Motherboards Electronics 3D printer parts MLE Megatronics Leapfrog Creatr / Creatr XL Controller Board 123-3d.co.uk

Quantity	Product
No products
Total: £0.00

Creality 3D Silent Mainboard v4.2.7 DRW00068

Description With this motherboard you can easily upgrade your Creality 3D printer. You only replace the motherboard within a few minutes, after which you can immediately start working with your improved 3D printer!

This upgrade improves the following performance:

The motherboard with TMC2225 driver makes your printer run a lot quieter
+50% printing precision
-40% power consumption

Other characteristics:

MCU 32 bit
Easy installation of your Antclabs BLTouch Leveling Sensor
Bootloader installed (ISP/USB Arduino)
Firmware 4.2.7 is preinstalled on this board
The board is pre-installed for the Ender-3, but also suitable for the Ender-3 V2, Ender-3 Pro and Ender 5.

CAUTION: Always install the latest firmware for your printer.

Please note we do not offer support on the installation of this product.

Specifications

On-board stepper drivers:	4	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DRW00068

Order now, we can ship this today!

£46.95 (Incl. 20% VAT) (£39.13 Excl. 20% VAT)

In stock

BigTreeTech Octopus Pro (F446)

Zoom in

Description A beast of a plate! The BigTreeTech Octopus V1.0 Pro is equipped with a powerful 32-bit ARM microprocessor that is supported by Klipper, ReprapFirmware and Marlin software. With 8 slots for control modules of stepper motors, not only multiple extruders, but also a bed plate, for example, can be leveled at three points.

In terms of expansion options, the Octopus V1.0 Pro offers a lot of space. You can install an automatic bed height sensor, LCD screens and WIFI. There are connections for 5 thermistors, 4 heating elements, a heated bed and 6 PWM fans.

The eight slots for stepper motor control are Pololu-compatible and can be set up for SPI and UART communication. You can choose per slot with a jumper whether you want to use the separate power supply for stepper drivers. This allows you to supply up to 60 Volts to the stepper motor control, although the module must of course be able to handle this. The TMC5160, for example, is a good option for this, as you can safely operate it on 48V for extra fast movements.

Specifications

Dimensions:	160 x 100 mm	Brand:	BigTreeTech
Operating volt logic:	3.3V	Chip:	STM32F446ZE
Input voltage:	-	Hazard class:	n/a
Processor:	ARM CORTEX M4	Stepper driver slots:	8
No of thermistors:	5	Our item no:	DAR00923

Order now, we can ship this today!

£71.25 (Incl. 20% VAT) (£59.38 Excl. 20% VAT)

In stock

Anycubic Photon mainboard

Zoom in

Description Mainboard for the Anycubic Photon LCD 3D printer.

Specifications

Brand:	Anycubic	Our item no:	DRO00054
Hazard class:	n/a

£74.50 (Incl. 20% VAT) (£62.08 Excl. 20% VAT)

14 day delivery

Anycubic Photon S mainboard

Zoom in

Description Mainboard for the Anycubic Photon S 3D printer.

Specifications

Brand:	Anycubic	Our item no:	DRO00057
Hazard class:	n/a

£95.95 (sold out) (Incl. 20% VAT) (£79.96 Excl. 20% VAT)

BigTreeTech RRF E3 v1.1 32-bit mainboard

Zoom in

Description

With this motherboard from Bigtreetech you can easily upgrade your 3D printer.

The RRF E3 v1.1 is equipped with a USB connection and four motor driver interfaces: XM, YM, ZAM, ZBM, EM. You can easily expand the interface to include a filament detection function, a resume printing function, BLTouch for automatic bed leveling and RGB light. In addition, you can connect the automatic shutdown module so that your 3D printer turns off automatically after the print is completed.

The mainboard has a size of 103.75mm x 75.25mm and is compatible with the Ender 3, Ender 3 Pro, Ender 5 and CR10.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	100.75 x 70.25 mm	Brand:	BigTreeTech
Operating volt logic:	3.3V	Network:	WiFi
Input voltage:	12-24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Printer has USB:	yes
On-board stepper drivers:	5	Our item no:	DAR00450

Order now, we can ship this today!

