Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000s of products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 01270 433 123
E: info@123-3D.co.uk
Free delivery over £30

Top Rated Seller

Payment options

Lots of popular payment options!

Follow us on social media

Official dealer

Official Prusa dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Motherboards

Creality 3D Silent Mainboard v4.2.7

Creality 3D Silent Mainboard v4.2.7 DRW00068

Description With this motherboard you can easily upgrade your Creality 3D printer. You only replace the motherboard within a few minutes, after which you can immediately start working with your improved 3D printer!

This upgrade improves the following performance:

The motherboard with TMC2225 driver makes your printer run a lot quieter
+50% printing precision
-40% power consumption

Other characteristics:

MCU 32 bit
Easy installation of your Antclabs BLTouch Leveling Sensor
Bootloader installed (ISP/USB Arduino)
Firmware 4.2.7 is preinstalled on this board
The board is pre-installed for the Ender-3, but also suitable for the Ender-3 V2, Ender-3 Pro and Ender 5.

CAUTION: Always install the latest firmware for your printer.

Please note we do not offer support on the installation of this product.

Specifications

On-board stepper drivers:	4	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DRW00068

Order now, we can ship this today!

£46.95

£39.13 Excl. 20% VAT

In stock

BigTreeTech Octopus Pro (F446)

BigTreeTech Octopus Pro (F446) DAR00923

Description A beast of a plate! The BigTreeTech Octopus V1.0 Pro is equipped with a powerful 32-bit ARM microprocessor that is supported by Klipper, ReprapFirmware and Marlin software. With 8 slots for control modules of stepper motors, not only multiple extruders, but also a bed plate, for example, can be leveled at three points.

In terms of expansion options, the Octopus V1.0 Pro offers a lot of space. You can install an automatic bed height sensor, LCD screens and WIFI. There are connections for 5 thermistors, 4 heating elements, a heated bed and 6 PWM fans.

The eight slots for stepper motor control are Pololu-compatible and can be set up for SPI and UART communication. You can choose per slot with a jumper whether you want to use the separate power supply for stepper drivers. This allows you to supply up to 60 Volts to the stepper motor control, although the module must of course be able to handle this. The TMC5160, for example, is a good option for this, as you can safely operate it on 48V for extra fast movements.

Specifications

Dimensions:	160 x 100 mm	Brand:	BigTreeTech
Operating volt logic:	3.3V	Chip:	STM32F446ZE
Input voltage:	-	Hazard class:	n/a
Processor:	ARM CORTEX M4	Stepper driver slots:	8
No of thermistors:	5	Our item no:	DAR00923

This product can be ordered 1 time(s).

Order now, we can ship this today!

£71.25

£59.38 Excl. 20% VAT

In stock

BigTreeTech RRF E3 v1.1 32-bit mainboard

BigTreeTech RRF E3 v1.1 32-bit mainboard DAR00450

Description

With this motherboard from Bigtreetech you can easily upgrade your 3D printer.

The RRF E3 v1.1 is equipped with a USB connection and four motor driver interfaces: XM, YM, ZAM, ZBM, EM. You can easily expand the interface to include a filament detection function, a resume printing function, BLTouch for automatic bed leveling and RGB light. In addition, you can connect the automatic shutdown module so that your 3D printer turns off automatically after the print is completed.

The mainboard has a size of 103.75mm x 75.25mm and is compatible with the Ender 3, Ender 3 Pro, Ender 5 and CR10.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	100.75 x 70.25 mm	Brand:	BigTreeTech
Operating volt logic:	3.3V	Network:	WiFi
Input voltage:	12-24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Printer has USB:	yes
On-board stepper drivers:	5	Our item no:	DAR00450

Order now, we can ship this today!

£56.95

£47.46 Excl. 20% VAT

In stock

BigTreeTech Manta M5P Control Board

BigTreeTech Manta M5P Control Board DAR01023

Description The Manta M5P from BigTreeTech offers ultimate 3D printing experiences and is optimized for use in combination with the popular Klipper software for effortless control of up to five stepper motors.

