3D Printers, Filament & Tools | Best prices UK

Bondtech Heatlink Molex MX-50-57-9002 DBO00069

Description The Bondtech Heatlink JST MX-50-57-9002 is an adapter between thermistor or heater heatlink and the printer. The Heatlink is equipped with a standard Molex micro-fit 3.0 male connector and has a Molex type MX-50-57-9002 as a special connection.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Brand:	Bondtech	Hazard class:	n/a
Video instructions:	Instructional video	Our item no:	DBO00069

£4.60

£3.83 Excl. 20% VAT

Backorder - due January

Bondtech IFS extruder for Prusa mini

Zoom in

Description Upgrade your Prusa Mini/+ with this new filament sensor. The IFS extruder is designed to fit perfectly into the original Prusa Mini housing. This Bondtech IFS extruder is the successor to the Bondtech Dual Drive Extrusion Upgrade Kit (EXT-KIT-76).

The print head can be used with or without the filament sensor. The hardened steel Dual Drive gears give you more choice of materials to work with. This also allows you to work with abrasive materials, where this would otherwise wear out the gears of the original feeder. Another advantage of this IFS extruder is the adjustable tension. The thumb screw tensioner allows you to fine-tune the pressure the drive gears exert on the filament to suit your preferences or the type of material. Material changes can be carried out quickly and easily by activating the handy Quick-Release lever.

This upgrade kit includes:

x 1 Bondtech IFS extruder for the Prusa Mini
x 1 IFS magnet holder (PA12)
x 1 IFS lever (PA12)
x 1 extruder plug (HT-PLA)
x 3 Black Nylon Cable Ties
x 4 M3 x 35 + 1 x M3 x 12 black oxide steel screws
x 1 Brass Motor Gear
x 1 Thumbscrew Mount

Specifications

Material:	Nylon	Weight:	0.114 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00058

Order now, we can ship this today!

£65.50

£54.58 Excl. 20% VAT

In stock

Bondtech Prusa mini extruder upgrade to IFS

Zoom in

Description With these Bondtech parts you give the extruder of your Prusa Mini an FSI upgrade. Use the Bondtech Prusa Mini Extruder Upgrade Kit to make the original Prusa Mini extruder compatible with IFS. The kit allows the new filament sensor for Prusa Mini to be mounted in the Prusa Mini extruder.

The front housing of the IFS extruder for Prusa Mini contains a plug to hold the steel ball of the filament sensor which allows the extruder to be used without a filament sensor. Do you want to use the IFS extruder with the Prusa filament sensor? Then remove the connector and follow the instructions to install the necessary accessories.

This upgrade kit includes:

x 1 10076-3 front housing (PA12)
x 1 10076-4 IFS magnet holder (PA12)
x 1 10076-5 IFS handle (PA12)
x 1 15112 IFS extruder plug (HT-PLA)

Specifications

Material:	Nylon	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00059
Weight:	0.103 kg

Order now, we can ship this today!

£29.95

£24.96 Excl. 20% VAT

In stock

Bondtech QR mirrored extruder including motor and cable PC2510, 1.75mm

Zoom in

Description The mirrored Bondtech QR has a dual drive for hassle-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a great result. It is also possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. And thanks to the 'Quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 476.5 (1.75mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00001

£137.50

£114.58 Excl. 20% VAT

Backorder - due January

Bondtech QR extruder including motor and cable, 1.75mm

Zoom in

Description This Bondtech QR has a dual drive for trouble-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or create fast prints with large nozzles, you can always expect a great result. It is also possible to work with special filaments, such as nylon, carbon and flexible filament, thanks to the high reliability of the extruder. And thanks to the 'Quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 476.5 (1.75mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00000

£137.50

£114.58 Excl. 20% VAT

Backorder - due January

Bondtech QR mirrored extruder including motor and cable PC2510, 2.85/3.0mm

Zoom in

Description The mirrored Bondtech QR has a dual drive for hassle-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a great result. It is also possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. And thanks to the 'Quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 492.45 (2.85mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Filament diameter:	2.85 mm	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00003

£137.50

£114.58 Excl. 20% VAT

Backorder - due January

Bondtech QR extruder including motor and cable PC2510, 2.85/3.0mm

Zoom in

Description The Bondtech QR has a dual drive for trouble-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect an overwhelming result. It is also possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. Furthermore, thanks to the 'quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 492.45 (2.85mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Filament diameter:	2.85 mm	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00002

Order now, we can ship this today!

