View all flexible filaments Flexible Filament View by property 3D filament 2.85mm 123-3D white TPE Filament 2.85mm, 0.5kg 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 01270 433 123
E: info@123-3D.co.uk
Free delivery over £10

Lots of popular payment options!

Official Prusa dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: £0.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

Nozzle set (5-pack)

Nozzle set (5-pack)

£34.00

BASF Ultrafuse blue TPC 45D filament 2.85mm, 0.5kg

BASF Ultrafuse blue TPC 45D filament 2.85mm, 0.5kg DFB00211

Description The blue Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	5002
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Inner diameter:	Ø 4.9 cm
Colour:	Blue	Spool width:	5.7 cm
Nozzle temp range:	230 - 250 °C	Filament print speed:	-
Amount:	0.5 kg	Hazard class:	n/a
Brand:	BASF	Our item no:	DFB00211

£24.88

£20.73 Excl. 20% VAT

14 day delivery

BASF Ultrafuse yellow TPC 45D filament 2.85mm, 0.5kg

BASF Ultrafuse yellow TPC 45D filament 2.85mm, 0.5kg DFB00212

Description The yellow Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	1003
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Inner diameter:	Ø 4.9 cm
Colour:	Yellow	Spool width:	5.7 cm
Nozzle temp range:	230 - 250 °C	Filament print speed:	-
Amount:	0.5 kg	Hazard class:	n/a
Brand:	BASF	Our item no:	DFB00212

£24.88 (sold out)

£20.73 Excl. 20% VAT

BASF Ultrafuse green TPC 45D filament 2.85mm, 0.5kg

BASF Ultrafuse green TPC 45D filament 2.85mm, 0.5kg DFB00213

Description This green Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	6018
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Inner diameter:	Ø 4.9 cm
Colour:	Green	Spool width:	5.7 cm
Nozzle temp range:	230 - 250 °C	Filament print speed:	-
Amount:	0.5 kg	Hazard class:	n/a
Brand:	BASF	Our item no:	DFB00213

£24.88 (sold out)

£20.73 Excl. 20% VAT

BASF Ultrafuse neutral TPC 45D filament 2.85mm, 0.5kg

BASF Ultrafuse neutral TPC 45D filament 2.85mm, 0.5kg DFB00214

Description The neutral colour Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Colour:	Neutral	Filament print speed:	-
Nozzle temp range:	230 - 250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00214
Brand:	BASF

£24.88 (sold out)

£20.73 Excl. 20% VAT

BASF Ultrafuse orange TPC 45D filament 2.85mm, 0.5kg

BASF Ultrafuse orange TPC 45D filament 2.85mm, 0.5kg DFB00215

Description This orange Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	2008
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Inner diameter:	Ø 4.9 cm
Colour:	Orange	Spool width:	5.7 cm
Nozzle temp range:	230 - 250 °C	Filament print speed:	-
Amount:	0.5 kg	Hazard class:	n/a
Brand:	BASF	Our item no:	DFB00215

£24.88 (sold out)

£20.73 Excl. 20% VAT

BASF Ultrafuse red TPC 45D filament 2.85mm 0.5kg

BASF Ultrafuse red TPC 45D filament 2.85mm 0.5kg DFB00216

Description The red Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	3020
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Inner diameter:	Ø 4.9 cm
Colour:	Red	Spool width:	5.7 cm
Nozzle temp range:	230 - 250 °C	Filament print speed:	-
Amount:	0.5 kg	Hazard class:	n/a
Brand:	BASF	Our item no:	DFB00216

£24.88 (sold out)

£20.73 Excl. 20% VAT

BASF Ultrafuse pink TPC 45D filament 2.85mm, 0.5kg

BASF Ultrafuse pink TPC 45D filament 2.85mm, 0.5kg DFB00217

Description This pink Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Colour:	Pink	Filament print speed:	-
Nozzle temp range:	230 - 250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00217
Brand:	BASF

£24.88

£20.73 Excl. 20% VAT

14 day delivery

BASF Ultrafuse silver TPC 45D filament 2.85mm, 0.5kg

BASF Ultrafuse silver TPC 45D filament 2.85mm, 0.5kg DFB00218

Description This silver Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	9006
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Inner diameter:	Ø 4.9 cm
Colour:	Silver	Spool width:	5.7 cm
Nozzle temp range:	230 - 250 °C	Filament print speed:	-
Amount:	0.5 kg	Hazard class:	n/a
Brand:	BASF	Our item no:	DFB00218

£24.88 (sold out)

£20.73 Excl. 20% VAT

BASF Ultrafuse transparent TPU 85A filament 2.85mm, 0.75kg

BASF Ultrafuse transparent TPU 85A filament 2.85mm, 0.75kg DFB00223

Description This transparent BASF Ultrafuse filament with a diameter of 2.85mm consists of high-quality TPU. Thanks to the shore hardness of 85A, this material is very strong and wear-resistant. Other advantages of the BASF Ultrafuse 85A filament are: high tensile strength, excellent damping, flexibility at low temperatures and high resistance to grease, oxygen and ozone.