Thanks to the many expansion options of the Manta M5P, you can fully customize your 3D printer to your wishes. In addition to the LAN port, two HDMI ports, 3x USB 2.0 and USB type-C port, there are headers for connecting LCD screens, an automatic bed leveling sensor, 3 thermistors and two heating elements next to the heated bed. The 40-pin GPIO header, CAN and SPI headers enable further expansion. If you use stepper motor control that supports higher voltages, you can set the M5P per driver to use 24-56V from the HV-IN port.

This control board is a good choice to replace the current electronics in your Ender-3, Voron V0 etc.

Note: You need the Raspberry CM4 or CB1 module from BigTreeTech, which is sold separately. The HDMI output only works with the CM4 module.

Specifications

Operating volt logic:	3.3V	Network:	work ethernet WiFi
Input voltage:	12-24V	Hazard class:	n/a
No of thermistors:	3	Printer has USB:	yes
Brand:	BigTreeTech	Stepper driver slots:	5
USB version:	USB 2.0	Our item no:	DAR01023

Order now, we can ship this today!

£61.20

£51.00 Excl. 20% VAT

In stock

BigTreeTech SKR 2 mainboard ARM

BigTreeTech SKR 2 mainboard ARM DAR00479

Description With this motherboard from Bigtreetech you can easily upgrade your 3D printer.

The SKR 2 is equipped with a USB connection and five motor driver interfaces: X, Y, Z, E0 and E1. The board has a size of 90mm x 70mm and is equipped with a powerful 32-bit processor that supports various drivers such as the TMC2208, TMC2130, TMC5160, TMC2209, TMC2225, LV8729, DRV8825, A4988, ST820 and more.

Technical information (PDF)

Note: This product is Rev B.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	110 x 85 mm	Brand:	BigTreeTech
Input voltage:	12-24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Our item no:	DAR00479

£55.00

(sold out)

£45.83 Excl. 20% VAT

BigTreeTech SKR mini E3 v3.0 32-bit mainboard

BigTreeTech SKR mini E3 v3.0 32-bit mainboard DAR00690

Description With this motherboard from Bigtreetech you can easily upgrade your 3D printer.

The SKR Mini E3 v3.0 is equipped with a micro USB connection and five motor driver interfaces: XM, YM, ZAM, ZBM and EM. You can easily expand the interface with a heated bed module, a filament detection function, a resume printing function, a touchscreen or the BLTouch for automatic bed leveling. In addition, you can also connect the automatic shutdown module so that your printer switches off automatically after your print is completed.

The board has a size of 103.75mm x 70.25mm and is equipped with a powerful 32-bit processor with a TMC2209 driver, the drivers have a RET6 chip.

Ideal to replace the Ender-3 V2 motherboard.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	103.75 x 70.25 mm	Brand:	BigTreeTech
Input voltage:	12-24V	Network:	no
Processor:	ARM CORTEX M3	Hazard class:	n/a
On-board stepper drivers:	4	Our item no:	DAR00690

Order now, we can ship this today!

£39.00

£32.50 Excl. 20% VAT

In stock

BigTreeTech Octopus v1.1 control board

BigTreeTech Octopus v1.1 control board DAR00922

Description The board for building your Voron V2.4, but the BigTreeTech Octopus V1.1 is of course also a good choice for other 3D printer models! This electronics board is equipped with a powerful 32-bit ARM microprocessor that is supported by both Klipper and Marlin software. With 8 slots for control modules of stepper motors, not only multiple extruders, but also a bed plate, for example, can be leveled at three points.

The Octopus V1.1 also offers a lot of space in terms of expansion options. You can install an automatic bed height sensor, LCD screens and WIFI. There are connections for 5 thermistors, 4 heating elements, a heated bed and 6 PWM fans. The eight slots for stepper motor control are Pololu-compatible and can be set up for SPI and UART communication.

