Thermistors Components Electronics 3D printer parts Ceramic heating element, heater cartridge 24V/40W + Thermistor 100K 123-3d.co.uk

Creality 3D Hotend Thermistor 100K | 60cm cable with connector 1.8mm diameter

Description This Creality 3D hotend thermistor has a cable length of 60 cm and is suitable for replacing the hotend thermistor of the following Creality printer models: CR-10S Pro, CR-X and the CR-10 V2. But it can also be used for other printers that use a 100K temperature sensor.

Specifications

Cable length:	60 cm	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR00043

£6.50

£5.42 Excl. 20% VAT

14 day delivery

GEEETECH Thermistor with cable (70cm long) for Prusa i3 Pro B 3D Printer

Zoom in

Description Original Geeetech hotend thermistor to replace a defective thermistor on the i3 Pro B printer. The cable length is 70 cm and is equipped with a 2 pin connector.

Specifications

Cable length:	70 cm	Hazard class:	n/a
Brand:	Geeetech	Our item no:	DAR00685

Order now, we can ship this today!

£5.41

£4.51 Excl. 20% VAT

In stock

Flsun SR/Q5 hotend thermistor

Zoom in

Description This original Flsun SR/Q5 hotend thermistor has a cable length of 18 cm and is an original replacement part for Flsun 3D printers.

Specifications

Max temp:	300 °C	Hazard class:	n/a
Cable length:	18 cm	Our item no:	DAR01015
Brand:	Flsun

Order now, we can ship this today!

£5.60

£4.67 Excl. 20% VAT

In stock

Creality 3D Ender 3 S1 (Plus) NTC thermistor 100kΩ

Zoom in

Description Replace your old thermistor of your Creality Ender-3 S1 or Ender-3 S1 Plus with this original Creality NTC 100kΩ thermistor.

Specifications

Brand:	Creality 3D	Our item no:	DAR01047
Hazard class:	n/a

£4.95

£4.13 Excl. 20% VAT

14 day delivery

Ceramic heating element, heater cartridge 24V/40W + Thermistor 100K

Zoom in

Description Set of a 24 volt 40 watt heater cartridge with a cable length of 125 cm and a 100K thermistor with a 125 cm long cable pre-shrunk with connector.

Specifications

Power rating:	40 W	Brand:	123-3D
Mounting:	TH	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR01192
Cable length:	125 cm

Order now, we can ship this today!

£13.50

£11.25 Excl. 20% VAT

In stock

Creality 3D CR-M4 Thermistor

Zoom in

Description This Creality 3D NTC-0.55K Thermistor is an original replacement part for your 3D printer. The thermistor is 35 mm long and contains a PH2.0-2P connection. This is suitable for the CR-M4 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Hazard class:	n/a
Weight:	0.001 kg	Our item no:	DAR01393

Order now, we can ship this today!

£4.15

£3.46 Excl. 20% VAT

In stock

Elegoo Neptune 4 (Pro) Thermistor

Zoom in

Description Original thermistor for the Neptune 4 and 4 Pro, essential for accurate temperature measurement and reliable print quality. Easy installation and guaranteed compatibility.

Specifications

Brand:	Elegoo	Our item no:	DAR01519
Hazard class:	n/a

£5.16

£4.30 Excl. 20% VAT

14 day delivery

Elegoo Neptune 4 Plus & Max Thermistor

Zoom in

Description

Original spare part
High-quality
Elegoo

Specifications

Brand:	Elegoo	Our item no:	DAR01537
Hazard class:	n/a

Order now, we can ship this today!

£5.30

£4.42 Excl. 20% VAT

In stock

Bondtech HeatLink Thermistor 300°C

Zoom in

Description With this Heatlink Thermistor you are able to reach temperatures up to 300°C.

The Thermistor can be used in combination with the following two heat links:

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Max temp:	300 °C	Video instructions:	Instructional video
Cable length:	150 cm	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00062

Order now, we can ship this today!

£12.75

£10.63 Excl. 20% VAT

In stock

E3D semitec thermistor incl. sleeving 100k Ohm

Zoom in

Description This 100k thermistor is supplied with fiberglass insulation.

For the Marlin firmware you need the following setting:

#TEMP_SENSOR_N 5

Specifications

Max temp:	300 °C	Hazard class:	n/a
Brand:	E3D	Our item no:	DED00054

Order now, we can ship this today!

£5.75

£4.79 Excl. 20% VAT

In stock

E3D thermistor cartridge

Zoom in

Description The E3D Thermistor Cartridge is an easy to attach thermistor cartridge for the E3D V6 heaterblocks. The cartridge contains the Semitec 104GT thermistor. The cartridge housing is made of copper and the thermistor is secured with a high quality thermally conductive ceramic adhesive.

The cartridge comes with a cable with connector.

For the Marlin firmware you need the following setting:
#TEMP_SENSOR_N 5

Specifications

Diameter:	3 mm	Brand:	E3D
Max temp:	280 °C	Hazard class:	n/a
Cable length:	100 cm	Our item no:	DED00069

Order now, we can ship this today!

£6.45

£5.38 Excl. 20% VAT

In stock

E3D Prusa Specific Thermistor (MK2, MK3)

Zoom in

Description The E3D Prusa specific Thermistor has a maximum temperature of 300°C and is equipped with a molex microfit 3.0 connector. The cartridge comes with a 1m long connection cable. The Thermistor has a diameter of 3mm and a length of 15mm.