The ideal printing temperature is 200°C to 220°C. For best results, use a heated bed of 40°C.

Specifications

Material:	TPU 85A	Brand:	BASF
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40 °C	Inner diameter:	Ø 5.2 cm
Colour:	Transparent	Spool width:	5.2 cm
Nozzle temp range:	200 - 220 °C	Filament print speed:	-
Amount:	0.75 kg	Hazard class:	n/a
Hardness:	NINJAFLEX	Our item no:	DFB00223

£39.00

£32.50 Excl. 20% VAT

14 day delivery

NinjaTek Chinchilla NT snow white TPE filament 2.85mm, 0.5kg

NinjaTek Chinchilla NT snow white TPE filament 2.85mm, 0.5kg DFF02102

Description This snow white NinjaTek Chinchilla NT filament is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 0.5kg roll contains 2.85mm of filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Material:	TPU	Brand:	NinjaTek
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 40 °C	Inner diameter:	Ø 5.1 cm
Colour:	Snow White	Spool width:	5.5 cm
Nozzle temp range:	225 - 235 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF02102
Hardness:	75A

£44.59

£37.16 Excl. 20% VAT

14 day delivery

NinjaTek Chinchilla NT midnight black TPE filament 3mm, 0.5kg

NinjaTek Chinchilla NT midnight black TPE filament 3mm, 0.5kg DFF02106

Description This midnight black NinjaTek Chinchilla NT is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 1kg roll contains 1.75mm of filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Material:	TPU	Brand:	NinjaTek
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 40 °C	Inner diameter:	Ø 5.1 cm
Colour:	Midnight Black	Spool width:	5.5 cm
Nozzle temp range:	225 - 235 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF02106
Hardness:	75A

This product can be ordered 1 time(s).

Order now, we can ship this tomorrow!

£44.59

£37.16 Excl. 20% VAT

In stock

NinjaTek Chinchilla NT midnight black TPE filament 3mm, 1kg

NinjaTek Chinchilla NT midnight black TPE filament 3mm, 1kg DFF02108

Description This midnight black NinjaTek Chinchilla NT filament is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing
soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 1kg roll contains 3mm filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Material:	TPU	Brand:	NinjaTek
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 40 °C	Inner diameter:	Ø 5.1 cm
Colour:	Midnight Black	Spool width:	5.5 cm
Nozzle temp range:	225 - 235 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFF02108
Hardness:	75A

This product is end of life.

REAL blue TPU 98A filament 2.85mm, 0.5kg

REAL blue TPU 98A filament 2.85mm, 0.5kg DFF03015

Description This blue 98A TPU filament with a diameter of 2.85mm is ideal for printing flexible parts such as smartphone cases or anti-slip objects.

The filament has an optimum print temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30mm/s to 40mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.

Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament a little more difficult to process. To prevent the filament from jamming or being pushed in the wrong direction during printing, the extruder should support the material as much as possible. Read more about the use of flexible TPU and TPE filament here.

TIP: prevent holes in your 3D print by storing the filament airtight in a dry place.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Material:	TPU	Brand:	REAL
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 20.0 cm
Colour:	Blue	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	225 - 245 °C	Spool width:	4.5 cm
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF03015
Hardness:	98A

£33.11

£27.59 Excl. 20% VAT

14 day delivery

123-3D white TPE Filament 2.85mm, 0.5kg

123-3D white TPE Filament 2.85mm, 0.5kg DFF08007

Description The white TPE flexible filaments from 123-3d.co.uk have the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So, first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Material:	TPE	Brand:	123-3D
Filament diameter:	2.85 mm	RAL colour no:	9003
Heated bed temp:	0 - 95 °C	Roundness:	>95%
Colour:	White	Outer diameter:	Ø 20.0 cm
Nozzle temp range:	220 - 260 °C	Inner diameter:	Ø 5.2 cm
Max deviation:	± 0.10 mm	Spool width:	5.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	45D	Our item no:	DFF08007
Length:	70 m

£24.23

£20.19 Excl. 20% VAT

14 day delivery

123-3D red flexible TPE filament 2.85mm, 0.5kg

123-3D red flexible TPE filament 2.85mm, 0.5kg DFF08008

Description The red TPE flexible filament from 123-3d.co.uk has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So, first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Material:	TPE	Brand:	123-3D
Filament diameter:	2.85 mm	RAL colour no:	3020
Heated bed temp:	0 - 95 °C	Roundness:	>95%
Colour:	Red	Outer diameter:	Ø 20.0 cm
Nozzle temp range:	220 - 260 °C	Inner diameter:	Ø 5.2 cm
Max deviation:	± 0.10 mm	Spool width:	5.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	45D	Our item no:	DFF08008
Length:	70 m