Note: It is recommended to connect the board to 24V

Specifications

Dimensions:	160 x 100 mm	Chip:	STM32F446ZET6
Input voltage:	24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Stepper driver slots:	8
No of thermistors:	5	Our item no:	DAR00922
Brand:	BigTreeTech

Order now, we can ship this today!

£58.10

£48.42 Excl. 20% VAT

In stock

Creality 3D CR-200B motherboard

Creality 3D CR-200B motherboard DAR00583

Description This Creality 3D CR-200B motherboard is to replace the original motherboard. It is compatible with Creality 3D CR-200B printers.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	155 x 115 x 45 mm	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR00583
Weight:	0.71 kg

This product can be ordered 1 time(s).

Order now, we can ship this today!

£91.50

£76.25 Excl. 20% VAT

In stock

GEEETECH GT2560 v4.0 Mainboard for A20 series Printers

GEEETECH GT2560 v4.0 Mainboard for A20 series Printers DAR00459

Description

The GEEETECH mainboard is easy to assemble and operate. It is equipped with an ATMEGA2560 chip, is compatible with an input voltage of 12V/24V and comes with an interface for the heatbed. In addition, the mainboard is equipped with two interfaces for fans and one interface for LED light. It is powered by an A4988 single or multiple extruder stepper motor driver. You can expand the board with an LCD screen and an SD card.

Please note: GEEETECH's V4.0 board is a replacement for the original A20 series board. It cannot replace other boards such as V4.1B, V3.0, V3.1 etc.

Please note we do not offer support on the installation of this product.

Specifications

Input voltage:	12-24V	Stepper driver slots:	4
Brand:	Geeetech	Our item no:	DAR00459
Hazard class:	n/a

Order now, we can ship this today!

£52.50

£43.75 Excl. 20% VAT

In stock

GEEETECH Smartto mainboard for A30 Pro Printer

GEEETECH Smartto mainboard for A30 Pro Printer DAR00462

Description Original Smartto mainboard for your GEEETECH A30 Pro printer.

Note: the mainboard is only suitable if it exactly matches the original mainboard of your A30 Pro printer.

Specifications

External stepper drivers:	7	Hazard class:	n/a
Brand:	Geeetech	Our item no:	DAR00462

£56.95

£47.46 Excl. 20% VAT

14 day delivery

Wrecklab PrintHat v2

Wrecklab PrintHat v2 DAR00354

Description Looking for smooth operation of your 3D printer and extra accuracy when printing?

Introducing the Wrecklab PrintHAT 2 – designed to give you the smoothest and best performance possible. This compact and reliable daughterboard for the Raspberry Pi is smarter, faster and better than its predecessor.

With the PrintHAT 2 you can turn the Raspberry Pi into a powerful controller for 3D printers and small CNC machines. The smart system runs complex computational algorithms on Raspberry PI's powerful CPU, leaving only time-critical tasks to the integrated MCU. As a result, you not only print faster, but also quieter and more accurately.

The main features

A powerful 32-bit processor.
5 state-of-the-art TRINAMICS TMC2209 step drivers.
5 x PWM load.
Improved end stop accuracy via stepper phase detection.
9 configurable IOs.
Sensorless homing.
Extremely quiet operation and smooth movement via StealthChop.
3x 12-bit ADC input.

For beginners and experienced users
The improved installation package makes installation a breeze for beginners or users moving from one controller to another. In addition, there are still more than enough options for the requirements of more experienced users.

Support
The daughterboard supports Klipper, OctoPrint and Mainsails and is suitable for 3D printers, CNC machines and other machines powered by a stepper motor.

Specifications

Brand:	Wrecklab	Our item no:	DAR00354
Hazard class:	n/a

£86.59

£72.16 Excl. 20% VAT

14 day delivery

Anycubic Photon Mono Motherboard

Anycubic Photon Mono Motherboard DAR00502

Description Original Anycubic mainboard for the Anycubic Photon Mono 3D printer. With this motherboard you can replace the defective board of your printer in no time.

