Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000s of products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 01270 433 123
E: info@123-3D.co.uk
Free delivery over £30

Top Rated Seller

Payment options

Lots of popular payment options!

Follow us on social media

Official dealer

Official Prusa dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

BigTreeTech

BigTreeTech SKR mini E3 v3.0 32-bit mainboard

BigTreeTech SKR mini E3 v3.0 32-bit mainboard DAR00690

Description With this motherboard from Bigtreetech you can easily upgrade your 3D printer.

The SKR Mini E3 v3.0 is equipped with a micro USB connection and five motor driver interfaces: XM, YM, ZAM, ZBM and EM. You can easily expand the interface with a heated bed module, a filament detection function, a resume printing function, a touchscreen or the BLTouch for automatic bed leveling. In addition, you can also connect the automatic shutdown module so that your printer switches off automatically after your print is completed.

The board has a size of 103.75mm x 70.25mm and is equipped with a powerful 32-bit processor with a TMC2209 driver, the drivers have a RET6 chip.

Ideal to replace the Ender-3 V2 motherboard.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	103.75 x 70.25 mm	Brand:	BigTreeTech
Input voltage:	12-24V	Network:	no
Processor:	ARM CORTEX M3	Hazard class:	n/a
On-board stepper drivers:	4	Our item no:	DAR00690

Order now, we can ship this today!

£39.00

£32.50 Excl. 20% VAT

In stock

BigTreeTech RRF E3 v1.1 32-bit mainboard

BigTreeTech RRF E3 v1.1 32-bit mainboard DAR00450

Description

With this motherboard from Bigtreetech you can easily upgrade your 3D printer.

The RRF E3 v1.1 is equipped with a USB connection and four motor driver interfaces: XM, YM, ZAM, ZBM, EM. You can easily expand the interface to include a filament detection function, a resume printing function, BLTouch for automatic bed leveling and RGB light. In addition, you can connect the automatic shutdown module so that your 3D printer turns off automatically after the print is completed.

The mainboard has a size of 103.75mm x 75.25mm and is compatible with the Ender 3, Ender 3 Pro, Ender 5 and CR10.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	100.75 x 70.25 mm	Brand:	BigTreeTech
Operating volt logic:	3.3V	Network:	WiFi
Input voltage:	12-24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Printer has USB:	yes
On-board stepper drivers:	5	Our item no:	DAR00450

Order now, we can ship this today!

£56.95

£47.46 Excl. 20% VAT

In stock

BigTreeTech SKR 2 mainboard ARM

BigTreeTech SKR 2 mainboard ARM DAR00479

Description With this motherboard from Bigtreetech you can easily upgrade your 3D printer.

The SKR 2 is equipped with a USB connection and five motor driver interfaces: X, Y, Z, E0 and E1. The board has a size of 90mm x 70mm and is equipped with a powerful 32-bit processor that supports various drivers such as the TMC2208, TMC2130, TMC5160, TMC2209, TMC2225, LV8729, DRV8825, A4988, ST820 and more.

Technical information (PDF)

Note: This product is Rev B.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	110 x 85 mm	Brand:	BigTreeTech
Input voltage:	12-24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Our item no:	DAR00479

£55.00

(sold out)

£45.83 Excl. 20% VAT

BigTreeTech Manta M5P Control Board

BigTreeTech Manta M5P Control Board DAR01023

Description The Manta M5P from BigTreeTech offers ultimate 3D printing experiences and is optimized for use in combination with the popular Klipper software for effortless control of up to five stepper motors.

Thanks to the many expansion options of the Manta M5P, you can fully customize your 3D printer to your wishes. In addition to the LAN port, two HDMI ports, 3x USB 2.0 and USB type-C port, there are headers for connecting LCD screens, an automatic bed leveling sensor, 3 thermistors and two heating elements next to the heated bed. The 40-pin GPIO header, CAN and SPI headers enable further expansion. If you use stepper motor control that supports higher voltages, you can set the M5P per driver to use 24-56V from the HV-IN port.

This control board is a good choice to replace the current electronics in your Ender-3, Voron V0 etc.

Note: You need the Raspberry CM4 or CB1 module from BigTreeTech, which is sold separately. The HDMI output only works with the CM4 module.

