Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 01270 433 123
E: info@123-3D.co.uk
Free delivery over £30

Lots of popular payment options!

Official Prusa dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Home
E3D

E3D

49 - 72 of 310

E3D Revo High Flow nozzle 1.75mm x 1.40mm

E3D Revo High Flow nozzle 1.75mm x 1.40mm DAR01176

Description With the E3D Revo High Flow 1.75mm x 1.40 mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Dimensions:	41.1 mm	Colour:	Orange
Max temp:	300 °C	Brand:	E3D
Material:	Brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	1.4 mm	Our item no:	DAR01176
Screwthread type:	-

Nozzle diameter:

£47.50

£39.58 Excl. 20% VAT

14 day delivery

E3D Hemera XS Bowden Coldside

E3D Hemera XS Bowden Coldside DAR01727

Description The Hemera XS Bowden Coldside is the ideal extruder to use in combination with other E3D products such as high flow hotends and nozzles. Because the Hemera XS is compact, it is very suitable for smaller 3D printers. Thanks to the mounting system, accessories can easily be attached to this extruder. The personalized stepper motor makes it possible to move back and forth faster, which reduces the chance of ghosting. With this extruder you can print a wide range of materials, including flexible and abrasive materials. The Hemera XS works with Revo nozzles and V6 nozzles with a Hemera heatbreak. In the event of a blockage in the nozzle, the drive mechanism of the Hemera XS will pause, so that you can quickly continue afterwards. The built-in PTC resistor offers better protection against hazards associated with high temperatures. This Hemera XS extruder is suitable for a Bowden setup.

This kit contains:
1 x Hemera XS Extruder
1 x Hemera fixings kit
1 x 40 x 40 x 10 mm 12 V or 24 V fan
1 x Extension cable kit

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	E3D	Our item no:	DAR01727

£116.51 (sold out)

£97.09 Excl. 20% VAT

E3D Hemera XS Direct Coldside, 12 Volt

E3D Hemera XS Direct Coldside, 12 Volt DAR01728

Description The Hemera XS Direct Coldside 12 V is the ideal extruder to use in combination with other E3D products such as high flow hotends and nozzles. Because the Hemera XS is compact, it is very suitable for smaller 3D printers. Thanks to the mounting system, accessories can easily be attached to this extruder. The personalized stepper motor makes it possible to move back and forth faster, which reduces the chance of ghosting. With this extruder you can print a wide range of materials, including flexible and abrasive materials. The Hemera XS works with Revo nozzles and V6 nozzles with a Hemera heatbreak. In the event of a blockage in the nozzle, the drive mechanism of the Hemera XS will pause, so that you can quickly continue. The built-in PTC resistor offers better protection against hazards associated with high temperatures. This Hemera XS extruder is suitable for a direct drive setup and works with 12 V.

This kit contains:
1 x Hemera XS Extruder
1 x Hemera fixings kit
1 x 40 x 40 x 10 mm 12 V or 24 V fan
1 x Extension cable kit

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	12 v	Our item no:	DAR01728
Brand:	E3D

£116.10 (sold out)

£96.75 Excl. 20% VAT

E3D Hemera XS Direct Coldside, 24 Volt

E3D Hemera XS Direct Coldside, 24 Volt DAR01729

Description The Hemera XS Direct Coldside 24 V is the ideal extruder to use in combination with other E3D products such as high flow hotends and nozzles. Because the Hemera XS is compact, it is very suitable for smaller 3D printers. Thanks to the mounting system, accessories can easily be attached to this extruder. The personalized stepper motor makes it possible to move back and forth faster, which reduces the chance of ghosting. With this extruder you can print a wide range of materials, including flexible and abrasive materials. The Hemera XS works with Revo nozzles and V6 nozzles with a Hemera heatbreak. In the event of a blockage in the nozzle, the drive mechanism of the Hemera XS will pause, so that you can quickly continue. The built-in PTC resistor offers better protection against hazards associated with high temperatures. This Hemera XS extruder is suitable for a direct drive setup and works with 24 V.

