Micro Swiss Hotend Micro Swiss Extruder 3D printer parts Bowden hotend kit for Creality 3D Printers ptfe extruder capricorn hot end 123-3d.co.uk

Compatible with the following printers:

Creality CR-10-S5

Creality CR-10-S4

Creality CR-10S

TronXY X5S

Creality CR-10 MINI

MK7, MK8, MK9 Hotends

Micro Swiss all metal hotend kit for Wanhao Duplicator 6

Description

This all metal hotend set from Micro Swiss for the Wanhao Duplicator 6 is the perfect upgrade for your 3D printer. The set has several improvements:

Slot clamp system
No adjusting screw that can damage the heatbreak
Significantly better heat transfer
Easier to disassemble and adjust

The lower part of the heatbreak is made of stainless steel and therefore retains the heat well, the higher part is made of aluminium so that it quickly dissipates the heat away from the filament. Because the heatbreak is completely made of metal, the heat will always be constant and printing can be done at a higher speed and temperature.

The kit contains the following parts:

0.4mm brass nozzle
Heatbreak
Cooling block

Compatible with the following printers:
	●	WANHAO Duplicator 6
	●	Monoprice Maker Ultimate 3D Printer

Specifications

Brand:	Micro Swiss	Our item no:	DMS00017
Hazard class:	n/a

£55.95

£46.63 Excl. 20% VAT

14 day delivery

Micro Swiss all metal hotend kit for CR-10 Ender 3D Printers

Zoom in

Description This all metal hotend set from Micro Swiss for the Creality 3D Printers is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink makes the use of a heatbreak PTFE tube unnecessary and therefore ensures better heat dissipation.

The heatbreak is made of fifth-grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost x3 lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heatbreak
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
Silicone sock
Fastening parts

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
	Creality CR-10	Creality CR-20	Creality Ender-5
	Creality CR-10 Mini	Creality CR-20 Pro	TronXY X5S
	Creality CR-10S	Creality Ender-2	Tevo Tornado
	Creality CR-10S4	Creality Ender-3
	Creality CR-10S5	Creality Ender-3 Pro

NOTE: Not suitable for the Creality CR-10 V2

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DMS00021
Brand:	Micro Swiss

Order now, we can ship this today!

£59.50

£49.58 Excl. 20% VAT

In stock

Micro Swiss all metal hotend kit for Creality CR-10S PRO | CR-10 Max

Zoom in

Description

This all metal hotend set from Micro Swiss for the Creality CR-10S Pro is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink makes the use of a heatbreak PTFE tube unnecessary and thus ensures better heat dissipation.

The heatbreak is made of fifth grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost 3x lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heatbreak
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
Silicone sock
Fasteners

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
	●	Creality CR-10S Pro
	●	Creality CR 10 Max

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DMS00022
Brand:	Micro Swiss

Order now, we can ship this today!

£57.50

£47.92 Excl. 20% VAT

In stock

Micro Swiss all metal hotend kit for Flashforge Finder & Flashforge Guider 2

Zoom in

Description This full metal hotend upgrade from Micro Swiss for the Flashforge and Dremel 3D Printers is the perfect upgrade for your 3D printer. The unique design of the heatsink eliminates the need for a heatbreak PTFE tube. This full metal heatbreak makes it possible to print at higher temperatures and to keep this at a good temperature. This also allows for higher print speed.

The kit contains the following parts:

0.4mm brass nozzle
Heatbreak
2 nuts (To help remove the old hotend)

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
	●	Dremel 3D40 Idea Builder	●	FlashForge Inventor 2
	●	FlashForge Finder	●	FlashForge Guider 2S

●

FlashForge Guider 2 (Old version, without the metal plate over the heater block)

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DMS00019
Brand:	Micro Swiss

Order now, we can ship this today!

£33.95

£28.29 Excl. 20% VAT

In stock

Micro Swiss coated heatbreak for E3D v6 hotends, 3mm

Zoom in

Description This stainless steel heatbreak from Micro Swiss is a direct replacement for the E3D v6 3mm hotends. It is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

Compatible with the following parts:
	●	All E3D v6 3mm Direct and Bowden Hotends

Specifications

Material:	Stainless steel	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DMS00105

£16.25

£13.54 Excl. 20% VAT

14 day delivery

Micro Swiss heater block with silicone sock for CR-10 Printers

Zoom in

Description The Micro Swiss heater block with silicone sock is an upgrade for various Creality printers, among others.