Specifications

Brand:	Anycubic	Our item no:	DAR00502
Hazard class:	n/a

£39.00

£32.50 Excl. 20% VAT

14 day delivery

Creality 3D CR-30 PCBA motherboard

Creality 3D CR-30 PCBA motherboard DAR00525

Description This Creality 3D CR-30 PCBA motherboard is to replace the original motherboard. It is compatible with Creality 3D CR-30 printers.

Specifications

On-board stepper drivers:	4	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR00525

Order now, we can ship this today!

£63.00

£52.50 Excl. 20% VAT

In stock

BigTreeTech Octopus Max EZ

BigTreeTech Octopus Max EZ DAR01028

Description If you can't get enough of stepper motors, the BigTreeTech Octopus Max EZ offers a phenomenal TEN slots for EZ series stepper motor drive modules. Useful if, for example, you want to build a multi-material station and control it directly from your 3D printer.

The Octopus Max EZ has a powerful 32-bit microprocessor that runs at 550Mhz. In addition, numerous expansions are possible thanks to the CAN, automatic bed leveling sensor, LCD, RGB and FWS ports. The Octopus Max supports 7 fans, 4 heating elements, 5 thermistors and 6 end stops. Optionally you can install a WIFI module for network communication. For extra performance, if your stepper motor driver supports it, up to 56V can be supplied via a jumper setting that can be set per driver.

Specifications

Input voltage:	12-24V	Chip:	STM32H723ZET6
Processor:	-	Hazard class:	n/a
No of thermistors:	5	Stepper driver slots:	10
Brand:	BigTreeTech	Our item no:	DAR01028

Order now, we can ship this today!

£87.75

£73.13 Excl. 20% VAT

In stock

BigTreeTech Octopus Pro v1.1 (H723)

BigTreeTech Octopus Pro v1.1 (H723) DAR01182

2
1
0

Description With the BigTreeTech Octopus Pro v1.1 (H723) you choose a very stable and safe 3D printer motherboard. It supports Raspberry Pi and Octoprint operating systems and Klipper, Marlin and RRF firmware. The firmware can be updated via DFU mode, where the firmware does not require a bootloader, but is sent directly to the board from the PC. The Octopus Pro has several versions of MCUs, so you can choose the one that suits your needs. It is equipped with a 32-bit ARM-level Cortex-M4 series STM32H723ZET6/ STM32F407ZET6 / STM32F429ZGT6 / STM32F446ZET6 chip. The frequency goes up to 168 MHz and the flash is 1 MB.

Other functionalities

8 powerful motor drives for a more stable unit
8 isolation chips that protect the motherboard and a motherboard protective level conversion chip that converts a 3.3 V signal into a 5 V signal
STEP/DIR mode, UART mode and an SPI mode
Connect 6 CNC fans and 2 normal fans
Compatible with NTC100K & PT100/PT1000 high temperature
Supports up to 60 V - Supports proximity sensors, jumper optional pull-up resistor and BL touch
USB Type-C connection

Specifications

Dimensions:	160 x 100 mm	Brand:	BigTreeTech
Operating volt logic:	3.3V	Chip:	STM32H723ZE
Operating volt vmot:	-	Manual:	Download
Input voltage:	12-24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Stepper driver slots:	8
No of thermistors:	4	Our item no:	DAR01182
Flash memory:	-

£97.75

£81.46 Excl. 20% VAT

14 day delivery

Creality 3D CR-M4 Silent Mainboard

Creality 3D CR-M4 Silent Mainboard DAR01395

2
1
0

Description This CR-M4 Silent Mainboard from Creality 3D is an original replacement part for your 3D printer. It is an almost silent motherboard that you can use in combination with your 3D printer. The board is equipped with an ultra-quiet TMC2209 motor driver and an STM32F401VET6 microcontroller. This motherboard is compatible with the CR-M4 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Hazard class:	n/a
Weight:	0.113 kg	Our item no:	DAR01395

Order now, we can ship this today!