£56.95 (Incl. 20% VAT) (£47.46 Excl. 20% VAT)

In stock

BigTreeTech Manta M5P Control Board

Zoom in

Description The Manta M5P from BigTreeTech offers ultimate 3D printing experiences and is optimized for use in combination with the popular Klipper software for effortless control of up to five stepper motors.

Thanks to the many expansion options of the Manta M5P, you can fully customize your 3D printer to your wishes. In addition to the LAN port, two HDMI ports, 3x USB 2.0 and USB type-C port, there are headers for connecting LCD screens, an automatic bed leveling sensor, 3 thermistors and two heating elements next to the heated bed. The 40-pin GPIO header, CAN and SPI headers enable further expansion. If you use stepper motor control that supports higher voltages, you can set the M5P per driver to use 24-56V from the HV-IN port.

This control board is a good choice to replace the current electronics in your Ender-3, Voron V0 etc.

Note: You need the Raspberry CM4 or CB1 module from BigTreeTech, which is sold separately. The HDMI output only works with the CM4 module.

Specifications

Operating volt logic:	3.3V	Network:	work ethernet WiFi
Input voltage:	12-24V	Hazard class:	n/a
No of thermistors:	3	Printer has USB:	yes
Brand:	BigTreeTech	Stepper driver slots:	5
USB version:	USB 2.0	Our item no:	DAR01023

Order now, we can ship this today!

£61.20 (Incl. 20% VAT) (£51.00 Excl. 20% VAT)

In stock

BigTreeTech Manta M8P Control Board

Zoom in

Description With the M8P from the Manta series from BigTreeTech you can achieve ultimate 3D printing experiences! The board is optimized for use in combination with the popular Klipper software for effortless control of up to eight stepper motors.

Thanks to the many expansion options of the Manta M8P, you can fully customize your 3D printer to your wishes. In addition to the LAN port, two HDMI ports, 3x USB 2.0 and USB type-C port, there are headers for connecting LCD screens, an automatic bed leveling sensor, 5 fans, 5 thermistors and 4 heating elements next to the heated bed. The 40-pin GPIO header, CAN and SPI headers enable further expansion. If you use stepper motor control that supports higher voltages, you can set the M8P per driver to use 24-56V from the HV-IN port.

This control board is a good choice to replace the current electronics in your VzBot, Voron V2.4 etc.

Note: You need the Raspberry CM4 or CB1 module from BigTreeTech, which is sold separately. The HDMI1 output only works with the CM4 module.

Specifications

Operating volt logic:	3.3V	Network:	work ethernet WiFi
Input voltage:	12-24V	Hazard class:	n/a
No of thermistors:	5	Printer has USB:	yes
Brand:	BigTreeTech	Stepper driver slots:	8
USB version:	USB 2.0	Our item no:	DAR01024

Order now, we can ship this today!

£69.95 (Incl. 20% VAT) (£58.29 Excl. 20% VAT)

In stock

BigTreeTech SKR 2 mainboard ARM

Zoom in

Description With this motherboard from Bigtreetech you can easily upgrade your 3D printer.

The SKR 2 is equipped with a USB connection and five motor driver interfaces: X, Y, Z, E0 and E1. The board has a size of 90mm x 70mm and is equipped with a powerful 32-bit processor that supports various drivers such as the TMC2208, TMC2130, TMC5160, TMC2209, TMC2225, LV8729, DRV8825, A4988, ST820 and more.

Technical information (PDF)

Note: This product is Rev B.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	110 x 85 mm	Brand:	BigTreeTech
Input voltage:	12-24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Our item no:	DAR00479

Order now, we can ship this today!

£59.95 (Incl. 20% VAT) (£49.96 Excl. 20% VAT)

In stock

BigTreeTech SKR mini E3 v3.0 32-bit mainboard

Zoom in

Description With this motherboard from Bigtreetech you can easily upgrade your 3D printer.

The SKR Mini E3 v3.0 is equipped with a micro USB connection and five motor driver interfaces: XM, YM, ZAM, ZBM and EM. You can easily expand the interface with a heated bed module, a filament detection function, a resume printing function, a touchscreen or the BLTouch for automatic bed leveling. In addition, you can also connect the automatic shutdown module so that your printer switches off automatically after your print is completed.