Aluminium heater block
Silicone sock
Allen key

Specifications

Material:	Aluminum	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DMS00101

Order now, we can ship this today!

£10.95

£9.13 Excl. 20% VAT

In stock

Micro Swiss cooling block upgrade for Wanhao i3

Zoom in

Description This all metal cooling block from Micro Swiss has been redesigned. The set has several improvements:

Slot clamp system
The adjusting screw does not cause damage to the heatbreak
Significantly better heat transfer
Easier to disassemble and adjust

Specifications

Brand:	Micro Swiss	Our item no:	DMS00099
Hazard class:	n/a

£20.75

£17.29 Excl. 20% VAT

14 day delivery

Micro Swiss MK10 all metal hotend kit

Zoom in

Description This full metal hotend upgrade from Micro Swiss for MK 10 hotends is made of 2 types of metal. The lower part of the heatbreak is made of stainless steel and therefore retains the heat well, the higher part is made of aluminium so that it quickly dissipates the heat away from the filament. Because the heatbreak is completely made of metal, the heat will always be constant and printing can be done at a higher speed and temperature.
The kit contains the following parts:

0.4mm brass nozzle
heatbreak
thermal paste

To install this set, please refer to the following installation video.

Compatible with the following printers:
	FlashForge Creator Pro	PowerSpec 3D Pro
	FlashForge Creator X	PowerSpec 3D X
	Flash Forge Dreamer	PowerSpec Ultra 3D Printer
	QIDI TECH I	Wanhao Duplicator 4S
	Dremel Idea Builder	Wanhao Duplicator 4X
	Cocoon Create 3D Print	Wanhao Duplicator 9 (D9)
	Monoprice Maker Select 3D Printer v2	Wanhao i3

Specifications

Material:	Metal	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DMS00015
Nozzle type:	MK10

Order now, we can ship this today!

£33.95

£28.29 Excl. 20% VAT

In stock

Micro Swiss plated wear resistant MK8 hotend upgrade

Zoom in

Description This MK8 full metal hotend upgrade from Micro Swiss. The unique design of the heatsink eliminates the need for a heatbreak PTFE tube. The hotend is covered with a TwinClad XT nickel composite coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

Compatible with the following printers and parts:
	●	MakerBot Replicator 1	●	MK8 Hotends
	●	MakerBot Replicator 2

Specifications

Brand:	Micro Swiss	Our item no:	DMS00018
Hazard class:	n/a

Order now, we can ship this today!

£24.95

£20.79 Excl. 20% VAT

In stock

Micro Swiss heatbreak for Micro Swiss all metal hotend kit (CR-10 / CR-10S Pro)

Zoom in

Description This Titanium heatbreak from Micro Swiss is a replacement for the Micro Swiss all metal hotend kit for CR10 printers.

Compatible with the following printers and parts:
	●	Micro Swiss hotend for CR-10 / Ender Kit
	●	Micro Swiss hotend for CR-10s Pro Kit

Specifications

Brand:	Micro Swiss	Our item no:	DMS00113
Hazard class:	n/a

Order now, we can ship this today!

£12.75

£10.63 Excl. 20% VAT

In stock

Micro Swiss Thermal Tube for Flashforge Finder, Inventor 2, Guider 2 all metal hotend kit

Zoom in

Description This heatbreak from Micro Swiss is a replacement for the all metal hotend kit for Flashforge. It is made of 2 types of metal. The lower part of the heatbreak is made of stainless steel and therefore retains the heat well, the higher part is made of aluminium so that it quickly dissipates the heat away from the filament. Because the heatbreak is completely made of metal, the heat will always be constant and printing can be done at a higher speed and temperature.

Compatible with the following printers and parts:
	●	Flashforge Finder	●	Flashforge Inventor 2
	●	Flashforge Guider 2	●	Dremel 3D40 Idea Builder

Specifications

Brand:	Micro Swiss	Our item no:	DMS00115
Hazard class:	n/a

Order now, we can ship this today!