£92.50

£77.08 Excl. 20% VAT

In stock

Creality 3D Ender 3 V3 KE Mainboard

Creality 3D Ender 3 V3 KE Mainboard DAR01410

2
1
0

Description This Ender 3 V3 KE Mainboard from Creality 3D is an original replacement part for your 3D printer. It is a 32-bit motherboard that you can use in combination with your 3D printer. The motherboard is very user-friendly and is equipped with an MS35774 driver for precision. This board is compatible with the Ender-3 V3 KE 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Hazard class:	n/a
Weight:	0.072 kg	Our item no:	DAR01410

Order now, we can ship this today!

£34.50

£28.75 Excl. 20% VAT

In stock

Creality 3D Halot Mage Mainboard

Creality 3D Halot Mage Mainboard DAR01415

1
0

Description This Halot Mage Mainboard from Creality 3D is an original replacement part for your 3D printer. You can use this motherboard in combination with your 3D printer. The motherboard is very user-friendly and is equipped with an STM32F401RCT6 microcontroller. This board is compatible with Creality 3D's Halot Mage 3D printer.

Specifications

Brand:	Creality 3D	Hazard class:	n/a
Weight:	0.035 kg	Our item no:	DAR01415

£72.50

£60.42 Excl. 20% VAT

14 day delivery

Elegoo Jupiter SE Mainboard

Elegoo Jupiter SE Mainboard DAR01484

1
0

Description The original Elegoo Jupiter SE Mainboard is the central printed circuit board that manages all signaling and communication within the printer, from motor control to LCD and sensor monitoring. It's an essential spare part in case of electronic malfunctions or interface issues.

Specifications

Brand:	Elegoo	Our item no:	DAR01484
Hazard class:	n/a

£34.50

£28.75 Excl. 20% VAT

14 day delivery

Elegoo Mars 4 DLP Mainboard

Elegoo Mars 4 DLP Mainboard DAR01496

1
0

Description This original control board is specifically designed for the Elegoo Mars 4 DLP. It features a powerful microcontroller for stable and accurate command processing, with support for USB flash drive, SD card, touchscreen, and various sensor interfaces. It is also compatible with the DLP projector setup, allowing for layered projection at once.

Specifications

Brand:	Elegoo	Our item no:	DAR01496
Hazard class:	n/a

£26.00

£21.67 Excl. 20% VAT

14 day delivery

Elegoo Mars 4 Mainboard

Elegoo Mars 4 Mainboard DAR01500

Description Easily replace a faulty mainboard on your Elegoo Mars 4 with this original part. This official replacement guarantees perfect compatibility and restores your printer to factory settings.

Specifications

Brand:	Elegoo	Our item no:	DAR01500
Hazard class:	n/a

£55.99

£46.66 Excl. 20% VAT

14 day delivery

Elegoo Mars 4 Ultra Mainboard

Elegoo Mars 4 Ultra Mainboard DAR01506

Description Easily replace a faulty motherboard on your Elegoo Mars 4 Ultra with this official part. This genuine replacement ensures perfect compatibility and restores your printer to factory defaults.

Specifications

Brand:	Elegoo	Our item no:	DAR01506
Hazard class:	n/a

£69.00

£57.50 Excl. 20% VAT

14 day delivery

Elegoo Neptune 4 (Pro) Mainboard

Elegoo Neptune 4 (Pro) Mainboard DAR01515

1
0

Description The original Elegoo Neptune 4/4 Pro Mainboard is the central control board that provides consistent control of print motors, screen, sensors, and network connectivity. Essential for anyone who wants to prevent or resolve electronic malfunctions.

Specifications

Brand:	Elegoo	Our item no:	DAR01515
Hazard class:	n/a

£69.50

£57.92 Excl. 20% VAT

14 day delivery

Elegoo Neptune 4 Plus & Max Mainboard

Elegoo Neptune 4 Plus & Max Mainboard DAR01535

Description Easily replace a faulty mainboard on your Elegoo Neptune 4 Plus or Max with this original part. This official replacement guarantees full compatibility and restores your 3D printer to its factory-frequency operation.

