Stepper motor control

DRV8825 stepstick driver with heat sink (4-pack)

Description Order a 4-pack of DRV8825 stepsticks with 4x heat sinks.

Specifications

Length:	20.4 mm	Brand:	123-3D
Operating volt logic:	3.5 - 25V	Chip:	DRV8825
Operating volt vmot:	-	Hazard class:	n/a
Width:	15.6 mm	Our item no:	DSD00010
Max current:	2.5 A

This product can be ordered 1 time(s).

£26.50

(sold out)

£22.08 Excl. 20% VAT

Stepstick DRV8825 Stepper Motor Driver (123-3D version)

Zoom in

Description The Stepstick DRV8825 is a powerful stepper motor driver and can deliver no less than 2.5A (if properly cooled). It is compatible with Megatronics and the ideal stepper motor driver for current 3D printers.

The Stepstick DRV8825 has the following features:

Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step and 1/32-step
Protected against too high temperatures
Protected against undervoltage
Protected against too high currents
Supports different decay modes
Simple step control interface

Cooling block included (including adhesive layer).

Additional information: data sheet (PDF)

Specifications

Length:	20.4 mm	Brand:	123-3D
Operating volt logic:	3.5 - 25V	Chip:	DRV8825
Operating volt vmot:	-	Hazard class:	n/a
Width:	15.6 mm	Our item no:	DSD00002
Max current:	2.5 A

Order now, we can ship this on Monday!

£5.60

£4.67 Excl. 20% VAT

In stock

TMC2100 Stepper Driver | 1/256 step interpolation

Zoom in

Description The TMC2100 is an advanced stepper motor driver with interpolation functionality. For example, it is possible to have 1/256 microsteps on the output with a 1/16 microstep control. This makes the TMC2100 an incredibly quiet driver, so no heavy CPU is needed.

This stepper motor driver comes with a cooling block.

Specifications

Brand:	123-3D	Hazard class:	n/a
Chip:	TMC2100	Our item no:	DSD00009

Order now, we can ship this on Monday!

£14.50

£12.08 Excl. 20% VAT

In stock

TMC2130 Stepper Driver | 1/256 step interpolation

Zoom in

Description The TMC2130 is an advanced step driver with interpolation functionality. For example, it is possible to have 1/256 microsteps on the output with a 1/16 microstep control. This makes the TMC2130 an incredibly quiet driver, so no heavy CPU is needed.

This step driver has the SPI connection at the top and comes with a separate cooling block.

Specifications

Max voltage VDC:	38	Min voltage:	5 v/°c
Max current:	2.5 A	Hazard class:	n/a
Brand:	123-3D	Our item no:	DSD00013
Chip:	TMC2130

Order now, we can ship this on Monday!

£10.25

£8.54 Excl. 20% VAT

In stock

TL-Smoother including cable

Zoom in

Description With the TL-Smoother you can make your 3D printer even quieter and reduce vibrations.

The smoother is equipped with no less than 8 large diodes that protect your electronics against induction voltages. By using TL-smoother on the X, Y and Z axes of your printer, you get a better print result. The TL-smoother comes with a connection board with 4-pin connectors, so you can easily place the smoother between the stepper motor and the control.

Specifications

Dimensions:	50 x 30 x 9 mm	Hazard class:	n/a
Cable length:	19 cm	Our item no:	DSD00014
Brand:	123-3D

Order now, we can ship this on Monday!

£6.50

£5.42 Excl. 20% VAT

In stock

TB6600 Step Driver | 3.5A | 1/32 microsteps | 9V - 40V

Zoom in

Description This powerful 3.5A TB6600 external stepper motor driver can be controlled with 5V electronics and is equipped with 6 dip-switches. This makes it easy to adjust the various microsteps and power settings.

Specifications

Max voltage VDC:	40	Min voltage:	9 v/°c
Max current:	3.5 A	Hazard class:	n/a
Brand:	123-3D	Our item no:	DSD00012
Chip:	TB6600

£21.50

£17.92 Excl. 20% VAT

14 day delivery

SL2690A Step Driver | 6.5A | 1/128 microsteps | 20V - 90V

Zoom in

Description The SL2690A is a powerful stepper motor driver with a maximum current of 6.5A.

All settings are made by means of the DIP switches. The current is adjustable from 2.8A to 6.5A and the driver has the option of 25600 microsteps.