This kit contains:
1 x Hemera XS Extruder
1 x Hemera fixings kit
1 x 40 x 40 x 10 mm 12 V or 24 V fan
1 x Extension cable kit

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01729
Brand:	E3D

£116.10 (sold out)

£96.75 Excl. 20% VAT

E3D Revo Creality Coldside

E3D Revo Creality Coldside DAR01730

Description This Revo Creality Coldside kit allows you to change your nozzle in 60 seconds and without tools. The kit contains everything you need to install your new setup. This kit is suitable for the Creality Ender 3, Ender 3S, Ender 3 Pro, Ender v2, Ender 5, Ender 5 Pro, Ender 5 Plus, Ender 6, Ender 2 Pro, CR10, CR10S, CR10 S4, CR10 S5 & CR20 Mini.

This kit contains:
1 x Creality heatsink
1 x 5 pack butt splice connectors
1 x Heater extension
1 x Thermistor extension

Please note: Hotsides are NOT included

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	E3D	Our item no:	DAR01730

£32.87

£27.39 Excl. 20% VAT

14 day delivery

E3D Revo Creality Sprite Coldside

E3D Revo Creality Sprite Coldside DAR01731

Description With this Revo Creality Sprite Coldside kit you can change your nozzle within 60 seconds and without tools. This product comes with a CR touch spacer and an optimized part cooling fan shroud. The kit is suitable for the Creality 3 S1.

This kit contains:
2 x M2 x 6 Self tapping screws
2 x M3x12 Socket head screws
2x M3x4 Button head screws
1 x Crealty Sprite Revo Adapter
1 x Creality Sprite Fan Duct
1 x Z-probe spacer

Please note: Hotsides are NOT included

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	E3D	Our item no:	DAR01731

£12.07

£10.06 Excl. 20% VAT

14 day delivery

E3D Revo LGX Coldside, Direct

E3D Revo LGX Coldside, Direct DAR01732

Description Ensure smooth and consistent extrusion with the Revo LGX Coldside. The combination of the Revo Micro and the LGX extruder from Bondtech makes it easy to create high-quality 3D prints. The compact and lightweight design can be used with various types of filament and has an excellent grip on the filament. The LGX extruder delivers the filament smoothly, which reduces the chance of clogging. In addition, this kit prevents heat creep, even during long 3D printing sessions.

This kit contains:
1 x LGX Extruder
1 x 5v Fan
1 x Bowden clip
1 x Metal Bowden collet
1 x Heater cable
1 x Sensor cable
1 x Revo Micro Heatsink
1 x 5v Regulator board
1 x fan cable
1 x LGX adapter
1 x Bowden tube

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	E3D	Our item no:	DAR01732

£151.00 (sold out)

£125.83 Excl. 20% VAT

E3D Roto Coldside Packed Inc. Cables and Fan

E3D Roto Coldside Packed Inc. Cables and Fan DAR01733

1
0

Description The Roto Coldside Packed including cables and fan is a lightweight, powerful extruder that is easy to install. The design offers enough extrusion power to be used in combination with the Revo High Flow nozzles. In addition, you can easily change the nozzle and filament with just one hand. The Roto Coldside has a unique 3D printed metal heatsink, which is optimized to prevent heat creep. This product comes with cables and fan. The Roto Coldside weighs 140g and is suitable for filament with a diameter of 1.75mm.

This kit contains:
1 x LGX Extruder
1 x 5v fan
1 x Bowden clip
1 x Metal Bowden collet
1 x Heater cable
1 x Sensor cable
1 x Revo Micro Heatsink
1 x 5v Regulator board
1 x fan cable
1 x LGX adapter
1 x Bowden tube

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01733
Brand:	E3D

£134.82 (sold out)

£112.35 Excl. 20% VAT

E3D Roto Coldside with Bowdapter and Cables

E3D Roto Coldside with Bowdapter and Cables DAR01734

1
0

Description The Roto Coldside Packed including cables and fan is a lightweight, powerful extruder that is easy to install. The design offers enough extrusion power to be used in combination with the Revo High Flow nozzles. In addition, you can easily change the nozzle and filament with just one hand. The Roto Coldside has a unique 3D printed metal heatsink, which is optimized to prevent heat creep. This product comes with a bowdaptor and cables. The Roto Coldside weighs 140g and is suitable for filament with a diameter of 1.75mm.

