Microswiss

1 - 24 of 132

Micro Swiss NG Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

Description The NG Direct Drive Extruder from Micro Swiss is suitable for Creality CR-10 and Ender 3 printers. Thanks to the Bevel Gear design, the extruder has a short filament path of less than 41 mm. The placement of the motor allows for a very compact design with little overhang. This increases the rigidity of the system.

Further highlights:

Dual-gear drive made of hardened steel
3:1 gear ratio
Lightweight
Integrated with an all-metal hotend

This product contains:

Screws and wrenches
1x mounting plate
1x hot end
1x extension cable
1x Stepper Motor
1x Extruder Assembly
1x fan shroud

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR00798
Manual:	Manual

£107.75

£89.79 Excl. 20% VAT

14 day delivery

Micro Swiss brass coated nozzle for Creality CR-X Series | 1.75mm x 0.60mm

Zoom in

Description The Micro Swiss Brass coated nozzle is suitable for your Creality CR-X printer. The part has a length of 1.75mm and an opening size of 0.60mm.

Specifications

Material:	Brass	Nozzle type:	-
Filament diameter:	1.75 mm	Nozzle coating:	twinclad XT
Nozzle diameter:	0.6 mm	Hazard class:	n/a
Screwthread type:	M6X75	Our item no:	DAR00801
Brand:	Micro Swiss

£15.22

£12.68 Excl. 20% VAT

14 day delivery

Micro Swiss brass coated nozzle for Creality Ender 7 hotend | 1.75mm x 0.40mm

Zoom in

Description The Micro Swiss Brass coated nozzle is suitable for the Creality Ender 7 hotend. The part has a length of 1.75mm and an opening size of 0.40mm. This nozzle is also suitable for the Creality 3D Spider hotend.

Specifications

Material:	Brass	Nozzle type:	-
Filament diameter:	1.75 mm	Nozzle coating:	twinclad XT
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DAR00836
Brand:	Micro Swiss

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

Order now, we can ship this on Monday!

£14.95

£12.46 Excl. 20% VAT

In stock

Micro Swiss brass coated nozzle for Creality Ender 7 hotend | 1.75mm x 0.60mm

Zoom in

Description The Micro Swiss Brass coated nozzle is suitable for the Creality Ender 7 hotend. The part has a length of 1.75mm and an opening size of 0.60mm. This nozzle is also suitable for the Creality 3D Spider hotend.

Specifications

Material:	Brass	Nozzle type:	-
Filament diameter:	1.75 mm	Nozzle coating:	twinclad XT
Nozzle diameter:	0.6 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DAR00837
Brand:	Micro Swiss

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

Order now, we can ship this on Monday!

£15.50

£12.92 Excl. 20% VAT

In stock

Micro Swiss brass coated nozzle for Creality Ender 7 hotend | 1.75mm x 0.80mm

Zoom in

Description The Micro Swiss Brass coated nozzle is suitable for the Creality Ender 7 hotend. The part has a length of 1.75mm and an opening size of 0.80mm. This nozzle is also suitable for the Creality 3D Spider hotend.

Specifications

Material:	Brass	Nozzle type:	-
Filament diameter:	1.75 mm	Nozzle coating:	twinclad XT
Nozzle diameter:	0.8 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DAR00838
Brand:	Micro Swiss

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

Order now, we can ship this on Monday!

£15.50

£12.92 Excl. 20% VAT

In stock

Micro Swiss Heater Block with silicone sock for Creality CR-6 S

Zoom in

Description The Micro Swiss Heater Block with silicone sock is an upgrade for various Creality printers, among others.

Aluminum Heater Block
Silicone Sock
Allen key

Compatible with the following printers:

Creality CR-6 SE
CR-6 SE MAX
CR-10 Smart

Specifications

Material:	Aluminum	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR00914

£10.87

£9.06 Excl. 20% VAT

14 day delivery

Micro Swiss NG Direct Drive Extruder for Creality Ender 6

Zoom in

Description The Micro Swiss NG™ Direct Drive Extruder is a lightweight extruder for the Creality Ender 6. The design has the shortest TwinClad XT™ plated filament path currently on the market and has a Micro Swiss All Metal Hotend. The Bevel Gear system also provides a short filament path of even less than 41mm. The unique placement of the LDO Stepper motor enables a very compact overhanging design, which ensures an optimal printing experience for every user.

Not suitable for use in combination with the BL-Touch.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR00928
Manual:	Download

£113.95

£94.96 Excl. 20% VAT

14 day delivery

Micro Swiss NG Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus

Zoom in

Description The Micro Swiss NG™ Direct Drive Extruder is a lightweight extruder that fits perfectly on the Creality Ender 5, 5 Pro and 5 plus. The Bevel Gear system ensures that the TwinClad XT™ plated filament path is less than 41mm. The placement of the engine allows for a low overhang design. With the hardened steel Dual Gear feed and the Micro Swiss All Metal Hotend, this is an extruder that provides an optimal printing experience for every user.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR01059
Manual:	Download

Order now, we can ship this on Monday!

