All 3D printers Printing technique 3D printers Original Prusa XL Assembled, Single-toolhead 3D printer 123-3d.co.uk

Anycubic Kobra 3 (combo) 3D Printer with ACE Pro System Reduced!

Anycubic Kobra 3 (combo) 3D Printer with ACE Pro System DKI00263

1
0

Description Anycubic Kobra 3 3D Printer with ACE Pro multi-filament system for multi colour printing.

Bring the most colorful 3D prints to life with the Anycubic Kobra 3 Combo. This 3D printer comes with an Anycubic Color Engine Pro, allowing you to 3D print with up to 4 colors or types of filament at the same time. The Anycubic Color Engine Pro will automatically switch between colors or spools, allowing you to also use two spools of the same color as a backup for each other.

Intelligent
The smart algorithm helps the Anycubic Color Engine Pro load the right filament within a minute. To prevent the filament from becoming tangled, it is guided through 4 different tubes to the extruder. There is also a constant check to see whether the filament has run out. If this is the case, the screen will provide a real-time reminder, so there is less chance of your print failing. In addition, the algorithm measures the pressure in the nozzle for smooth extrusion, layer by layer. With just the push of a button you can use the vibration compensation. This will make your prints much smoother. The Kobra 3 Combo can also easily resume printing after a power failure or running out of filament.

User friendly
This 3D printer is very easy to set up and is suitable for both beginners and advanced users. Use the automatic bed leveling to always have a perfectly level print bed. You can easily operate the printer with the touchscreen, which you can also rotate 30˚ to 60˚ for extra comfort. The nozzle goes up to 300˚ C, making it suitable for many different types of filaments. In addition, it can be replaced easily and without tools. The 32 bit MCU has a silence sensor to reduce noise to a maximum of 50 dB. This means you will not be bothered by noise pollution during printing.

Other functionalities
The Kobra 3 has a sturdy frame that is suitable for long-term stable printing, even at high speeds. The stylish design ensures that this printer fits well in almost any interior. With a construction volume of no less than 250 x 250 x 260 mm and a maximum printing speed of 600 mm/s, you can easily make 3D prints of different sizes. The cooling fan spins up to 7,000 rpm, so your 3D models are cooled quickly. The filament can be dried during 3D printing, so it is always in optimal condition for printing. In addition, the filament is also kept dry when you are not printing. Finally, you can easily control your 3D printer via the Anycubic app ( Android & iOS )

Specifications

Dimensions:	505 x 453 x 483 mm	Printer has USB:	yes
Power rating:	400 W	Max print depth:	25 cm
Input voltage:	100-240V	Max print width:	25 cm
Filament diameter:	1.75 mm	Max print height:	26 cm
Nozzle diameter:	0.4 mm	Printer bed levelling:	automatic
Printer no of extruders:	1	Heatbed max temp:	100 °C
Brand:	Anycubic	Filament sensor:	yes
Weight:	13.8 kg	Printer extruder:	Direct
Network:	WiFi	Max print volume:	16.25
Heated bed included:	yes	Our item no:	DKI00263
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg

£70.00 £49.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack

£72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg

£70.00 £49.00

*Filament not included

Was: £290
Now: £269

Order now, we can ship this today!

£269.00

£224.17 Excl. 20% VAT

In stock

Creality Hi Combo

Zoom in

Description Create the most colorful 3D prints with the Hi 3D printer from Creality. This 3D printer has a maximum print speed of 500 mm/s and a maximum acceleration of 12000 mm/s², allowing you to print in no time. With this combo you not only get the printer, but also a CFS, with which you can print up to 4 colors simultaneously.

Multi material system
The Creality Hi can be used in combination with the Creality Filament System, or CFS. This allows you to use up to 4 colours or materials in the same 3D print, without having to change them manually. This is ideal for making vibrant prints or for making complicated prints with supports of solvent material. It is also possible to connect 4 CFS units together, so the possibilities go up to 16 colours.

User friendly
Because this 3D printer is delivered 95% pre-assembled with a handy boot-up quick guide, you can get started even faster. The movable 3.2 inch touchscreen makes it easy to operate the printer and with the camera you can easily make videos of your 3D prints and time lapse videos. In addition, the camera comes with a privacy slider, which protects your privacy. There are also no problems with noise pollution due to the noise level of ≤ 48 dB.

Useful features
Thanks to automatic bed leveling and x-axis tilt reduction, where two individual leadscrews adjust the x-axis position, you are assured of a perfect first layer every time. The 1000W heatbed can heat up to 60˚C in 30 seconds or to 100˚C in 90 seconds, so you can get started quickly. The Creality Hi indicates its status with sound. For example, a sound will be played when the printer unexpectedly pauses or has finished printing. The 3D printer uses a proprietary algorithm that actively neutralizes vibrations, so you can quickly create prints with a smooth surface.

Sturdy design
The Creality Hi has a full metal design that is cast from an aluminum alloy, making it very sturdy. The advanced extruder has wear-resistant metal gears that last a long time. In addition, the 'run-out' sensor monitors whether the filament is broken or empty. If there is still a spool of the same filament available in the CFS, it will automatically be switched to this.

