Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 01270 433 123
E: info@123-3D.co.uk
Free delivery over £30

Top Rated Seller

Payment options

Lots of popular payment options!

Follow us on social media

Official dealer

Official Prusa dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Black

View 2.85 mm PETG Black Filament here

25 - 48 of 48

Spectrum Filament PCTG Premium 1.75mm Traffic Black 1kg

Spectrum Filament PCTG Premium 1.75mm Traffic Black 1kg DFS10111

Description Spectrum's PCTG Premium filament is an ideal alternative to PET-G. This filament prints just as easily as PET-G, but offers improved impact resistance, high stability, and minimal shrinkage. PCTG has an HDT of 76°C, higher elasticity, and high chemical resistance. 3D prints made with Spectrum Premium PCTG transparent colors can achieve an almost completely transparent effect. You don't need a heated print chamber to 3D print with this filament. The filament is 1.75 mm, comes in Traffic Black, and weighs 1 kg on the spool.

Specifications

Material:	PCTG Premium	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	60 - 100 °C	Spool width:	6.7 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	250 - 270 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS10111
Brand:	Spectrum

£22.48

£18.73 Excl. 20% VAT

14 day delivery

Spectrum Filament PET-G Matt 1.75 mm Deep Black 1 kg

Spectrum Filament PET-G Matt 1.75 mm Deep Black 1 kg DFS10112

1
0

Description Go for 3D prints with a matte look with the PET-G Matt filament from Spectrum. Thanks to this look, the layer lines are less visible. In addition, this filament is easy to print, shrinks little and has good adhesion between layers. This filament also remains well attached to the build plate during printing. Finally, it has improved temperature resistance, impact resistance and is less brittle. This filament is 1.75 mm, comes in the color Deep Black and has 1 Kg on the spool.

Specifications

Material:	PETG Matt	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	60 - 80 °C	Spool width:	6.7 cm
Colour:	Black	Filament print speed:	-
Nozzle temp range:	230 - 255 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS10112
Brand:	Spectrum

£26.80

£22.33 Excl. 20% VAT

14 day delivery

Spectrum Filament PET-G Carbon 1.75 mm Black 0.5 kg

Spectrum Filament PET-G Carbon 1.75 mm Black 0.5 kg DFS10116

1
0

Description PET-G Carbon filament from Spectrum is a modified PET-G filament with 10% added carbon particles. This gives it a higher stiffness, hardness and tensile strength, while it shrinks little and adheres well to the build plate. Your 3D prints will have a matte appearance, making the layer lines less visible. This filament is 1.75 mm, comes in the color Black and has 0.5 Kg on the spool.

Specifications

Material:	PETG Carbon	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.5 cm
Colour:	Black	Filament print speed:	-
Nozzle temp range:	230 - 255 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFS10116
Brand:	Spectrum

£27.65

£23.04 Excl. 20% VAT

14 day delivery

REAL black PETG filament 1.75mm, 1kg

REAL black PETG filament 1.75mm, 1kg DFE02012

Description The black PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Material:	PETG	Brand:	REAL
Filament diameter:	1.75 mm	RAL colour no:	9017
Heated bed temp:	30 - 60 °C	Roundness:	>95%
Colour:	Black	Outer diameter:	Ø 20.0 cm
Nozzle temp range:	220 - 250 °C	Inner diameter:	Ø 5.5 cm
Max deviation:	± 0.05 mm	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	340 m	Our item no:	DFE02012

£14.00 (sold out)

£11.67 Excl. 20% VAT

Spectrum Filament PET-G Carbon 1.75 mm Black 1 kg

Spectrum Filament PET-G Carbon 1.75 mm Black 1 kg DFS10117

1
0

Description PET-G Carbon filament from Spectrum is a modified PET-G filament with 10% added carbon particles. This gives it a higher stiffness, hardness and tensile strength, while it shrinks little and adheres well to the build plate. Your 3D prints will have a matte appearance, making the layer lines less visible. This filament is 1.75 mm, comes in the color Black and has 1 Kg on the spool.

Specifications

Material:	PETG Carbon	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	60 - 80 °C	Spool width:	6.7 cm
Colour:	Black	Filament print speed:	-
Nozzle temp range:	230 - 255 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS10117
Brand:	Spectrum

£46.10 (sold out)

£38.42 Excl. 20% VAT

123-3D PETG Pellets 1 kg

123-3D PETG Pellets 1 kg DPL00002

Description PETG pellets can be used by enthusiastic DIY'ers to make PETG filament themselves. The pellets can also be used with a Direct pellet extruder on a 3D printer. This bag contains 1 kg of undried pellets, to which no dyes have yet been added.

Specifications

Colour:	Neutral	Hazard class:	n/a
Amount:	1 kg	Our item no:	DPL00002
Brand:	123-3D

Order now, we can ship this tomorrow!

£9.50

£7.92 Excl. 20% VAT

In stock

REAL neutral PVA Plus filament 1.75mm, 0.5kg

REAL neutral PVA Plus filament 1.75mm, 0.5kg DFV02002

Description This neutral PVA Plus is the ideal support filament (1.75mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PLA Plus is ideal in combination with PETG and has a maximum print temperature of 225°C.

Specifications

Material:	PVA PLUS	Brand:	REAL
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Outer diameter:	Ø 20.0 cm
Colour:	Neutral	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	235 - 255 °C	Spool width:	4.5 cm
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFV02002
Length:	170 m

Order now, we can ship this tomorrow!

