Curing chambers & Wash and cure stations Accessories Elegoo Mercury Plus Wash & Cure v2.0 123-3d.co.uk

Quantity	Product
No products
Total: £0.00

Elegoo Mercury Plus Wash & Cure v2.0 DCP00218

Description The Elegoo Mercury Plus wash & cure 2.0 is ideal for post-processing resin 3D prints. The device washes the print and then cures it immediately, significantly improving the print quality. Touch buttons allow you to easily set the cleaning and curing time. The LED screen displays the set time and how long it will take before the print is ready. The device has a 360-degree rotating platform and is equipped with 405nm UV curing beads, so that the print cures evenly and quickly. The fanless design ensures the curing process is extra quiet. The Mercury Plus 2.0 is completely sealed with a UV-resistant lid. This lid blocks 99.95% of UV light and prevents the release of alcohol during washing, protecting your health.

The Mercury Plus 2.0 is compatible with most LCD, DLP and SLA 3D printers.

Specifications

Dimensions:	200 x 200 x 352 mm	Weight:	10.3 kg
Power rating:	48 W	UV wavelength:	385-405 nm
Input voltage:	110-220V	Hazard class:	n/a
Brand:	Elegoo	Our item no:	DCP00218

£72.50 (sold out)

£60.42 Excl. 20% VAT

Elegoo Mercury XS Bundle (washing & curing machine)

Zoom in

Description Do you post process many prints and don't want to wait until one print is completely finished? Then the Elegoo Mercury XS Bundle (washing & curing machine) is ideal! With this bundle you can wash a print and cure another print at the same time.

Easy and silent use
The Elegoo Mercury XS Bundle consists of three devices. One device washes the print, the other hardens the print and there is a separate UV lamp for the inaccessible corners. This significantly improves the quality of the prints. You can easily set the cleaning and curing time with the button on the front of the machine. The screen in the button shows the set time and how long it will take before the print is ready. The cure device has a 360° rotating platform, so that the print cures evenly and quickly. Due to the design without fans, the curing process is extra quiet.

Extra safe
During the curing process, the cure device is completely closed with a UV-resistant lid. This blocks 99.9% of UV light. The water tank of no less than 7000 ml is closed with a rubber rim. This prevents the release of alcohol during washing, so that your health is protected. And for the separate UV lamp, UV-resistant glasses are included.

Compatible
The Mercury XS Bundle is compatible with most LCD, DLP and SLA 3D printers.

Contents of the Elegoo Mercury X Bundle (washing & curing machine)

Wash machine
Cure machine
Curing lamps
Curing platform
UV-resistant lid
Wash container
UV resistant glasses
drying rack
Adapter
Instruction manual
Tools
Manual UV Lamp

Specifications

Input voltage:	110-240V	UV wavelength:	385-405 nm
Brand:	Elegoo	Hazard class:	n/a
Weight:	13.1 kg	Our item no:	DAR00846

Order now, we can ship this tomorrow!

£105.50

£87.92 Excl. 20% VAT

In stock

SUNLU UV Resin Curing Chamber

Zoom in

Description The SUNLU UV Resin curing chamber has 16 UV LED lights that cure your resin 3D print perfectly. The room has a 360 degree platform with an improved motor. This will cause all sides of your print to harden evenly. Because the room is completely closed, there is no light pollution. The real-time display shows how long the resin still needs to harden, so you will not be faced with any surprises. The internal dimensions of the room are 20.5 x 17 x 15.5 cm (dxwxh) and the timer can be set between 1 and 600 seconds.

Specifications

Brand:	Sunlu	Our item no:	DAR01386
Hazard class:	n/a

£44.50

£37.08 Excl. 20% VAT

14 day delivery

SUNLU RC2 Resin Dry and Cure Machine

Zoom in

Description This SUNLU dry & cure machine has a 200 x 200 x 250mm curing space. It features a removable turntable and 3 drying speeds. It has a 2kg weight capacity.

Specifications

Dimensions:	235 x 245 x 305 mm	Weight:	2.4 kg
Power rating:	42 W	Hazard class:	n/a
Brand:	Sunlu	Our item no:	DAR01706

Order now, we can ship this tomorrow!

£79.50

£66.25 Excl. 20% VAT

In stock

XYZprinting UV curing chamber

Zoom in

Description The XYZprinting UV curing chamber is ideal for curing your UV resin prints for a beautiful finish. Prints can be cured with a maximum volume of 180mm x 200mm.

