3D Printers, Filament & Tools | Best prices UK

Compatible with the following parts:

E3D - Super Volcano Block & Sock

E3D - Super Volcano Kit 12V 1,75mm

E3D - Super Volcano MultiKit 24V 1,75mm

E3D - Super Volcano Kit 24V 1,75mm

Description This original ED3 nozzle (3mm) pro pack is suitable for the E3D-V6 hotend series.
The pro pack contains 6 nozzles and an E3D nozzle wrench. The nozzles are suitable for 3mm filament and have a marking that corresponds to the nozzle opening.

The set contains the following nozzle types:

Brass 0.15mm
Brass 0.80mm
Copper 0.25mm
Copper 0.40mm
Hardened steel 0.40mm
Hardened steel 0.60mm

Specifications

Screwthread type:	M6	Hazard class:	n/a
Brand:	E3D	Our item no:	DED00152

£74.50

£62.08 Excl. 20% VAT

Backorder - due January

E3D V6 titanium heatbreak 1.75mm

Zoom in

Description The E3D V6 titanium heatbreak for 1.75mm filament is compatible with the E3D V6 hotends. Due to the very smooth internal structure of the heatbreak, there is less friction with the filament during printing. The titanium has a lower thermal conductivity and is very strong.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	E3D	Our item no:	DED00154

Order now, we can ship this on Monday!

£18.95

£15.79 Excl. 20% VAT

In stock

E3D PT100 sensor cartridge

Zoom in

Description This E3D PT100 sensor cartridge has a 10cm cable with a molex connector. This sensor comes with a molex to dupont cable of 80cm. With an E3D PT100 temperature sensor you can very precisely measure high temperatures up to 400°C. The cartridge has a diameter of 3mm and a length of 15.5mm, making it suitable for use in the E3D V6, Chimera, Lite6 and the Kraken if a heater block is used that is suitable for a sensor cartridge.

The E3D PT100 sensor is not the same as a thermistor. If your electronics are not suitable for the PT100 sensor, you can use the E3D PT100 Amplifier Board .

Specifications

Cable length:	80 cm	Brand:	E3D
Cartridge length:	15.5 mm	Hazard class:	n/a
Cartridge diameter:	3 mm	Our item no:	DED00155

Order now, we can ship this on Monday!

£19.50

£16.25 Excl. 20% VAT

In stock

E3D PT100 Amplifier Board

Zoom in

Description This E3D PT100 Amplifier Board allows you to use the E3D PT100 sensor on your 3D Printer electronics. The board amplifies the signal from the PT100 sensor and converts it into a readable signal for your electronics. For correct operation in the Marlin firmware, specify the temperature sensor type 20.

The official E3D documentation can be found here.

Specifications

Dimensions:	38 x 28 mm	Hazard class:	n/a
Thickness:	1.5 mm	Our item no:	DED00156
Brand:	E3D

Order now, we can ship this on Monday!

£23.25

£19.38 Excl. 20% VAT

In stock

E3D PT100 upgrade kit

Zoom in

Description This E3D PT100 upgrade kit is ideal if you want to print special materials that have to be printed at high temperatures. The PT100 sensor from E3D can accurately read temperatures up to 400°C. This set also includes the E3D PT100 Amplifier Board to connect the E3D PT100 sensor to your existing printer electronics.

To use this set, you need to change the temperature sensor type to type 20 in the Marlin firmware.

Specifications

Brand:	E3D	Our item no:	DED00157
Hazard class:	n/a

£42.99

£35.83 Excl. 20% VAT

Backorder - due January

E3D high precision ceramic heater cartridge | 12V, 30W

Zoom in

Description This E3D high precision heater cartride of 12V and 30W is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm, making it compatible with many hotends. The heater cartridge is equipped with a molex microfit 3.0 connector and has a total cable length of 100cm.

Specifications

Power rating:	30 W	Cartridge diameter:	6 mm
Colour:	Green	Brand:	E3D
Voltage:	12 v	Hazard class:	n/a
Cable length:	100 cm	Our item no:	DED00158
Cartridge length:	20 mm

Order now, we can ship this on Monday!