Specifications

Operating volt logic:	3.3V	Network:	work ethernet WiFi
Input voltage:	12-24V	Hazard class:	n/a
No of thermistors:	3	Printer has USB:	yes
Brand:	BigTreeTech	Stepper driver slots:	5
USB version:	USB 2.0	Our item no:	DAR01023

Order now, we can ship this today!

£61.20

£51.00 Excl. 20% VAT

In stock

BigTreeTech EZ2208 V1.0 Step Driver

BigTreeTech EZ2208 V1.0 Step Driver DAR01031

Description The EZ2208 from BigTreeTech's EZ series offers powerful, quiet stepper motor control. Thanks to the 1/256 step interpolation, a good 3D printing experience can also be achieved on less powerful electronics boards. The parameters of the TMC2208 chip can be further optimized via a UART connection to your microprocessor. With this module you can supply up to 2A current and it works on 12 to 24 Volts.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Max current:	2 A	Chip:	TMC2208
Input voltage:	12-24V	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01031

Order now, we can ship this today!

£6.50

£5.42 Excl. 20% VAT

In stock

BigTreeTech EZ2209 Step Driver

BigTreeTech EZ2209 Step Driver DAR01029

Description The EZ2209 from BigTreeTech's EZ series has the more modern TMC2209 on board, which does support StallGuard compared to the TMC2208. Thanks to the 1/256 step interpolation, a good 3D printing experience can also be achieved on less powerful electronics boards. The parameters of the TMC2208 chip can be further optimized via a UART connection to your microprocessor. With this module you can supply up to 2A current and works on 12 to 24 Volts.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Max current:	2 A	Chip:	TMC2209
Input voltage:	12-24V	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01029

Order now, we can ship this today!

£5.45

£4.54 Excl. 20% VAT

In stock

BigTreeTech EZ2225 V1.0 Step Driver

BigTreeTech EZ2225 V1.0 Step Driver DAR01034

Description The BigTreeTech EZ2225 has the TMC2225 chip on board for good 3D printing results at a competitive price. The 1/256 step interpolation offers a quiet 3D printing experience and the control can be further optimized via a UART connection. We recommend using active cooling to get the most out of this chip.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Max current:	1 A	Chip:	TMC2225
Input voltage:	12-24V	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01034

Order now, we can ship this today!

£5.50

£4.58 Excl. 20% VAT

In stock

BigTreeTech EZ6609 V1.0 Step Driver

BigTreeTech EZ6609 V1.0 Step Driver DAR01033

Description The BigTreeTech EZ6609 has the powerful GC6609 chip on board for optimal performance. Various parameters can be adjusted with the UART connection and the driver delivers up to 2A.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Max current:	2 A	Chip:	GC6609
Input voltage:	12-24V	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01033
Current rating:	1.2 A

Order now, we can ship this today!

£7.25

£6.04 Excl. 20% VAT

In stock

BigTreeTech EZ2130 V1.0 Step Driver

BigTreeTech EZ2130 V1.0 Step Driver DAR01032

Description The BigTreeTech EZ2130 from the EZ series contains the silent TMC2130 stepper motor driver. This powerful chip can supply up to 2A current and works between 12 and 24 Volts. To achieve optimal performance, the control parameters can be adjusted through communication via SPI. The maximum supported microstepping mode is 1/256 for this driver.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Operating volt logic:	3.3 - 5V	Chip:	TMC2130
Input voltage:	12-24V	Hazard class:	n/a
Max current:	2 A	Our item no:	DAR01032
Brand:	BigTreeTech

Order now, we can ship this today!

£11.50

£9.58 Excl. 20% VAT

In stock

BigTreeTech EZ5160 Pro V1.0 Step Driver

BigTreeTech EZ5160 Pro V1.0 Step Driver DAR01030

Description With the BigTreeTech EZ5160 you get the most powerful module in the series for optimal 3D printing performance. The TMC5160 is powerful, quiet and accepts up to 48V for fast print movements. With 2.5A maximum current and StallGuard you are assured of the highest reliability and precision. To achieve ultimate performance, you can adjust many settings via the SPI connection.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Input voltage:	-	Chip:	TMC5160
Brand:	BigTreeTech	Hazard class:	n/a
Current rating:	2.5 A	Our item no:	DAR01030

Order now, we can ship this today!

