Creality 3D CR-10 max upgrades

Creality 3D CR-10 max upgrades

Popular products

Steelmans 3dB noise reduction feet pads DAR00265

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Quantity:	4 Quantity	Hazard class:	n/a
Video promo:	Promotional video	Our item no:	DAR00265

Order now, we can ship this today!

£14.50

£12.08 Excl. 20% VAT

In stock

Creality 3D Sonic Pad

Zoom in

Description With the Creality 3D Sonic Pad you can easily take the ease of use and speed of your 3D printer to a higher level.

This compact control pad runs on Klipper, an open-source 3D printer firmware. Klipper uses the additional computing power of Sonic Pad to support your printer's motherboard. As a result, the motors of your 3D printer are controlled faster and more accurately with smart algorithms. In this way vibrations and resonances are prevented and the end result remains of a very high quality, despite the higher printing speed.

The software and hardware of the Sonic Pad are fully coordinated and brought together in one integrated housing. The large 7 inch touch screen gives you easy access to the various functions and settings. If you are working with Creality Print, UTimaker Cura, Pursa Slicer or Super Slicer the screen can show G-Code model previews.

The Creality Sonic Pad works with almost every FDM 3D printer. You only need to connect the device to the tablet via a USB cable, after which you can configure the whole thing with the included manual. Are you using the Sonic Pad with an Ender-3 (V2, S1 or S1 Pro) 3D printer? Then the settings are already pre-configured and you can discover the possibilities almost immediately. You can also connect the Sonic Pad to your network and control it over the web. Connect a USB webcam and you can even check the progress of your print remotely.

Specifications

Dimensions:	222 x 128 x 40 mm	Weight:	0.46 kg
Colour:	Black	Standard WiFi connection:	802.11 b/g/n
Voltage:	12 v	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR00885

Order now, we can ship this today!

£99.90

£83.25 Excl. 20% VAT

In stock

Creality 3D Creality Wifi Box 2.0 (With MicroSD Card)

Zoom in

Description Increase your 3D printing fun with the Creality WiFi box 2.0 from Creality 3D. By connecting to this you can control your 3D printer remotely in real time and monitor the status of your print via the Creality Cloud app. The box can be configured quickly and easily via Bluetooth. Finally, the printing history of the WiFi box can be uploaded to the cloud with just one click.

Specifications

Dimensions:	90 x 64 x 20 mm	USB version:	USB 2.0
Material:	ABS	Network:	work ethernet WiFi
Current consumption:	2.4 A	Manual:	Download
Colour:	Black	Bluetooth:	-
Voltage:	5 v	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR01274

Order now, we can ship this today!

£36.50

£30.42 Excl. 20% VAT

In stock

Bondtech DDX V3 PH1 for Creality CR-10 (S) Pro & Max

Zoom in

Description Bondtech's DDX V3 PH1 replaces the original Bowden extruder with a direct drive extruder setup. The model is suitable for Creality 3D printers and is compatible with hotends of almost every Creality model. You can also upgrade the hotend to Copperhead or Mosquito.

With this powerful 1.75mm Dual Drive extruder you achieve a higher print quality and you have more options, such as thinner layers, higher resolution prints with small nozzles, high flow prints with larger nozzles and a wider choice of materials.

Further highlights:

Effective hotend cooling
3:1 gear ratio
Housing parts made of polyamide (PA12) with SLS technology for maximum strength and precision

Please Note: A Bondtech DDX Adapter Kit is required to use this product.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00050

Order now, we can ship this today!

£126.95

£105.79 Excl. 20% VAT

In stock

Bondtech DDX V3 Direct Drive Extruder for Creality

Zoom in

Description This extruder has a double drive and therefore delivers high-quality prints. The extruder is suitable for Creality 3D printers and is compatible with hotends of almost any Creality model, but can also be upgraded to a Copperhead or Mosquito hotend. With this extruder you have more options for materials, higher flow and wider nozzles and thinner layers to achieve a higher print quality.

Specifications

Brand:	Bondtech	Our item no:	DBO00054
Hazard class:	n/a

Order now, we can ship this today!

£89.10

£74.25 Excl. 20% VAT

In stock

Heated bed spring, 25mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs of your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be levelled less often.

Specifications

Length:	25 mm	Outer diameter:	8 mm
Colour:	Orange	Hazard class:	n/a
Brand:	123-3D	Our item no:	DME00139
Inner diameter:	5 mm

Order now, we can ship this today!

£4.80

£4.00 Excl. 20% VAT

In stock

Heated bed spring, 30mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs for your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be levelled less often.

Specifications

Length:	30 mm	Outer diameter:	8 mm
Colour:	Orange	Hazard class:	n/a
Brand:	123-3D	Our item no:	DME00298
Inner diameter:	5 mm

Order now, we can ship this today!

£4.80

£4.00 Excl. 20% VAT

In stock

Micro Swiss all metal hotend kit for Creality CR-10S PRO | CR-10 Max

Zoom in

Description

This all metal hotend set from Micro Swiss for the Creality CR-10S Pro is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink makes the use of a heatbreak PTFE tube unnecessary and thus ensures better heat dissipation.

The heatbreak is made of fifth grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost 3x lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heatbreak
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
Silicone sock
Fasteners

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
	●	Creality CR-10S Pro
	●	Creality CR 10 Max

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DMS00022
Brand:	Micro Swiss

Order now, we can ship this today!

£57.50

£47.92 Excl. 20% VAT

In stock

Micro Swiss heater block with silicone sock for CR-10 Printers

Zoom in

Description The Micro Swiss heater block with silicone sock is an upgrade for various Creality printers, among others.

Aluminium heater block
Silicone sock
Allen key

Specifications

Material:	Aluminum	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DMS00101

Order now, we can ship this today!

£10.95

£9.13 Excl. 20% VAT

In stock

Micro Swiss silicone socks for MK7 / MK8 / MK9 hotends (3-pack)

Zoom in

Description With these silicone socks you ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, is more favourable for overhangs, bridges and ensures more accurate temperature behaviour.

The sock is suitable for the cartridge type heater block. One sock lasts at least 100 printing hours.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality Ender-2	MakerBot Replicator z18
	Creality Ender-3	CraftBot 2
	Creality Ender-3 Pro	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Anet A6	TronXY X5S
	Anet A8	Tevo Tornado
	Alfawise U20	Micro Swiss All Metal Hotend for CR-10
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10s Pro
	Prusa i3 MK2	anycubic
	Prusa i3 MK2S	Printers with a E3D V4 / V5 / V6 1.75mm Hotend
	Prusa i3 MK3

Specifications

Material:	Silicone	Hazard class:	n/a
Quantity:	3	Our item no:	DMS00102
Brand:	Micro Swiss

Order now, we can ship this today!

£9.95

£8.29 Excl. 20% VAT

In stock

Micro Swiss high temperature MK8 heater block upgrade

Zoom in

Description The Micro Swiss heating block upgrade is made of a high-temperature copper-chrome-zirconium alloy allows you to reach temperatures of up to 500°C. This special alloy retains its strength at much higher temperatures compared to a normal copper alloy.

It is compatible with 100K thermistor, cartridge-style thermistors, thermocouple, PT100 and PT1000 sensors.

Specifications

Dimensions:	21 x 20 x 10 mm	Brand:	Micro Swiss
Material:	Copper	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DMS00122

£18.30

£15.25 Excl. 20% VAT

14 day delivery

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

Compatible with the following printers:

Creality CR-10-S5

Creality CR-10-S4

Creality CR-10S

TronXY X5S

Creality CR-10 MINI

MK7, MK8, MK9 Hotends