This kit contains:
1 x Revo Motor with cable
1 x Fixings kit
1 x Bowdaptor
2 x Heatsink washers
1 x Bowden tube

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01734
Brand:	E3D

£134.82 (sold out)

£112.35 Excl. 20% VAT

E3D Roto Coldside Packed Inc. Sensors, Cables and Fan

E3D Roto Coldside Packed Inc. Sensors, Cables and Fan DAR01735

1
0

Description The Roto Coldside Packed including cables and fan is a lightweight, powerful extruder that is easy to install. The design offers enough extrusion power to be used in combination with the Revo High Flow nozzles. In addition, you can easily change the nozzle and filament with just one hand. The Roto Coldside has a unique 3D printed metal heatsink, which is optimized to prevent heat creep. This product comes with sensors, cables and a fan. The Roto Coldside weighs 140g and is suitable for filament with a diameter of 1.75mm.

This kit contains:
1 x Revo Motor with cable
1 x 3 wire fan with cable
1 x Fixings kit
1 x Roto coldside assembly
1 x Bowden tube
1 x Heatsink thermistor with cable
1 x Filament sensor with cable

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01735
Brand:	E3D

£179.76 (sold out)

£149.80 Excl. 20% VAT

E3D Revo Six 12 Volt Coldside

E3D Revo Six 12 Volt Coldside DAR01736

Description Upgrade your V6 setup with this coldside kit, allowing you to change your nozzle in under 60 seconds without tools. This kit also includes a replacement Revo heatsink and everything you need to mount this setup on your 3D printer. This kit uses 12V.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	12 v	Our item no:	DAR01736
Brand:	E3D

£36.20 (sold out)

£30.17 Excl. 20% VAT

E3D Revo Six 24 Volt Coldside

E3D Revo Six 24 Volt Coldside DAR01737

Description Upgrade your V6 setup with this coldside kit, allowing you to change your nozzle in under 60 seconds without tools. This kit also includes a replacement Revo heatsink and everything you need to mount this setup on your 3D printer. This kit uses 12V.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01737
Brand:	E3D

£36.20

£30.17 Excl. 20% VAT

14 day delivery

E3D Revo High Flow Hotside, Fully Loaded, 1.75mm 24 Volt 60W

E3D Revo High Flow Hotside, Fully Loaded, 1.75mm 24 Volt 60W DAR01739

Description Start high-flow 3D printing in just 30 seconds with this Revo High Flow Hotside. This hotside has the same form factor as the standard E3D Revo, so you don't have to change anything to your setup. The 60W power provides extra power for printing with filaments that require a higher temperature. This product uses 24V and has a diameter of 0.4mm. It is suitable for filament with a diameter of 1.75mm.

This kit contains:
1 x 60W 24V HeaterCore with Spring & Sock
1 x 0.60mm Revo High Flow Nozzle & Sock
1 x 0.80mm Revo High Flow Nozzle & Sock
1 x 1.00mm Revo High Flow Nozzle & Sock
1 x 1.20mm Revo High Flow Nozzle & Sock

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01739
Brand:	E3D

£178.93 (sold out)

£149.11 Excl. 20% VAT

E3D Revo 12 Volt Starter Hotside Kit

E3D Revo 12 Volt Starter Hotside Kit DAR01740

Description This Revo Starter Hotside Kit is ideal if you mainly print with PLA, PETG and ASA. The two brass nozzles and the 40 W heater core offer you the possibility to 3D print with two common nozzle sizes. Within 60 seconds you can change your nozzle without using tools. This product works with 12 V.

This kit contains:
1 x 40W HeaterCore (12V & 104NT)
1 x 0.6mm Brass Revo Nozzle
1 x 0.4mm Brass Revo Nozzle

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	12 v	Our item no:	DAR01740
Brand:	E3D

£49.52 (sold out)

£41.27 Excl. 20% VAT

E3D Revo 24 Volt Starter Hotside Kit

E3D Revo 24 Volt Starter Hotside Kit DAR01741

Description This Revo Starter Hotside Kit is ideal if you mainly print with PLA, PETG and ASA. The two brass nozzles and the 40 W heater core offer you the possibility to 3D print with two common nozzle sizes. Within 60 seconds you can change your nozzle without using tools. This product works with 24 V.

This kit contains:
1 x 40W HeaterCore (24V & 104NT)
1 x 0.6mm Brass Revo Nozzle
1 x 0.4mm Brass Revo Nozzle

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01741
Brand:	E3D

Order now, we can ship this today!

£37.80

£31.50 Excl. 20% VAT

In stock

E3D Revo 12 Volt Creality Starter Hotside Kit

E3D Revo 12 Volt Creality Starter Hotside Kit DAR01742

Description This Revo Starter Hotside Kit is ideal if you mainly print with PLA, PETG and ASA. The two brass nozzles and the 40 W heater core offer you the possibility to 3D print with two common nozzle sizes. Within 60 seconds you can change your nozzle without using tools. This product works with 12 V.