£21.50

£17.92 Excl. 20% VAT

In stock

BigTreeTech EZ-Driver Connector V1.0

BigTreeTech EZ-Driver Connector V1.0 DAR01036

Description Convert any BigTreeTech EZ stepper motor driver board to fit into a Pololu-compatible slot. Very useful if you have a board with Pololu-compatible slots, but want to use the compact EZ drivers. BigTreeTech's EZ series offers a variety of powerful stepper motor drivers, but these are not suitable for the 2x8 pin headers found on many 3D printer electronics boards. This module makes it possible to use the EZ drivers! You just need to take into account the extra height of the module compared to the standard stepper motor control boards.

Please note: This module comes without a driver, these are sold separately

Specifications

Brand:	BigTreeTech	Stepper driver slots:	1
Hazard class:	n/a	Our item no:	DAR01036

Order now, we can ship this today!

£2.45

£2.04 Excl. 20% VAT

In stock

BigTreeTech CB1 module

BigTreeTech CB1 module DAR01025

Description The CB1 from BigTreeTech is a powerful module that can be used in combination with the PI4B module from BigTreeTech to get a Raspberry PI4 compatible alternative. You can also mount the CB1 module on BigTreeTech's Manta boards to control a 3D printer. This solution is also compatible with the popular Klipper software.

The CB1 is equipped with a very fast Quad-core 64-bit ARM Cortex-A53 processor and has 1 GB of RAM. The board also has a graphics chip that supports 4K HDMI video and WiFi on board. For the most optimal performance, we recommend installing a heatsink so that heat can be dissipated efficiently.

Extra information:
Software

Specifications

Processor:	-	RAM memory:	-
Brand:	BigTreeTech	Hazard class:	n/a
Network:	WiFi	Our item no:	DAR01025

£34.75

(sold out)

£28.96 Excl. 20% VAT

BigTreeTech CB1 Heatsink

BigTreeTech CB1 Heatsink DAR01026

Description Get the best performance from your CB1 plug-in module with the BigTreeTech CB1 Heatsink. This specially developed heatsink with a sleek design effortlessly dissipates all heat, so that the processor can perform its tasks optimally. You can use a fan to dissipate the heat from the heatsink even faster.

Specifications

Colour:	Black	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01026

Order now, we can ship this today!

£6.35

£5.29 Excl. 20% VAT

In stock

BigTreeTech PI4B Adapter V1.0 for CB1 and CM4

BigTreeTech PI4B Adapter V1.0 for CB1 and CM4 DAR01027

Description With the BigTreeTech PI4B Adapter v1.0 you can easily use the CB1 or CM4 plug-in modules to get a powerful alternative to the Raspberry PI4B. The form factor of the PI4B Adapter is identical to the Raspberry PI4B, so you can easily use this board as a replacement.

The PI4B module offers extensive connectivity thanks to the 1000Mbit Ethernet port, CSI camera port and dual micro HDMI outputs. In addition, 4 USB 2.0 outputs and the standard Raspberry PI 30-pin header are available. The PI4B can be powered via a USB type-C input and has a MicroSD slot for inserting the memory card.

Please note: the PI TFT screen is only compatible with this board in combination with the CM4 plug-in module

Specifications

Brand:	BigTreeTech	Hazard class:	n/a
USB version:	USB 2.0	Our item no:	DAR01027
Network:	work ethernet WiFi

Order now, we can ship this today!

£19.85

£16.54 Excl. 20% VAT

In stock

BigTreeTech Octopus v1.1 control board

BigTreeTech Octopus v1.1 control board DAR00922

Description The board for building your Voron V2.4, but the BigTreeTech Octopus V1.1 is of course also a good choice for other 3D printer models! This electronics board is equipped with a powerful 32-bit ARM microprocessor that is supported by both Klipper and Marlin software. With 8 slots for control modules of stepper motors, not only multiple extruders, but also a bed plate, for example, can be leveled at three points.

The Octopus V1.1 also offers a lot of space in terms of expansion options. You can install an automatic bed height sensor, LCD screens and WIFI. There are connections for 5 thermistors, 4 heating elements, a heated bed and 6 PWM fans. The eight slots for stepper motor control are Pololu-compatible and can be set up for SPI and UART communication.

Note: It is recommended to connect the board to 24V

Specifications

Dimensions:	160 x 100 mm	Chip:	STM32F446ZET6
Input voltage:	24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Stepper driver slots:	8
No of thermistors:	5	Our item no:	DAR00922
Brand:	BigTreeTech

Order now, we can ship this today!

