2.85mm PETG carbon PETG Hygrometer round 123-3d.co.uk

Quantity	Product
No products
Total: £0.00

REAL black PC-PETG filament 2.85mm, 0.5kg

Description The black PC-PETG (2.85mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Material:	PETG 85% - Carbon 15%	Brand:	REAL
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Outer diameter:	Ø 20.0 cm
Colour:	Black	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	225 - 245 °C	Spool width:	4.5 cm
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02063
Length:	75 m

Order now, we can ship this on Monday!

£24.71 (Incl. 20% VAT) (£20.59 Excl. 20% VAT)

In stock

REAL black PC-PETG filament 2.85mm, 1kg

Zoom in

Description The black PC-PETG (2.85mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Material:	PETG 85% - Carbon 15%	Brand:	REAL
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Outer diameter:	Ø 20.0 cm
Colour:	Black	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	225 - 245 °C	Spool width:	8.0 cm
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02061
Length:	150 m

Order now, we can ship this on Monday!

£51.81 (Incl. 20% VAT) (£43.18 Excl. 20% VAT)

In stock

BASF Ultrafuse black PET CF15 filament 2.85mm, 0.75kg

Zoom in

Description The black BASF PET CF15 filament (2.85mm) has a deep colour and an excellent surface finish. With this filament you can print all kinds of heat-resistant and wear-resistant 3D objects in high resolution. PET CF15 is very dimensionally stable and has very low moisture absorption. This filament contains 15% carbon fibres. As a result, you can also safely use prints of this material in a humid environment.

PET is one of the most widely used plastics in the world: it is very reliable and adheres well. With PET filament you can print just as easily as with PLA, but PET is a lot stronger. You do not need a heated bed for printing with PET but for the best result we advise you to use one.

Specifications

Material:	PET CF15	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm
Colour:	Black	Filament print speed:	-
Nozzle temp range:	220 - 260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00100
Brand:	BASF

£65.05 (Incl. 20% VAT) (£54.21 Excl. 20% VAT)

14 day delivery

E3D V6 hardened steel nozzle, 2.85mm x 0.25mm

Zoom in

Description The replacement v6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.25mm (marking #0) and is suitable for filament with a diameter of 3mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	0.25 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00059

£18.95 (Incl. 20% VAT) (£15.79 Excl. 20% VAT)

14 day delivery

E3D V6 hardened steel nozzle, 2.85mm x 0.30mm

Zoom in

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass version, but has a longer delivery time

This nozzle has an opening of 0.30mm (marking #1) and is suitable for filament with a diameter of 3mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	0.3 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00106

£18.95 (Incl. 20% VAT) (£15.79 Excl. 20% VAT)

14 day delivery

E3D V6 hardened steel nozzle, 2.85mm x 0.40mm

Zoom in

Description The replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm (marking #3) and is suitable for filament with a diameter of 3mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00060

Order now, we can ship this on Monday!

£18.95 (Incl. 20% VAT) (£15.79 Excl. 20% VAT)

In stock

Hygrometer round

Zoom in

Description In addition to a moisture percentage, the round hygrometer also displays the temperature. Its round shape makes it easy to install. The hygrometer is ideal for making a filament storage box.

*The hygrometer is delivered without battery.

Specifications

Colour:	Black	Hazard class:	n/a
Brand:	123-3D	Our item no:	DRW00020

Order now, we can ship this on Monday!

£7.40 (Incl. 20% VAT) (£6.17 Excl. 20% VAT)

In stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Diameter:	30 mm	Brand:	3DLAC
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this on Monday!

£6.29 (Incl. 20% VAT) (£5.24 Excl. 20% VAT)

In stock

123-3D PETG Pellets 1 kg

Zoom in

Description PETG pellets can be used by enthusiastic DIY'ers to make PETG filament themselves. The pellets can also be used with a Direct pellet extruder on a 3D printer. This bag contains 1 kg of undried pellets, to which no dyes have yet been added.

Specifications

Colour:	Neutral	Hazard class:	n/a
Amount:	1 kg	Our item no:	DPL00002
Brand:	123-3D

Order now, we can ship this on Monday!

£9.50 (Incl. 20% VAT) (£7.92 Excl. 20% VAT)

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007
Brand:	Tesa

Order now, we can ship this on Monday!

£3.90 (Incl. 20% VAT) (£3.25 Excl. 20% VAT)

In stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007
Brand:	Modifi3D

Extra information

Instructional video

Order now, we can ship this on Monday!

£29.95 (Incl. 20% VAT) (£24.96 Excl. 20% VAT)

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	30 W	Brand:	Modifi3D
Max operating temp:	450 °C	Weight:	0.12 kg
Voltage:	24 v	Hazard class:	n/a
Cable length:	150 cm	Our item no:	DGS00090

Order now, we can ship this on Monday!

£65.50 (Incl. 20% VAT) (£54.58 Excl. 20% VAT)

In stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Type:	glue stick	Hazard class:	n/a
Volume:	50	Our item no:	DCP00205

Order now, we can ship this on Monday!

£15.75 (Incl. 20% VAT) (£13.13 Excl. 20% VAT)

In stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Type:	glue stick	Hazard class:	n/a
Volume:	120	Our item no:	DCP00206

Order now, we can ship this on Monday!

£41.95 (Incl. 20% VAT) (£34.96 Excl. 20% VAT)

In stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Popular products

2.85mm PETG carbon

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Newsletter

Popular products

2.85mm PETG carbon