Specifications

Brand:	Elegoo	Our item no:	DAR01535
Hazard class:	n/a

£82.46

£68.72 Excl. 20% VAT

14 day delivery

Elegoo Saturn 3 Mainboard

Elegoo Saturn 3 Mainboard DAR01549

1
0

Description The original Elegoo Saturn 3 Mainboard is the central electronics board for the Saturn 3 (including Ultra versions). It controls all of the printer's functions: from LCD control to UV exposure and fans. Crucial for reliability and print precision.

Specifications

Brand:	Elegoo	Our item no:	DAR01549
Hazard class:	n/a

£52.00

£43.33 Excl. 20% VAT

14 day delivery

Elegoo Saturn 3 Ultra Mainboard

Elegoo Saturn 3 Ultra Mainboard DAR01555

1
0

Description The original Elegoo Saturn 3 Ultra Mainboard is the central circuit board that manages the controls, sensors, motors, and safety features of your Saturn 3 Ultra. It's an essential spare part for anyone who wants to prevent or repair electronic malfunctions.

Specifications

Brand:	Elegoo	Our item no:	DAR01555
Hazard class:	n/a

£63.00

£52.50 Excl. 20% VAT

14 day delivery

Creality 3D CR-10 SE Mainboard

Creality 3D CR-10 SE Mainboard DAR01597

1
0

Description This 32 bit Mainboard is an original replacement part from Creality. The mainboard is suitable for the CR-10 SE 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Our item no:	DAR01597
Hazard class:	n/a

£32.87

£27.39 Excl. 20% VAT

14 day delivery

Creality 3D Motherboard for Ender 3 V3 Plus

Creality 3D Motherboard for Ender 3 V3 Plus DAR01790

1
0

Description This 32 bit motherboard is an original replacement part for the Ender 3 V3 Plus 3D printer from Creality. The motherboard has a TMC2209 stepper motor driver.

Specifications

Brand:	Creality 3D	Hazard class:	n/a
Weight:	0.096 kg	Our item no:	DAR01790

£89.50

(sold out)

£74.58 Excl. 20% VAT

Anycubic Kobra 3 Motherboard

Anycubic Kobra 3 Motherboard DAR01802

Description This motherboard is an original replacement part for the Kobra 3 and Kobra 3 Combo 3D printers from Anycubic.

Specifications

Brand:	Anycubic	Our item no:	DAR01802
Hazard class:	n/a

£60.00

£50.00 Excl. 20% VAT

14 day delivery

Elegoo OrangeStorm Giga mainboard

Elegoo OrangeStorm Giga mainboard DAR02045

Description The Elegoo OrangeStorm Giga motherboard is the central operating system for the OrangeStorm Giga 3D printer, designed for industrial applications and demanding printing projects. This motherboard offers powerful performance and advanced features essential for precise and reliable 3D prints.

Key Features:

Firmware: Pre-installed Klipper firmware, known for its high speed and accuracy in 3D printing.
Connectivity: Supports USB, LAN and Wi-Fi, giving users flexibility in sending print jobs.
Multi-Extruder Support: Expandable to up to four print heads, enabling simultaneous printing with multiple materials or colors.

Specifications

Brand:	Elegoo	Our item no:	DAR02045
Hazard class:	n/a

£138.00

£115.00 Excl. 20% VAT

14 day delivery

Anycubic ACE Pro Motherboard

Anycubic ACE Pro Motherboard DAR02171

Description Effortlessly upgrade your 3D printing setup with the powerful ACE Pro motherboard. Designed specifically for smart multicolor printing, wired communication, and reliable operation.

Specifications

Brand:	Anycubic	Our item no:	DAR02171
Hazard class:	n/a

£51.60

£43.00 Excl. 20% VAT

14 day delivery

Anycubic Kobra S1 (Combo) Lower computer motherboard PCBA

Anycubic Kobra S1 (Combo) Lower computer motherboard PCBA DAR02178

Description The original Lower Computer Motherboard PCBA of the Anycubic Kobra S1 (Combo) controls all critical functions, from motion and hot-end temperature to communication with the ACE Pro module. Essential for stable, reliable printer performance.