£40.76

£33.97 Excl. 20% VAT

In stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Type:	glue stick	Hazard class:	n/a
Volume:	50	Our item no:	DCP00205

Order now, we can ship this tomorrow!

£15.75

£13.13 Excl. 20% VAT

In stock

Magigoo 3D glue stick, 120ml

Magigoo 3D glue stick, 120ml DCP00206

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Type:	glue stick	Hazard class:	n/a
Volume:	120	Our item no:	DCP00206

Order now, we can ship this tomorrow!

£41.95

£34.96 Excl. 20% VAT

In stock

3DLAC stick (80ml)

3DLAC stick (80ml) DAR00884

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884
Brand:	3DLAC

Order now, we can ship this tomorrow!

£5.10

£4.25 Excl. 20% VAT

In stock

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Diameter:	30 mm	Brand:	3DLAC
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this tomorrow!

£6.29

£5.24 Excl. 20% VAT

In stock

3D print post-processing set

3D print post-processing set DAR00620

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Material:	Steel	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR00620

Order now, we can ship this tomorrow!

£8.25

£6.88 Excl. 20% VAT

In stock

Smart bluetooth hygrometer

Smart bluetooth hygrometer DRW00069

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, bathroom or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Colour:	White	Hazard class:	n/a
Brand:	123-3D	Our item no:	DRW00069

Order now, we can ship this tomorrow!

£9.95

£8.29 Excl. 20% VAT

In stock

eSun eVacuum kit Pro 3

eSun eVacuum kit Pro 3 DAR01277

Description Keep your filament dry and dust free with the eSun eVacuum kit Pro 3. This kit allows you to vacuum seal your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-colored closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Dimensions:	32 x 32 x 102 mm	Weight:	0.075 kg
Voltage:	5 v	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01277

Order now, we can ship this tomorrow!

£20.39

£16.99 Excl. 20% VAT

In stock

Smooth-On XTC-3D coating (181 gr = A+B)

Smooth-On XTC-3D coating (181 gr = A+B) DAR00876

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Brand:	Smooth-On	Hazard class:	n/a
Volume:	181 grams	Our item no:	DAR00876

Order now, we can ship this tomorrow!

£20.49

£17.08 Excl. 20% VAT

In stock

SUNLU Filament Connector

SUNLU Filament Connector DAR01819

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different color. This way you can create personalized 3D prints with unique colorful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Sunlu	Our item no:	DAR01819

Order now, we can ship this tomorrow!

£39.95

£33.29 Excl. 20% VAT

In stock

SUNLU FilaDryer S2 drybox

SUNLU FilaDryer S2 drybox DAR00698

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Dimensions:	265 x 118 x 274 mm	Voltage:	24 v
Power rating:	48 W	Brand:	Sunlu
Input voltage:	100-240V	Weight:	11.9 kg
Temp range:	35-70 °C	Hazard class:	n/a
Colour:	Black	Our item no:	DAR00698

Order now, we can ship this tomorrow!

£44.90

£37.42 Excl. 20% VAT

In stock

Smooth-On XTC-3D coating (644 gr = A+B)

Smooth-On XTC-3D coating (644 gr = A+B) DAR00877

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Brand:	Smooth-On	Hazard class:	n/a
Volume:	644 grams	Our item no:	DAR00877

Order now, we can ship this tomorrow!

£51.50

£42.92 Excl. 20% VAT

In stock

Polymaker PolyBox™ Edition II filament drybox

Polymaker PolyBox™ Edition II filament drybox DAR00634

Description The Polymaker PolyBox™ Edition II filament drybox prevents your filament from getting damp. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or one 3kg roll. 3kg Polymaker brand spools are compatible with this drybox, but our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Dimensions:	315 x 190 x 310 mm	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DAR00634
Weight:	1.15 kg

Order now, we can ship this tomorrow!

£54.98

£45.82 Excl. 20% VAT

In stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	30 W	Brand:	Modifi3D
Max operating temp:	450 °C	Weight:	0.12 kg
Voltage:	24 v	Hazard class:	n/a
Cable length:	150 cm	Our item no:	DGS00090

Order now, we can ship this tomorrow!

£65.50

£54.58 Excl. 20% VAT

In stock

SUNLU FilaDryer S4

SUNLU FilaDryer S4 DAR01448

2
1
0

Description Keep your filament dry and in perfect condition with the S4 Drybox from SUNLU. There is room for no less than 4 spools of 1 kg, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0 mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458 x 218 x 312 mm.

Specifications

Dimensions:	516 x 278 x 350 mm	Weight:	4.8 kg
Power rating:	320 W	Hazard class:	n/a
Input voltage:	110-240V	Our item no:	DAR01448
Brand:	Sunlu

Order now, we can ship this tomorrow!

£105.00

£87.50 Excl. 20% VAT

In stock

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007
Brand:	Tesa

£3.90

£3.25 Excl. 20% VAT

14 day delivery

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007
Brand:	Modifi3D

Extra information

Instructional video

£29.95

£24.96 Excl. 20% VAT

14 day delivery

123-3D Adhesive Spray (150 ml)

123-3D Adhesive Spray (150 ml) DAR02393

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Brand:	123-3D	Our item no:	DAR02393
Hazard class:	n/a

£6.50 (sold out)

£5.42 Excl. 20% VAT

Quantity	Product
No products
Total: £0.00

Popular products

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg

123-3D Filament PLA Starterpack Black, White, Red, Grey and Blue 1.75mm 1kg

£70.00

© 2025 - 123-3d.co.uk