End stops

Description With this switch it is easy to make a mechanical end stop. The switch has a normally close and open connection.

Specifications

Dimensions:	20 x 6.5 x 10 mm	Brand:	123-3D
Contact material:	silver	Hazard class:	n/a
Contact configuration:	SPDT	Our item no:	DEL00000

Order now, we can ship this tomorrow!

£2.20

£1.83 Excl. 20% VAT

In stock

Microswitch end stop with 1 metre cable

Zoom in

Description With this switch you can easily create a mechanical end stop. The switch is already equipped with a 1 metre soldered cable.

Specifications

Contact material:	silver	Brand:	123-3D
Contact configuration:	SPDT	Hazard class:	n/a
Length:	1 m	Our item no:	DEL00005

Order now, we can ship this tomorrow!

£3.40

£2.83 Excl. 20% VAT

In stock

Mechanical end stop v1.2

Zoom in

Description This mechanical end stop has the microswitch pre-mounted on the printed circuit board and features a 3-pin Molex header and a 3-pin Dupont header for easy attachment to your 3D printer or CNC machine. This end stop is also equipped with a blue LED that lights up when the microswitch is activated. The end stop is suitable for 3V and 5V control, which means that it can be used with various controller boards.

Specifications

Dimensions:	36.5 x 16 x 10 mm	Hazard class:	n/a
Brand:	123-3D	Our item no:	DEL00009

Order now, we can ship this tomorrow!

£3.40

£2.83 Excl. 20% VAT

In stock

Mechanical end stop including cable

Zoom in

Description This mechanical end stop PCB can be used with 3V and 5V. The end stop is equipped with a 65cm long cable with a 3-pin Dupont connector so that you can easily connect the end stop to your electronics board.

Specifications

Dimensions:	40 x 17 x 10 mm	Brand:	123-3D
Colour:	Red	Hazard class:	n/a
Cable length:	65 cm	Our item no:	DAR00031

Order now, we can ship this tomorrow!

£3.40

£2.83 Excl. 20% VAT

In stock

Mechanical end stop including cable (3-pack)

Zoom in

Specifications

Dimensions:	40 x 17 x 10 mm	Brand:	123-3D
Colour:	Red	Hazard class:	n/a
Cable length:	65 cm	Our item no:	DAR00023

Order now, we can ship this tomorrow!

£11.25

£9.38 Excl. 20% VAT

In stock

Optical end stop

Zoom in

Description This fully assembled Opto-end stop uses a Vishay light barrier as a detector. Compatible with the mechanical variants.

Specifications

Width:	17.5 mm	Brand:	123-3D
Length:	42 mm	Hazard class:	n/a
Height:	15 mm	Our item no:	DEL00002

Order now, we can ship this tomorrow!

£6.25

£5.21 Excl. 20% VAT

In stock

Creality 3D end stop

Zoom in

Description This mechanical end stop is applicable to the Creality CR-10mini and CR-10s series

Specifications

Brand:	Creality 3D	Our item no:	DEL00008
Hazard class:	n/a

Order now, we can ship this tomorrow!

£4.30

£3.58 Excl. 20% VAT

In stock

Creality 3D End stop (2 pieces)

Zoom in

Description This mechanical end stop can be used on the Creality CR-10mini and CR-10s series

Specifications

Brand:	Creality 3D	Our item no:	DAR01019
Hazard class:	n/a

£7.50

£6.25 Excl. 20% VAT

14 day delivery

Duet3D IR probe

Zoom in

Description This Duet3D IR probe detects the height of the print bed with infrared light. How exactly does this work? The reflection from the print bed surface is captured by the IR sensor so that the height can be determined without contact.

The sensor is supplied with a loose connector and two mounting screws.

NOTE: The sensor does not work with all surfaces. Avoid shiny surfaces!