Specifications

Dimensions:	40.9 x 39.2 x 47.7 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	26 cm
Filament diameter:	1.75 mm	Max print width:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	100 °C
Weight:	11.31 kg	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	20.28
Camera included:	yes	Our item no:	DKI00323
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Recommended

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg

£70.00 £49.00

123-3D Filament PLA Glitter Bundle 1.75mm 4 Pack

£72.00

123-3D Filament PLA Starterpack Black, White, Red, Yellow and Dark Blue 1.75mm 1kg

£70.00 £49.00

123-3D Adhesive Spray (150 ml)

£6.50

Order now, we can ship this today!

£359.00

£299.17 Excl. 20% VAT

In stock

Creality 3D K1C (2025 Edition) 3D printer + 1kg Black PLA & 1kg White PLA

Zoom in

Description This bundle includes:

1x Creality K1C (2025 Edition) 3D Printer - more details
1x 1kg spool of 123-3D 1.75mm black PLA - more details
1x 1kg spool of 123-3D 1.75mm white PLA - more details

Specifications

Dimensions:	35.5 x 35.5 x 48 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	22 cm
Filament diameter:	1.75 mm	Max print width:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	100 °C
Weight:	12.5 kg	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	12.1
Camera included:	yes	Our item no:	DKI00253
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Recommended

123-3D Adhesive Spray (150 ml)

£6.50

Order now, we can ship this today!

£399.00

£332.50 Excl. 20% VAT

In stock

Uniformation GK3 3D Printer

Zoom in

4
3
2
1
0

Description

With ground-breaking features and smart technology, the GK3 from UniFormation takes your creative projects to a whole new level. Perfect precision, maximum efficiency and user-friendly operation - high-quality results.

The main difference between the GK3 and GK3 Pro lies in the light source. The GK3 uses a 405 nm UV light source, while the GK3 Pro is equipped with a 385 nm UV light source. The shorter wavelength of the GK3 Pro allows for more precise control when curing the resin, resulting in finer details and higher print accuracy. Furthermore, the GK3 uses an nFEP film and the GK3 Pro uses a CPFA film.

16K display

With a display resolution of 15120 x 6230 pixels and XY resolution of 14 x 19 µm, the 9.6 inch display enables incredibly fine details and an impressive visualisation of your designs.

COB light source & Fresnel collimator lens

The finely calibrated Fresnel lens not only ensures precise light guidance and reduced light scattering, but also guarantees even and powerful light emission (405 nm). The result is a clearly defined, consistent light beam that precisely cures even the smallest details.

Smart Resin Feeding System

The automatic resin feeding system monitors the fill level and ensures a continuous supply throughout the entire printing process.

Intelligent heating system

The automatic heating system with a preheating function ensures constant temperatures and efficient printing. The printer reaches operating temperatures of 0-25 °C in just 35 minutes.

Integrated camera for smart monitoring

Thanks to the built-in camera, you can always keep an eye on your printing process. Whether it's real-time monitoring or impressive time-lapse recordings.

User-friendly design

UniFormation Smart App,
Building platform with quick-release design,
Resin drip hanger design,
90° rotating touch screen.

Specifications

Dimensions:	392 x 332 x 520 mm	Hazard class:	n/a
Input voltage:	110-220V	Printer has USB:	yes
Brand:	Uniformation	Max print depth:	21.1 cm
Weight:	16.5 kg	Max print width:	11.8 cm
UV wavelength:	-	Max print height:	24 cm
Light source:	UV-COB	Printer bed levelling:	manual
Network:	work ethernet WiFi	Filament sensor:	no
Heated bed included:	no	Max print volume:	5.975
Camera included:	no	Our item no:	DKI00321
Printing technique:	SLA DLP	Printer voltage:	24 v/°c

Order now, we can ship this today!

£455.00

£379.17 Excl. 20% VAT

In stock

Uniformation GK3 Pro 3D Printer

Zoom in

3
2
1
0

Description

The GK3 Pro from UniFormation combines cutting-edge technology with unrivalled ease of use to turn your creative vision into reality. With impressive precision, an innovative heating system and ground-breaking features such as a 16K display and a 385 nm UV light source, this printer sets new standards. Whether you want to create detailed miniatures, functional prototypes or breathtaking designs - the GK3 Pro can achieve it all.

The main difference between the GK3 and GK3 Pro lies in the light source. The GK3 uses a 405 nm UV light source, while the GK3 Pro is equipped with a 385 nm UV light source. The shorter wavelength of the GK3 Pro allows for more precise control when curing resin, resulting in finer details and better print accuracy. Furthermore, the GK3 uses an nFEP film and the GK3 Pro uses a CPFA film.

16K display

With the optimised 16K display, you can admire every detail of your prints. The innovative "Dyed Polariser" ensures a 12% improvement in light transmission at 385 nm UV light and increases contrast by an impressive 21%. It can also withstand temperatures of up to 100 °C, which not only maximises the light output but also significantly increases the durability of the screen.

385 nm UV light source from COB & Fresnel collimator lens

Precision is key, and with the 385 nm UV light source you gain absolute control over your prints. Compared to conventional 405 nm wavelengths, the shorter light offers a lower penetration depth, allowing the finest edges and details to be cured razor-sharp. This reduces overexposure and scattering losses, while significantly increasing the optical quality and accuracy of your models. Perfect results - layer by layer!

Smart Resin Feeding System

The smart resin feeding system monitors the filling level and ensures a continuous supply throughout the printing process.

Intelligent heating system

The automatic heating system with a preheating function ensures constant temperatures and efficient printing. The printer reaches operating temperatures of 0-25 °C in just 35 minutes.

Integrated camera for smart monitoring

Thanks to the built-in camera, you can always keep an eye on your printing process whether it's real-time monitoring or impressive time-lapse recordings.