£19.75

£16.46 Excl. 20% VAT

In stock

Micro Swiss Thermal Tube for Micro Swiss MK10 / MK11 all metal hotend kits

Zoom in

Description This heatbreak from Micro Swiss is a replacement for the MK10 / MK11 Hotends. It is made of 2 types of metal. The lower part of the heatbreak is made of stainless steel and therefore retains the heat well, the higher part is made of aluminium so that it quickly dissipates the heat away from the filament. Because the heatbreak is completely made of metal, the heat will always be constant and printing can be done at a higher speed and temperature.

Compatible with the following printers and parts:
	●	FlashForge Creator Pro	●	Monoprice Maker Select 3D Printer v2
	●	FlashForge Creator X	●	Dremel Idea Builder
	●	Flash Forge Dreamer	●	Cocoon Create 3D Print
	●	PowerSpec 3D Pro	●	Wanhao Duplicator 4S
	●	PowerSpec 3D X	●	Wanhao Duplicator 4X
	●	PowerSpec Ultra 3D Printer	●	Wanhao i3
	●	QIDI TECH I	●	Micro Swiss MK10 / MK11 Hotends

Specifications

Brand:	Micro Swiss	Our item no:	DMS00114
Hazard class:	n/a

£19.75

£16.46 Excl. 20% VAT

14 day delivery

Micro Swiss silicone socks for MK7 / MK8 / MK9 hotends (3-pack)

Zoom in

Description With these silicone socks you ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, is more favourable for overhangs, bridges and ensures more accurate temperature behaviour.

The sock is suitable for the cartridge type heater block. One sock lasts at least 100 printing hours.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality Ender-2	MakerBot Replicator z18
	Creality Ender-3	CraftBot 2
	Creality Ender-3 Pro	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Anet A6	TronXY X5S
	Anet A8	Tevo Tornado
	Alfawise U20	Micro Swiss All Metal Hotend for CR-10
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10s Pro
	Prusa i3 MK2	anycubic
	Prusa i3 MK2S	Printers with a E3D V4 / V5 / V6 1.75mm Hotend
	Prusa i3 MK3

Specifications

Material:	Silicone	Hazard class:	n/a
Quantity:	3	Our item no:	DMS00102
Brand:	Micro Swiss

Order now, we can ship this today!

£9.95

£8.29 Excl. 20% VAT

In stock

Bowden hotend kit for Creality 3D Printers

Zoom in

Description Give your Creality 3D printer an upgrade with this Bowden hotend kit.

The hotend kit consists of:

1 x Aluminium MK8 Bowden extruder upgrade kit red right
1 x Capricorn TL 1 Metre transparent PTFE tube 1.75mm
1 x Micro Swiss all metal hotend kit for Creality CR-10 / Ender 3D Printers

The Bowden extruder is made of durable red aluminium and is suitable for filament with a diameter of 1.75mm. With the PTFE tube you can easily connect the whole to the metal Micro Swiss hotend kit, which consists of an aluminium cooling block, a titanium heatbreak, an aluminium heater block, a brass-coated nozzle of 0.4mm, a silicone sock and various mounting parts.

Suitable for the following 3D printers:

Creality CR-10
Creality CR-10 Mini
Creality CR-10S
Creality CR-10 S4
Creality CR-10 S5
Creality CR-20
Creality CR-20 Pro
Creality Ender-3
Creality Ender-3 Pro
Creality Ender-5
Creality Ender-5 Plus

Specifications

Brand:	123-3D	Our item no:	DAR00225
Hazard class:	n/a

This product can be ordered 1 time(s).

Order now, we can ship this today!

£125.50

£104.58 Excl. 20% VAT

In stock

Micro Swiss NG Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

Zoom in

Description The NG Direct Drive Extruder from Micro Swiss is suitable for Creality CR-10 and Ender 3 printers. Thanks to the Bevel Gear design, the extruder has a short filament path of less than 41 mm. The placement of the motor allows for a very compact design with little overhang. This increases the rigidity of the system.