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	24 x 18 mm	Hazard class:	n/a
Operating volt logic:	3.5 - 25V	Our item no:	DUE00009
Brand:	Duet3D

£29.95

£24.96 Excl. 20% VAT

14 day delivery

Creality 3D CR Touch Auto levelling kit

Zoom in

Description The Creality 3D CR Touch Auto levelling kit is a solution for automatically leveling your 3D printer. It performs multi-point detection on the bed and records the height of each detection point.

The CR Touch has a metal probe that reduces wear and significantly extends its life. It works with PEI, glass, metal, magnetic circuit boards, carborundum glass and other 3D printing platform materials.

It is easy to install and use. You just need to download firmware from Creality official website and copy it to TF/SD card. Insert the card directly into the card slot on the 3D printer. The program can be updated after power on.

The CR Touch only works on 3D printers with a 32-bit motherboard.

Specifications

Dimensions:	27 x 17.5 x 39.3 mm	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR01045
Weight:	0.05 kg

Order now, we can ship this tomorrow!

£37.00

£30.83 Excl. 20% VAT

In stock

Antclabs BLTouch Auto Bed Levelling Sensor v3.1

Zoom in

Description The BLTouch is a sensor for automatic bed levelling. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.

The BLTouch sensor works with almost any 3D printer and is suitable for various print bed surfaces such as metal, glass, wood and tape.

Specifications

Cable length:	15 cm	Manual:	Download
Brand:	ANTCLABS	Hazard class:	n/a
Voltage VDC:	5 v/°c	Our item no:	DAR00016
Weight:	0.01 kg

Order now, we can ship this tomorrow!

£29.60

£24.67 Excl. 20% VAT

In stock

Antclabs BLTouch Auto Bed Levelling Sensor cable kit SM-XD, 1m

Zoom in

Description With the Antclabs BLTouch cable of 1 metre, you can bridge a longer distance for mounting the BLTouch Auto Bed Levelling Sensor.

Specifications

Length:	1 m	Hazard class:	n/a
Brand:	ANTCLABS	Our item no:	DAR00018

Length:

1 m

1.5 m

Order now, we can ship this tomorrow!

£3.90

£3.25 Excl. 20% VAT

In stock

Antclabs BLTouch Auto Bed Levelling Sensor cable kit SM-XD, 1.5m

Zoom in

Description With the 1.5 metre Antclabs BLTouch cable, you can bridge a longer distance for mounting the BLTouch Auto Bed Levelling Sensor.

Specifications

Length:	1.5 m	Hazard class:	n/a
Brand:	ANTCLABS	Our item no:	DAR00019

Length:

1 m

1.5 m

£4.85

£4.04 Excl. 20% VAT

14 day delivery

M12 LJ12A3-4-Z/BX Inductive distance sensor, 4mm

Zoom in

Description Easily add an automatic bed levelling system to your 3D printer with this inductive distance sensor. The sensor triggers on metal objects and has a theoretical measuring distance of 4mm. The diameter of the sensor is 12mm.

The sensor operates on 6V-36V DC, is an NPN variant/NO and has an internal pull-up resistor which makes it necessary to add a series resistor to the signal connection.

Wire colours:
Brown: +V (12V)
Black: Output (to series resistor 10k)
Blue: 0V (gnd)

Specifications

Diameter:	12 mm	Brand:	123-3D
Input voltage:	6-36V	Hazard class:	n/a
Screwthread type:	M12	Our item no:	DEL00006
Max current:	0.3 A

Order now, we can ship this tomorrow!

£7.25

£6.04 Excl. 20% VAT

In stock

M18 LJ18A3-8-Z/BY Inductive distance sensor, 8mm

Zoom in

Description Easily add an automatic bed levelling system to your 3D printer with this inductive distance sensor. The sensor triggers on metal objects and has a theoretical measuring distance of 8mm. The diameter of the sensor is 18mm.