User-friendly design

UniFormation Smart App,
Building platform with quick-release design,
Resin drip hanger design,
90° rotating touch screen.

Specifications

Dimensions:	392 x 332 x 520 mm	Hazard class:	n/a
Input voltage:	110-220V	Printer has USB:	yes
Brand:	Uniformation	Max print depth:	21.1 cm
Weight:	17 kg	Max print width:	11.8 cm
UV wavelength:	-	Max print height:	24 cm
Light source:	UV-COB	Printer bed levelling:	manual
Network:	work ethernet WiFi	Filament sensor:	no
Heated bed included:	no	Max print volume:	5.975
Camera included:	no	Our item no:	DKI00325
Printing technique:	SLA DLP	Printer voltage:	24 v/°c

Order now, we can ship this today!

£575.00

£479.17 Excl. 20% VAT

In stock

LDO Motors Positron V3.2 Kit

Zoom in

LDO Motors Positron V3.2 Kit

The Positron V3.2 is a portable 3D printer born from a collaboration between KRALYN and LDO Motors. Thanks to a foldable, compact design, the kit fits into a standard filament box and can be taken anywhere - the perfect choice for any hobbyist. The printer with a clever kinematics system is assembled in less than 90 seconds and is immediately ready to complete your 3D models with a maximum printing speed of 250 mm/s and an acceleration of up to 8000 mm/s².

Flexible, adaptable and versatile

The printer uses Klipper to support high speeds and a smooth printing process.
The printer is versatile and can be customised: add a filament runout sensor, an integrated power supply or additional cooling.

Good to know: The printer works “upside down”.

► Note: Some parts of the Positron kit must be printed by you. So make sure you print these parts before you start building the printer! Detailed assembly guides and printed parts files can be found https://www.ldomotion.com/p/assembly/Positron-V32 or on Github

Specifications

Dimensions:	200 x 200 x 270 mm	Printer has USB:	yes
Input voltage:	24V	Max print depth:	18 cm
Filament diameter:	1.75 mm	Max print width:	18 cm
Nozzle diameter:	0.4 mm	Max print height:	16.5 cm
Printer no of extruders:	1	Printer bed levelling:	manual
Brand:	LDO	Heatbed max temp:	85 °C
Weight:	3 kg	Filament sensor:	no
Max print speed:	250 mm/s	Printer extruder:	Bowden
Network:	work ethernet WiFi	Max print volume:	5.346
Heated bed included:	yes	Our item no:	DKI00356
Camera included:	no	Printer extruder max temp:	260 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

Order now, we can ship this today!

£628.00

£523.33 Excl. 20% VAT

In stock

LDO Voron Trident rev D 300 KIT Black

Zoom in

1
0

Description

THE LDO Voron Trident 300 3D Printer Kit

The LDO Voron Trident 300 3D Printer Kit is a top-quality, large-volume, high-speed 3D printer from the premium Voron experts. Trident is perfect for printing heat-sensitive thermoplastics such as ABS and aesthetic thermoplastics like PLA. Sometimes called the "build your own Bambu", the kit includes most of the hardware essentials, and self-assembly is required.

Enclosed traditional coreXY printer
Ideal for large-format, high-speed printing
Includes most hardware essentials

Specifications

Dimensions:	412 x 412 x 346 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	300 cm
Filament diameter:	1.75 mm	Max print width:	300 cm
Nozzle diameter:	0.4 mm	Max print height:	300 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	ethernet	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	27,000
Camera included:	no	Our item no:	DKI00233
Printing technique:	TFDM FFF	Printer extruder max temp:	260 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts. This kit is supplied with black aluminium extrusions.

This product can be ordered 1 time(s).

Order now, we can ship this today!

£1,067.95

£889.96 Excl. 20% VAT

In stock

LDO Voron Trident rev D 300 3D printer KIT Space Grey

Zoom in

2
1
0

Description

THE LDO Voron Trident 300 3D Printer Kit

The LDO Voron Trident 300 3D Printer Kit is a top-quality, large-volume, high-speed 3D printer from the premium Voron experts. Trident is perfect for printing heat-sensitive thermoplastics such as ABS and aesthetic thermoplastics like PLA. Sometimes called the "build your own Bambu", the kit includes most of the hardware essentials, and self-assembly is required.

Enclosed traditional coreXY printer
Ideal for large-format, high-speed printing
Includes most hardware essentials

Specifications

Dimensions:	412 x 412 x 346 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	300 cm
Filament diameter:	1.75 mm	Max print width:	300 cm
Nozzle diameter:	0.4 mm	Max print height:	300 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	ethernet	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	27,000
Camera included:	no	Our item no:	DKI00299
Printing technique:	TFDM FFF	Printer extruder max temp:	260 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts. This kit is supplied with black aluminium extrusions.

Order now, we can ship this today!

£1,067.95

£889.96 Excl. 20% VAT

In stock

LDO Voron Trident rev D 300 KIT - Red

Zoom in

1
0

Description

THE LDO Voron Trident 300 3D Printer Kit

The LDO Voron Trident 300 3D Printer Kit is a top-quality, large-volume, high-speed 3D printer from the premium Voron experts. Trident is perfect for printing heat-sensitive thermoplastics such as ABS and aesthetic thermoplastics like PLA. Sometimes called the "build your own Bambu", the kit includes most of the hardware essentials, and self-assembly is required.