£21.50

£17.92 Excl. 20% VAT

In stock

E3D V6 Lite6 direct hotend kit | 12V 1.75mm

Zoom in

Description This set contains the following products:
- E3D Lite - Heatsink 1.75mm
- E3D V6 - Heater block including spare fixings (cartridge version)
- E3D V6 - Brass nozzle - 0.40mm /1.75mm
- E3D Axial fan 30 x 30 x 10mm (12V)
- E3D V6 - Red injection molded fan duct
- E3D V6 - Embedded Bowden plug fitting (1.75mm)
- E3D Thermistor cartridge + cable
- E3D Ceramic heater cartridge 12V/30W (100cm)
- E3D V6 - Blue silicone sock

Specifications

Max operating temp:	245 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00160
Brand:	E3D

£36.50 (sold out)

£30.42 Excl. 20% VAT

E3D Super Volcano ceramic heater cartridge | 12V | 80W, 100cm

Zoom in

Description With this original E3D 12V ceramic heating element for the Super Volcano you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hotend. The cable length is 100cm.

NB! This heater cartridge can use a maximum of 8A. Do not connect it directly to your electronics. Use the supplied MOSFET module.

For connection, please refer to the E3D Super Volcano Assembly.

Specifications

Power rating:	80 W	Cartridge length:	47.5 mm
Outer diameter:	6 mm	Max current:	8 A
Colour:	Black	Brand:	E3D
Voltage:	12 v	Hazard class:	n/a
Cable length:	100 cm	Our item no:	DED00161

Order now, we can ship this on Monday!

£18.95

£15.79 Excl. 20% VAT

In stock

E3D Super Volcano ceramic heater cartridge | 24V | 80W, 100cm

Zoom in

Description With this original E3D 24V ceramic heating element for the Super Volcano you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hotend. The cable length is 100cm.

NB! First check whether your electronics can control this heater cartridge. The heater cartridge uses a maximum of 3.9A. If your electronics cannot drive the 3.9A, you can use an External MOSFET module.

For connection, please refer to the E3D Super Volcano Assembly.

Specifications

Power rating:	80 W	Max current:	3.9 A
Voltage:	24 v	Brand:	E3D
Cable length:	100 cm	Hazard class:	n/a
Cartridge length:	47.5 mm	Our item no:	DED00162
Cartridge diameter:	6 mm

Order now, we can ship this on Monday!

£18.95

£15.79 Excl. 20% VAT

In stock

E3D Super Volcano block & sock

Zoom in

Description The E3D Super Volcano block is made of nickel-plated copper and has an 11x higher volume flow rate than the standard E3D V6 hotend. The Super Volcano is part of the E3D ecosystem allowing it to be used with the V6 or Kraken heatbreaks and our Lite6 integrated heatsink and heatbreak.

Because the Super Volcano blocks are designed for the special 80W heating elements, this gives an ultimate performance at high print temperatures of up to 300°C. The supplied fibreglass sleeving replaces the commonly used silicone sock.

This set contains the following original parts:

Super Volcano Block
Fibreglass sleeving
Fasteners

Specifications

Material:	Copper	Hazard class:	n/a
Brand:	E3D	Our item no:	DED00163

£90.00

£75.00 Excl. 20% VAT

Backorder - due January

E3D Super Volcano brass nozzle, 1.75mm x 0.60mm

Zoom in

Description This E3D Super Volcano nozzle is ideal for printing large layer heights. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Specifications

Material:	Brass	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	0.6 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00164

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£11.35

£9.46 Excl. 20% VAT

In stock

E3D Super Volcano brass nozzle, 1.75mm x 0.80mm

Zoom in

Description This E3D Super Volcano nozzle is ideal for printing tall layers. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and an opening of 0.80mm.

Specifications

Material:	Brass	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	0.8 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00165

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£11.35

£9.46 Excl. 20% VAT

In stock

E3D Super Volcano brass nozzle, 1.75mm x 1.20mm

Zoom in

Description This E3D Super Volcano nozzle is ideal for printing large layer heights. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.2mm.

Specifications

Material:	Brass	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	1.2 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00167

Nozzle diameter:

1.2 mm

1.4 mm

Order now, we can ship this on Monday!

£11.35

£9.46 Excl. 20% VAT

In stock

E3D Super Volcano brass nozzle, 1.75mm x 1.40mm

Zoom in

Description This E3D Super Volcano nozzle is ideal for printing large layer heights. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.4mm.

Specifications

Material:	Brass	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	1.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00168

Nozzle diameter:

1.2 mm

1.4 mm

Order now, we can ship this on Monday!

£11.35

£9.46 Excl. 20% VAT

In stock

E3D Super Volcano brass nozzle, 2.85mm x 0.60mm

Zoom in

Description This E3D Super Volcano nozzle is ideal for printing large layer heights. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.6mm.