The sensor operates on 6V-36V DC, is a PNP variant/NO and has an internal pull-up resistor which makes it necessary to add a series resistor to the signal connection.

Wire colours:
Brown: +V (12V)
Black: Output (to voltage divider)
Blue: 0V (gnd)

Data sheet (PDF)

Specifications

Diameter:	18 mm	Brand:	123-3D
Input voltage:	6-36V	Hazard class:	n/a
Max current:	0.3 A	Our item no:	DEL00004

£7.25

£6.04 Excl. 20% VAT

14 day delivery

Hall-E Endstop

Zoom in

Description This Hall-E Endstop from 123-3D detects magnetic fields thanks to a sensor. The endstop includes a sensitive range potentiometer. It is also equipped with an LED light that indicates an end and stop status.

Specifications

Input voltage:	3.3V-5V	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR00125

£17.00

£14.17 Excl. 20% VAT

14 day delivery

Miniature microswitch with pre-soldered wire (1.5m)

Zoom in

Description

Specifications

Cable length:	150 cm	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR00127

Order now, we can ship this tomorrow!

£4.25

£3.54 Excl. 20% VAT

In stock

TCST2103 Opto end stop (through hole)

Zoom in

Description This TCST2103 Opto endstop is a transmissive sensor. It contains an infrared emitter and a phototransistor, which are placed opposite each other on the optical axis. The lead package blocks visible light. You use the TCST2103 to build your own opto endstop.

Properties

Function: photo interrupter
Maximum collector current: 100mA
Maximum collector transmit voltage: 70V
Maximum current throughput: 20%
Max forward current: 60mA
Maximum operating temperature: 85°C
Maximum power distribution: 250mW
Max reverse voltage: 6V
Minimum operating temperature: -55°C
Fixing: bore
Number of channels per chip: 1
Peak Wavelength: 950nm
Number of pins: 4

Specifications

Dimensions:	24.5 x 6.3 x 11.1 mm	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR00143

Order now, we can ship this tomorrow!

£1.98

£1.65 Excl. 20% VAT

In stock

3-wire cable red / black / yellow with 1 connector, 1m

Zoom in

Description This 3-wire cable is very suitable for connecting end stops. The cable has a length of 1 metre and is fitted with a 3-pin female header on one side. The other side has an open end.

Specifications

Pin pitch:	2.54 mm	Brand:	123-3D
No of ways:	3	Hazard class:	n/a
Length:	1 m	Our item no:	DDK00004

Order now, we can ship this tomorrow!

£1.20

£1.00 Excl. 20% VAT

In stock

GEEETECH Endstop kit for Prusa i3 Pro B 3D Printer

Zoom in

Description Replace a defective end stop on your GEEETECH i3 Pro B printer with this set of 3 and you will immediately have spare end stops in stock.

Specifications

Brand:	Geeetech	Our item no:	DAR00684
Hazard class:	n/a

Order now, we can ship this tomorrow!

£7.91

£6.59 Excl. 20% VAT

In stock

Creality 3D Y-axis Endstop Ender-3 S1 (Plus)

Zoom in

Description This Creality 3D Y-axis End Stop can be used on the following models of Creality printers: Ender-3 S1 and the Ender-3 S1 Plus.

Specifications

Brand:	Creality 3D	Our item no:	DAR01050
Hazard class:	n/a

Order now, we can ship this tomorrow!

£4.50

£3.75 Excl. 20% VAT

In stock

Creality 3D X-axis End Stop

Zoom in

Description This Creality 3D X-axis End Stop can be used on the following models of Creality printers: Ender-3 V2 Neo, Ender-3 S1 Plus, Ender-3 S1 and the Ender-3 S1 Pro.

Specifications

Brand:	Creality 3D	Our item no:	DAR01051
Hazard class:	n/a

Order now, we can ship this tomorrow!