Enclosed traditional coreXY printer
Ideal for large-format, high-speed printing
Includes most hardware essentials

Specifications

Dimensions:	412 x 412 x 346 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	300 cm
Filament diameter:	1.75 mm	Max print width:	300 cm
Nozzle diameter:	0.4 mm	Max print height:	300 cm
Colour:	Red	Printer bed levelling:	semi-automatic
Printer no of extruders:	1	Heatbed max temp:	110 °C
Brand:	LDO	Filament sensor:	no
Weight:	7.5 kg	Printer extruder:	Direct
Network:	ethernet	Max print volume:	27,000
Heated bed included:	yes	Our item no:	DKI00344
Camera included:	no	Printer extruder max temp:	260 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

Colour:

Blue

Purple

Red

This product can be ordered 1 time(s).

Order now, we can ship this today!

£1,067.95

£889.96 Excl. 20% VAT

In stock

LDO Voron 2.4 rev D 350 KIT Black

Zoom in

1
0

Description

BUILT FOR ACCESSIBLE HIGH-SPEED 3D PRINTING

Utilizing a CoreXY, linear rails, and belt z-axis setup with Klipper firmware, Voron 2.4 is designed to deliver fantastic print quality at amazingly fast 3D printing speeds. Assembling this DIY machine is more accessible than ever with LDO's Voron 2.4 Kit which sources/manufactures a significant portion of the hardware needed to get your machine up and running. Containing the best price-to-performance ratio of components, you'll find that you too can build a speedy production-quality FDM 3D printer right from your benchtop.

Key Features of the LDO Voron 2.4 R2 (Rev D) 3D Printer Kit:

Large Print Volume 350 × 350 × 350mm.
Includes majority of the hardware essentials.
All are provided with printer parts (3D printed parts are required).
Premium parts sourced or made by trusted manufacturer LDO.
E3D hotend, Bondtech extruder parts included.
Raspberry PI is required to complete the build.
All necessary wiring is pre-cut and pre-wired.
Bonus kits, accessories, and tools included.
Klicky Mod kit, Nevermore Filter, LED lighting parts, Input Shaper tool kit, etc.
Acrylic panels included for enclosure.
Stainless Steel Linear Rails.

Specifications

Dimensions:	495 x 495 x 420 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	350 cm
Filament diameter:	1.75 mm	Max print width:	350 cm
Nozzle diameter:	0.4 mm	Max print height:	350 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	42,875
Camera included:	no	Our item no:	DKI00232
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts. This kit is supplied with black aluminium extrusions.

This product can be ordered 1 time(s).

Order now, we can ship this today!

£1,124.00

£936.67 Excl. 20% VAT

In stock

LDO Voron 2.4 rev D 350 3D printer KIT Space Grey

Zoom in

2
1
0

Description

Utilizing a CoreXY, linear rails, and belt z-axis setup with Klipper firmware, Voron 2.4 is designed to deliver fantastic print quality at amazingly fast 3D printing speeds. Assembling this DIY machine is more accessible than ever with LDO's Voron 2.4 Kit which sources/manufactures a significant portion of the hardware needed to get your machine up and running. Containing the best price-to-performance ratio of components, you'll find that you too can build a speedy production-quality FDM 3D printer right from your benchtop.

Key Features of the LDO Voron 2.4 R2 (Rev D) 3D Printer Kit:

Large Print Volume 350 × 350 × 350mm.
Includes majority of the hardware essentials.
All are provided with printer parts (3D printed parts are required).
Premium parts sourced or made by trusted manufacturer LDO.
E3D hotend, Bondtech extruder parts included.
Raspberry PI is required to complete the build.
All necessary wiring is pre-cut and pre-wired.
Bonus kits, accessories, and tools included.
Klicky Mod kit, Nevermore Filter, LED lighting parts, Input Shaper tool kit, etc.
Acrylic panels included for enclosure.
Stainless Steel Linear Rails.

Specifications

Dimensions:	495 x 495 x 420 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	350 cm
Filament diameter:	1.75 mm	Max print width:	350 cm
Nozzle diameter:	0.4 mm	Max print height:	350 cm
Printer no of extruders:	1	Printer bed levelling:	semi-automatic
Brand:	LDO	Heatbed max temp:	110 °C
Weight:	7.5 kg	Filament sensor:	no
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	42,875
Camera included:	no	Our item no:	DKI00298
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

IMPORTANT: This item is an unassembled kit that also requires you to 3D print some of the parts.

This product can be ordered 1 time(s).

Order now, we can ship this today!

£1,124.00

£936.67 Excl. 20% VAT

In stock

LDO Voron 2.4 350 rev D 350 3D printer KIT Blue

Zoom in

2
1
0

Description

Utilizing a CoreXY, linear rails, and belt z-axis setup with Klipper firmware, Voron 2.4 is designed to deliver fantastic print quality at amazingly fast 3D printing speeds. Assembling this DIY machine is more accessible than ever with LDO's Voron 2.4 Kit which sources/manufactures a significant portion of the hardware needed to get your machine up and running. Containing the best price-to-performance ratio of components, you'll find that you too can build a speedy production-quality FDM 3D printer right from your benchtop.

