ColorFabb

1 - 24 of 157

ColorFabb natural ASA filament 1.75mm, 0.65kg

Description This ColorFabb filament in a natural colour has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance up to 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Material:	ASA	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Natural	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13000
Length:	250 m

£15.00 (sold out)

£12.50 Excl. 20% VAT

ColorFabb black ASA filament 1.75mm, 0.65kg

Zoom in

Description This ColorFabb filament in the colour black has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance of 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Material:	ASA	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Black	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13001
Length:	90 m

Order now, we can ship this on Monday!

£18.00

£15.00 Excl. 20% VAT

In stock

colorFabb black ASA filament 2.85mm, 0.65kg

Zoom in

Description This black colorFabb filament has a diameter of 2.85mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance of 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Material:	ASA	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Black	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13002
Length:	250 m

Order now, we can ship this on Monday!

£20.00

£16.67 Excl. 20% VAT

In stock

colorFabb black HT filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb filament in the colour black has a diameter of 1.75mm. HT filament is odourless and has good firmness. This type of filament is known for its very high temperature resistance up to 100°C. Compared to other copolyester filaments from colorFabb, you can achieve the best mechanical performance with HT filament.

Specifications

Material:	HT	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	100 - 120 °C	Inner diameter:	Ø 5.2 cm
Colour:	Black	Spool width:	5.5 cm
Nozzle temp range:	250 - 280 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13004
Length:	250 m

£31.20 (sold out)

£26.00 Excl. 20% VAT

colorFabb dark grey HT filament 2.85mm, 0.7kg

Zoom in

Description This colorFabb filament in the colour dark grey has a diameter of 2.85mm. HT filament is odourless and has good firmness. This type of filament is known for its very high temperature resistance up to 100°C. Compared to other copolyester filaments from colorFabb, you achieve the best mechanical performance with HT filament.

Specifications

Material:	HT	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	100 - 120 °C	Inner diameter:	Ø 5.2 cm
Colour:	Dark Grey	Spool width:	5.5 cm
Nozzle temp range:	250 - 280 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13009
Length:	90 m

£39.25

£32.71 Excl. 20% VAT

14 day delivery

colorFabb white HT filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb filament in white has a diameter of 1.75mm. HT filament is odourless and has good firmness. This type of filament is known for its very high temperature resistance up to 100°C. Compared to other copolyester filaments from colorFabb, you can achieve the best mechanical performance with HT filament.

Specifications

Material:	HT	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	100 - 120 °C	Inner diameter:	Ø 5.2 cm
Colour:	White	Spool width:	5.5 cm
Nozzle temp range:	250 - 280 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13012
Length:	250 m

Order now, we can ship this on Monday!

£36.22

£30.18 Excl. 20% VAT

In stock

colorFabb white HT filament 2.85mm, 0.7kg

Zoom in

Description This colorFabb filament in white has a diameter of 2.85mm. HT filament is odourless and has good firmness. This type of filament is known for its very high temperature resistance up to 100°C. Compared to other copolyester filaments from colorFabb, you achieve the best mechanical performance with HT filament.

Specifications

Material:	HT	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	100 - 120 °C	Inner diameter:	Ø 5.2 cm
Colour:	White	Spool width:	5.5 cm
Nozzle temp range:	250 - 280 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13013
Length:	90 m

£23.55

£19.63 Excl. 20% VAT

14 day delivery

ColorFabb black LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The black LW-ASA filament from colorFabb has a diameter of 1.75mm. This type of lightweight ASA filament consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96°C.

Note: the colour may vary.

Print recommendation: use a heated platform of 90°C - 100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Material:	LW-ASA	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Black	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13014
Length:	250 m

Order now, we can ship this on Monday!

£22.50

£18.75 Excl. 20% VAT

In stock

ColorFabb natural LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The natural LW-ASA filament from colorFabb has a diameter of 1.75mm. This type of lightweight ASA filament consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96°C.

Note: the colour may vary.

Print recommendation: use a heated platform of 90°C - 100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Material:	LW-ASA	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Natural	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13016
Length:	250 m

Order now, we can ship this on Monday!

