Snapmaker U1 3D Printer

£650.00 (sold out)

£541.67 Excl. 20% VAT

Description Specifications

Description

The Snapmaker U1 is a desktop 3D printer with a unique four-head tool-changing system, allowing you to combine up to four colors or materials in a single print with minimal waste and delay. Thanks to its high-speed SnapSwap™ tool-changing system, CoreXY construction, and automatic calibration, it produces multiple materials with high speed and accuracy.

Building volume: 270 × 270 × 270 mm
Maximum hot-end temperature: 300°C | Print bed temperature: up to 100°C
Printing material (standard): PLA, PETG, TPU, PVA

Specifications

Dimensions:	584 x 499 x 730 mm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	27 cm
Filament diameter:	1.75 mm	Max print width:	27 cm
Printer no of extruders:	4	Max print height:	27 cm
Brand:	Snapmaker	Printer bed levelling:	semi-automatic
Weight:	18.2 kg	Heatbed max temp:	100 °C
Network:	WiFi	Filament sensor:	yes
Heated bed included:	yes	Printer extruder:	Direct
Camera included:	yes	Max print volume:	19.683
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

Please note: Expected delivery from Early April 2026. Subject to change.

Snapmaker U1
Building volume & machine size
The Snapmaker U1 offers a build volume of 270 × 270 × 270 mm. In terms of external dimensions, the printer is quite compact despite having four heads, with a footprint (including spool holders) of approximately 500 × 600 × 700 mm.

High speed and precision
The Snapmaker U1 is built with CoreXY construction, enabling ultra-fast and precise motion. With print speeds up to 500 mm/s and acceleration up to 20,000 mm/s², you can produce results quickly without sacrificing print quality. Even when switching materials, no valuable time or filament is lost thanks to the fast, fully automatic SnapSwap™.

Multiple colors and materials without effort
This printer features four independent extruders, each with its own hot end. This allows for the combination of four colors or different materials in a single print, without purge towers or manual filament changes. Ideal for complex or visually appealing prints.

Full temperature control
The Snapmaker U1's hotends reach temperatures of up to 300°C, allowing them to reliably print flexible or water-soluble materials like TPU and PVA. The heated print bed reaches temperatures of up to 100°C, ensuring good adhesion and preventing warping with materials like PETG.

Smart features and ease of use
The printer features automatic bed leveling, nozzle alignment, and a built-in camera. Thanks to its user-friendly interface, wireless connectivity, and smart features like filament detection and power-loss recovery, the printer is also suitable for long unattended printing sessions.

Quantity	Product
No products
Total: £0.00