Key Features of the LDO Voron 2.4 R2 (Rev D) 3D Printer Kit:

Large Print Volume 350 × 350 × 350mm.
Includes majority of the hardware essentials.
All are provided with printer parts (3D printed parts are required).
Premium parts sourced or made by trusted manufacturer LDO.
E3D hotend, Bondtech extruder parts included.
Raspberry PI is required to complete the build.
All necessary wiring is pre-cut and pre-wired.
Bonus kits, accessories, and tools included.
Klicky Mod kit, Nevermore Filter, LED lighting parts, Input Shaper tool kit, etc.
Acrylic panels included for enclosure.
Stainless Steel Linear Rails.

Specifications

Dimensions:	495 x 495 x 420 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	350 cm
Filament diameter:	1.75 mm	Max print width:	350 cm
Nozzle diameter:	0.4 mm	Max print height:	350 cm
Colour:	Blue	Printer bed levelling:	semi-automatic
Printer no of extruders:	1	Heatbed max temp:	110 °C
Brand:	LDO	Filament sensor:	no
Weight:	7.5 kg	Printer extruder:	Direct
Network:	work ethernet WiFi	Max print volume:	42,875
Heated bed included:	yes	Our item no:	DKI00341
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

This product can be ordered 1 time(s).

Order now, we can ship this today!

£1,124.00

£936.67 Excl. 20% VAT

In stock

Snapmaker Artisan 3-in-1 Premium 40 Watt 3D Printer & Enclosure

Zoom in

Description Bring all your creative ideas to life with the Snapmaker Artisan 3-in-1 Premium. This machine allows you to use no less than 3 techniques: 3D printing, laser engraving and laser cutting. The possibilities are endless thanks to the work surface of 400 mm × 400 mm × 400 mm. The Artisan 3-in-1 Premium has a class 1 certification for safety, which means that the laser is safe to use. The full metal design and sturdy linear rails make it a durable design.

Easy to use
Switch easily and quickly between the different options. Use the 40 W laser engraving module, the 200 W CNC laser cutting module and the dual extrusion 3D printing option. Use the dual extrusion in combination with soluble filament to, for example, be able to remove supports more easily after printing. The quick swap design makes it possible to easily exchange both the different modules and platforms as well as hotends.

Useful features
The advanced vibration compensation helps to work accurately, even at high speeds. This allows the machine to produce straight lines and you get a better end result. The camera gives you a direct and complete view of your laser work. Because the CNC module can handle up to 200 W, it is possible to use many different materials, including hardwood, jade and other hard materials. The wide 7 inch touchscreen has an intuitive UI design, making it easy to operate. Use the Luban software and get started on your project quickly.

Specifications

Laser Power:	40 W	Printer has USB:	yes
Dimensions:	58 x 62 x 63.4 cm	Max print depth:	40 cm
Input voltage:	100-240V	Max print width:	40 cm
Filament diameter:	1.75 mm	Max print height:	40 cm
Printer no of extruders:	2	Printer bed levelling:	automatic
Brand:	Snapmaker	Heatbed max temp:	110 °C
Weight:	52.9 kg	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	64
Camera included:	no	Our item no:	DKI00307
Printing technique:	TFDM FFF	Replaces item no:	DAR01631
Manual:	Download	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

This item is shipped on a pallet due to its weight/size.

Please note: This item has an average delivery time of 1 week.

This product can be ordered 1 time(s).

Order now, we can ship this today!

£2,089.00

£1,740.83 Excl. 20% VAT

In stock

Creality 3D SparkX i7 Combo 3D Printer Pre-order

Creality 3D SparkX i7 Combo 3D Printer DKI00542

Zoom in

Description The Creality SparkX I7 Color Combo is a fast and smart 3D printer with advanced AI capabilities and support for multicolor prints. Its large build volume, fast print speeds, and user-friendly features make it perfect for creatives who want to create colorful, detailed prints without technical hurdles.

Key Features:

Building volume: 260 x 260 x 255 mm
Print speed: up to 500 mm/s with input shaping
Supports PLA, TPU, PETG, PLA-CF and multi-color prints via CFS Lite

Specifications

Dimensions:	470 x 423 x 456 mm	Hazard class:	n/a
Power rating:	900 W	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	26 cm
Filament diameter:	1.75 mm	Max print width:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	25.5 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	100 °C
Weight:	15.5 kg	Filament sensor:	yes
Max print speed:	500 mm/s	Printer extruder:	Direct
Network:	WiFi	Max print volume:	17.238
Heated bed included:	yes	Our item no:	DKI00542
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c

Pre-Order: This item is expected in the 4th week of March 2026. Subject to Change

£319.00

£265.83 Excl. 20% VAT

14 day delivery

Elegoo Centauri Carbon 2 Combo Pre-order

Zoom in

3
2
1
0

Description The Elegoo Centauri Carbon 2 Combo is a powerful multicolor FDM 3D printer designed for makers, hobbyists, and professionals who want fast, reliable, and multi-material printing without complex manual setups. Thanks to the intelligent CANVAS system with automatic filament switching and RFID detection, you can effortlessly print detailed, colorful designs. Ideal for prototypes, artwork, and functional parts.

Key Features:

Multicolor printing with automatic filament change (CANVAS system)
Up to 500mm/s print speed & automatic calibration
High temperature hotend up to 350 °C

Specifications

Dimensions:	500 x 480 x 743 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	25.6 cm
Filament diameter:	1.75 mm	Max print width:	25.6 cm
Nozzle diameter:	0.4 mm	Max print height:	25.6 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Elegoo	Heatbed max temp:	110 °C
Weight:	23.8 kg	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	16.777
Camera included:	yes	Our item no:	DKI00533
Printing technique:	TFDM FFF	Printer extruder max temp:	350 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Please note: This item is expected in the 4th week of March. Subject to change

£399.00

£332.50 Excl. 20% VAT

14 day delivery

Snapmaker U1 3D Printer Pre-Order!