Specifications

Max temp:	300 °C	Hazard class:	n/a
Brand:	E3D	Our item no:	DED00258

Order now, we can ship this today!

£8.25

£6.88 Excl. 20% VAT

In stock

Slice Engineering thermistor cartridge, 300°C

Zoom in

Description This original Mosquito thermistor cartridge from Slice Engineering is suitable for measuring ambient and printer temperatures up to 300°C.

Specifications

Max temp:	300 °C	Brand:	Slice Engineering
Cartridge length:	200 cm	Hazard class:	n/a
Cartridge diameter:	3 mm	Our item no:	DSE00009

Order now, we can ship this today!

£29.95

£24.96 Excl. 20% VAT

In stock

Thermistor 100K

Zoom in

Description With the standard thermistor 100K you can perform very stable temperature measurements (up to 250°C). Thanks to its very fast response time and compact size, the thermistor is pleasant to use. This thermistor is placed in a glass casing and can be used at the hotend or the heated bed of your 3D printer.

Downloads: Datasheet

Thermistor brand is: EPCOS
Thermistor type is: B57540G0104J
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

Specifications

Probe diameter:	0.8 mm	Tolerance:	5
Mounting:	TH	Max power:	18 mw
Sensitivity index:	-	Brand:	123-3D
Thermal coefficient:	4.5	Hazard class:	n/a
Thermal time constant:	3	Our item no:	DTH00001

Order now, we can ship this today!

£3.40

£2.83 Excl. 20% VAT

In stock

Thermistor 100K pre-shrunk with connector, 1m

Zoom in

Description With this fast-responding 100K thermistor you can take accurate temperature measurements up to a maximum of 250°C.

The compact thermistor is neatly concealed in a piece of fiberglass and equipped with a pre-shrunk cable of 1 metre. The cable is heat resistant (up to 280°C) so that the thermistor functions perfectly when using ABS and PLA filament. The thermistor is equipped with a Molex connector that you can use to connect to Minitronics or Megatronics.

Thermistor brand is: EPCOS
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

Specifications

Max temp:	260 °C	Length:	1 m
Probe diameter:	0.15 mm	Brand:	123-3D
Probe length:	40 mm	Hazard class:	n/a
Mounting:	TH	Our item no:	DTH00002
Max power:	18 mw

Order now, we can ship this today!

£5.75

£4.79 Excl. 20% VAT

In stock

Snapmaker thermistor

Zoom in

Description Snapmaker thermistor for the 3D print module of the Snapmaker 3-in-1.

Specifications

Brand:	Snapmaker	Our item no:	DTH00014
Hazard class:	n/a

Order now, we can ship this today!

£4.95

£4.13 Excl. 20% VAT

In stock

Semitec thermistor 100K NTC 104NT4R025H42G

Zoom in

Description With this 100K thermistor you can perform very stable temperature measurements ranging from -50°C to 300°C!

The thermistor comes with a high-quality glass coating and has a superior response speed. Ideal for use in combination with your hotend or heated bed! In addition, thanks to its compact size, it is very pleasant to use.

Thermistor brand is: Semitec
Thermistor type is: 104NT4R025H42G
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

NOTE: This thermistor requires an electronics board with a free analog input and 4K7 Ohm pull-up resistor.

Specifications

Max temp:	300 °C	Outer diameter:	0.8 mm
Resistance tolerance:	3	Hazard class:	n/a
Brand:	123-3D	Our item no:	DTH00028

Order now, we can ship this today!

£3.30

£2.75 Excl. 20% VAT

In stock

Thermistor 100K pre-shrunk with connector, 2m

Zoom in

Description With this fast-responding 100K thermistor you can take accurate temperature measurements up to a maximum of 250°C.

The compact thermistor is neatly concealed in a piece of fiberglass and equipped with a pre-shrunk cable of 1 metre. The cable is heat resistant (up to 280°C) so that the thermistor functions perfectly when using ABS and PLA filament. The thermistor is equipped with a Molex connector that you can use to connect to Minitronics or Megatronics.

Thermistor brand is: EPCOS
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

Specifications

Max temp:	260 °C	Length:	2 m
Probe diameter:	0.15 mm	Brand:	123-3D
Probe length:	40 mm	Hazard class:	n/a
Mounting:	TH	Our item no:	DTH00030
Max power:	18 mw

Order now, we can ship this today!

£6.75

£5.63 Excl. 20% VAT

In stock

Dyze thermistor with Molex connector 500°C

Zoom in

Description With this Dyze thermistor you can take accurate temperature measurements up to 500°C!

The thermistor features a Molex connector and an M5 thread for easy attachment of your Dyze hotend. The cable is provided with a black shrink tube and has a length of 10.2cm. At a temperature of 20°C the resistance is 5.2 MΩ and at 400°C it is 250 Ω.

CAUTION: Please update your firmware before getting started with this thermistor.

Specifications

Resistance tolerance:	500 °C	Hazard class:	n/a
Cable length:	10 cm	Our item no:	DYZ00009
Brand:	Dyze Design

Order now, we can ship this today!

£25.95

£21.63 Excl. 20% VAT

In stock

Quantity	Product
No products
Total: £0.00

Thermistors

Popular products