The board has a size of 103.75mm x 70.25mm and is equipped with a powerful 32-bit processor with a TMC2209 driver, the drivers have a RET6 chip.

Ideal to replace the Ender-3 V2 motherboard.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	103.75 x 70.25 mm	Brand:	BigTreeTech
Input voltage:	12-24V	Network:	no
Processor:	ARM CORTEX M3	Hazard class:	n/a
On-board stepper drivers:	4	Our item no:	DAR00690

Order now, we can ship this today!

£47.25 (Incl. 20% VAT) (£39.38 Excl. 20% VAT)

In stock

BigTreeTech Octopus v1.1 control board

Zoom in

Description The board for building your Voron V2.4, but the BigTreeTech Octopus V1.1 is of course also a good choice for other 3D printer models! This electronics board is equipped with a powerful 32-bit ARM microprocessor that is supported by both Klipper and Marlin software. With 8 slots for control modules of stepper motors, not only multiple extruders, but also a bed plate, for example, can be leveled at three points.

The Octopus V1.1 also offers a lot of space in terms of expansion options. You can install an automatic bed height sensor, LCD screens and WIFI. There are connections for 5 thermistors, 4 heating elements, a heated bed and 6 PWM fans. The eight slots for stepper motor control are Pololu-compatible and can be set up for SPI and UART communication.

Note: It is recommended to connect the board to 24V

Specifications

Dimensions:	160 x 100 mm	Chip:	STM32F446ZET6
Input voltage:	24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Stepper driver slots:	8
No of thermistors:	5	Our item no:	DAR00922
Brand:	BigTreeTech

£58.10 (Incl. 20% VAT) (£48.42 Excl. 20% VAT)

14 day delivery

Creality 3D CR-200B motherboard

Zoom in

Description This Creality 3D CR-200B motherboard is to replace the original motherboard. It is compatible with Creality 3D CR-200B printers.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	155 x 115 x 45 mm	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR00583
Weight:	0.71 kg

Order now, we can ship this today!

£91.50 (Incl. 20% VAT) (£76.25 Excl. 20% VAT)

In stock

Creality 3D Ender-3 (Pro) mainboard v4.2.2

Zoom in

Description Can also be used for the following printers:
- Creality 3D Ender-5

Specifications

On-board stepper drivers:	4	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DRW00033

£62.50 (sold out) (Incl. 20% VAT) (£52.08 Excl. 20% VAT)

GEEETECH GT2560 v4.0 Mainboard for A20 series Printers

Zoom in

Description

The GEEETECH mainboard is easy to assemble and operate. It is equipped with an ATMEGA2560 chip, is compatible with an input voltage of 12V/24V and comes with an interface for the heatbed. In addition, the mainboard is equipped with two interfaces for fans and one interface for LED light. It is powered by an A4988 single or multiple extruder stepper motor driver. You can expand the board with an LCD screen and an SD card.

Please note: GEEETECH's V4.0 board is a replacement for the original A20 series board. It cannot replace other boards such as V4.1B, V3.0, V3.1 etc.

Please note we do not offer support on the installation of this product.

Specifications

Input voltage:	12-24V	Stepper driver slots:	4
Brand:	Geeetech	Our item no:	DAR00459
Hazard class:	n/a

Order now, we can ship this today!

£52.50 (Incl. 20% VAT) (£43.75 Excl. 20% VAT)

In stock

GEEETECH Smartto mainboard for A30 Pro Printer

Zoom in

Description Original Smartto mainboard for your GEEETECH A30 Pro printer.

Note: the mainboard is only suitable if it exactly matches the original mainboard of your A30 Pro printer.

Specifications

External stepper drivers:	7	Hazard class:	n/a
Brand:	Geeetech	Our item no:	DAR00462

£56.95 (Incl. 20% VAT) (£47.46 Excl. 20% VAT)

14 day delivery

Voxelab mainboard

Zoom in

Description Original motherboard for your Voxelab 3D printer.
The motherboard is equipped with silent stepper drivers.

Specifications

Voltage:	24 v	Hazard class:	n/a
Brand:	Voxelab	Our item no:	DAR00488

£56.95 (Incl. 20% VAT) (£47.46 Excl. 20% VAT)

14 day delivery

Wrecklab PrintHat v2

Zoom in

Description Looking for smooth operation of your 3D printer and extra accuracy when printing?