£58.10

£48.42 Excl. 20% VAT

In stock

BigTreeTech Octopus Max EZ

BigTreeTech Octopus Max EZ DAR01028

Description If you can't get enough of stepper motors, the BigTreeTech Octopus Max EZ offers a phenomenal TEN slots for EZ series stepper motor drive modules. Useful if, for example, you want to build a multi-material station and control it directly from your 3D printer.

The Octopus Max EZ has a powerful 32-bit microprocessor that runs at 550Mhz. In addition, numerous expansions are possible thanks to the CAN, automatic bed leveling sensor, LCD, RGB and FWS ports. The Octopus Max supports 7 fans, 4 heating elements, 5 thermistors and 6 end stops. Optionally you can install a WIFI module for network communication. For extra performance, if your stepper motor driver supports it, up to 56V can be supplied via a jumper setting that can be set per driver.

Specifications

Input voltage:	12-24V	Chip:	STM32H723ZET6
Processor:	-	Hazard class:	n/a
No of thermistors:	5	Stepper driver slots:	10
Brand:	BigTreeTech	Our item no:	DAR01028

Order now, we can ship this today!

£87.75

£73.13 Excl. 20% VAT

In stock

BigTreeTech Octopus Pro (F446)

BigTreeTech Octopus Pro (F446) DAR00923

Description A beast of a plate! The BigTreeTech Octopus V1.0 Pro is equipped with a powerful 32-bit ARM microprocessor that is supported by Klipper, ReprapFirmware and Marlin software. With 8 slots for control modules of stepper motors, not only multiple extruders, but also a bed plate, for example, can be leveled at three points.

In terms of expansion options, the Octopus V1.0 Pro offers a lot of space. You can install an automatic bed height sensor, LCD screens and WIFI. There are connections for 5 thermistors, 4 heating elements, a heated bed and 6 PWM fans.

The eight slots for stepper motor control are Pololu-compatible and can be set up for SPI and UART communication. You can choose per slot with a jumper whether you want to use the separate power supply for stepper drivers. This allows you to supply up to 60 Volts to the stepper motor control, although the module must of course be able to handle this. The TMC5160, for example, is a good option for this, as you can safely operate it on 48V for extra fast movements.

Specifications

Dimensions:	160 x 100 mm	Brand:	BigTreeTech
Operating volt logic:	3.3V	Chip:	STM32F446ZE
Input voltage:	-	Hazard class:	n/a
Processor:	ARM CORTEX M4	Stepper driver slots:	8
No of thermistors:	5	Our item no:	DAR00923

This product can be ordered 1 time(s).

Order now, we can ship this today!

£71.25

£59.38 Excl. 20% VAT

In stock

Bigtreetech Eddy Duo (USB or CAN)

Bigtreetech Eddy Duo (USB or CAN) DAR01929

7
6
5
4
3
2
1
0

Description

The BIGTREETECH Eddy Duo is an advanced, non-contact auto-bed leveling sensor designed to improve the precision and efficiency of your 3D printer. Thanks to advanced eddy current technology, the Eddy Duo detects microscopic irregularities on the print bed, allowing for fast and accurate height adjustments and optimal first layer adhesion.

Key Features:

Fast and accurate leveling: Levels the print bed in just 20 seconds with 0.5 µm precision, resulting in a uniform first layer and improved print results.
Versatile connectivity: Supports both USB and CAN bus communications, allowing it to be flexibly integrated into various printer configurations.
Lightweight Design: Weighing only 6 grams, it minimizes the load on the extruder and maintains the printer's movement speed and accuracy.
Temperature Compensation: Integrates with Klipper's temperature compensation function to keep leveling accurate and prevent temperature drift.
Easy Installation: Designed for easy mounting on standard Voron X carriages and compatible with various 3D printer models.

The Eddy Duo is specifically designed for Klipper-based 3D printers, offering seamless integration for users seeking superior print quality and ease of use.