Further highlights:

Dual-gear drive made of hardened steel
3:1 gear ratio
Lightweight
Integrated with an all-metal hotend

This product contains:

Screws and wrenches
1x mounting plate
1x hot end
1x extension cable
1x Stepper Motor
1x Extruder Assembly
1x fan shroud

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR00798

£107.75

£89.79 Excl. 20% VAT

14 day delivery

Bondtech HeatLink 24v 50W heater

Zoom in

Description The Bondtech 24V 50W heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 24v 50W heater is compatible with most 3D printer hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Power rating:	50 W	Hazard class:	n/a
Voltage:	24 v	Our item no:	DBO00063
Brand:	Bondtech

Order now, we can ship this today!

£10.95

£9.13 Excl. 20% VAT

In stock

Bondtech Heatlink 12v 50W heater

Zoom in

Description The Bondtech 12V 50W heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 12v 50W heater is compatible with most 3D printer hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Power rating:	50 W	Hazard class:	n/a
Voltage:	12 v	Our item no:	DBO00064
Brand:	Bondtech

£10.95

£9.13 Excl. 20% VAT

14 day delivery

Micro Swiss coated heatbreak for E3D v6 hotends, 1.75mm

Zoom in

Description This stainless steel heatbreak from Micro Swiss is a direct replacement for the E3D v6 1.75mm hotends. It is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

Compatible with the following parts:
	●	All E3D v6 1.75mm Direct and Bowden hotends

Specifications

Material:	Stainless steel	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DMS00104
Brand:	Micro Swiss

£16.25

£13.54 Excl. 20% VAT

14 day delivery

Micro Swiss all metal hotend kit for Creality CR-6 SE (Max)

Zoom in

Description This all metal hotend set from Micro Swiss for the Creality CR-6 SE (Max) is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink eliminates the need for a heatbreak PTFE tube and thus ensures better heat dissipation.

The heatbreak is made of fifth-grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost x3 lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heatbreak
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
Silicone sock
Fastening parts

Compatible with the following printers:
● Creality CR-6 SE
● Creality CR-6 SE Max

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DMS00120

Order now, we can ship this today!

£65.50

£54.58 Excl. 20% VAT

In stock

Micro Swiss Heater Block with silicone sock for Creality CR-6 S

Zoom in

Description The Micro Swiss Heater Block with silicone sock is an upgrade for various Creality printers, among others.

Aluminum Heater Block
Silicone Sock
Allen key

Compatible with the following printers:

Creality CR-6 SE
CR-6 SE MAX
CR-10 Smart

Specifications

Material:	Aluminum	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR00914

£10.87 (sold out)

£9.06 Excl. 20% VAT

Micro Swiss high temperature MK8 heater block upgrade

Zoom in

Description The Micro Swiss heating block upgrade is made of a high-temperature copper-chrome-zirconium alloy allows you to reach temperatures of up to 500°C. This special alloy retains its strength at much higher temperatures compared to a normal copper alloy.

It is compatible with 100K thermistor, cartridge-style thermistors, thermocouple, PT100 and PT1000 sensors.

Specifications

Dimensions:	21 x 20 x 10 mm	Brand:	Micro Swiss
Material:	Copper	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DMS00122

Order now, we can ship this today!

£18.30

£15.25 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max / K1C

Zoom in

1
0

Description This FlowTech hotend is part of a new generation of hotends from Microswiss. Thanks to the unique design, known hotend problems are solved and you can get started without any worries. The hotend is leak-free and the nozzle can be easily changed. The all-metal design is of high quality and lasts a long time. In addition, the maximum temperature is 300 ˚ C and most 3D filaments can be used without any problems. This hotend is suitable for the K1, K1 Max and K1C 3D printers from Creality.

Specifications

Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01876
Brand:	Micro Swiss

Order now, we can ship this today!

£63.50

£52.92 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ Hotend for Creality CR-10 SE

Zoom in

Description This FlowTech hotend is part of a new generation of hotends from Microswiss. Thanks to the unique design, known hotend problems are solved and you can get started without any worries. The hotend is leak-free and the nozzle can be easily changed. The all-metal design is of high quality and lasts a long time. In addition, the maximum temperature is 300 ˚ C and most 3D filaments can be used without any problems. This hotend is suitable for the CR-10 SE 3D printer from Creality.