NOTE: The SL269 driver is especially suitable for the advanced user.

Manual (PDF)

Specifications

Input voltage:	20-90V	Hazard class:	n/a
Brand:	123-3D	Our item no:	DSD00008
Current rating:	6.5 A

Order now, we can ship this on Monday!

£56.95

£47.46 Excl. 20% VAT

In stock

TMC2130 Stepper Driver | 1/256 step interpolation v 3.0

Zoom in

Description The TMC2130 v3.0 is a two-phase stepper driver with a standard SPI interface and a step/dir interface. Because the driver is equipped with interpolation functionality, it is possible to have 1/256 microsteps on the output with a 1/16 microstep driver. This makes the TMC2130 v3.0 an incredibly quiet driver, so that no heavy CPU is required. The stepper driver also offers power control, for energy savings of up to 75%.

Specifications

Operating volt logic:	3.3 - 5V	Chip:	TMC2130
Input voltage:	12-24V	Hazard class:	n/a
Max current:	2 A	Our item no:	DAR00797
Brand:	BigTreeTech

£15.25

£12.71 Excl. 20% VAT

14 day delivery

TMC2208 Stepper Driver | 1/256 step interpolation v 3.0

Zoom in

Description The TMC2208 v3.0 is a single-axis stepper motor drive chip, equipped with interpolation functionality. This makes it possible to have 1/256 microsteps on the output with a 1/16 microstep driver. This makes the TMC2130 v3.0 an incredibly quiet driver, so that no heavy CPU is required. The stepper driver also offers power control, for energy savings of up to 70%.

Specifications

Operating volt logic:	3.3 - 5V	Chip:	TMC2208
Input voltage:	4.75V-36VDC	Hazard class:	n/a
Max current:	2 A	Our item no:	DAR00794
Brand:	BigTreeTech

Order now, we can ship this on Monday!

£4.55

£3.79 Excl. 20% VAT

In stock

TMC2225 Stepper Driver | 1/256 step interpolation v 1.0

Zoom in

Description The TMC2225 stepper driver is a powerful stepper motor driver, equipped with interpolation functionality. This makes it possible to have 1/256 microsteps on the output with a 1/16 microstep driver. This makes the TMC2225 v1.0 an incredibly quiet driver, so that no heavy CPU is required.

Specifications

Operating volt logic:	6.65 - 25V	Chip:	TMC2225
Input voltage:	4.75V-36VDC	Hazard class:	n/a
Max current:	2 A	Our item no:	DAR00796
Brand:	BigTreeTech

£5.25

£4.38 Excl. 20% VAT

14 day delivery

BigTreeTech EZ2209 Step Driver

Zoom in

Description The EZ2209 from BigTreeTech's EZ series has the more modern TMC2209 on board, which does support StallGuard compared to the TMC2208. Thanks to the 1/256 step interpolation, a good 3D printing experience can also be achieved on less powerful electronics boards. The parameters of the TMC2208 chip can be further optimized via a UART connection to your microprocessor. With this module you can supply up to 2A current and works on 12 to 24 Volts.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Max current:	2 A	Chip:	TMC2209
Input voltage:	12-24V	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01029

Order now, we can ship this on Monday!

£5.45

£4.54 Excl. 20% VAT

In stock

BigTreeTech EZ5160 Pro V1.0 Step Driver

Zoom in

Description With the BigTreeTech EZ5160 you get the most powerful module in the series for optimal 3D printing performance. The TMC5160 is powerful, quiet and accepts up to 48V for fast print movements. With 2.5A maximum current and StallGuard you are assured of the highest reliability and precision. To achieve ultimate performance, you can adjust many settings via the SPI connection.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Input voltage:	-	Chip:	TMC5160
Brand:	BigTreeTech	Hazard class:	n/a
Current rating:	2.5 A	Our item no:	DAR01030

Order now, we can ship this on Monday!

£21.50

£17.92 Excl. 20% VAT

In stock

BigTreeTech EZ2208 V1.0 Step Driver

Zoom in

Description The EZ2208 from BigTreeTech's EZ series offers powerful, quiet stepper motor control. Thanks to the 1/256 step interpolation, a good 3D printing experience can also be achieved on less powerful electronics boards. The parameters of the TMC2208 chip can be further optimized via a UART connection to your microprocessor. With this module you can supply up to 2A current and it works on 12 to 24 Volts.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Max current:	2 A	Chip:	TMC2208
Input voltage:	12-24V	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01031

Order now, we can ship this on Monday!