£137.50

£114.58 Excl. 20% VAT

In stock

Bondtech QR-M extruder, 1.75mm

Zoom in

Description

This Bondtech QR-M extruder is a compact powerhouse with hardened steel drive wheels and a 5:1 gear ratio. Print in high resolution with small nozzles or create fast prints with large nozzles. You can always expect an excellent result.

Thanks to the double drive, material is fed in without any problems and you are assured of good performance, reliability and high precision. The filament will not slip or wear out, allowing you to create perfect 3D prints.

In addition, this reliable QR-M extruder is very suitable for use with special filaments, such as nylon, carbon or flexible filament. Activate the handy 'quick-release' lever and easily change materials. The extruder is designed for 1.75mm filament.

The Bondtech QR-M is compatible with:

Mosquito
Mosquito Magnum
Mosquito Liquid
Mosquito Magnum+

E-step setting: 476.5 (1.75mm) steps/mm

Please note the extruder is supplied without the mount.

Data sheet (PDF)

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00041

Filament diameter:

Variant:

£144.50

£120.42 Excl. 20% VAT

Backorder - due January

Bondtech QR-M extruder, 2.85mm

Zoom in

Description

This Bondtech QR-M is a compact powerhouse with hardened steel drive wheels and a gear ratio of 5:1. Print in high resolution with small nozzles or create fast prints with large nozzles. You can always expect an excellent result.

Thanks to the dual drive, material is fed smoothly and you are assured of high performance, reliability and precision. The filament will not slip or wear out, allowing you to create perfect 3D prints.

In addition, this reliable QR-M extruder is very suitable for use with special filaments, such as nylon, carbon or flexible filament. Activate the handy 'quick-release' lever and easily change material. The extruder is designed for 2.85mm filament.

The Bondtech QR-M is compatible with:

Mosquito
Mosquito Magnum
Mosquito Liquid
Mosquito Magnum+

E-step setting: 492.45 (2.85mm) steps/mm

Please note the extruder is supplied without the mount.

Data sheet (PDF)

Specifications

Filament diameter:	2.85 mm	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00043

Filament diameter:

Variant:

£144.50

£120.42 Excl. 20% VAT

Backorder - due January

Bondtech QR-M mirrored extruder, 1.75mm

Zoom in

Description

This compact powerhouse has hardened steel drive wheels and a 5:1 gear ratio. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a crushing result.

Thanks to the dual drive, material is fed smoothly and you are assured of high performance, reliability and precision. The filament will not slip or wear out, allowing you to create perfect 3D prints.

In addition, this reliable QR-M extruder is very suitable for use with special filaments. Experiment with nylon, carbon or flexible filament. Activate the handy 'quick-release' lever and easily change material. The extruder is designed for 1.75mm filament.

The Bondtech QR-M is compatible with:

Mosquito
Mosquito Magnum
Mosquito Liquid
Mosquito Magnum+

E-step setting: 476.5 (1.75mm) steps/mm

Please note the extruder is supplied without the mounting mount.

Data sheet (PDF)

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00042

Filament diameter:

Variant:

£144.50

£120.42 Excl. 20% VAT

Backorder - due January

Bondtech QR-M mirrored extruder, 2.85mm

Zoom in

Description

This compact powerhouse has hardened steel drive wheels and a 5:1 gear ratio. Print in high resolution with small nozzles or create fast prints with large nozzles. You can always expect an excellent result.

Thanks to the dual drive, material is fed smoothly and you are assured of high performance, reliability and precision. The filament will not slip or wear out, allowing you to create perfect 3D prints.

In addition, this reliable QR-M extruder is very suitable for use with special filaments, such as nylon, carbon or flexible filament. Activate the handy 'quick-release' lever and easily change material. The extruder is designed for 2.85mm filament.

The Bondtech QR-M is compatible with:

Mosquito
Mosquito Magnum
Mosquito Liquid
Mosquito Magnum+

E-step setting: 492.45 (2.85mm) steps/mm

Please note the extruder is supplied without the mount.

