TTC-6050 TwoTrees Parts finder Two Trees 500w High Speed Air cooled Spindle 123-3d.co.uk

Two Trees 500w High Speed Air cooled Spindle

1
0

Description Get even more out of your TTC-450 CNC machine with this 500W air-cooled spindle motor from TwoTrees. This spindle motor has enough air cooling to work smoothly at high speed. You can easily install this motor and get started right away. This spindle motor has an rpm of 12000.

Specifications

Max power:	500 W	Hazard class:	n/a
Brand:	TwoTrees	Our item no:	DAR01840
Weight:	1.4 kg

Order now, we can ship this on Monday!

£125.00

£104.17 Excl. 20% VAT

In stock

Two Trees M1 Little Monster CNC Vacuum for TTC-450 & TCC-450 Pro

Zoom in

Description Keep your engravings clean with the M1 Little Monster vacuum cleaner for the TTC-450 and TTC-450 pro. The vacuum cleaner is compact and powerful. In addition, it sucks up dust and other dirt, so that your working environment is always perfectly clean.

Safe
This vacuum cleaner is very safe to use and comes with an automatic start-stop function. Thanks to the overheating protection, the motor will automatically switch off when the maximum temperature is reached. Only when the temperature has dropped to a safe level can the vacuum cleaner be switched on again. You also always have clean air thanks to the negative ion generator and the cotton filter that filters the dust from the air. In addition, the handy LED light makes it possible to clean even in less lit environments.

Other functionalities
The vacuum cleaner bag has a capacity of 2.8 L and is equipped with a zipper, so that the dust can be removed without having to replace the bag immediately. The transparent bottom makes it easy to see when the bag is full.

Specifications

Dimensions:	170 x 170 x 240 mm	Weight:	1.5 kg
Voltage:	24 v	Hazard class:	n/a
Brand:	TwoTrees	Our item no:	DAR01900

Order now, we can ship this on Monday!

£108.00

£90.00 Excl. 20% VAT

In stock

Two Trees Four Milling Combination set 40 Pieces

Zoom in

Description Complete your collection immediately with this 40-piece set of drill bits. These drill bits have a good hardness, good strength and are wear-resistant. You can use this set for both milling and drilling holes and the set can be used with the 1610, 3018, 3018 pro and other engraving machines. The drill bits have a diameter of 3.175 mm and are divided into 4 sets:

10 x Ball Nose Bit 2-Flute Upcut: 3.175 mm(SD) x 2 mm(CED) x 17 mm(CEL) x 38 mm(OAL)
10 x Flat Nose Spiral Bit 2-Flute Upcut: 3.175mm(SD) x 3.175mm(CED) x 17mm(CEL) x 38mm(OAL)
10 x Titanium Coat End Mill CNC Router Bits: The drill sizes range from 0.8 – 3.0 mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.17 mm) 3.175mm(SD) x 12mm (CEL) x 38mm (OAL)
10 x Titanium Coat End Mill CNC Router Bits: Drill sizes range from 0.8 – 3.0 mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.17 mm) 3.175 mm(SD) x 12 mm (CEL) x 38 mm (OAL)

Specifications