Please note: The Creality Starter Hotside Kit includes a HeaterCore that is specific to Creality. This can NOT be used with other 3D printing brands.

This kit contains:
1 x 40W HeaterCore (12V & 100k)
1 x 0.6mm Brass Revo Nozzle
1 x 0.4mm Brass Revo Nozzle

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	12 v	Our item no:	DAR01742
Brand:	E3D

£49.52 (sold out)

£41.27 Excl. 20% VAT

E3D Revo 24 Volt Creality Starter Hotside Kit

E3D Revo 24 Volt Creality Starter Hotside Kit DAR01743

Description This Revo Starter Hotside Kit is ideal if you mainly print with PLA, PETG and ASA. The two brass nozzles and the 40 W heater core offer you the possibility to 3D print with two common nozzle sizes. Within 60 seconds you can change your nozzle without using tools. This product works with 24 V.

Please note: The Creality Starter Hotside Kit includes a HeaterCore that is specific to Creality. This can NOT be used with other 3D printing brands.

This kit contains:
1 x 40W HeaterCore (24V & 100k)
1 x 0.6mm Brass Revo Nozzle
1 x 0.4mm Brass Revo Nozzle

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01743
Brand:	E3D

£49.52 (sold out)

£41.27 Excl. 20% VAT

E3D Revo 24 Volt Creality Sprite Starter Hotside Kit

E3D Revo 24 Volt Creality Sprite Starter Hotside Kit DAR01744

Description This Revo Starter Hotside Kit is ideal if you mainly print with PLA, PETG and ASA. The two brass nozzles and the 40 W heater core offer you the possibility to 3D print with two common nozzle sizes. Within 60 seconds you can change your nozzle without using tools. This product works with 24 V.

Please note: The Creality Starter Hotside Kit includes a HeaterCore that is specific to Creality. This can NOT be used with other 3D printing brands.

This kit contains:
1 x 40W HeaterCore (24V & 100k)
1 x 0.6mm Brass Revo Nozzle
1 x 0.4mm Brass Revo Nozzle

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01744
Brand:	E3D

£49.52 (sold out)

£41.27 Excl. 20% VAT

E3D Revo 24 Volt PT100 Genius Metal Hotside Kit

E3D Revo 24 Volt PT100 Genius Metal Hotside Kit DAR01745

Description Discover new possibilities with the PT100 Genius Metal Hotside kit from Revo. This kit allows you to print with almost all filaments on the market and reaches temperatures of up to 400 ˚ C. Thanks to the 0.4 mm Revo DiamondBack nozzle you can also print filaments with added metal or ceramic particles. The 60 W HeaterCore and the High Flow nozzle allow you to easily print high flow. The kit also comes with a 0.25 mm nozzle for delicate prints and a non-planar nozzle. This product works with 24 V.

This kit contains:
1 x 0.40mm ObXidian Nozzle
1 x 0.40mm Non-Planar Nozzle
1 x 0.60mm High Temp Abrasive (HT-A) Nozzle
1 x 0.60mm HF ObXidian Nozzle
1 x 0.40mm DiamondBack
1 x 60W HeaterCore
1 x High-Temp HeaterBlock
1 x High Precision Heater Cartridge
1 x 0.25mm Brass Nozzle
1 x Fully Loaded Sock Pack

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01745
Brand:	E3D

£374.09 (sold out)

£311.74 Excl. 20% VAT

E3D Revo 24 Volt PT1000 Genius Metal Hotside Kit

E3D Revo 24 Volt PT1000 Genius Metal Hotside Kit DAR01746

Description Discover new possibilities with the PT100 Genius Metal Hotside kit from Revo. This kit allows you to print with almost all filaments on the market and reaches temperatures of up to 400 ˚ C. Thanks to the 0.4 mm Revo DiamondBack nozzle you can also print filaments with added metal or ceramic particles. The 60 W HeaterCore and the High Flow nozzle allow you to easily print high flow. The kit also comes with a 0.25 mm nozzle for delicate prints and a non-planar nozzle. This product works with 24 V.