The wavelength of the energy-efficient UV LED lamp varies from 375nm - 405nm, allowing prints of various types of resins to be cured.

Some features of the XYZprinting UV curing chamber are:

Timer adjustable from 1 to 60 minutes
Turntable for even lighting
Long life of the UV LED lamp up to 10000 hours
Compatible with various resins (Flexible, Castable, etc.)

All this makes the XYZprinting UV curing chamber a good addition to your SLA printer.

Specifications

Dimensions:	255 x 352 mm	Weight:	4 kg
Max power:	60 W	UV wavelength:	375-405 nm
Depth:	255 mm	Hazard class:	n/a
Brand:	XYZprinting	Our item no:	DFB00001

£332.95 (sold out)

£277.46 Excl. 20% VAT

Anycubic Wash & Cure 3 Plus

Zoom in

2
1
0

Description Speed up the post-processing of your 3D prints by using the Wash & Cure 3 Plus from Anycubic. This Wash & Cure machine has a larger capacity than previous Anycubic Wash & Cure machines. It has a large capacity of 7.6 liters and can wash and cure a 3D print of up to 228 x 128 x 260 mm. It is possible to clean the 3D print by placing it in the supplied basket or by hanging it from the top.

Higher quality
The design uses an innovative Flexicure light with a gooseneck, which increases the energy value by 30,000 W/cm². This results in improved curing in crucial areas, such as the top of your print and other hard-to-reach parts. The Wash & Cure 3 Plus uses a new setup, which cures 3D prints 20% more uniformly. This allows for more precise curing, resulting in greater consistency and higher quality.

Efficient & fast
The basket in which you can place your 3D model for cleaning is made of double-layer PP and supports washing parts with the build plate. In addition, you will never have problems with rust on the basket, because this material is rust-free. The basket comes with two heights at which you can adjust it: 150 mm and 250 mm. This allows the cleaning alcohol to be used more efficiently. The new two-layer curing platform also gives the option to cure a larger number of smaller 3D prints at once. This will speed up your 3D printing process significantly.

User friendly
Both washing and curing can be easily selected. The goose neck light can also be turned on or off with just one click. The washing and curing time can be set between 1 and 30 minutes. The design is designed to operate more quietly, creating a comfortable working environment.

Specifications

Dimensions:	312 x 267 x 434 mm	Weight:	5.7 kg
Power rating:	40 W	UV wavelength:	365-405 nm
Input voltage:	110-220V	Hazard class:	n/a
Brand:	Anycubic	Our item no:	DAR01447

Order now, we can ship this tomorrow!

£148.00

£123.33 Excl. 20% VAT

In stock

Anycubic Wash & Cure Max

Zoom in

1
0

Description Simplify your finishing process with the complete Wash & Cure Max from Anycubic. Washing and curing your model will be streamlined, so you no longer have to do this manually. The white design with gray lid is stylish and minimalist, so it fits in with any interior.

Big format
This machine has an impressive maximum cleaning capacity of 14.9 liters. The maximum size for 3D prints is 300 x 165 x 300. This leaves plenty of room for cleaning and curing one or more of your resin 3D prints. It is also possible to place a model complete with the building plate in this machine.

Efficient
The Wash & Cure Max cleans by using the 'spray cleaning' method. Your print will then be exposed 360° on a rotating platform, so that all sides of your model are evenly cured. The cleaning alcohol is used efficiently, resulting in savings of more than 50%. Due to the cleaning method, your print will still be thoroughly cleaned, without losing much alcohol. A 5 liter isopropyl bucket can clean up to 20 models.

Intelligent
The smart detection will identify problems and notify you. For example, this machine can register when you try to turn on the machine when the lid is open, no water is coming in or when the drain is not working properly and liquid remains in the bucket. This avoids any problems during post-processing.

Specifications

Dimensions:	434 x 434 x 556 mm	Weight:	13.5 kg
Input voltage:	110-220V	UV wavelength:	365-405 nm
Voltage:	24 v	Hazard class:	n/a
Brand:	Anycubic	Our item no:	DAR01451

£268.00

£223.33 Excl. 20% VAT

14 day delivery

Uniformation Ultrasonic Resin Cleaner

Zoom in

2
1
0

Description

Uniformation Ultrasonic Resin Cleaner

The UniFormation Ultrasonic Resin Cleaner W230 ensures that the process of cleaning your resin prints is quick and easy. Effortlessly and gently remove resin from models in a few seconds with this resin cleaner from UniFormation - it won't damage your prints either!