Specifications

Brand:	Anycubic	Our item no:	DAR02178
Hazard class:	n/a

Order now, we can ship this today!

£20.50

£17.08 Excl. 20% VAT

In stock

Creality 3D Ender-5 Max main board

Creality 3D Ender-5 Max main board DAR02508

Description This original Creality mainboard is specially designed for the Ender-5 Max and serves as a direct replacement for the standard motherboard. Ideal for defects or malfunctions, so you can get your printer up and running again quickly.

Specifications

Brand:	Creality 3D	Our item no:	DAR02508
Hazard class:	n/a

Order now, we can ship this today!

£30.20

£25.17 Excl. 20% VAT

In stock

Flashforge Mainboard AD5X

Flashforge Mainboard AD5X DAR02706

Description The Flashforge Mainboard AD5X is the central control board of the Flashforge AD5X 3D printer. This original motherboard controls all essential functions of the printer, such as motors, temperature control, sensors, and communication with the extruder board and display. Ideal as a replacement for a defective mainboard.

Specifications

Brand:	Flashforge	Our item no:	DAR02706
Hazard class:	n/a

£82.00

(sold out)

£68.33 Excl. 20% VAT

BigTreeTech Manta M8P Control Board V2.0

BigTreeTech Manta M8P Control Board V2.0 DAR02753

Description The Manta M8P V2.0 is a powerful and future-proof 32-bit control board for 3D printers, specifically designed for use with Klipper firmware. Thanks to its integrated architecture, this board combines microcontroller and host computing (via a core board such as BIGTREETECH CB1 or Raspberry Pi CM4) on a single PCB, which saves space, reduces cable clutter, and ensures a neat, reliable build.

Specifications

Operating volt logic:	3.3V	Hazard class:	n/a
Input voltage:	12-24V	Printer has USB:	yes
No of thermistors:	5	Stepper driver slots:	8
Brand:	BigTreeTech	Our item no:	DAR02753
USB version:	USB 2.0	Replaces item no:	DAR01024
Network:	work ethernet WiFi

£78.00

£65.00 Excl. 20% VAT

14 day delivery

Creality 3D K1 Mainboard

Creality 3D K1 Mainboard DRO00217

Description This 32-bit mainboard for the Creality 3D K1 printer is equipped with silent TMC2209 stepper drivers.

Specifications

On-board stepper drivers:	4	Weight:	0.096 kg
Brand:	Creality 3D	Hazard class:	n/a
Chip:	TMC2209	Our item no:	DRO00217

£139.00

£115.83 Excl. 20% VAT

14 day delivery

Creality 3D K1 Max Mainboard

Creality 3D K1 Max Mainboard DRO00218

Description This 32-bit mainboard for the Creality 3D K1 Max printer is equipped with silent TMC2209 stepper drivers.

Specifications

On-board stepper drivers:	4	Weight:	0.096 kg
Brand:	Creality 3D	Hazard class:	n/a
Chip:	TMC2209	Our item no:	DRO00218

Order now, we can ship this today!

£99.50

£82.92 Excl. 20% VAT

In stock

MLE Megatronics Leapfrog Creatr / Creatr XL Controller Board

MLE Megatronics Leapfrog Creatr / Creatr XL Controller Board DRW00054

Description Original motherboard for the Leapfrog Creatr (XL). This mainboard has DRV8825 stepper drivers on board and works on 24V. The 16-bit Atmega 2560 microprocessor can be programmed from Arduino. You still need to provide the board with firmware

Specifications

Brand:	123-3D	Our item no:	DRW00054
Hazard class:	n/a

£72.00

£60.00 Excl. 20% VAT

14 day delivery

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

Popular products

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg

£70.00

© 2026 - 123-3d.co.uk