Prusa

The Prusa Nozzle ObXidian is a high-quality nozzle designed specifically for Nextruder. It is made from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly suitable for printing with abrasive materials like carbon fiber, as they maintain their hardness even at higher temperatures, delivering excellent performance and extending the lifespan of your nozzle.

This product includes:

• 0.6mm Prusa Nozzle ObXidian (1x)

The Prusa Nozzle ObXidian is a high-quality nozzle designed specifically for Nextruder. It is made from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly suitable for printing with abrasive materials like carbon fiber, as they maintain their hardness even at higher temperatures, delivering excellent performance and extending the lifespan of your nozzle.

This product includes:

• 0.4mm Prusa Nozzle ObXidian (1x)

• 0.6mm Prusa Nozzle Brass x1

• 0,.4mm Prusa Nozzle Brass x1

The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).

Polycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.

WARNING:

Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time.

Note: Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. 

WARNING:
Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. 

Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

Compatible with: MK3S, MK3, MK2.5S, MK2.5, MMU2S, MK3S+, MMU2, MK4, MK3.9, MMU3, MK3.5, MK4S, MK3.9S, CORE ONE

The MK4->MK4S Upgrade Kit contains everything you need to fully upgrade your stock MK4 3D printer to the new MK4S.

The upgrade is supplied as a kit - you need to assemble it yourself. Before you order the upgrade, please check which xLCD your printer came with. This upgrade is for the new version of xLCD.

Every Original Prusa 3D printer receives long-term support for years after launch. Not just small bugfixes, but major firmware and hardware upgrades that bring useful new features. And MK4 is no exception.

Compared to the Original Prusa MK4, the MK4S brings the following innovations:

• New high-performance 360° cooling system
• High-quality high-flow nozzle as standard
• Native iOS/Android Prusa app for iOS and Android with easy Wi-Fi setup with an NFC tap
• Improved print speed
• Improved print quality
• New parts printed from Prusament PC Blend Carbon Fiber or injection molded
• Optional accessory: GPIO hackerboard
• Optional accessory: accelerometer for printer modders

• 1x XL Single-Tool Nextruder Upgrade
  - Includes 0.4mm nozzle (for existing Nextruder)
• 4x XL Multi-Tool Nextruder (with 0.4 mm nozzle)
  - Includes spool holder and Prusa Nextruder sock
• 1x XL Electronic Expansion kit
  - XL Splitter board
  - Extra power supply
• 2x extra 0.4mm nozzles

Introducing Original Prusa XL Enclosure: Modular box for your XL 3D printer.

Original Prusa XL Enclosure is an optional accessory which seamlessly integrates with the Original Prusa XL 3D printer. It provides a stable printing environment with increased temperatures, making printing from advanced materials (PCCF, Nylon, PP, ASA, and more) much easier. It eliminates drafts, prevents warping and thanks to the Advanced Filtration System (HEPA filter, 99.9% efficiency) it also helps to reduce odors and prevents the spread of ultra-fine particles (UFPS) into the air. The Enclosure also lowers printer noise and covers every moving part of your printer.

The Original Prusa XL Enclosure is shipped disassembled as a kit.
Tools included

• 3x XL Multi-Tool Nextruder (with 0.4 mm nozzle)
  - Includes spool holder and Prusa Nextruder sock
• 1x XL Electronic Expansion kit
  - XL Splitter board
  - Extra power supply
• 2x 0.4mm nozzle (for existing Nextruder)

The Original Prusa MMU3 is our latest solution for printing with up to five filaments at the same time with high speed and low waste. As an add-on for the Original Prusa MK3.9S + and MK4S, it enables automatic switching between loaded materials. MMU3 is fully supported in PrusaSlicer by an easy multi-material painting tool, and it offers efficient and filament-saving color printing to everybody.

An optional add-on that allows your single-extruder printer to print with up to 5 colors (materials) at the same time. The MMU3 contains five filament insertion points. Load up to five colors of your choice, slice the object in PrusaSlicer and start the print. The system automatically selects filament using the selector, loads it into the extruder and the printer starts printing. When it’s time to change the color or material, it also happens automatically.

The high-flow nozzle in the MK4S allows for much faster printing. However, when using the MMU3, the standard nozzle makes more sense. While the MMU3 works fine with a high-flow nozzle, the increased volumetric flow results in higher filament waste during printing. In other words, the MMU3 delivers the best performance, the same speed and the highest efficiency (lowest waste) when combined with the standard nozzle in the MK4S.

This product is supplied as a kit. Assembly is required

Prusa CORE One+ Conversion kit contains all parts you need to transform your Original Prusa MK4S into the fully enclosed CoreXY 3D printer, the Prusa CORE One+. This kit is compatible with the MK4S only!

The silver PSU is not compatible with the conversion kit.

Transform your Original Prusa MK4S into the brand new, fully enclosed CoreXY 3D printer and upgrade your printing experience. Once you’re finished with the assembly, your new printer is going to be not only faster, but it will also take up less space, print larger models and tackle even demanding filaments like PCCF or Nylon without warping. In the Conversion Kit, you will find everything you need to perform the entire process and end up with the Prusa CORE One+ without any compromise.

The Prusa CORE One+ utilizes many proven parts from the Original Prusa MK4S. This is why it is possible to convert your existing 3D printer into the new Prusa CORE One+. You can easily reuse your current print sheets, hotends, nozzles, and many other parts.

This upgrade is for the newer version of xLCD.

This product includes:

• Prusa Nozzle brass - selected size (1pc)
• Nextruder Heaterblock (1pc)
• Heater 40 W - 120 mm set (1pc)
• Thermistor NTC 100k - 115 mm (1pc)

• XL Single-Tool Nextruder Upgrade
  - Includes a 0.4mm nozzle (for existing Nextruder)
• XL Multi-Tool Nextruder
• Tool Changer

• Build area: 250×210×220 mm (WxDxH)
• Layer height: 0.05 - 0.30 mm
• 1.75mm filaments: Not vendor-locked
• 0.4mm nozzle: Easy-to-swap
• Removable print sheets
• Open-source community-friendly

• Build area: 250×210×220 mm (WxDxH)
• Layer height: 0.05 - 0.30 mm
• 1.75mm filaments: Not vendor-locked
• 0.4mm nozzle: Easy-to-swap
• Removable print sheets
• Open-source community-friendly

The CORE One L is much more than just a larger CORE One. Prusa didn't just scale it up; they took everything that worked great and added features for effortless large-format printing.

For the body, they have chosen an effective combination of a solid steel frame and aluminum panels to create a lightened version of our proven exoskeleton design. And the results are compelling: the machine’s outside dimensions are only 10% larger than the CORE One, yet it maintains the same weight, and the print volume is doubled!

The standard heatbed has been replaced with our new AC convection heatbed with active air circulation for flawless heat distribution in the chamber. The printer comes with a detachable 1080p camera with night vision, two nozzles in the package, fully automatic chamber temperature management, easier FLEX filament feeding, and much more.

This machine covers everything: from ambitious hobby projects to highly demanding manufacturing!