Specifications

Cable length:	250 cm	Weight:	0.006 kg
Voltage:	5 v	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01929

£29.50

£24.58 Excl. 20% VAT

14 day delivery

Bigtreetech Eddy Coil

Bigtreetech Eddy Coil DAR01709

2
1
0

Description The Eddy Coil from Bigtreetech is a non-contact, high-speed leveling tool designed for Klipper. With its lightweight 6g design, the Eddy Coil can level within 20 seconds with 0.5µm precision. It uses millisecond-level eddy current to detect minute irregularities on the print bed, adjust the height accordingly, and level the bed. The advanced temperature compensation ensures consistent and precise leveling regardless of temperature differences. The Eddy Coil can be easily installed on the TL-Q5MC/PL-08N location within minutes. It works with EBB36/42 CAN and is ideal for DIY users. This leveling tool is suitable for H2 series extruders and Ender-3.

The box contains:

Eddy Coil
150mm 4pin Dupont female connection cable
M3x18 mounting screws 2x
M3x25 mounting screws 2x
Tie wraps 5x - Stickers 3x
BTT duck

Specifications

Cable length:	15 cm	Weight:	0.006 kg
Voltage:	5 v	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR01709

£16.23

£13.53 Excl. 20% VAT

14 day delivery

BigTreeTech TFT35-E3 v3.0.1 touch screen controller panel

BigTreeTech TFT35-E3 v3.0.1 touch screen controller panel DAR00713

Description Upgrade your 3D printer with this TFT35-E3 v3.0.1 Touch Screen Two Working Modes from Bigtreetech.

This 3.5inch touchscreen has a size of 93.35mm x 87mm. The display is made of wear-resistant glass and equipped with a high-quality backlight for a clear and bright screen display. Thanks to the high sensitivity of the screen, the screen responds quickly and efficiently to your prompts for added ease of use.

You simply connect the display via the TFT connector and the supplied mounting cable.

Specifications

Dimensions:	93.35 x 87 mm	Hazard class:	n/a
Input voltage:	DC 5V	Our item no:	DAR00713
Brand:	BigTreeTech

£38.50

£32.08 Excl. 20% VAT

14 day delivery

BigTreeTech TFT43 v3.0 touch screen controller panel

BigTreeTech TFT43 v3.0 touch screen controller panel DAR00234

Description Give your 3D printer an upgrade with this TFT43 touchscreen Two Working Modes from Bigtreetech.

This 4.8-inch touchscreen has a size of 143.65mm x 67.25mm with a resolution of 480 x 272 RGB. The display is made of wear-resistant glass and equipped with a high-quality backlight for a clear and bright screen display. Thanks to the high sensitivity of the screen, the screen responds quickly and efficiently to your prompts for added ease of use.

You simply connect the display via the TFT connector and the supplied mounting cable.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	143.65 x 67.25 mm	Hazard class:	n/a
Input voltage:	DC 5V	Our item no:	DAR00234
Brand:	BigTreeTech

£54.95

£45.79 Excl. 20% VAT

14 day delivery

BigTreeTech TFT70 v3.0 touch screen controller panel

BigTreeTech TFT70 v3.0 touch screen controller panel DAR00236

Description Give your 3D printer an upgrade with this TFT70 touchscreen Two Working Modes from Bigtreetech.

This 7 inch touchscreen has a size of 196mm x 100mm with a resolution of 800 x 480 RGB. The display is made of wear-resistant glass and equipped with a high-quality backlight for a clear and bright screen display. Thanks to the high sensitivity of the screen, the screen responds quickly and efficiently to your prompts for added ease of use.

You simply connect the display via the TFT connector and the supplied mounting cable.

Please note we do not offer support on the installation of this product.

Looking for other BigTreeTech displays? Click here!

Specifications

Dimensions:	196 x 100 mm	Hazard class:	n/a
Input voltage:	DC 5V	Our item no:	DAR00236
Brand:	BigTreeTech

Order now, we can ship this today!

£64.95

£54.13 Excl. 20% VAT

In stock

BigTreeTech UPS 24V v1.0

BigTreeTech UPS 24V v1.0 DAR00239

Description With this UPS module from BigTreeTech, your printer will automatically resume printing after a power failure.

This UPS V1.0 has a size of 52.53mm x 50mm and is easy to connect with the supplied cables.

NB: This product works with 24 volts. Before connecting this product, please check whether the power source is the same.

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	52.53 x 50 mm	Hazard class:	n/a
Input voltage:	24V	Our item no:	DAR00239
Brand:	BigTreeTech

£11.95

(sold out)

£9.96 Excl. 20% VAT

BigTreeTech SFS v1.0 smart filament detection sensor

BigTreeTech SFS v1.0 smart filament detection sensor DAR00248

Description Never let a 3D project fail due to filament problems with this SFS V1.0 filament detection sensor from BigTreeTech.