£21.00

£17.50 Excl. 20% VAT

In stock

colorFabb natural LW-ASA filament 2.85mm, 0.65kg

Zoom in

Description The natural LW-ASA filament from colorFabb has a diameter of 2.85mm. This type is a lightweight ASA filament that consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96°C.

Note: the colour may vary.

Print recommendation: use a heated platform of 90°C-100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Material:	LW-ASA	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Natural	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13017
Length:	90 m

£27.80

£23.17 Excl. 20% VAT

14 day delivery

colorFabb black LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This black LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament has a diameter of 1.75mm and provides a matte finish. The filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
Print temperature: 195°C to 260°C
Heated bed temperature: 50°C to 60°C (optional)
Print speed: 40mm/s to 100mm/s
Part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Material:	LW-PLA	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Black	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13018
Length:	250 m

Colour:

Order now, we can ship this on Monday!

£28.50

£23.75 Excl. 20% VAT

In stock

colorFabb grey-silver LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This grey-silver LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light, but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour grey-silver has a diameter of 1.75mm and provides a matte finish. The filament starts to foam at about 230°C, increasing it up to almost 3 x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
Print temperature: 195°C to 260°C
Heated bed temperature: 50°C to 60°C (optional)
Print speed: 40mm/s to 100mm/s
Part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Material:	LW-PLA	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Grey / Silver	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13020
Length:	250 m

Colour:

Filament diameter:

Order now, we can ship this on Monday!

£28.50

£23.75 Excl. 20% VAT

In stock

colorFabb grey-silver LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This grey-silver LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament in the colour grey-silver has a diameter of 2.85mm and provides a matte finish. It also starts to foam at about 230°C, increasing its volume by up to three times its original size, while reducing the weight of your prints by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
Print temperature: 195°C to 260°C
Heated bed temperature: 50°C to 60°C (optional)
Print speed: 40mm/s to 100mm/s
Part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Material:	LW-PLA	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Grey / Silver	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13021
Length:	90 m

Colour:

Filament diameter:

Order now, we can ship this on Monday!

£23.00

£19.17 Excl. 20% VAT

In stock

colorFabb natural LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This natural-coloured LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This natural-coloured filament has a diameter of 1.75mm and provides a matte finish. The filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
Print temperature: 195°C to 260°C
Heated bed temperature: 50°C to 60°C (optional)
Print speed: 40mm/s to 100mm/s
Part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Material:	LW-PLA	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Natural	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13022
Length:	250 m

Colour:

Filament diameter:

Order now, we can ship this on Monday!

£28.50

£23.75 Excl. 20% VAT

In stock

colorFabb natural LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This natural coloured LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament in the colour natural has a diameter of 2.85mm and provides a matte finish. It also starts to foam at about 230°C, increasing its volume by up to three times its original size, while reducing the weight of your prints by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Material:	LW-PLA	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Natural	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13023
Length:	90 m

Colour:

Filament diameter:

Order now, we can ship this on Monday!

£28.50

£23.75 Excl. 20% VAT

In stock

colorFabb red LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This red LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This red filament has a diameter of 1.75mm and provides a matte finish. The filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
Print temperature: 195°C to 260°C
Heated bed temperature: 50°C to 60°C (optional)
Print speed: 40mm/s to 100mm/s
Part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Material:	LW-PLA	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Inner diameter:	Ø 5.2 cm
Colour:	Red	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13024
Length:	250 m

Colour:

Order now, we can ship this on Monday!