£113.95

£94.96 Excl. 20% VAT

In stock

Micro Swiss nozzle for Creality K1, K1 Max and CR-M4 Hotend 1.75mm x 0.40 mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite coating of nickel, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4 mm.

Compatible with the following printers:
	●	K1 (Original hotend)
	●	K1 Max (Original hotend)
	●	CR-M4 (Original hotend)

Specifications

Material:	Brass	Nozzle type:	-
Filament diameter:	1.75 mm	Nozzle coating:	twinclad XT
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DAR01178
Brand:	Micro Swiss

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

Order now, we can ship this on Monday!

£15.65

£13.04 Excl. 20% VAT

In stock

Micro Swiss nozzle for Creality K1, K1 Max and CR-M4 Hotend 1.75mm x 0.60 mm

Zoom in

Compatible with the following printers:
	●	K1 (Original hotend)
	●	K1 Max (Original hotend)
	●	CR-M4 (Original hotend)

Specifications

Material:	Brass	Nozzle type:	-
Filament diameter:	1.75 mm	Nozzle coating:	twinclad XT
Nozzle diameter:	0.6 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DAR01179
Brand:	Micro Swiss

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

Order now, we can ship this on Monday!

£14.65

£12.21 Excl. 20% VAT

In stock

Micro Swiss nozzle for Creality K1, K1 Max and CR-M4 Hotend 1.75mm x 0.80 mm

Zoom in

Compatible with the following printers:
	●	K1 (Original hotend)
	●	K1 Max (Original hotend)
	●	CR-M4 (Original hotend)

Specifications

Material:	Brass	Nozzle type:	-
Filament diameter:	1.75 mm	Nozzle coating:	twinclad XT
Nozzle diameter:	0.8 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DAR01180
Brand:	Micro Swiss

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

Order now, we can ship this on Monday!

£15.65

£13.04 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ CHT High Micro Swiss Flow Nozzle 1.75mm x 0.4mm

Zoom in

Description The Microswiss FlowTech CHT High Flow nozzle was created in collaboration between Microswiss and Bondtech. Thanks to the Bondtech CHT technology, a maximum flow rate of 50 mm³/s can be achieved. Because the molten filament passes through multiple chambers during heating, there is better adhesion between layers. There are also fewer gaps and weak points between the layers. This 0.4 mm brass FlowTech CHT nozzle is compatible with all FlowTech hotends and is suitable for filament with a diameter of 1.75mm.

Specifications

Filament diameter:	1.75 mm	Nozzle coating:	twinclad XT
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR01872
Nozzle type:

Nozzle diameter:

Please note: The delivery time for this item is currently unknown.

Order now, we can ship this on Monday!

£17.50

£14.58 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ CHT High Micro Swiss Flow Nozzle 1.75mm x 0.6mm

Zoom in

Description The Microswiss FlowTech CHT High Flow nozzle is the result of a collaboration between Microswiss and Bondtech. Thanks to the Bondtech CHT technology, a maximum flow rate of 50 mm³/s can be achieved. Because the molten filament passes through multiple chambers during heating, there is better adhesion between layers. There are also fewer gaps and weak points between the layers. This 0.6 mm brass FlowTech CHT nozzle is compatible with all FlowTech hotends and is suitable for filament with a diameter of 1.75mm.

Specifications

Filament diameter:	1.75 mm	Nozzle coating:	twinclad XT
Nozzle diameter:	0.6 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR01873
Nozzle type:

Nozzle diameter:

Order now, we can ship this on Monday!

£22.50

£18.75 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ CHT High Micro Swiss Flow Nozzle 1.75mm x 0.8mm

Zoom in

Description The Microswiss FlowTech CHT High Flow nozzle was created in collaboration between Microswiss and Bondtech. Thanks to the Bondtech CHT technology, a maximum flow rate of 50 mm³/s can be achieved. Because the molten filament passes through multiple chambers during heating, there is better adhesion between layers. There are also fewer gaps and weak points between the layers. This 0.8 mm brass FlowTech CHT nozzle is compatible with all FlowTech hotends and is suitable for filament with a diameter of 1.75mm.

Specifications

Filament diameter:	1.75 mm	Nozzle coating:	twinclad XT
Nozzle diameter:	0.8 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR01874
Nozzle type:

Nozzle diameter:

£22.50

£18.75 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ CHT High Micro Swiss Flow Nozzle 1.75mm x 1.00mm

Zoom in

Description The Microswiss FlowTech CHT High Flow nozzle was created in collaboration between Microswiss and Bondtech. Thanks to the Bondtech CHT technology, a maximum flow rate of 50 mm³/s can be achieved. Because the molten filament passes through multiple chambers during heating, there is better adhesion between layers. There are also fewer gaps and weak points between the layers. This 1.00 mm brass FlowTech CHT nozzle is compatible with all FlowTech hotends and is suitable for filament with a diameter of 1.75mm.