Specifications

Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01877
Brand:	Micro Swiss

£63.50 (sold out)

£52.92 Excl. 20% VAT

Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 KE

Zoom in

Description This FlowTech hotend is part of a new generation of hotends from Microswiss. Thanks to the unique design, known hotend problems are solved and you can get started without any worries. The hotend is leak-free and the nozzle can be easily changed. The all-metal design is of high quality and lasts a long time. In addition, the maximum temperature is 300 ˚ C and most 3D filaments can be used without any problems. This hotend is suitable for the Ender 3 V3 KE 3D printer from Creality.

Specifications

Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01878
Brand:	Micro Swiss

£63.50

£52.92 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 SE

Zoom in

1
0

Description Upgrade your 3D printer with this FlowTech hotend kit. This kit comes with a plug-and-play heater core and thermistor, so no additional firmware modifications are required. It also comes with a CR touch spacer and a custom part cooling fan duct. The all-metal design allows for printing with most filaments. The nozzle is leak-proof and easy to change. This hotend is compatible with the Ender 3 V3 SE 3D printer from Creality.

Specifications

Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01879
Brand:	Micro Swiss

£63.50

£52.92 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 / Ender 3 V3 Plus

Zoom in

1
0

Description Upgrade your 3D printer with this FlowTech hotend kit. This kit comes with a plug-and-play heater core and thermistor. The hotend is leak-proof and the nozzle can be easily changed. The full metal design is of high quality and will last a long time. In addition, the maximum temperature is 300 ˚ C and most 3D filaments can be used without any problems. This hotend is suitable for the Ender 3 V3 and Ender 3 V3 Plus 3D printers from Creality.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR01880

Order now, we can ship this today!

£66.50

£55.42 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ Hotend for ELEGOO Neptune 4 / 4 Pro

Zoom in

1
0

Description Upgrade your 3D printer with this FlowTech hotend kit. This kit comes with a plug-and-play heater core, thermistor and heatsink. The all-metal design is of high quality and will last a long time. In addition, the maximum temperature is 300 ˚ C and most 3D filaments can be used without any problems. This hotend is suitable for the Neptune 4 and Neptune 4 Pro 3D printers from Elegoo.

Specifications

Max temp:	300 °C	Brand:	Micro Swiss
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR01881

£68.10

£56.75 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ Hotend for ELEGOO Neptune 4 Plus / 4 Max

Zoom in

1
0

Description Upgrade your 3D printer with this FlowTech hotend kit. This kit comes with a plug-and-play heater core, thermistor and heatsink. The full metal design is of high quality and will last a long time. In addition, the maximum temperature is 300 ˚ C and most 3D filaments can be used without any problems. This hotend is suitable for the Neptune 4 Plus and the Neptune 4 Max from Elegoo.

Specifications

Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01882
Brand:	Micro Swiss

Order now, we can ship this today!

£66.30

£55.25 Excl. 20% VAT

In stock

Micro Swiss FlowTech™ CM2™ - Hardend Tip - Standard Flow - Hotend for Bambu Lab X1/X1C

Zoom in

Description This Microswiss FlowTech CM2 hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. Thanks to the sealed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab X1 and X1C. The package contains:

1x FlowTech™ Heater Core for Bambu Lab (X1-series)
1x Heatsink for Bambu Lab
1x FlowTech 0.4mm Nozzle (CM2™)
2x Titanium hotend mounting screws
1x Silicon Sock
2x Fan mounting shoulder screws
1x Printed Nozzle Changing Tool

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR02205
Brand:	Micro Swiss

£82.89 (sold out)

£69.08 Excl. 20% VAT

Micro Swiss FlowTech™ CM2™ CHT - Hardened Tip - High Flow - Hotend for Bambu Lab X1/X1C

Zoom in

Description This Microswiss FlowTech CM2 CHT hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. In combination with the Bondtech CHT High Flow Nozzles, the flow rate can even reach 50 mm/s. Thanks to the closed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, reducing the chance of damaging other parts and extending the lifespan of the hotend. This hotend is suitable for the Bambu Lab X1 and X1C. The package contains:

1x FlowTech™ Heater Core for Bambu Lab (X1-series)
1x Heatsink for Bambu Lab
1x FlowTech 0.4mm Nozzle (CM2™ CHT)
2x Titanium hotend mounting screws
1x Silicon Sock
2x Fan mounting shoulder screws
1x Printed Nozzle Changing Tool