Zoom in

3
2
1
0

Description The Snapmaker U1 is a desktop 3D printer with a unique four-head tool-changing system, allowing you to combine up to four colors or materials in a single print with minimal waste and delay. Thanks to its high-speed SnapSwap™ tool-changing system, CoreXY construction, and automatic calibration, it produces multiple materials with high speed and accuracy.

Building volume: 270 × 270 × 270 mm
Maximum hot-end temperature: 300°C | Print bed temperature: up to 100°C
Printing material (standard): PLA, PETG, TPU, PVA

Specifications

Dimensions:	584 x 499 x 730 mm	Max print depth:	27 cm
Input voltage:	100-240V	Max print width:	27 cm
Filament diameter:	1.75 mm	Max print height:	27 cm
Printer no of extruders:	4	Printer bed levelling:	semi-automatic
Brand:	Snapmaker	Heatbed max temp:	100 °C
Weight:	18.2 kg	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	19.683
Camera included:	yes	Our item no:	DKI00410
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c
Printer has USB:	yes

Please note: Expected delivery from Mid April 2026. Subject to change.

£779.00

£649.17 Excl. 20% VAT

14 day delivery

Elegoo OrangeStorm Giga 3D printer

Zoom in

1
0

Description Create super large 3D prints with the OrangeStorm Giga 3D printer from Elegoo. The impressive build volume of 800 x 800 x 1000 mm offers enough space for creating very large prints or multiple medium-sized prints. The OrangeStorm Giga has a maximum print speed of 300 mm/s, but it is recommended to print at 150 mm/s.

Efficient & intelligent
The efficient heated bed consists of 4 independent build plates with PEI coating. The plates are all 410 x 410 mm and can heat up to a maximum temperature of 90 ˚ C. The plates can be heated up simultaneously within 17 minutes, after which you can start making your 3D prints. It is also possible to heat the plates separately. The position of the model is automatically recognized and heated. If you want to make multiple 3D prints at the same time, it is possible to mount 3 additional print heads. This allows you to print with 4 nozzles at the same time, with the same or different colours and materials. The powerful double-sided cooling fans improve the quality of your 3D prints and stop after the print is completed. This saves energy and extends the life of the fans.

High quality
The OrangeStorm Giga has an elegant and timeless design. The linear x-axis and y-axis rails provide extra stability and an extended lifespan. Thanks to the improved z-axis rails, the 3D printer runs smoothly and the automatic bed leveling is accurate. The upgraded nozzle can handle a maximum temperature of 300 ˚ C, which makes this 3D print suitable for printing various materials, such as PLA, PETG and TPU. The 60 W ceramic heater and the chrome-zirconium-copper nozzle ensure smooth extrusion. The PID automatic calibration function of the nozzle provides even better control over the nozzle temperature. This 3D printer comes standard with a 0.6 mm nozzle.

Other functionalities
You can easily control this 3D printer via the 7 inch HD touchscreen. Handy features such as filament detection and power loss recovery make it easier to make the perfect print.

Specifications

Dimensions:	1,224 x 1,164 x 1,425 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	80 cm
Filament diameter:	1.75 mm	Max print width:	80 cm
Nozzle diameter:	0.6 mm	Max print height:	100 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Elegoo	Heatbed max temp:	100 °C
Weight:	104 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	640
Camera included:	no	Our item no:	DKI00296
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Manual:	Download	Printer voltage:	24 v/°c
Hazard class:	n/a

This article is shipped by pallet due to its weight/size.

This product can be ordered 1 time(s).

£2,020.00

£1,683.33 Excl. 20% VAT

14 day delivery

Elegoo Mars 5 4K 3D printer

Zoom in

2
1
0

Description Create amazing 3D prints with the Mars 5 resin 3D printer from Elegoo. This 3D printer has a build volume of 142.43 x 89.6 x 150 mm and a maximum print speed of 70 mm/h. The xy resolution is 35 x 35 µm (4098 x 2560) and the z-axis precision is 0.02 mm. The 6.6 inch 4K mono LCD screen uses an advanced COB light source, bringing small details and textures to life. The smart mechanical sensor helps you get even more out of your 3D print. Thanks to the residue detection, damage to the LCD screen is prevented. In addition, the Mars 5 gives a notification when there is a shortage of resin and problems with levelling. This means you can always make high-quality 3D prints.

Convenience first
The Mars 5 makes it even easier for you with automatic bed levelling. This 3D printer also comes with a simple self-check. The printer checks whether all components are working properly before it starts 3D printing. In addition, you do not have to worry about overheating, because the 3D printer gives an alarm when overheating and stops printing when the LED temperature exceeds 80 ˚ C. The efficient cooling system ensures that the Mars 5 has a longer lifespan and can continue to perform optimally.

Other functionalities
The quick release design makes it easy to assemble and replace parts. The design is also durable and can be used in combination with the Mars Mate air freshener. The Mars 5 comes with an FEP release film and a laser engraved build plate, which ensures that 3D prints adhere well.