Specifications

Material:	Brass	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	0.6 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00169

Nozzle diameter:

£12.75

£10.63 Excl. 20% VAT

Backorder - due January

E3D Super Volcano brass nozzle, 2.85mm x 1.20mm

Zoom in

Description This E3D Super Volcano nozzle is ideal for printing large layer heights. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 1.2mm.

Specifications

Material:	Brass	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	1.2 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00172

Nozzle diameter:

£12.75

£10.63 Excl. 20% VAT

Backorder - due January

E3D Super Volcano hardened steel nozzle, 1.75mm x 0.80mm

Zoom in

Description The hardened steel E3D Super Volcano nozzle is extremely suitable for printing special filaments such as carbon, metal, wood and glow-in-the-dark. This nozzle achieves very high throughput and printing speeds thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and an opening of 0.80mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	0.8 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00175

Nozzle diameter:

0.8 mm

1.2 mm

1.4 mm

Order now, we can ship this on Monday!

£29.50

£24.58 Excl. 20% VAT

In stock

E3D Super Volcano hardened steel nozzle, 1.75mm x 1.20mm

Zoom in

Description The hardened steel E3D Super Volcano nozzle is extremely suitable for printing special filaments such as carbon, metal, wood and glow-in-the-dark. This nozzle achieves very high throughput and printing speeds thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.20mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	1.2 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00177

Nozzle diameter:

0.8 mm

1.2 mm

1.4 mm

Order now, we can ship this on Monday!

£29.50

£24.58 Excl. 20% VAT

In stock

E3D Super Volcano hardened steel nozzle, 1.75mm x 1.40mm

Zoom in

Description The hardened steel E3D Super Volcano nozzle is extremely suitable for printing special filaments such as carbon, metal, wood and glow-in-the-dark. This nozzle achieves very high throughput and printing speeds thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.40mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	1.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00178

Nozzle diameter:

0.8 mm

1.2 mm

1.4 mm

Order now, we can ship this on Monday!

£29.50

£24.58 Excl. 20% VAT

In stock

E3D Super Volcano hardened steel nozzle, 2.85mm x 1.00mm

Zoom in

Description The hardened steel E3D Super Volcano nozzle is extremely suitable for printing special filaments such as carbon, metal, wood and glow-in-the-dark. This nozzle achieves very high throughput and printing speeds thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 1.00mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	1 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00181

Nozzle diameter:

1 mm

1.2 mm

1.4 mm

£29.50

£24.58 Excl. 20% VAT

Backorder - due January

E3D Super Volcano hardened steel nozzle, 2.85mm x 1.20mm

Zoom in

Description The hardened steel E3D Super Volcano nozzle is extremely suitable for printing special filaments such as carbon, metal, wood and glow-in-the-dark. This nozzle achieves very high throughput and printing speeds thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 1.20mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	1.2 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00182

Nozzle diameter:

1 mm

1.2 mm

1.4 mm

£29.50

£24.58 Excl. 20% VAT

Backorder - due January

E3D Super Volcano hardened steel nozzle, 2.85mm x 1.40mm

Zoom in

Description The hardened steel E3D Super Volcano nozzle is extremely suitable for printing special filaments such as carbon, metal, wood and glow-in-the-dark. This nozzle achieves very high throughput and printing speeds thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 1.40mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	1.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00183

Nozzle diameter:

1 mm

1.2 mm

1.4 mm

£29.50

£24.58 Excl. 20% VAT

Backorder - due January

E3D Super Volcano copper nozzle, 1.75mm x 1.40mm

Zoom in

Description This E3D Super Volcano nozzle is ideal for printing tall layers. The nozzle is made of copper alloy for optimum thermal properties. Copper will conduct heat 3x better than brass. The alloy makes it possible to heat even above 500°C without softening the metal of the nozzle.

The high-quality copper nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.40mm.

Specifications

Material:	Copper	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	1.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00188

Nozzle diameter:

0.8 mm

1.4 mm

Order now, we can ship this on Monday!

£29.50

£24.58 Excl. 20% VAT

In stock

E3D Super Volcano copper nozzle, 2.85mm x 1.00mm

Zoom in

Description This E3D Super Volcano nozzle is ideal for printing tall layers. The nozzle is made of copper alloy for optimum thermal properties. Copper will conduct heat 3x better than brass. The alloy makes it possible to heat even above 500°C without softening the metal of the nozzle.

The high-quality copper nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 1.00mm.

Specifications

Material:	Copper	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	nickel plated
Nozzle diameter:	1 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00190

Nozzle diameter:

£29.50

£24.58 Excl. 20% VAT

Backorder - due January

Quantity	Product
No products
Total: £0.00