This kit contains:
1 x 0.40mm ObXidian Nozzle
1 x 0.40mm Non-Planar Nozzle
1 x 0.60mm High Temp Abrasive (HT-A) Nozzle
1 x 0.60mm HF ObXidian Nozzle
1 x 0.40mm DiamondBack
1 x 60W HeaterCore
1 x High-Temp HeaterBlock
1 x High Precision Heater Cartridge
1 x 0.25mm Brass Nozzle
1 x Fully Loaded Sock Pack

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01746
Brand:	E3D

£315.84 (sold out)

£263.20 Excl. 20% VAT

E3D Revo 24 Volt PT100 Genius Hotside Kit

E3D Revo 24 Volt PT100 Genius Hotside Kit DAR01747

Description Push your boundaries with the PT100 Genius Metal Hotside kit from Revo. This kit gives you the freedom to print with almost any filament on the market and reaches high temperatures of up to 400 ˚ C. This kit also comes with a 0.25 mm nozzle for delicate prints and a non-planar nozzle. Thanks to the 60 W HeaterCore and High Flow nozzle you can print high flow. This product works with 24 V.

This kit contains:
1 x 0.40mm ObXidian Nozzle
1 x 0.40mm Non-Planar Nozzle
1 x 0.60mm High Temp Abrasive (HT-A) Nozzle
1 x 0.60mm High Flow ObXidian Nozzle
1 x 60W HeaterCore
1 x High-Temp HeaterBlock
1 x High Precision Heater Cartridge
1 x 0.25mm Brass Nozzle
1 x Fully Loaded Sock Pack

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01747
Brand:	E3D

£232.61 (sold out)

£193.84 Excl. 20% VAT

E3D Revo 24 Volt PT1000 Genius Hotside Kit

E3D Revo 24 Volt PT1000 Genius Hotside Kit DAR01748

Description Push your boundaries with the PT1000 Genius Metal Hotside kit from Revo. This kit gives you the freedom to print with almost any filament on the market and reaches high temperatures of up to 400 ˚ C. This kit also comes with a 0.25 mm nozzle for delicate prints and a non-planar nozzle. Thanks to the 60 W HeaterCore and High Flow nozzle you can print high flow. This product works with 24 V.

This kit contains:
1 x 0.40mm ObXidian Nozzle
1 x 0.40mm Non-Planar Nozzle
1 x 0.60mm High Temp Abrasive (HT-A) Nozzle
1 x 0.60mm High Flow ObXidian Nozzle
1 x 60W HeaterCore
1 x High-Temp HeaterBlock
1 x High Precision Heater Cartridge
1 x 0.25mm Brass Nozzle
1 x Fully Loaded Sock Pack

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01748
Brand:	E3D

£207.65 (sold out)

£173.04 Excl. 20% VAT

E3D Revo 24 Volt High Flow Hotside Kit

E3D Revo 24 Volt High Flow Hotside Kit DAR01749

Description Reach top speeds with this High Flow Hotside kit from Revo. The special high flow technology ensures an improved flow rate of up to 70%. This hotside kit has a 60 W HeaterCore and brass high flow nozzles. This product works with 24 V.

This kit contains:
1 x 0.4mm High Flow Brass Nozzle
1 x 0.6mm High Flow Brass Nozzle
1 x 60W HeaterCore
1 x Fully-Loaded Sock Pack
1 x 0.4mm Brass Nozzle

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01749
Brand:	E3D

Order now, we can ship this today!

£118.00

£98.33 Excl. 20% VAT

In stock

E3D Revo 24 Volt High Flow X Hotside Kit

E3D Revo 24 Volt High Flow X Hotside Kit DAR01750

Description Reach top speeds with this High Flow X Hotside kit from Revo. Thanks to the high flow technology, the flow rate is improved by up to 55%. In addition, this hotside kit has a 60 W HeaterCore and robust ObXidian high flow nozzles. This also allows you to print high flow with abrasive materials, such as filaments reinforced with glass or carbon particles. This product works with 24 V.

This kit contains:
1 x 0.4mm HF ObXidian Nozzle
1 x 0.6mm HF ObXidian Nozzle
1 x 60W HeaterCore
1 x Fully-Loaded Sock Pack
1 x 0.4mm Brass Nozzle

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01750
Brand:	E3D

Order now, we can ship this today!

£155.50

£129.58 Excl. 20% VAT

In stock

Quantity	Product
No products
Total: £0.00

© 2025 - 123-3d.co.uk