Data sheet (PDF)

Specifications

Filament diameter:	2.85 mm	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00044

Filament diameter:

Variant:

£144.50

£120.42 Excl. 20% VAT

Backorder - due January

Bondtech HeatLink 24v 50W heater

Zoom in

Description The Bondtech 24V 50W heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 24v 50W heater is compatible with most 3D printer hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Power rating:	50 W	Hazard class:	n/a
Voltage:	24 v	Our item no:	DBO00063
Brand:	Bondtech

Order now, we can ship this today!

£10.95

£9.13 Excl. 20% VAT

In stock

Bondtech Heatlink 12v 50W heater

Zoom in

Description The Bondtech 12V 50W heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 12v 50W heater is compatible with most 3D printer hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Power rating:	50 W	Hazard class:	n/a
Voltage:	12 v	Our item no:	DBO00064
Brand:	Bondtech

£10.95

£9.13 Excl. 20% VAT

Backorder - due January

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.60mm

Zoom in

Description

This brass Bondtech CHT M6 nozzle has a nickel coating and is highly resistant to corrosion. The nozzle also produces less friction so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts and flows faster.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Material:	Brass	Brand:	Bondtech
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	0.6 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DBO00071
Quantity:	1

Nozzle diameter:

Order now, we can ship this today!

£17.25

£14.38 Excl. 20% VAT

In stock

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.80mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Material:	Brass	Brand:	Bondtech
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	0.8 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DBO00072
Quantity:	1

Nozzle diameter:

Order now, we can ship this today!

£17.25

£14.38 Excl. 20% VAT

In stock

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.00mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.0mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Material:	Brass	Brand:	Bondtech
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	1 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DBO00073
Quantity:	1

Nozzle diameter:

Order now, we can ship this today!

£17.25

£14.38 Excl. 20% VAT

In stock

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.40mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Material:	Brass	Brand:	Bondtech
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	1.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DBO00074
Quantity:	1

Nozzle diameter:

Order now, we can ship this today!

£17.25

£14.38 Excl. 20% VAT

In stock

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.80mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.8mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Material:	Brass	Brand:	Bondtech
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	1.8 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DBO00075
Quantity:	1

Nozzle diameter:

This product can be ordered 1 time(s).

Order now, we can ship this today!

£17.25

£14.38 Excl. 20% VAT

In stock

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.40mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Material:	Brass	Brand:	Bondtech
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DBO00076
Quantity:	1

Nozzle diameter:

Order now, we can ship this today!

£17.25

£14.38 Excl. 20% VAT

In stock

Bondtech CHT® coated brass nozzle M6, 1.75 x 0.50mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.5mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Material:	Brass	Brand:	Bondtech
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	0.5 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DBO00095
Quantity:	1

Nozzle diameter:

Order now, we can ship this today!

£17.25

£14.38 Excl. 20% VAT

In stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.4mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hotends/blocks:

BQ Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
BQ Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Material:	Brass	Brand:	Bondtech
Filament diameter:	1.75 mm	Nozzle type:	MK8
Nozzle diameter:	0.4 mm	Nozzle coating:	nickel plated
Screwthread type:	M6	Hazard class:	n/a
Quantity:	1	Our item no:	DBO00078

Nozzle diameter:

Order now, we can ship this today!

£17.25

£14.38 Excl. 20% VAT

In stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.6mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hotends/blocks:

BQ Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
BQ Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Material:	Brass	Brand:	Bondtech
Filament diameter:	1.75 mm	Nozzle type:	MK8
Nozzle diameter:	0.6 mm	Nozzle coating:	nickel plated
Screwthread type:	M6	Hazard class:	n/a
Quantity:	1	Our item no:	DBO00079

Nozzle diameter:

Order now, we can ship this today!

£17.25

£14.38 Excl. 20% VAT

In stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.8mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hotends/blocks:

BQ Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
BQ Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Material:	Brass	Brand:	Bondtech
Filament diameter:	1.75 mm	Nozzle type:	MK8
Nozzle diameter:	0.8 mm	Nozzle coating:	nickel plated
Screwthread type:	M6	Hazard class:	n/a
Quantity:	1	Our item no:	DBO00080

Nozzle diameter:

Order now, we can ship this today!

£17.25

£14.38 Excl. 20% VAT

In stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.0mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hotends/blocks:

BQ Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
BQ Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Material:	Brass	Brand:	Bondtech
Filament diameter:	1.75 mm	Nozzle type:	MK8
Nozzle diameter:	1 mm	Nozzle coating:	nickel plated
Screwthread type:	M6	Hazard class:	n/a
Quantity:	1	Our item no:	DBO00081