Anycubic Photon Mono M7 Max Resin printers Printing technique 3D printers Anycubic Photon Mono M7 Max 3D printer 123-3d.co.uk

Quantity	Product
No products
Total: £0.00

Anycubic Photon Mono M7 Max 3D printer DKI00317

2
1
0

Description Go for precision, volume and speed with the Photon Mono M7 Max 3D printer from Anycubic. Thanks to the build volume of this printer, you can easily print larger models such as masks or cosplay parts in one go. It is also possible to print multiple small models at the same time, increasing your productivity. With a maximum print speed of 63 mm/h, you can print considerably faster than with previous models.

High precision
The LighTurbo 3.0 high-precision light source uses a fresnel lens in combination with a COB light source. This ensures an accuracy of 46 µm and a model tolerance of ± 0.01 – 0.05 mm. This means that even the smallest details will be printed razor-sharp. The smart release system uses self-designed algorithms and mechanical sensors to dynamically adjust the lift height of each layer. This increases the chance of success with your 3D print.

User friendly
The Anycubic Photon Mono M7 Max has an automatic 3D printer inspection, which checks the internal parts of your 3D printer. Also, the residue detection will notify you when there are hardened pieces left in the resin vat, so you can clean them up and prevent your 3D print from failing. When your 3D printer is approaching 45,000 releases, the system will give you a notification, so you can replace your film in time. When the printer detects that a 3D print is not being printed properly, it will pause so you can fix the problem. After your printer is done, the model can be hung above the vat at an angle so that excess resin can drip off. Thanks to the user-friendly user interface, you can easily operate this 3D printer.

Automatic
The even heating automatically heats the resin to a temperature of 25 ˚ C, but it is also possible to preheat the resin manually to a temperature between 20 and 40 ˚ C. The 7K 6480 x 3600 px high resolution screen ensures sharp details and by using the anti-aliasing function an even smoother result can be achieved. Thanks to the automatic resin recycling, the resin levels are monitored with a sensor and refilled by the built-in air pump. This prevents your 3D print from being interrupted and reduces waste. You can also choose to manually refill the resin barrel when you receive a message that the resin level is too low.

Handy design
The easy flip-open design makes it possible to open the lid with even 1 hand. The leveling guide allows you to level your 3D printer on 4 points in an instant. The 1300ml resin tank is larger than previous models, making this 3D printer ideal for creating larger and industrial models. The air shaft can be connected to an external air purifier to reduce resin smell and improve air quality.

Specifications

Dimensions:	425 x 362 x 652 mm	Hazard class:	n/a
Input voltage:	110-240V	Printer has USB:	yes
Brand:	Anycubic	Max print depth:	16.4 cm
Weight:	24 kg	Max print width:	29.8 cm
UV wavelength:	405 nm	Max print height:	30 cm
Light source:	UV LED	Printer bed levelling:	automatic
Network:	WiFi	Filament sensor:	no
Heated bed included:	no	Max print volume:	14.661
Camera included:	no	Our item no:	DKI00317
Printing technique:	SLA DLP	Printer voltage:	24 v/°c

Order now, we can ship this tomorrow!

£668.00 (Incl. 20% VAT)
(£556.67 Excl. 20% VAT)

In stock

SUNLU SL UC01 Ultrasonic cleaner

Zoom in

Description Ultrasonic cleaner with 2.7L capacity from SUNLU. Multispeed & time control options included.

Specifications

Dimensions:	269 x 166 x 230 mm	Brand:	Sunlu
Power rating:	60 W	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01705

Order now, we can ship this tomorrow!

£68.49 (Incl. 20% VAT)
(£57.07 Excl. 20% VAT)

In stock

Anycubic 13.6 inch Quick Release Film for Photon Mono M7 Max (2 pcs)

Zoom in

Description The Anycubic Quick Release Film is a high-quality ACF release film specifically designed for the Photon Mono M7 Max resin printer. This film is optimized for high print speeds and consistent print quality, making it an essential consumable for users seeking accurate and efficient 3D printing. The film comes in a set of two and is easy to install.