£28.50

£23.75 Excl. 20% VAT

In stock

colorFabb transparent NGEN filament 2.85mm, 0.75kg

Zoom in

Description This transparent colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Material:	NGEN	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 85 °C	Inner diameter:	Ø 5.2 cm
Colour:	Transparent	Spool width:	5.5 cm
Nozzle temp range:	220 - 240 °C	Filament print speed:	-
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13029
Length:	90 m

£29.20

£24.33 Excl. 20% VAT

14 day delivery

colorFabb light blue NGEN filament 2.85mm, 0.75kg

Zoom in

Description This light blue colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Material:	NGEN	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 85 °C	Inner diameter:	Ø 5.2 cm
Colour:	Light Blue	Spool width:	5.5 cm
Nozzle temp range:	220 - 240 °C	Filament print speed:	-
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13041
Length:	90 m

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£24.20

£20.17 Excl. 20% VAT

In stock

colorFabb light grey NGEN filament 2.85mm, 0.75kg

Zoom in

Description This light grey colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Material:	NGEN	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 85 °C	Inner diameter:	Ø 5.2 cm
Colour:	Light Grey	Spool width:	5.5 cm
Nozzle temp range:	220 - 240 °C	Filament print speed:	-
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13045
Length:	90 m

£29.85

£24.88 Excl. 20% VAT

14 day delivery

colorFabb metal silver NGEN filament 2.85mm, 0.75kg

Zoom in

Description This silver coloured colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Material:	NGEN	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 85 °C	Inner diameter:	Ø 5.2 cm
Colour:	Metal Silver	Spool width:	5.5 cm
Nozzle temp range:	220 - 240 °C	Filament print speed:	-
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13053
Length:	90 m

£29.85

£24.88 Excl. 20% VAT

14 day delivery

colorFabb black NGEN FLEX filament 1.75mm, 0.65kg

Zoom in

Description This colorFabb NGEN Flex in black is a semi-flexible filament with a shore hardness of 95A. NGEN Flex is perfect for printing functional parts that need to be hidden. The black filament is fed through a Bowden tube and can be printed at normal speeds. In addition, NGEN Flex can withstand temperatures up to 125°C.

Printing advice: combine the filament with one of our Creality housings.

Specifications

Material:	NGEN FLEX	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 85 °C	Inner diameter:	Ø 5.2 cm
Colour:	Black	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13058
Length:	250 m

£32.09

£26.74 Excl. 20% VAT

14 day delivery

colorFabb transparent NGEN FLEX filament 2.85mm, 0.65kg

Zoom in

Description This transparent colorFabb NGEN Flex is a semi-flexible filament with a shore hardness of 95A. NGEN Flex is perfect for printing functional parts that need to be hidden. The transparent filament is fed through a Bowden tube and can be printed at normal speeds. In addition, NGEN Flex can withstand temperatures up to 125°C.

Printing advice: combine the filament with one of our Creality housings.

Specifications

Material:	NGEN FLEX	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 85 °C	Inner diameter:	Ø 5.2 cm
Colour:	Transparent	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13061
Length:	90 m

£32.09

£26.74 Excl. 20% VAT

14 day delivery

colorFabb dark grey NGEN FLEX filament 2.85mm, 0.65kg

Zoom in

Description This colorFabb NGEN Flex in dark grey is a semi-flexible filament with a shore hardness of 95A. NGEN Flex is perfect for printing functional parts that need to be hidden. The grey filament is fed through a Bowden tube and can be printed at normal speeds. In addition, NGEN Flex can withstand temperatures up to 125°C.

Printing advice: combine the filament with one of our Creality housings.

Specifications

Material:	NGEN FLEX	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 85 °C	Inner diameter:	Ø 5.2 cm
Colour:	Dark Grey	Spool width:	5.5 cm
Nozzle temp range:	240 - 260 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13063
Length:	90 m

Order now, we can ship this on Monday!

£21.00

£17.50 Excl. 20% VAT

In stock

colorFabb matte black PA-CF low warp filament 1.75mm, 0.7kg

Zoom in

Description The matte black colorFabb PA-CF low warp filament (1.75mm) is professional and very strong. The most important properties are the high tensile strength, great heat resistance and many carbon fibres that are contained in this filament. With the colorFabb PA-CF low warp filament you'll have almost no problems with warping (distortion) and you can also print large 3D prints with confidence.

The ideal printing temperature for this nylon filament is 260°C to 280°C. For best results, set the heated bed to 50°C.

Specifications

Material:	PA-CF	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Inner diameter:	Ø 5.2 cm
Colour:	Matte Black	Spool width:	5.5 cm
Nozzle temp range:	260 - 280 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13068
Length:	250 m