£6.50

£5.42 Excl. 20% VAT

In stock

Creality 3D Ender-3 V3 SE/KE Y-axis End Stop

Zoom in

Description This Y-axis end stop has a PCBA module and can be used on the Ender-3 V3 SE and KE 3D printer from Creality 3D.

Specifications

Colour:	Black	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR01250

Order now, we can ship this tomorrow!

£4.25

£3.54 Excl. 20% VAT

In stock

Creality 3D Halot Mage (Pro and S) Z Limit Switch

Zoom in

Description This Creality 3D Halot-Mage (pro) Z Limit Switch is an original replacement part for your 3D printer. The switch is a PCBA module. In addition, it is a photoelectric opto switch module (B). This product is suitable for the Halot-Mage Pro, Halot-Mage and Halot-Mage S 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Hazard class:	n/a
Weight:	0.001 kg	Our item no:	DAR01412

Order now, we can ship this tomorrow!

£7.50

£6.25 Excl. 20% VAT

In stock

Elegoo Neptune 4 (Pro, Plus & Max) Proximity Switch (Leveling Sensor)

Zoom in

Description The Elegoo Neptune 4 Series Proximity Switch is an original inductive auto-bed leveling sensor designed for the Neptune 4, 4 Pro, 4 Plus, and 4 Max. This contactless sensor detects the metal bed during homing, for accurate leveling and reliable prints.

Specifications

Brand:	Elegoo	Our item no:	DAR01520
Hazard class:	n/a

£10.00

£8.33 Excl. 20% VAT

14 day delivery

Elegoo Saturn 3 Ultra & Jupiter SE End stop

Zoom in

Description The original end stop for both the Elegoo Saturn 3 Ultra and the Jupiter SE. This switch detects the end point of the Z-axis during homing and prevents damage to the build plate or LCD during the "return to zero."

Specifications

Brand:	Elegoo	Our item no:	DAR01551
Hazard class:	n/a

£2.20

£1.83 Excl. 20% VAT

14 day delivery

Creality 3D Ender 3 V3 X/Z Limit switch

Zoom in

Description The Creality Ender-3 V3 X/Z Limit Switch is an essential replacement part that ensures precise positioning of your 3D printer’s X and Z axes. This mechanical limit switch prevents the print head or bed from moving outside of the allowable range, which is crucial for consistent and reliable print results. Specifically designed for the Ender-3 V3 and V3 Plus models, this switch offers easy installation and long-lasting performance.

Key Features:

High precision: Ensures precise homing and positioning of the X and Z axes.
Durable Design: Made of high-quality materials for long-lasting use.
Easy Installation: Plug-and-play design with 3-pin connector for quick replacement.

Specifications

Brand:	Creality 3D	Our item no:	DAR01560
Hazard class:	n/a

£4.30

£3.58 Excl. 20% VAT

14 day delivery

Creality 3D Ender-3 S1 (Plus/Pro) X-axis_Limit Switch

Zoom in

Description This X-axis limit switch is an X-CRI-4111 PCBA module that works at 1V. The product is suitable for Creality Ender-3 V2 Neo, Ender-3 S1 Plus, Ender-3 S1 and Ender-3 S1 Pro 3D printers.

Specifications

Brand:	Creality 3D	Our item no:	DAR01586
Hazard class:	n/a

£3.79

£3.16 Excl. 20% VAT

14 day delivery

Flashforge Adventure 3 spare Y-axis sensor board

Zoom in

Description The Flashforge Adventurer 3 Y-axis end-stop sensor is an essential replacement part for the Flashforge Adventurer 3 3D printer. This sensor detects the end position of the Y-axis, which is crucial for accurate and reliable prints. Replacing a faulty sensor can prevent printing problems and extend the life of your printer.

Key Features:

Compatibility: Specifically designed for the Flashforge Adventurer 3.
Function: Detects the end position of the Y-axis to ensure precise positioning of the print bed.
Reliability: Ensures stable and consistent operation of the Y-axis.

Specifications