2.85mm LW PLA colorFabb yellow LW-PLA filament 2.85mm, 0.75kg 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 01270 433 123
E: info@123-3D.co.uk
Free delivery over £10

Lots of popular payment options!

Official Prusa dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: £0.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

Nozzle set (5-pack)

Nozzle set (5-pack)

£34.00

Home
PLA
2.85mm LW PLA

colorFabb yellow LW-PLA filament 2.85mm, 0.75kg

colorFabb yellow LW-PLA filament 2.85mm, 0.75kg DFP13194

Description This yellow LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The yellow filament has a diameter of 2.85mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Material:	LW-PLA	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Yellow	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13194
Length:	90 m

£23.00 (Incl. 20% VAT) (£19.17 Excl. 20% VAT)

14 day delivery

colorFabb grey-silver LW-PLA filament 2.85mm, 0.75kg

colorFabb grey-silver LW-PLA filament 2.85mm, 0.75kg DFP13021

Description This grey-silver LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament in the colour grey-silver has a diameter of 2.85mm and provides a matte finish. It also starts to foam at about 230°C, increasing its volume by up to three times its original size, while reducing the weight of your prints by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
Print temperature: 195°C to 260°C
Heated bed temperature: 50°C to 60°C (optional)
Print speed: 40mm/s to 100mm/s
Part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Material:	LW-PLA	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Grey / Silver	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13021
Length:	90 m

Order now, we can ship this tomorrow!

£23.00 (Incl. 20% VAT) (£19.17 Excl. 20% VAT)

In stock

colorFabb green LW-PLA filament 2.85mm, 0.75kg

colorFabb green LW-PLA filament 2.85mm, 0.75kg DFP13192

Description This green LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The green filament has a diameter of 2.85mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Material:	LW-PLA	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Green	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13192
Length:	90 m

Order now, we can ship this tomorrow!

£23.00 (Incl. 20% VAT) (£19.17 Excl. 20% VAT)

In stock

colorFabb natural LW-PLA filament 2.85mm, 0.75kg

colorFabb natural LW-PLA filament 2.85mm, 0.75kg DFP13023

Description This natural coloured LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament in the colour natural has a diameter of 2.85mm and provides a matte finish. It also starts to foam at about 230°C, increasing its volume by up to three times its original size, while reducing the weight of your prints by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Material:	LW-PLA	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Natural	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13023
Length:	90 m

Order now, we can ship this tomorrow!

£28.50 (Incl. 20% VAT) (£23.75 Excl. 20% VAT)

In stock

colorFabb red LW-PLA filament 2.85mm, 0.75kg

colorFabb red LW-PLA filament 2.85mm, 0.75kg DFP13025

Description This red LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament in the colour red has a diameter of 2.85mm and provides a matte finish. It also starts to foam at about 230°C, increasing its volume by up to three times its original size, while reducing the weight of your prints by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Material:	LW-PLA	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Red	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13025
Length:	90 m

Order now, we can ship this tomorrow!

£23.00 (Incl. 20% VAT) (£19.17 Excl. 20% VAT)

In stock

colorFabb LW-PLA-HT Filament Dark Gray 2.85mm 0.75 kg

colorFabb LW-PLA-HT Filament Dark Gray 2.85mm 0.75 kg DFP13252

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 2.85mm and has a dark gray color.

Specifications

Material:	LW-PLA-HT	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Inner diameter:	Ø 5.2 cm
Colour:	Dark Grey	Spool width:	5.5 cm
Nozzle temp range:	195 - 240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13252

£39.40 (Incl. 20% VAT) (£32.83 Excl. 20% VAT)

14 day delivery

colorFabb black LW-PLA-HT filament 2.85mm, 0.75kg

colorFabb black LW-PLA-HT filament 2.85mm, 0.75kg DFP13248

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 2.85mm and is black in colour.

Specifications

Material:	LW-PLA-HT	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Inner diameter:	Ø 5.2 cm
Colour:	Black	Spool width:	5.5 cm
Nozzle temp range:	195 - 240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13248

Order now, we can ship this tomorrow!

£26.80 (Incl. 20% VAT) (£22.33 Excl. 20% VAT)

In stock

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007
Brand:	Modifi3D

Extra information

Instructional video

Order now, we can ship this tomorrow!

£29.95 (Incl. 20% VAT) (£24.96 Excl. 20% VAT)

In stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	30 W	Brand:	Modifi3D
Max operating temp:	450 °C	Weight:	0.12 kg
Voltage:	24 v	Hazard class:	n/a
Cable length:	150 cm	Our item no:	DGS00090

Order now, we can ship this tomorrow!

£65.50 (Incl. 20% VAT) (£54.58 Excl. 20% VAT)

In stock

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007
Brand:	Tesa

Order now, we can ship this tomorrow!

£3.90 (Incl. 20% VAT) (£3.25 Excl. 20% VAT)

In stock

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Diameter:	30 mm	Brand:	3DLAC
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this tomorrow!

£6.29 (Incl. 20% VAT) (£5.24 Excl. 20% VAT)

In stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Type:	glue stick	Hazard class:	n/a
Volume:	50	Our item no:	DCP00205

£15.75 (Incl. 20% VAT) (£13.13 Excl. 20% VAT)

14 day delivery

Magigoo Supergrip

Magigoo Supergrip DAR02394

1
0

Description Ensures strong first-layer adhesion to the print bed and prevents warping on materials like PP, PA, and PC. Easy to apply and remove after printing. Works on glass, PEI, and metal beds.

Specifications

Quantity:	1	Volume:	50
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DAR02394

£19.50 (Incl. 20% VAT) (£16.25 Excl. 20% VAT)

14 day delivery

Magigoo 3D glue stick, 120ml

Magigoo 3D glue stick, 120ml DCP00206

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Type:	glue stick	Hazard class:	n/a
Volume:	120	Our item no:	DCP00206

Order now, we can ship this tomorrow!

£41.95 (Incl. 20% VAT) (£34.96 Excl. 20% VAT)

In stock

Magigoo 3D Glide Kit

Magigoo 3D Glide Kit DAR02392

1
0

Description With the Magigoo Glide Kit, you can apply an even layer of adhesive to your print bed in a single motion. Ideal for large surfaces and frequent use.

Specifications

Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DAR02392
Volume:	250

£77.60 (Incl. 20% VAT) (£64.67 Excl. 20% VAT)

14 day delivery

eSun eVacuum kit Pro 3

eSun eVacuum kit Pro 3 DAR01277

Description Keep your filament dry and dust free with the eSun eVacuum kit Pro 3. This kit allows you to vacuum seal your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-colored closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Dimensions:	32 x 32 x 102 mm	Weight:	0.075 kg
Voltage:	5 v	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01277

Order now, we can ship this tomorrow!

£20.39 (Incl. 20% VAT) (£16.99 Excl. 20% VAT)

In stock

eSun eVacuum kit

eSun eVacuum kit DAR01365

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Brand:	eSun	Our item no:	DAR01365
Hazard class:	n/a

£21.50 (sold out) (Incl. 20% VAT) (£17.92 Excl. 20% VAT)

© 2025 - 123-3d.co.uk