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR02206
Brand:	Micro Swiss

£91.52 (sold out)

£76.27 Excl. 20% VAT

Micro Swiss FlowTech™ Brass Plated CHT - High Flow - Hotend for Bambu Lab X1/X1C

Zoom in

Description This Microswiss FlowTech Brass Plated CHT hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. In combination with the Bondtech FlowTech™ - Brass Plated Nozzle, the flow rate can even increase to 50 mm/s. Thanks to the closed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab X1 and X1C. The package contains:

1x FlowTech™ Heater Core for Bambu Lab (X1-series)
1x Heatsink for Bambu Lab
1x FlowTech™ - 0.4mm Brass Plated Nozzle
2x Titanium hotend mounting screws
1x Silicon Sock
2x Fan mounting shoulder screws
1x Printed Nozzle Changing Tool

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR02207
Brand:	Micro Swiss

£87.21 (sold out)

£72.68 Excl. 20% VAT

Micro Swiss FlowTech™ DiamondBack - Diamond Tip - Standard Flow - Hotend for Bambu Lab X1/X1C

Zoom in

Description This Microswiss FlowTech DiamondBack hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. Thanks to the sealed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab X1 and X1C. The package contains:

1x FlowTech™ Heater Core for Bambu Lab (X1 printers)
1x Heatsink for Bambu Lab
1x FlowTech 0.4mm Nozzle (DiamondBack)
2x Titanium hotend mounting screws
1x Silicon Sock
2x Fan mounting shoulder screws
1x Printed Nozzle Changing Tool

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR02208
Brand:	Micro Swiss

£174.45

£145.38 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ CM2™ - Hardend Tip - Standard Flow - Hotend for Bambu Lab P1P/P1S

Zoom in

Description This Microswiss FlowTech CM2 hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. Thanks to the sealed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains:

1x FlowTech™ Heater Core for Bambu Lab (P1-series)
1x Heatsink for Bambu Lab
1x FlowTech 0.4mm Nozzle (CM2™)
2x Titanium hotend mounting screws
1x Silicon Sock
2x Fan mounting shoulder screws
1x Printed Nozzle Changing Tool

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR02209
Brand:	Micro Swiss

£82.89 (sold out)

£69.08 Excl. 20% VAT

Micro Swiss FlowTech™ CM2™ CHT - Hardened Tip - High Flow - Hotend for Bambu Lab P1P/P1S

Zoom in

Description This Microswiss FlowTech CM2 CHT hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. In combination with the Bondtech CHT High Flow Nozzles, the print speed can even reach 50 mm/s. Thanks to the closed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains:

1x FlowTech™ Heater Core for Bambu Lab (P1-series)
1x Heatsink for Bambu Lab
1x FlowTech 0.4mm Nozzle (CM2™, CHT, CM2™ CHT, DiamondBack)
2x Titanium hotend mounting screws
1x Silicon Sock
2x Fan mounting shoulder screws
1x Printed Nozzle Changing Tool

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR02210
Brand:	Micro Swiss

£91.52

£76.27 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ Brass Plated CHT - High Flow - Hotend for Bambu Lab P1P/P1S

Zoom in

Description This Microswiss FlowTech Brass Plated CHT hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. In combination with the Bondtech FlowTech™ - Brass Plated Nozzle, the flow rate can even increase to 50 mm/s. Thanks to the closed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains:

1x FlowTech™ Heater Core for Bambu Lab (P1-series)
1x Heatsink for Bambu Lab
1x FlowTech™ - 0.4mm Brass Plated Nozzle
2x Titanium hotend mounting screws
1x Silicon Sock
2x Fan mounting shoulder screws
1x Printed Nozzle Changing Tool

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR02211
Brand:	Micro Swiss

£87.21

£72.68 Excl. 20% VAT

14 day delivery

Micro Swiss FlowTech™ DiamondBack - Diamond Tip - Standard Flow - Hotend for Bambu Lab P1P/P1S

Zoom in

Description This Microswiss FlowTech DiamondBack hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. Thanks to the sealed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains: