SUNLU FilaDryer E2

Always perfect 3D prints with the FilaDryer E2 from SUNLU. Thanks to the ultra-high heating power of 500 W PTC, this box can heat up to 50 ˚ C in just 20 minutes and to 70 ˚ C within 30 minutes. The maximum temperature is 110 ˚ C.

Handy & safe
The box is airtight thanks to the silicone seal, which prevents moisture and dust from reaching the filament rolls. The maximum size of suitable spools is Φ 250 mm x 153 mm and it can hold 2 normal spools of 1 or 2 kg, or 1 normal spool of 3 kg. With one click of a button, you can choose from built-in filament settings. In addition, this box is also safe to use thanks to its intelligent safety system. It is made of fire-resistant material and has a double insulation layer, so that the outside does not get extremely hot.

Annealing
The handy FilaDryer E2 can not only dry filament, but also anneal it. Annealing a 3D print increases impact resistance and durability. When heated to 110 ˚ C, 99.99% of technical materials, such as ABS, ASA, PC, CoPA, PA6-CF, can be annealed. The all-round design and innovative locking system ensure that the annealing process runs perfectly. Annealing is perfect for making helmets, screws, nuts and drone accessories.