Specifications

Dimensions:	230 x 230 x 434 mm	Hazard class:	n/a
Input voltage:	100-240V	Printer has USB:	yes
Brand:	Elegoo	Max print depth:	8.96 cm
Weight:	8.26 kg	Max print width:	14.343 cm
UV wavelength:	405 nm	Max print height:	15 cm
Light source:	UV-COB	Printer bed levelling:	automatic
Network:	no	Filament sensor:	no
Heated bed included:	no	Max print volume:	1.927
Camera included:	no	Our item no:	DKI00281
Printing technique:	SLA DLP	Printer voltage:	24 v/°c
Manual:	Download

£143.00

£119.17 Excl. 20% VAT

14 day delivery

Anycubic Photon Mono 4 Ultra 3D printer

Zoom in

1
0

Description The Anycubic Photon Mono 4 Ultra has a 7 inch 10K display with a pixel size of 17 x 17 µm and a resolution of 9024 x 5120. This allows you to easily bring your creative ideas to life and capture every detail. The 4.3 inch HD touchscreen has a completely new user interface design for an extra user-friendly and comfortable design.

Smart system
The smart support system helps you create perfect 3D prints and saves you up to 40% of the original printing time. In addition, the Photon Mono Ultra detects whether there is resin left behind so that you can clean it and the screen does not get damaged. The printer also keeps track of how much resin is left and gives a notification when it is too little. Printing is automatically stopped when a 3D print fails and you will receive a notification for other printing problems, such as cracks and detachment from the print bed.

Other functionalities
The Anycubic Photon is equipped with a new generation of ACF film, which has a positive effect on print time and release height. When this film has printed almost 30,000 layers, you will receive a notification to replace the film. This way you are always assured of the best quality. The advanced COB light source and Fresnel Lens provide precise 3˚ purple light, with which you can achieve an accuracy of approximately 0.01 - 0.05 mm. In combination with high speed resin, a speed of 120 mm can even be achieved. Use the Anycubic app ( iOS & Android ) to easily send print jobs via the cloud.

Please note : LCD screens have a limited warranty. If you have any problems, check the warranty period.

Specifications

Dimensions:	236 x 231 x 430 mm	Manual:	Download
Power rating:	72 W	Hazard class:	n/a
Input voltage:	110-220V	Printer has USB:	yes
Brand:	Anycubic	Max print depth:	15.34 cm
Weight:	5 kg	Max print width:	8.704 cm
UV wavelength:	405 nm	Max print height:	16.5 cm
Light source:	UV LED	Printer bed levelling:	manual
Network:	WiFi	Filament sensor:	no
Heated bed included:	no	Max print volume:	2.2
Camera included:	no	Our item no:	DKI00309
Printing technique:	SLA DLP	Printer voltage:	24 v/°c

£210.00

£175.00 Excl. 20% VAT

14 day delivery

Creality 3D Hi 3D printer

Zoom in

1
0

Description Make the most beautiful 3D prints with the Hi 3D printer from Creality. This 3D printer has a maximum print speed of 500 mm/s and a maximum acceleration of 12000 mm/s², so you can finish a print in no time. This printer is expandable with a CFS, so you can print up to 4 colors at the same time.

User friendly
Because this 3D printer is delivered 95% pre-assembled with a handy boot-up quick guide, you can get started even faster. The movable 3.2 inch touchscreen makes it easy to operate the printer and with the camera you can easily make videos of your 3D prints and time lapse videos. In addition, the camera comes with a privacy slider, which protects your privacy. There are also no problems with noise pollution due to the noise level of ≤ 48 dB.

Useful features
Thanks to automatic bed leveling and x-axis tilt reduction, where two individual leadscrews adjust the x-axis position, you are assured of a perfect first layer every time. The 1000W heatbed can heat up to 60˚C in 30 seconds or to 100˚C in 90 seconds, so you can get started quickly. The Creality Hi indicates its status with sound. For example, a sound will be played when the printer unexpectedly pauses or has finished printing. The 3D printer uses a proprietary algorithm that actively neutralizes vibrations, so you can quickly create prints with a smooth surface.

Sturdy design
The Creality Hi has an all-metal design that is cast from aluminum alloy, making it very sturdy. The advanced extruder has wear-resistant metal gears that last a long time. In addition, the 'run-out' sensor monitors if the filament is broken or empty.

Multi material system upgrade
The Creality Hi can be used in combination with the Creality Filament System , or CFS. This allows you to use up to 4 colours or materials in the same 3D print, without having to change them manually. This is ideal for making vibrant prints or for making complicated prints with supports of solvent material. It is also possible to connect 4 CFS units together, so the possibilities go up to 16 colours.

Specifications

Dimensions:	40.9 x 39.2 x 47.7 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	26 cm
Filament diameter:	1.75 mm	Max print width:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	100 °C
Weight:	8.75 kg	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	20.28
Camera included:	yes	Our item no:	DKI00332
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Manual:	Download	Printer voltage:	24 v/°c
Hazard class:	n/a

£189.00

£157.50 Excl. 20% VAT

14 day delivery

Flsun T1 Delta 3D printer

Zoom in

2
1
0

Description The Flsun T1 is an ultra-high speed 3D printer with a maximum speed of no less than 1000 mm/s. The acceleration of 30000 mm/s² and the maximum flow rate of 90 mm³/s help this printer to achieve this speed. The frame is made entirely of metal to ensure stable printing at this speed. This super-fast printer has a powerful stepper motor with unparalleled precision and a CPAP turbofan provides cooling at 30,000 rpm. Easily print PLA, PETG, ABS and more thanks to the closed housing.