£6.50

£5.42 Excl. 20% VAT

In stock

BigTreeTech EZ2130 V1.0 Step Driver

Zoom in

Description The BigTreeTech EZ2130 from the EZ series contains the silent TMC2130 stepper motor driver. This powerful chip can supply up to 2A current and works between 12 and 24 Volts. To achieve optimal performance, the control parameters can be adjusted through communication via SPI. The maximum supported microstepping mode is 1/256 for this driver.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Operating volt logic:	3.3 - 5V	Chip:	TMC2130
Input voltage:	12-24V	Hazard class:	n/a
Max current:	2 A	Our item no:	DAR01032
Brand:	BigTreeTech

Order now, we can ship this on Monday!

£11.50

£9.58 Excl. 20% VAT

In stock

BigTreeTech EZ6609 V1.0 Step Driver

Zoom in

Description The BigTreeTech EZ6609 has the powerful GC6609 chip on board for optimal performance. Various parameters can be adjusted with the UART connection and the driver delivers up to 2A.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Max current:	2 A	Chip:	GC6609
Input voltage:	12-24V	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01033
Current rating:	1.2 A

Order now, we can ship this on Monday!

£7.25

£6.04 Excl. 20% VAT

In stock

BigTreeTech EZ2225 V1.0 Step Driver

Zoom in

Description The BigTreeTech EZ2225 has the TMC2225 chip on board for good 3D printing results at a competitive price. The 1/256 step interpolation offers a quiet 3D printing experience and the control can be further optimized via a UART connection. We recommend using active cooling to get the most out of this chip.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Max current:	1 A	Chip:	TMC2225
Input voltage:	12-24V	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01034

Order now, we can ship this on Monday!

£5.50

£4.58 Excl. 20% VAT

In stock

BigTreeTech EZ-Driver Connector V1.0

Zoom in

Description Convert any BigTreeTech EZ stepper motor driver board to fit into a Pololu-compatible slot. Very useful if you have a board with Pololu-compatible slots, but want to use the compact EZ drivers. BigTreeTech's EZ series offers a variety of powerful stepper motor drivers, but these are not suitable for the 2x8 pin headers found on many 3D printer electronics boards. This module makes it possible to use the EZ drivers! You just need to take into account the extra height of the module compared to the standard stepper motor control boards.

Please note: This module comes without a driver, these are sold separately

Specifications

Brand:	BigTreeTech	Stepper driver slots:	1
Hazard class:	n/a	Our item no:	DAR01036

Order now, we can ship this on Monday!

£2.45

£2.04 Excl. 20% VAT

In stock

Pololu A4988 Stepper Motor Driver

Zoom in

Description The Pololu A4988 stepper motor driver drives a bipolar stepper motor and has a maximum output current of 2.2A when cooled.

Properties:

Simple step control interface
5 Step resolutions: full step, 1/2 step, 1/4 step, 1/8 step, 1/16 step
Adjustable current output for achieving higher step speeds above the rated voltage of the stepper motor
Intelligent control to automatically switch to the correct power decay: fast decay or slow decay
Automatic shutdown in case of too high temperatures or too high currents
Supplied with all surface-mount components, including A4988 driver

The supplied headers still need to be soldered.

Specifications

Length:	20.3 mm	Brand:	123-3D
Operating volt logic:	3.5 - 5V	Chip:	A4988
Operating volt vmot:	8 - 35V	Hazard class:	n/a
Max current:	2 A	Our item no:	DSD00001
Width:	15.2 mm

£10.95

(sold out)

£9.13 Excl. 20% VAT

Pololu DRV8825 Driver Carrier

Zoom in

Description

Specifications

Brand:	Pololu	Our item no:	DAR00132
Hazard class:	n/a

Order now, we can ship this on Monday!

£10.45

£8.71 Excl. 20% VAT

In stock

Heatsink for Pololu/Stepper Motor Drivers

Zoom in

Description This heatsink can be used for cooling Pololu or Stepstick stepper motor drivers and has a size of 10mm x 10mm x 10mm.