This high-quality sensor is suitable for almost any filament type with a size of 1.75mm and detects in time whether there is something wrong with your filament. Has the filament run out halfway through the print or does the filament appear to be broken for unforeseen reasons during printing? Then this smart filament sensor ensures that your 3D print is automatically paused so that you can solve the problem and your print can be successfully resumed.

The sensor has a response time of only 7mm, can be easily connected to different displays and is compatible with almost any motherboard with a break detection interface such as the SKR mini E3, SKR E3 DIP, SKR V1.3, MKS GEN L, MKS GEN V1.4 and more.

Specifications

Dimensions:	75 x 30 x 29.55 mm	Weight:	0.06 kg
Input voltage:	3.3V-5V	Hazard class:	n/a
Brand:	BigTreeTech	Our item no:	DAR00248

Order now, we can ship this today!

£14.65

£12.21 Excl. 20% VAT

In stock

BigTreeTech SKR PICO V1.0

BigTreeTech SKR PICO V1.0 DAR00704

Description BTT SKR Pico V1.0 is a custom motherboard designed for VORON V0 printer.

Brand new version for Voron V0 & V0.1.
Upgraded design and excellent performance, ideal choice for Voron users. The fuse kit consists of a fuse and holder, which allows for easy disassembly and installation. Type-C interface enables main control communication.

Perfect match with Raspberry Pi.
With the Raspberry Pi board frame, Raspberry Pi can be perfectly installed on BTT SKR Pico V1.0, saving internal space. SKR Pico's unique lateral seat design perfectly matches the space characteristics of the Voron V0 and V0.1 machine to be mounted longitudinally on the motherboard.

Silent printing & premium capacitors.
Equipped with TMC2209 mute driver UART mode, SKR PICO V1.0 supports mute 3D printing. The main version of the chip capacitor (MLCC) adopts high quality Murata capacitors to improve product quality.

Upgraded heat dissipation.
Improved heat sink design and enlarged heat dissipation area. The improved controllable fan is able to reduce the temperature of the entire machine when it is in operation.

Specifications

Dimensions:	85 x 56 mm	Hazard class:	n/a
Input voltage:	12-24V	Our item no:	DAR00704
Brand:	BigTreeTech

£24.05

£20.04 Excl. 20% VAT

14 day delivery

BigTreeTech Octopus Pro v1.1 (H723)

BigTreeTech Octopus Pro v1.1 (H723) DAR01182

2
1
0

Description With the BigTreeTech Octopus Pro v1.1 (H723) you choose a very stable and safe 3D printer motherboard. It supports Raspberry Pi and Octoprint operating systems and Klipper, Marlin and RRF firmware. The firmware can be updated via DFU mode, where the firmware does not require a bootloader, but is sent directly to the board from the PC. The Octopus Pro has several versions of MCUs, so you can choose the one that suits your needs. It is equipped with a 32-bit ARM-level Cortex-M4 series STM32H723ZET6/ STM32F407ZET6 / STM32F429ZGT6 / STM32F446ZET6 chip. The frequency goes up to 168 MHz and the flash is 1 MB.

Other functionalities

8 powerful motor drives for a more stable unit
8 isolation chips that protect the motherboard and a motherboard protective level conversion chip that converts a 3.3 V signal into a 5 V signal
STEP/DIR mode, UART mode and an SPI mode
Connect 6 CNC fans and 2 normal fans
Compatible with NTC100K & PT100/PT1000 high temperature
Supports up to 60 V - Supports proximity sensors, jumper optional pull-up resistor and BL touch
USB Type-C connection

Specifications

Dimensions:	160 x 100 mm	Brand:	BigTreeTech
Operating volt logic:	3.3V	Chip:	STM32H723ZE
Operating volt vmot:	-	Manual:	Download
Input voltage:	12-24V	Hazard class:	n/a
Processor:	ARM CORTEX M4	Stepper driver slots:	8
No of thermistors:	4	Our item no:	DAR01182
Flash memory:	-