Smart assisted system
This printer uses a smart-assisted system, allowing you to make excellent quality prints. For example, the auto-bed leveling and vibration compensation ensure that the layer lines of your project can be printed perfectly. The power loss function makes it possible to resume your print after a power failure, without your print failing or having to start over. The filament detection closely monitors the status of the filament and stops the print if a problem is detected.

Useful functions
The Flsun T1 is equipped with a HEPA and carbon filter, which filters the air as best as possible. In addition, the printer automatically goes into sleep mode when it has not been used for a while and the printer will automatically stop heating once the print is finished. The built-in camera is ideal for monitoring your print in real time or for making timelapses.

Other functionalities
The construction volume is 260 x 330 mm and the maximum bed temperature is 110 ℃. The dual gear direct drive extruder is ultra-lightweight and has a nozzle that can handle a maximum of 300 ℃. Finally, this printer works with the familiar Flsun OS.

Specifications

Dimensions:	436 x 490 x 836 mm	Printer has USB:	yes
Input voltage:	110-240V	Max print depth:	26 cm
Filament diameter:	1.75 mm	Max print width:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	33 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Flsun	Heatbed max temp:	110 °C
Weight:	16.8 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	17.52
Camera included:	yes	Our item no:	DKI00219
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Please note: This is a great high-speed, delta printer, however we do not recommend this for beginners.
This machine took our expert 2 hours to assemble for the first time. If you have any questions about it's suitability for your needs, please submit a ticket to contact us

£500.00

£416.67 Excl. 20% VAT

14 day delivery

Original Prusa MK4S 3D Printer Kit Save

Original Prusa MK4S 3D Printer Kit DKI00288

Zoom in

3
2
1
0

Description Starting with 3D printing has never been easier! With automatic calibration, always-perfect first layer, one-click printing and many other useful features, the MK4S is the best choice for your home, workshop, or company. All print profiles and configurations are in-house tested ensuring that the MK4S effortlessly delivers top-quality 3D prints at a press of a single button from the very start.

With an optional enclosure (available also in bundle with printer) and multi-material upgrade, you can expand your experience as you go, and print with advanced materials or create beautiful multi-colored prints!

Build area: 250×210×220 mm (WxDxH)
Layer height: 0.05 - 0.30 mm
1.75mm filaments: Not vendor-locked
0.4mm nozzle: Easy-to-swap
Removable print sheets
Open-source community-friendly

Please note: This is a kit version and requires assembly

Specifications

Dimensions:	500 x 550 x 400 mm	Printer has USB:	yes
Input voltage:	230CV	Max print depth:	21 cm
Filament diameter:	1.75 mm	Max print width:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Prusa	Heatbed max temp:	120 °C
Weight:	7 kg	Filament sensor:	yes
Network:	no	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	11.55
Camera included:	no	Our item no:	DKI00288
Printing technique:	TFDM FFF	Printer extruder max temp:	290 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Was: £789.90
Now: £643.41!

£670.00

£558.33 Excl. 20% VAT

14 day delivery

Creality 3D K2 Pro 3D-printer

Zoom in

Description The Creality K2 Pro is an advanced, fully enclosed CoreXY 3D printer that excels in speed, stability, and material compatibility. With a generous build volume of 300 × 300 × 300 mm and support for the Creality Filament System (CFS), this printer is ideal for creators who want to produce high-precision multicolor prints. Thanks to its sturdy aluminum frame, servo-step motors, and active heated print chamber, the K2 Pro delivers professional print results, even with demanding materials.

Key Features:

Build volume: 300 × 300 × 300 mm
Print speed: up to 600 mm/s
Hot end temperature: up to 300°C

Specifications

Dimensions:	505 x 445 x 850 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	30 cm
Filament diameter:	1.75 mm	Max print width:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Printer no of extruders:	1	Printer bed levelling:	automatic
Brand:	Creality 3D	Heatbed max temp:	110 °C
Weight:	23.7 kg	Filament sensor:	yes
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	27
Camera included:	yes	Our item no:	DKI00371
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

£779.00

£649.17 Excl. 20% VAT

14 day delivery

Original Prusa XL Semi-assembled 2-toolhead 3D Printer

Zoom in

Description The Original Prusa XL (semi-assembled version) 2-toolhead 3D Printer is a large size CoreXY 3D printer. It has a build volume of 360×360×360mm. This variant includes 2 independent toolheads. This enables you to print large objects quickly, with limited to zero waste. The printer is semi-assembled (and comes with access to an online assembly manual).

Specifications

Dimensions:	700 x 900 x 720 mm	Printer has USB:	yes
Input voltage:	230CV	Max print depth:	36 cm
Filament diameter:	1.75 mm	Max print width:	36 cm
Nozzle diameter:	0.4 mm	Max print height:	36 cm
Printer no of extruders:	2	Printer bed levelling:	automatic
Brand:	Prusa	Heatbed max temp:	120 °C
Weight:	27.9 kg	Filament sensor:	yes
Network:	no	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	46.656
Camera included:	no	Our item no:	DKI00276
Printing technique:	TFDM FFF	Printer extruder max temp:	290 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Printer no of extruders:

Variant:

Please note this item requires some assembly.
Did you know? We are an official Prusa reseller and provide UK based warranty support for printers purchased via 123 3D UK. All items are shipped to you from the UK.

£2,249.00

£1,874.17 Excl. 20% VAT

14 day delivery

Quantity	Product
No products
Total: £0.00

All 3D printers

BUILT FOR ACCESSIBLE HIGH-SPEED 3D PRINTING

Popular products