Using high-frequency vibrations (40KHz) to effectively clean your 3D prints, the UniFormation Cleaner is made from corrosion-resistant materials for durability. With a washing volume of 228 x 128 x 200mm, as well as a capacity of 6.5L, the UniFormation Ultrasonic Resin Cleaner supports the deep cleaning of resin prints of a wide variety of sizes.

Fitting seamlessly into your 3D printing setup, the build plate of the Gktwo is able to slide into the slot at the top of the resin cleaner. The model can then be fully submerged in the cleaning fluid, cleaning your prints more thoroughly. You can also take the models off the build plate and place them in the basket for direct cleaning instead, (the fine mesh in the basket means small parts stay still).

Achieve hassle-free cleaning thanks to this resin cleaner’s powerful drainage system and unique flip-top design that allows you to store the cleaning fluid to be re-used at another time when the cover is closed.

Ensure a premium finish for your prints with the UniFormation Ultrasonic Resin Cleaner W230.

Specifications

Dimensions:	202 x 382 x 330 mm	Weight:	8.5 kg
Input voltage:	110-220V	Hazard class:	n/a
Brand:	Uniformation	Our item no:	DKI00226

Did you know? We are an authorised UK UniFormation retailer.

Order now, we can ship this tomorrow!

£226.00

£188.33 Excl. 20% VAT

In stock

Uniformation 405nm UV Resin Curing Station 10.2"

Zoom in

1
0

Description

UniFormation 405nm UV Resin Curing Station 10.2"

Introducing the Uniformation 405nm UV Resin Curing Station, a convenient solution for finishing your resin prints. Easily view your prints as they cure with the see-through window and a 360° rotation turntable.

The impressive build quality can block up to 99% of UV light, for more efficient and even curing. The spacious design allows you to cure even the most ambitious of projects. With a product size of 300mm (L) x 300mm (W) x 250mm (H), as well as a curing volume of 260mm (D) x 160mm (H), this Uniformation resin curing station is also ideal for batch printing.

Evenly cured prints are assured here, with no blind spots. The 360° automatic rotating turntable ensures that none of your print is missed. Featuring a UV wavelength of 400 – 405nm, this light box prevents over and under-curing. Prints are also sturdy and feature a high-shine finish thanks to the powerful UV lights, with 4 LED strips on all sides of the machine, (16 UV lights).

The Uniformation 405nm UV Resin Curing Station works with most resin 3D printers (including the UniFormation GKtwo) and can be used to print a wide range of models including dental models, jewellery, parts and prototypes. Finally, the flip-up lid makes the curing station more compact when working, for greater efficiency when curing your resin prints.

D265

Specifications

Dimensions:	300 x 300 x 250 mm	UV wavelength:	405 nm
Input voltage:	110-220V	Hazard class:	n/a
Brand:	Uniformation	Our item no:	DKI00227
Weight:	9 kg	Printer voltage:	24 v/°c

Did you know? We are an authorised UK UniFormation retailer.

Order now, we can ship this tomorrow!

£118.00

£98.33 Excl. 20% VAT

In stock

Uniformation Cure3 Ultra Curing Station

Zoom in

1
0

Description The Uniformation Cure 3 Ultra Curing Station is a large curing chamber of 362 x 200 mm. This large size is ideal for curing large 3D prints or multiple smaller 3D prints. This makes this curing chamber also very useful for mass production and print farms.

Perfect curing
This curing chamber has 4 UV LED strips that are distributed over the sides. Thanks to the transparent 360 ˚ turntable, your 3D print is evenly illuminated from all sides. This way you get perfectly cured 3D prints every time. The standard curing time is set at 3 minutes, but can be manually adjusted to easily 30 minutes. To get even more out of your 3D print, you can use this machine to dry the print. The built-in drying system can be set up to 50 ˚ and between 0 and 15 minutes, so you can be sure that the print is perfectly dry before it is cured. The print is cured with 400 – 405 nm UV light.

Safety first
The 500 cm² carbon filter is magnetic and can be attached to the back of the machine. This makes it easy to place and replace. This filter ensures that there is less nuisance from resin odor, so you are assured of a safe working environment. For extra safety when using this curing chamber, there is an extra safety feature that prevents the machine from starting when the lid is open. In addition, the chamber has a plastic protection against exposure to UV light.

