 ˚ C.

Handy & safe
The box is airtight thanks to the silicone seal, which prevents moisture and dust from reaching the filament rolls. The maximum size of suitable spools is Φ 250 mm x 153 mm and it can hold 2 normal spools of 1 or 2 kg, or 1 normal spool of 3 kg. With one click of a button, you can choose from built-in filament settings. In addition, this box is also safe to use thanks to its intelligent safety system. It is made of fire-resistant material and has a double insulation layer, so that the outside does not get extremely hot.

Annealing
The handy FilaDryer E2 can not only dry filament, but also anneal it. Annealing a 3D print increases impact resistance and durability. When heated to 110 ˚ C, 99.99% of technical materials, such as ABS, ASA, PC, CoPA, PA6-CF, can be annealed. The all-round design and innovative locking system ensure that the annealing process runs perfectly. Annealing is perfect for making helmets, screws, nuts and drone accessories.

Specifications

Dimensions:	400 x 220 x 307 mm	Brand:	Sunlu
Power rating:	500 W	Weight:	6.1 kg
Input voltage:	110-240V	Hazard class:	n/a
Temp range:	-	Our item no:	DAR01969

Please note: This item is expected September 2025.

£293.00 (sold out)

£244.17 Excl. 20% VAT

SUNLU marble PLA filament 1.75mm, 1kg

Zoom in

Description With 1.75mm marble PLA filament you can give your prints a unique appearance. Create objects with a realistic marble look, such as busts, sculptures, miniatures or buildings. The PLA filament is easy to print with (without a heated bed) and ensures that you do not suffer from distortion and warping of prints.

Specifications

Material:	PLA	Brand:	Sunlu
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 30 °C	Outer diameter:	Ø 19.6 cm
Colour:	Marble	Inner diameter:	Ø 7.3 cm
Nozzle temp range:	200 - 230	Spool width:	6.0 cm
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP00171
Length:	330 m

Order now, we can ship this on Monday!

£14.00

£11.67 Excl. 20% VAT

In stock

SUNLU silk rainbow PLA filament 1.75mm, 1kg

Zoom in

Description Want to create beautiful prints with a rainbow effect? It's easy with this silk rainbow filament from SUNLU. This coil contains filament in seven different colours: red, orange, yellow, green, blue, purple and pink. The roll starts at one of these colours and changes to the next colour of the rainbow after about 15 meters. The multicoloured PLA filament is easy to print with (without heated bed) and provides a silky gloss finish.

Specifications

Material:	PLA	Brand:	Sunlu
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	60 °C	Outer diameter:	Ø 19.6 cm
Colour:	Silk Rainbow	Inner diameter:	Ø 7.3 cm
Nozzle temp range:	220 - 230	Spool width:	6.0 cm
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP00172
Length:	330 m

Order now, we can ship this on Monday!

£22.00

£18.33 Excl. 20% VAT

In stock

SUNLU rainbow PLA filament 1.75mm, 1kg

Zoom in

Description Want to create beautiful prints with a rainbow effect? It's easy with this Rainbow filament from SUNLU. This coil contains filament in six different colours, which alternate several times: red, orange, yellow, green, blue and purple. The multicoloured PLA filament is easy to print with (without a heated bed) and ensures that you do not suffer from bumps.

Specifications

Material:	PLA	Brand:	Sunlu
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 30 °C	Outer diameter:	Ø 19.6 cm
Colour:	Rainbow	Inner diameter:	Ø 7.3 cm
Nozzle temp range:	200 - 230 °C	Spool width:	6.0 cm
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP00173
Length:	330 m

Order now, we can ship this on Monday!

£19.00

£15.83 Excl. 20% VAT

In stock

Quantity	Product
No products
Total: £0.00

Top Rated Seller

Payment options

Follow us on social media

Official dealer

SUNLU