Specifications

Brand:	Anycubic	Our item no:	DAR02137
Hazard class:	n/a

£42.97 (Incl. 20% VAT)
(£35.81 Excl. 20% VAT)

14 day delivery

Anycubic 13.6 inch Quick Release Film for Photon Mono M7 Max (5 pcs)

Zoom in

Description The Anycubic Quick Release Film is a high-quality ACF release film specifically designed for the Photon Mono M7 Max resin printer. This film is optimized for high print speeds and consistent print quality, making it an essential consumable for users seeking accurate and efficient 3D printing. The film comes in a set of two and is easy to install.

Specifications

Brand:	Anycubic	Our item no:	DAR02138
Hazard class:	n/a

£60.33 (Incl. 20% VAT)
(£50.28 Excl. 20% VAT)

14 day delivery

Anycubic Photon Mono M7 Max Screen Protector (5 pieces)

Zoom in

Description The Anycubic LCD Screen Protector is an essential accessory for the Photon Mono M7 Max resin printer. This screen protector is specially designed to protect the 13.6-inch LCD screen from scratches, resin residue, and other potential damage. At just 0.1 mm thick, the screen protector offers high light transmission, preserving print quality.

Specifications

Brand:	Anycubic	Our item no:	DAR02142
Hazard class:	n/a

£15.19 (Incl. 20% VAT)
(£12.66 Excl. 20% VAT)

14 day delivery

Anycubic Photon Mono M7 Max Build Plate

Zoom in

Description Original aluminum build plate for the Photon Mono M7 Max resin printer. Offers excellent adhesion and makes print removal easy. It provides a stable, flat surface for high-quality, consistent print results.

Specifications

Brand:	Anycubic	Our item no:	DAR02143
Hazard class:	n/a

£94.61 (Incl. 20% VAT)
(£78.84 Excl. 20% VAT)

14 day delivery

Anycubic Photon Mono M7 Max LCD Screen

Zoom in

Description The UV LED module for the Anycubic Photon Mono 4 is an essential replacement part that ensures even and powerful UV exposure during the printing process. This module is specifically designed for the Photon Mono 4 and includes a UV light panel, resulting in accurate and reliable prints.

Specifications

Brand:	Anycubic	Our item no:	DAR02144
Hazard class:	n/a

£166.94 (Incl. 20% VAT)
(£139.12 Excl. 20% VAT)

14 day delivery

Anycubic Air Purifier for Photon Mono M7 (Pro / Max) | Mono 4 Ultra (2 pieces)

Zoom in

Description Make your resin prints safer and odor-free with the Anycubic Air Purifier Set, specifically designed for the Photon Mono M7 series and the Mono 4 Ultra. These compact air purifiers effectively filter unpleasant odors and harmful substances released during resin printing. Thanks to their simple plug-and-play design, they're ready to use right out of the box.

Specifications

Brand:	Anycubic	Our item no:	DAR02145
Hazard class:	n/a

£20.40 (Incl. 20% VAT)
(£17.00 Excl. 20% VAT)

14 day delivery

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007
Brand:	Modifi3D

Extra information

Instructional video

Order now, we can ship this tomorrow!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	30 W	Brand:	Modifi3D
Max operating temp:	450 °C	Weight:	0.12 kg
Voltage:	24 v	Hazard class:	n/a
Cable length:	150 cm	Our item no:	DGS00090

Order now, we can ship this tomorrow!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

In stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:	123-3D	Our item no:	DGS00122
Hazard class:	n/a

£94.50 (sold out) (Incl. 20% VAT)
(£78.75 Excl. 20% VAT)

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Quantity:	4 Quantity	Hazard class:	n/a
Brand:	Steelmans3D	Our item no:	DAR00265
Video promo:	Promotional video

Order now, we can ship this tomorrow!

£14.50 (Incl. 20% VAT)
(£12.08 Excl. 20% VAT)

In stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Popular products

Anycubic Photon Mono M7 Max

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Newsletter

Popular products

Anycubic Photon Mono M7 Max