Included with the Cure 3 Ultra Curing Station:

Acrylic turntable
Air filter
Philips screwdriver
Power cord
Screws

Check out Uniformation Resin here:

Specifications

Dimensions:	399 x 437 x 305 mm	UV wavelength:	405 nm
Input voltage:	110-220V	Hazard class:	n/a
Brand:	Uniformation	Our item no:	DAR01848
Weight:	15.1 kg	Printer voltage:	24 v/°c

Order now, we can ship this tomorrow!

£230.90

£192.42 Excl. 20% VAT

In stock

Elegoo Mercury Plus 3.0 Wash & Curing Machine

Zoom in

Description Go for a perfect curing with the Mercury Plus 3.0 Wash & Cure machine from Elegoo. With this machine you can not only wash your print, but also cure it directly. This saves you time and effort and you also have a perfect 3D print. The buttons make it possible to manually set the washing and curing time between 0 and 30 minutes. You can wash a model of up to 214 x 135 x 180 mm when using the platform. Without a platform, the model can be up to 230 x 135 x 260 mm. The maximum size for curing is ⌀ 250 x 290 mm. The Mercury Plus works with 48 W and uses 100-240 V, 50/60 Hz, 24 V and 2 A.

Specifications

Dimensions:	302.5 x 302.5 x 412.5 mm	Brand:	Elegoo
Power rating:	48 W	Hazard class:	n/a
Input voltage:	100-240V	Our item no:	DAR01893

£99.00

£82.50 Excl. 20% VAT

14 day delivery

Uniformation GK3 Cure3 Curing Station

Zoom in

Description

The UniFormation Cure3 is a versatile post-processing device that cures your prints cleanly, precisely and effortlessly. Whether large models or multiple smaller objects, the Cure3 ensures first-class results without compromise with its generous curing space of 282 x 162 mm and innovative features.

Fast dry settings

100% dry prints are a must! If isopropanol (IPA) remains on the model before it is cured, white spots and cracks can occur. With the integrated heating system, the drying time can be flexibly set between 0 and 15 minutes.

360° uniform curing

The curing machine is equipped with 4 LED strips that distribute a total of 24 UV light beads on all sides. In combination with the integrated 360° rotating disc, every corner of your 3D model is optimally irradiated with UV light.

The preset curing time is 3 minutes but can be adjusted between 0 and 30 minutes as required.

Built-in air purifier for an odour-free environment

With a 500 cm³ activated carbon filter and a high-speed fan with 4000 rpm speed, the integrated air purifier effectively eliminates the typical resin odour and thus ensures a fresh and pleasant working environment during every printing process!

Specifications

Dimensions:	399 x 437 x 305 mm	UV wavelength:	405 nm
Input voltage:	110-220V	Hazard class:	n/a
Brand:	Uniformation	Our item no:	DAR02500
Weight:	6.5 kg	Printer voltage:	24 v/°c

Order now, we can ship this tomorrow!

£128.50

£107.08 Excl. 20% VAT

In stock

HeyGears UltraCraft Reflex Wash

Zoom in

Description The UltraCraft Wash is a smart cleaning unit that perfectly complements HeyGears Reflex printers. Using an automated vibration process, it cleans your 3D prints quickly and thoroughly, without you having to touch the model. This prevents resin contamination and saves time in your workflow.

Key Features:

Complete cleaning in just 2 to 4 minutes
Vibration cleaning for efficient and even resin removal
Includes two washing containers, suitable for IPA

Specifications

Dimensions:	351 x 272 x 168 mm	Weight:	8 kg
Colour:	Black	Hazard class:	n/a

£370.00

£308.33 Excl. 20% VAT

14 day delivery

HeyGears UltraCraft Reflex Cure

Zoom in

Description A desktop curing machine that simultaneously cures your models inside and out with dual UV wavelengths and a heating mode. Automatic parameter adjustment and 360° exposure create stronger, more consistent prints.

Key Features:

Dual-mode curing with 365 nm + 405 nm UV light
Automatic time and temperature regulation for different resin types
Curing volume approx. 198 × 124 × 220 mm, machine dimensions 370 × 387 × 456 mm

Specifications

Dimensions:	370 x 387 x 456 mm	Network:	WiFi
Colour:	Black	Hazard class:	n/a
Weight:	12 kg

£778.00

£648.33 Excl. 20% VAT

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Popular products

Curing chambers & Wash and cure stations

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Newsletter

Popular products

Curing chambers & Wash and cure stations