Introducing the Wrecklab PrintHAT 2 – designed to give you the smoothest and best performance possible. This compact and reliable daughterboard for the Raspberry Pi is smarter, faster and better than its predecessor.

With the PrintHAT 2 you can turn the Raspberry Pi into a powerful controller for 3D printers and small CNC machines. The smart system runs complex computational algorithms on Raspberry PI's powerful CPU, leaving only time-critical tasks to the integrated MCU. As a result, you not only print faster, but also quieter and more accurately.

The main features

A powerful 32-bit processor.
5 state-of-the-art TRINAMICS TMC2209 step drivers.
5 x PWM load.
Improved end stop accuracy via stepper phase detection.
9 configurable IOs.
Sensorless homing.
Extremely quiet operation and smooth movement via StealthChop.
3x 12-bit ADC input.

For beginners and experienced users
The improved installation package makes installation a breeze for beginners or users moving from one controller to another. In addition, there are still more than enough options for the requirements of more experienced users.

Support
The daughterboard supports Klipper, OctoPrint and Mainsails and is suitable for 3D printers, CNC machines and other machines powered by a stepper motor.

Specifications

Brand:	Wrecklab	Our item no:	DAR00354
Hazard class:	n/a

£86.59 (Incl. 20% VAT) (£72.16 Excl. 20% VAT)

14 day delivery

Anycubic Photon Mono Motherboard

Zoom in

Description Original Anycubic mainboard for the Anycubic Photon Mono 3D printer. With this motherboard you can replace the defective board of your printer in no time.

Specifications

Brand:	Anycubic	Our item no:	DAR00502
Hazard class:	n/a

£39.00 (Incl. 20% VAT) (£32.50 Excl. 20% VAT)

14 day delivery

Creality 3D CR-30 PCBA motherboard

Zoom in

Description This Creality 3D CR-30 PCBA motherboard is to replace the original motherboard. It is compatible with Creality 3D CR-30 printers.

Specifications

On-board stepper drivers:	4	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR00525

This product can be ordered 1 time(s).

Order now, we can ship this today!

£63.00 (Incl. 20% VAT) (£52.50 Excl. 20% VAT)

In stock

Creality 3D Halot Sky CL-89 mainboard

Zoom in

Description This mainboard is to replace the original mainboard. It is compatible with Creality 3D Halot Sky CL-89 printers.

Specifications

Brand:	Creality 3D	Our item no:	DAR00841
Hazard class:	n/a

£118.00 (sold out) (Incl. 20% VAT) (£98.33 Excl. 20% VAT)

BigTreeTech Octopus Max EZ

Zoom in

Description If you can't get enough of stepper motors, the BigTreeTech Octopus Max EZ offers a phenomenal TEN slots for EZ series stepper motor drive modules. Useful if, for example, you want to build a multi-material station and control it directly from your 3D printer.

The Octopus Max EZ has a powerful 32-bit microprocessor that runs at 550Mhz. In addition, numerous expansions are possible thanks to the CAN, automatic bed leveling sensor, LCD, RGB and FWS ports. The Octopus Max supports 7 fans, 4 heating elements, 5 thermistors and 6 end stops. Optionally you can install a WIFI module for network communication. For extra performance, if your stepper motor driver supports it, up to 56V can be supplied via a jumper setting that can be set per driver.

Specifications

Input voltage:	12-24V	Chip:	STM32H723ZET6
Processor:	-	Hazard class:	n/a
No of thermistors:	5	Stepper driver slots:	10
Brand:	BigTreeTech	Our item no:	DAR01028

Order now, we can ship this today!

£87.75 (Incl. 20% VAT) (£73.13 Excl. 20% VAT)

In stock

BigTreeTech Octopus Pro (F429)

Zoom in

2
1
0

Description With the BigTreeTech Octopus Pro (F429) you choose a very stable and safe 3D printer motherboard. It supports Raspberry Pi and Octoprint operating systems and Klipper, Marlin and RRF firmware. The firmware can be updated via DFU mode, where the firmware does not require a bootloader, but is sent directly to the board from the PC. The Octopus Pro has several versions of MCUs, so you can choose the one that suits your needs. It is equipped with a 32-bit ARM-level Cortex-M4 series STM32H723ZET6/ STM32F407ZET6 / STM32F429ZGT6 / STM32F446ZET6 chip. The frequency goes up to 168 MHz and the flash is 1 MB.