£97.75

£81.46 Excl. 20% VAT

14 day delivery

BigTreeTech TMC2209 Step Driver | 1/256 step interpolation v1.3 | UART

BigTreeTech TMC2209 Step Driver | 1/256 step interpolation v1.3 | UART DAR01449

2
1
0

Description The BigTreeTech TMC2209 Step Driver makes skipping steps and jittering a thing of the past. The driver is super quiet and has good heat dissipation. You can choose from 2 modes: STEP/DIR mode and UART mode. In the STEP/DIR mode there are options for 16, 8, 4 or 2 microsteps. For UART mode, you can use both 4th and 5th pin as UART pin. The potentiometer can be adjusted to better suit your project. Turning this meter clockwise reduces the current supplied to the driver. Turning counterclockwise increases the driver's power supply. Be sure to properly mount the driver before using it for heat dissipation. This prevents the driver from working properly.

Please note: place the driver in the correct orientation on the motherboard. If the driver is placed incorrectly, it may burn out.

Specifications

Operating volt logic:	3.3 - 5V	Chip:	TMC2209
Input voltage:	-	Hazard class:	n/a
Max current:	2 A	Our item no:	DAR01449
Brand:	BigTreeTech	Replaces item no:	DAR00795

Order now, we can ship this today!

£7.10

£5.92 Excl. 20% VAT

In stock

BTT (FUN)CTIONALS - DeathRacer Kit

BTT (FUN)CTIONALS - DeathRacer Kit DAR02091

Description

The BTT (FUN)CTIONALS - DeathRacer Kit from Bigtreetech is a kit for an RC fighting robot that consists of 95% 3D printed parts. Inspired by the medieval knight fights from the United Kingdom, this kit offers 3D printing enthusiasts the opportunity to build their own "DeathRacer" and engage in exciting duels.

The kit only contains the required hardware components. To build the DeathRacer, you need 3D printing files, which you can download separately. You can find out all about this in the videos linked below.

1 x BTT Duck
42 x M3x8 mm countersunk head hexagon screw
18 x M3x20 countersunk head hexagon screw
12 x M3x14 countersunk head hexagon screw
46 x M3x10 mm countersunk head hexagon screw
19 x M3x10 mm countersunk head hexagon screw with tap
10 x M3x50 mm countersunk head hexagon screw
2 x M3x20 mm countersunk head hexagon screw
16 x M3x15 hexagon screw with lens head
16 x M3xH5xOD4 heatset insert
2 x LT-211 quick connector
2 x 550 brush motor 21T with plug
2 x planetary gear, 5.18 ratio, height 27 mm D6
2 x shaft flange 6 mm（H12, D10）
8 x 6802-RS bearings (15x24x5)
60 x SUS304 Pins OD2mm L50mm
2 x MG90S 180° mini servo
1 x 2-channel brushed ESC with XT60 connector
1 x aluminium housing standard servo 270° (25 kg)
1 x Killswitch wires 20awg 100 mm
1 x 1-3 custom servo splitter cable, length 100 mm
1 x Kill switch
1 x Flysky FSi6 6ch remote control
1 x CarbonFiber tube ID4 mm OD6 mm length 300 mm, drilled for Bludger
2 x CarbonFiber tube ID4 mm OD6 mm length 200 mm
1 x ESC fan, 4010 5V Dupont connector, cable length 100 mm

Specifications

Brand:	BigTreeTech	Our item no:	DAR02091
Hazard class:	n/a

£137.00

(sold out)

£114.17 Excl. 20% VAT

BigTreeTech Manta M8P Control Board V2.0

BigTreeTech Manta M8P Control Board V2.0 DAR02753

Description The Manta M8P V2.0 is a powerful and future-proof 32-bit control board for 3D printers, specifically designed for use with Klipper firmware. Thanks to its integrated architecture, this board combines microcontroller and host computing (via a core board such as BIGTREETECH CB1 or Raspberry Pi CM4) on a single PCB, which saves space, reduces cable clutter, and ensures a neat, reliable build.

Specifications

Operating volt logic:	3.3V	Hazard class:	n/a
Input voltage:	12-24V	Printer has USB:	yes
No of thermistors:	5	Stepper driver slots:	8
Brand:	BigTreeTech	Our item no:	DAR02753
USB version:	USB 2.0	Replaces item no:	DAR01024
Network:	work ethernet WiFi

£78.00

£65.00 Excl. 20% VAT

14 day delivery

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

Popular products

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

Nozzle set (5-pack)

Nozzle set (5-pack)

£34.00

© 2026 - 123-3d.co.uk