Prusa CORE One

Prusa CORE One Conversion kit contains all parts you need to transform your Original Prusa MK4S into the fully enclosed CoreXY 3D printer, the Prusa CORE One. This kit is compatible with the MK4S only!

The silver PSU is not compatible with the conversion kit.

Transform your Original Prusa MK4S into the brand new, fully enclosed CoreXY 3D printer and upgrade your printing experience. Once you’re finished with the assembly, your new printer is going to be not only faster, but it will also take up less space, print larger models and tackle even demanding filaments like PCCF or Nylon without warping. In the Conversion Kit, you will find everything you need to perform the entire process and end up with the Prusa CORE One without any compromise.

The Prusa CORE One utilizes many proven parts from the Original Prusa MK4S. This is why it is possible to convert your existing 3D printer into the new Prusa CORE One. You can easily reuse your current print sheets, hotends, nozzles, and many other parts.

This upgrade is for the newer version of xLCD.

The Prusa Nozzle ObXidian is a high-quality nozzle designed specifically for Nextruder. It is made from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly suitable for printing with abrasive materials like carbon fiber, as they maintain their hardness even at higher temperatures, delivering excellent performance and extending the lifespan of your nozzle.

This product includes:

• 0.6mm Prusa Nozzle ObXidian (1x)

The Prusa Nozzle ObXidian is a high-quality nozzle designed specifically for Nextruder. It is made from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly suitable for printing with abrasive materials like carbon fiber, as they maintain their hardness even at higher temperatures, delivering excellent performance and extending the lifespan of your nozzle.

This product includes:

• 0.4mm Prusa Nozzle ObXidian (1x)

• 0.6mm Prusa Nozzle Brass x1

• 0,.4mm Prusa Nozzle Brass x1

The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).

Polycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.

WARNING:

Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time.

Note: Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. 

WARNING:
Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. 

Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

Compatible with: MK3S, MK3, MK2.5S, MK2.5, MMU2S, MK3S+, MMU2, MK4, MK3.9, MMU3, MK3.5, MK4S, MK3.9S

This product includes:

• Prusa Nozzle brass - selected size (1pc)
• Nextruder Heaterblock (1pc)
• Heater 40 W - 120 mm set (1pc)
• Thermistor NTC 100k - 115 mm (1pc)

• Prusa CORE One 3D Printer
• 1kg spool of 123-3D Black PLA

• Prusa CORE One 3D Printer KIT
• 1kg spool of 123-3D Black PLA

• Knife tip: for cutting support material
• Needle point: for clearing small holes
• Spoon tip: for removing wires and smoothing surfaces
• Standard tip: for general use

• Knife tip: for cutting support material
• Large blade point: for cutting support material
• Needle point: for clearing small holes
• Standard tip: for general use
• Spoon tip: for removing wires and smoothing surfaces
• Large spoon tip: for removing wires and smoothing surfaces
• Detail point: for updating detail work
• Ironing point: for levelling surfaces
• Countersink point: for countersinking holes
• Insertion point: for inserting metal parts

• The versatile Modifi3D post-processing tool
• Needles to clear a clogged 3D printer nozzle
• Superlube to keep your 3D printer in optimum condition
• 3D print post-processing set to keep everything neat and clean
• Digital caliper for fine calibration of your 3D printer
• A putty knife to easily remove printed objects from the print bed