Always perfect 3D prints with the FilaDryer E2 from SUNLU. Thanks to the ultra-high heating power of 500 W PTC, this box can heat up to 50 ˚ C in just 20 minutes and to 70 ˚ C within 30 minutes. The maximum temperature is 110 ˚ C.
Handy & safe
The box is airtight thanks to the silicone seal, which prevents moisture and dust from reaching the filament rolls. The maximum size of suitable spools is Φ 250 mm x 153 mm and it can hold 2 normal spools of 1 or 2 kg, or 1 normal spool of 3 kg. With one click of a button, you can choose from built-in filament settings. In addition, this box is also safe to use thanks to its intelligent safety system. It is made of fire-resistant material and has a double insulation layer, so that the outside does not get extremely hot.
Annealing
The handy FilaDryer E2 can not only dry filament, but also anneal it. Annealing a 3D print increases impact resistance and durability. When heated to 110 ˚ C, 99.99% of technical materials, such as ABS, ASA, PC, CoPA, PA6-CF, can be annealed. The all-round design and innovative locking system ensure that the annealing process runs perfectly. Annealing is perfect for making helmets, screws, nuts and drone accessories.
1000's products available for Next Day Delivery
