This Bundle contains the Anycubic Photon Mono M7 Max & Wash & Cure 3 Plus
Anycubic Photon Mono M7 Max:
Go for precision, volume and speed with the Photon Mono M7 Max 3D printer from Anycubic. Thanks to the build volume of this printer, you can easily print larger models such as masks or cosplay parts in one go. It is also possible to print multiple small models at the same time, increasing your productivity. With a maximum print speed of 63 mm/h, you can print considerably faster than with previous models.
High precision
The LighTurbo 3.0 high-precision light source uses a fresnel lens in combination with a COB light source. This ensures an accuracy of 46 µm and a model tolerance of ± 0.01 – 0.05 mm. This means that even the smallest details will be printed razor-sharp. The smart release system uses self-designed algorithms and mechanical sensors to dynamically adjust the lift height of each layer. This increases the chance of success with your 3D print.
User friendly
The Anycubic Photon Mono M7 Max has an automatic 3D printer inspection, which checks the internal parts of your 3D printer. Also, the residue detection will notify you when there are hardened pieces left in the resin vat, so you can clean them up and prevent your 3D print from failing. When your 3D printer is approaching 45,000 releases, the system will give you a notification, so you can replace your film in time. When the printer detects that a 3D print is not being printed properly, it will pause so you can fix the problem. After your printer is done, the model can be hung above the vat at an angle so that excess resin can drip off. Thanks to the user-friendly user interface, you can easily operate this 3D printer.
Automatic
The even heating automatically heats the resin to a temperature of 25 ˚ C, but it is also possible to preheat the resin manually to a temperature between 20 and 40 ˚ C. The 7K 6480 x 3600 px high resolution screen ensures sharp details and by using the anti-aliasing function an even smoother result can be achieved. Thanks to the automatic resin recycling, the resin levels are monitored with a sensor and refilled by the built-in air pump. This prevents your 3D print from being interrupted and reduces waste. You can also choose to manually refill the resin barrel when you receive a message that the resin level is too low.
Handy design
The easy flip-open design makes it possible to open the lid with even 1 hand. The leveling guide allows you to level your 3D printer on 4 points in an instant. The 1300ml resin tank is larger than previous models, making this 3D printer ideal for creating larger and industrial models. The air shaft can be connected to an external air purifier to reduce resin smell and improve air quality.
Anycubic Wash & Cure 3 Plus:
Speed up the post-processing of your 3D prints by using the Wash & Cure 3 Plus from Anycubic. This Wash & Cure machine has a larger capacity than previous Anycubic Wash & Cure machines. It has a large capacity of 7.6 liters and can wash and cure a 3D print of up to 228 x 128 x 260 mm. It is possible to clean the 3D print by placing it in the supplied basket or by hanging it from the top.
Higher quality
The design uses an innovative Flexicure light with a gooseneck, which increases the energy value by 30,000 W/cm². This results in improved curing in crucial areas, such as the top of your print and other hard-to-reach parts. The Wash & Cure 3 Plus uses a new setup, which cures 3D prints 20% more uniformly. This allows for more precise curing, resulting in greater consistency and higher quality.
Efficient & fast
The basket in which you can place your 3D model for cleaning is made of double-layer PP and supports washing parts with the build plate. In addition, you will never have problems with rust on the basket, because this material is rust-free. The basket comes with two heights at which you can adjust it: 150 mm and 250 mm. This allows the cleaning alcohol to be used more efficiently. The new two-layer curing platform also gives the option to cure a larger number of smaller 3D prints at once. This will speed up your 3D printing process significantly.
User friendly
Both washing and curing can be easily selected. The goose neck light can also be turned on or off with just one click. The washing and curing time can be set between 1 and 30 minutes. The design is designed to operate more quietly, creating a comfortable working environment.
1000's products available for Next Day Delivery