Specifications

Dimensions:	10 x 10 x 10 mm	Brand:	123-3D
Material:	Aluminum	Hazard class:	n/a
Colour:	Black	Our item no:	DSD00004

Order now, we can ship this on Monday!

£1.45

£1.21 Excl. 20% VAT

In stock

Ceramic screwdriver flat, 1.8mm x 0.4mm

Zoom in

Description With this flat ceramic screwdriver you can adjust the step drivers of your 3D printer in no time. The screwdriver is 100% insulated, has an anti-static handle and is fitted with a special ceramic head.

Specifications

Length:	112 mm	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR00622

Order now, we can ship this on Monday!

£3.10

£2.58 Excl. 20% VAT

In stock

Wrecklab PrintHat v2

Zoom in

Description Looking for smooth operation of your 3D printer and extra accuracy when printing?

Introducing the Wrecklab PrintHAT 2 – designed to give you the smoothest and best performance possible. This compact and reliable daughterboard for the Raspberry Pi is smarter, faster and better than its predecessor.

With the PrintHAT 2 you can turn the Raspberry Pi into a powerful controller for 3D printers and small CNC machines. The smart system runs complex computational algorithms on Raspberry PI's powerful CPU, leaving only time-critical tasks to the integrated MCU. As a result, you not only print faster, but also quieter and more accurately.

The main features

A powerful 32-bit processor.
5 state-of-the-art TRINAMICS TMC2209 step drivers.
5 x PWM load.
Improved end stop accuracy via stepper phase detection.
9 configurable IOs.
Sensorless homing.
Extremely quiet operation and smooth movement via StealthChop.
3x 12-bit ADC input.

For beginners and experienced users
The improved installation package makes installation a breeze for beginners or users moving from one controller to another. In addition, there are still more than enough options for the requirements of more experienced users.

Support
The daughterboard supports Klipper, OctoPrint and Mainsails and is suitable for 3D printers, CNC machines and other machines powered by a stepper motor.

Specifications

Brand:	Wrecklab	Our item no:	DAR00354
Hazard class:	n/a

£86.59

£72.16 Excl. 20% VAT

14 day delivery

External step driver slot v2.0

Zoom in

Description With this external board you can add an extra step driver slot in addition to the on-board locks. The PCBs can be easily connected to each other.

The step driver itself is not included, this is only a step driver slot.

Specifications

Brand:	123-3D	Our item no:	DSD00005
Hazard class:	n/a

£13.95

£11.63 Excl. 20% VAT

14 day delivery

Thermal paste, 5g

Zoom in

Description This thermally conductive paste has a very strong adhesive force and is, among other things, very suitable as a thermal interface between heatsinks and power LEDs, VGA cards, step drivers, etc. In addition, this paste is resistant to high temperatures.

Specifications

Melting capacity:	200°C / 24H	Brand:	123-3D
Evaporation:	0.001% (200 C° / 24h)	Volume:	5 grams
Thermal conductivity:	1.2 W/MK	Hazard class:	3
Clotting time:	3 min - 25°C	Our item no:	DSD00003

Order now, we can ship this on Monday!

£4.60

£3.83 Excl. 20% VAT

In stock

Stepstick DS26LV31T Differential Line Driver (v1.0)

Zoom in

Description

Specifications

Operating volt logic:	3.3 - 5V	Hazard class:	n/a
Voltage:	5 v	Download TDS:	Download
Brand:	123-3D	Our item no:	DAR00227
Chip:	DS26LV31T

Order now, we can ship this on Monday!

£2.50

£2.08 Excl. 20% VAT

In stock

BigTreeTech TMC2209 Step Driver | 1/256 step interpolation v1.3 | UART

Zoom in

Description The BigTreeTech TMC2209 Step Driver makes skipping steps and jittering a thing of the past. The driver is super quiet and has good heat dissipation. You can choose from 2 modes: STEP/DIR mode and UART mode. In the STEP/DIR mode there are options for 16, 8, 4 or 2 microsteps. For UART mode, you can use both 4th and 5th pin as UART pin. The potentiometer can be adjusted to better suit your project. Turning this meter clockwise reduces the current supplied to the driver. Turning counterclockwise increases the driver's power supply. Be sure to properly mount the driver before using it for heat dissipation. This prevents the driver from working properly.

Please note: place the driver in the correct orientation on the motherboard. If the driver is placed incorrectly, it may burn out.

Specifications