Specifications

Filament diameter:	1.75 mm	Nozzle coating:	twinclad XT
Nozzle diameter:	1 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR01875
Nozzle type:

Nozzle diameter:

Order now, we can ship this on Monday!

£22.50

£18.75 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max / K1C

Zoom in

Description This FlowTech hotend is part of a new generation of hotends from Microswiss. Thanks to the unique design, known hotend problems are solved and you can get started without any worries. The hotend is leak-free and the nozzle can be easily changed. The all-metal design is of high quality and lasts a long time. In addition, the maximum temperature is 300 ˚ C and most 3D filaments can be used without any problems. This hotend is suitable for the K1, K1 Max and K1C 3D printers from Creality.

Specifications

Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01876
Brand:	Micro Swiss

Order now, we can ship this on Monday!

£63.50

£52.92 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ Hotend for Creality CR-10 SE

Zoom in

Specifications

Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01877
Brand:	Micro Swiss

£63.50 (sold out)

£52.92 Excl. 20% VAT

Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 KE

Zoom in

Specifications

Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01878
Brand:	Micro Swiss

£63.50

£52.92 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 SE

Zoom in

Description Upgrade your 3D printer with this FlowTech hotend kit. This kit comes with a plug-and-play heater core and thermistor, so no additional firmware modifications are required. It also comes with a CR touch spacer and a custom part cooling fan duct. The all-metal design allows for printing with most filaments. The nozzle is leak-proof and easy to change. This hotend is compatible with the Ender 3 V3 SE 3D printer from Creality.

Specifications

Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01879
Brand:	Micro Swiss

Order now, we can ship this on Monday!

£63.50

£52.92 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 / Ender 3 V3 Plus

Zoom in

Description Upgrade your 3D printer with this FlowTech hotend kit. This kit comes with a plug-and-play heater core and thermistor. The hotend is leak-proof and the nozzle can be easily changed. The full metal design is of high quality and will last a long time. In addition, the maximum temperature is 300 ˚ C and most 3D filaments can be used without any problems. This hotend is suitable for the Ender 3 V3 and Ender 3 V3 Plus 3D printers from Creality.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR01880

Order now, we can ship this on Monday!

£66.50

£55.42 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ Hotend for ELEGOO Neptune 4 / 4 Pro

Zoom in

Description Upgrade your 3D printer with this FlowTech hotend kit. This kit comes with a plug-and-play heater core, thermistor and heatsink. The all-metal design is of high quality and will last a long time. In addition, the maximum temperature is 300 ˚ C and most 3D filaments can be used without any problems. This hotend is suitable for the Neptune 4 and Neptune 4 Pro 3D printers from Elegoo.

Specifications

Max temp:	300 °C	Brand:	Micro Swiss
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR01881

£68.10

£56.75 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ Hotend for ELEGOO Neptune 4 Plus / 4 Max

Zoom in

Description Upgrade your 3D printer with this FlowTech hotend kit. This kit comes with a plug-and-play heater core, thermistor and heatsink. The full metal design is of high quality and will last a long time. In addition, the maximum temperature is 300 ˚ C and most 3D filaments can be used without any problems. This hotend is suitable for the Neptune 4 Plus and the Neptune 4 Max from Elegoo.

Specifications

Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01882
Brand:	Micro Swiss

Order now, we can ship this on Monday!

£66.30

£55.25 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ CHT High Flow - CM2™ Nozzle - 0.4 mm

Zoom in

Description The Micro Swiss CHT High Flow CM2 nozzle is ideal for a wide variety of projects. This 0.4mm nozzle is made of a nickel-plated chromium-zirconium-copper alloy, giving it increased strength when printing at high temperatures. The nozzle tip is made of hardened M2 high-speed steel and has a special WS2 nanocoating. Thanks to Bondtech CHT technology, the flow rate can reach up to 50 mm³/s. Furthermore, the filament is split and heated in multiple chambers, resulting in a more uniform layer buildup.

Specifications

Filament diameter:	1.75 mm	Nozzle coating:
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR02126

Nozzle diameter:

£32.57

£27.14 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ CHT High Flow - CM2™ Nozzle - 0.6 mm

Zoom in

Description The Micro Swiss CHT High Flow CM2 nozzle is ideal for a wide variety of projects. This 0.6mm nozzle is made of a nickel-plated chromium-zirconium-copper alloy, giving it increased strength when printing at high temperatures. The nozzle tip is made of hardened M2 high-speed steel and has a special WS2 nanocoating. Thanks to Bondtech CHT technology, the flow rate can reach up to 50 mm³/s. Furthermore, the filament is split and heated in multiple chambers, resulting in a more uniform layer buildup.

Specifications