Other functionalities

8 powerful motor drives for a more stable unit
8 isolation chips that protect the motherboard and a motherboard protective level conversion chip that converts a 3.3 V signal into a 5 V signal
STEP/DIR mode, UART mode and A-SPI mode
Connect 6 CNC fans and 2 normal fans
Compatible with NTC100K & PT100/PT1000 high temperature
Supports up to 60 V
Supports proximity sensors, jumper optional pull-up resistor and BL touch
USB Type-C connection

Specifications

Dimensions:	160 x 100 mm	Flash memory:	-
Operating volt logic:	3.3V	Brand:	BigTreeTech
Operating volt vmot:	-	Chip:	STM32F446ZE
Input voltage:	-	Hazard class:	n/a
Processor:	ARM CORTEX M4	Stepper driver slots:	8
No of thermistors:	4	Our item no:	DAR01181

Order now, we can ship this today!

£64.00 (Incl. 20% VAT) (£53.33 Excl. 20% VAT)

In stock

BigTreeTech Octopus Pro v1.1 (H723)

Zoom in

2
1
0

Description With the BigTreeTech Octopus Pro v1.1 (H723) you choose a very stable and safe 3D printer motherboard. It supports Raspberry Pi and Octoprint operating systems and Klipper, Marlin and RRF firmware. The firmware can be updated via DFU mode, where the firmware does not require a bootloader, but is sent directly to the board from the PC. The Octopus Pro has several versions of MCUs, so you can choose the one that suits your needs. It is equipped with a 32-bit ARM-level Cortex-M4 series STM32H723ZET6/ STM32F407ZET6 / STM32F429ZGT6 / STM32F446ZET6 chip. The frequency goes up to 168 MHz and the flash is 1 MB.

Other functionalities

8 powerful motor drives for a more stable unit
8 isolation chips that protect the motherboard and a motherboard protective level conversion chip that converts a 3.3 V signal into a 5 V signal
STEP/DIR mode, UART mode and an SPI mode
Connect 6 CNC fans and 2 normal fans
Compatible with NTC100K & PT100/PT1000 high temperature
Supports up to 60 V - Supports proximity sensors, jumper optional pull-up resistor and BL touch
USB Type-C connection

Specifications

Dimensions:	160 x 100 mm	Flash memory:	-
Operating volt logic:	3.3V	Brand:	BigTreeTech
Operating volt vmot:	-	Chip:	STM32H723ZE
Input voltage:	12-24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Stepper driver slots:	8
No of thermistors:	4	Our item no:	DAR01182

£97.75 (Incl. 20% VAT) (£81.46 Excl. 20% VAT)

14 day delivery

Creality 3D Ender-3 V3 SE Mainboard

Zoom in

3
2
1
0

Description This motherboard is specially designed for the Ender-3 V3 SE 3D printer from Creality 3D. It is an original part of Creality and is therefore fully compatible.

Specifications

Voltage:	24 v	Printer has USB:	yes
On-board stepper drivers:	4	Our item no:	DAR01251
Brand:	Creality 3D	Replaces item no:	DAR01404
Hazard class:	n/a

£46.50 (Incl. 20% VAT) (£38.75 Excl. 20% VAT)

14 day delivery

Creality 3D CR-M4 Silent Mainboard

Zoom in

2
1
0

Description This CR-M4 Silent Mainboard from Creality 3D is an original replacement part for your 3D printer. It is an almost silent motherboard that you can use in combination with your 3D printer. The board is equipped with an ultra-quiet TMC2209 motor driver and an STM32F401VET6 microcontroller. This motherboard is compatible with the CR-M4 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Hazard class:	n/a
Weight:	0.113 kg	Our item no:	DAR01395

£92.50 (Incl. 20% VAT) (£77.08 Excl. 20% VAT)

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Popular products

Motherboards

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Newsletter

Popular products

Motherboards