Creality 3D CR-10 smart pro upgrades CR-10 Smart pro Creality 3D Parts finder Creality 3D Sprite Extruder Pro 300℃ High Temperature

Creality 3D Sprite Extruder Pro 300℃ High Temperature | All Metal Design NOT A FULL KIT

Description Use the Sprite Extruder Pro 300°C High Temperature | All Metal Design from Creality 3D for your 3D printer. The part weighs 288g and has a small size of 54mm x 50mm x 64.3mm. More stable printing is possible thanks to the dual gear system. The extruder makes it possible to print materials at high temperatures of up to 300°C. The part can easily switch between air-cooled and water-cooled heat dissipation. This Creality 3D extruder is suitable for various filaments such as PLA, TPU, PETG and ABS.

This upgrade is suitable for the Ender-3 S1 and the CR-10 Smart Pro printers from Creality 3D.
Note: This is only the Sprite extruder and is not a full kit.

Specifications

Dimensions:	64.3 x 50 x 54 mm	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR00822
Brand:	Creality 3D	Printer extruder max temp:	300 °C
Weight:	0.288 kg

Note: This is only the Sprite extruder and is not a full kit.
If this item is returned and original tamper seal is broken, this will attract a partial refund only as per our terms.

Order now, we can ship this today!

£60.49

£50.41 Excl. 20% VAT

In stock

Bondtech LGX Lite Arrow for Creality

Zoom in

Description The Bondtech LGX Lite Arrow Creality converts Bowden's compatible printers to direct extruder. The housing is easy to remove and you can easily adjust the z-position of the fan. The upgrade kit is compatible with all standard hotends and cooling fans. Use the LGX Lite Arrow for your Creality CR-6 SE, CR-6 Max or CR-10 Smart 3D printer. This kit includes an extruder mounting kit and a housing kit.

1x LGX Lite extruder mounting kit:

1x PA12 Extruder Mount
1x PA12 hotend mount
4x M3 x 6 button head screw
2x M3 x 10 button head screw
2x M3 x 8 button head screw
1x M3 x 30 screw
1x M3 square nut
1x Capricorn cutting device
1x 70mm Capricorn tube

1x LGX Lite Arrow housing set:

1x PA12 front housing
1x PA12 left wing
1x PA12 right wing
1x PA12 top cover
1x PA12 fan shroud
1x PA12 (breakout board/cables) cover
2x M3 x 8 button head screw
1x M3 x 16 screw
2x M3 x 20 MC6S screw
3x M3 square nut

Specifications

Material:	Nylon PA12	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DAR00826
Weight:	0.065 kg

Order now, we can ship this today!

£53.50

£44.58 Excl. 20% VAT

In stock

Creality 3D Sonic Pad

Zoom in

Description With the Creality 3D Sonic Pad you can easily take the ease of use and speed of your 3D printer to a higher level.

This compact control pad runs on Klipper, an open-source 3D printer firmware. Klipper uses the additional computing power of Sonic Pad to support your printer's motherboard. As a result, the motors of your 3D printer are controlled faster and more accurately with smart algorithms. In this way vibrations and resonances are prevented and the end result remains of a very high quality, despite the higher printing speed.

The software and hardware of the Sonic Pad are fully coordinated and brought together in one integrated housing. The large 7 inch touch screen gives you easy access to the various functions and settings. If you are working with Creality Print, UTimaker Cura, Pursa Slicer or Super Slicer the screen can show G-Code model previews.

The Creality Sonic Pad works with almost every FDM 3D printer. You only need to connect the device to the tablet via a USB cable, after which you can configure the whole thing with the included manual. Are you using the Sonic Pad with an Ender-3 (V2, S1 or S1 Pro) 3D printer? Then the settings are already pre-configured and you can discover the possibilities almost immediately. You can also connect the Sonic Pad to your network and control it over the web. Connect a USB webcam and you can even check the progress of your print remotely.

Specifications

Dimensions:	222 x 128 x 40 mm	Weight:	0.46 kg
Colour:	Black	Standard WiFi connection:	802.11 b/g/n
Voltage:	12 v	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR00885

Order now, we can ship this today!

£99.90

£83.25 Excl. 20% VAT

In stock

Micro Swiss Heater Block with silicone sock for Creality CR-6 S

Zoom in

Description The Micro Swiss Heater Block with silicone sock is an upgrade for various Creality printers, among others.

Aluminum Heater Block
Silicone Sock
Allen key

Compatible with the following printers:

Creality CR-6 SE
CR-6 SE MAX
CR-10 Smart

Specifications

Material:	Aluminum	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR00914

£10.87 (sold out)

£9.06 Excl. 20% VAT

Micro Swiss high temperature MK8 heater block upgrade

Zoom in

Description The Micro Swiss heating block upgrade is made of a high-temperature copper-chrome-zirconium alloy allows you to reach temperatures of up to 500°C. This special alloy retains its strength at much higher temperatures compared to a normal copper alloy.

It is compatible with 100K thermistor, cartridge-style thermistors, thermocouple, PT100 and PT1000 sensors.

Specifications