£25.08

£20.90 Excl. 20% VAT

14 day delivery

REAL neutral PVA filament 2.85mm, 0.5kg

REAL neutral PVA filament 2.85mm, 0.5kg DFP02385

Description This Real PVA (PolyVinylAlcohol) 2.85mm filament is a (warm) water-soluble filament that is ideal for use as a support when printing objects with PLA or ABS. This allows you to print objects that would otherwise not be possible. Because the PVA filament reacts very quickly with water, it is very important to store the coil at room temperature under conditions that are as dry as possible after opening. The heated bed can be set to the same temperature as for ABS or PLA.

The maximum printing temperature is 210°C

Read more about printing with PVA filament here .

Compatible with printers from the following brands:
	●	BCN3D	●	LulzBot
	●	Printrbot	●	Ultimaker

Specifications

Material:	PVA	Roundness:	>95%
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Inner diameter:	Ø 5.6 cm
Colour:	Neutral	Spool width:	7.0 cm
Nozzle temp range:	190 - 210 °C	Hazard class:	n/a
Max deviation:	± 0.10 mm	Our item no:	DFP02385
Amount:	0.5 kg	Replaces item no:	DFV02001
Brand:	REAL

Order now, we can ship this tomorrow!

£33.96

£28.30 Excl. 20% VAT

In stock

colorFabb varioShore black TPU filament 2.85mm, 0.7kg

colorFabb varioShore black TPU filament 2.85mm, 0.7kg DFP13170

Description The black colorFabb filament is high-quality and lightweight TPU with a diameter of 2.85mm. You determine the shore hardness of the material by adjusting the temperature and throughput (speed and layer height). At temperatures between 200°C and 250°C, the material expands and softens. At a temperature between 190°C and 200°C, you create harder prints. We advise you to choose this filament if you want to print insoles and cosplay parts, for example.

The ideal print temperature is 190°C to 250°C. For best results, use a heated bed of 20°C to 40°C.

Specifications

Material:	TPU	Brand:	colorFabb
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 40 °C	Inner diameter:	Ø 5.2 cm
Colour:	Black	Spool width:	5.5 cm
Nozzle temp range:	190 - 250 °C	Filament print speed:	-
Max deviation:	± 0.10 mm	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13170
Length:	90 m

This product can be ordered 1 time(s).

Order now, we can ship this tomorrow!

£38.00

£31.67 Excl. 20% VAT

In stock

Polymaker PolyDissolve natural S1 filament 2.85mm, 0.75kg

Polymaker PolyDissolve natural S1 filament 2.85mm, 0.75kg DFP14011

Description Polymaker Polydissolve S1 is a soluble filament in the colour natural. With this filament, you have greater design freedom because many new applications are possible. Polydissolve S1 is a water-soluble support material for filaments based on PLA, TPU, PVB and Nylon. It has perfect adhesion with these materials and at the same time offers good solubility. The natural filament has a diameter of 2.85mm and a weight of 0.75kg.

Specifications

Material:	PolyDissolve S1	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm
Colour:	Natural	Filament print speed:	-
Nozzle temp range:	210 - 225 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14011
Brand:	Polymaker

£55.85

£46.54 Excl. 20% VAT

14 day delivery

Polymaker PolyFlex grey TPU90 filament 2.85mm, 0.75kg

Polymaker PolyFlex grey TPU90 filament 2.85mm, 0.75kg DFP14017

Description This grey Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 90A and is highly resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you can print at high speeds. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Specifications

Material:	TPU90	Brand:	Polymaker
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Inner diameter:	Ø 5.5 cm
Colour:	Grey	Spool width:	4.5 cm
Nozzle temp range:	210 - 230 °C	Filament print speed:	-
Amount:	0.75 kg	Hazard class:	n/a
Hardness:	90A	Our item no:	DFP14017

This product can be ordered 1 time(s).

Order now, we can ship this tomorrow!

£25.00

£20.83 Excl. 20% VAT

In stock

Polymaker PolyFlex black TPU90 filament 2.85mm, 0.75kg

Polymaker PolyFlex black TPU90 filament 2.85mm, 0.75kg DFP14019

Description The black Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 90A and is highly resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Specifications

Material:	TPU90	Brand:	Polymaker
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Inner diameter:	Ø 5.5 cm
Colour:	Black	Spool width:	4.5 cm
Nozzle temp range:	210 - 230 °C	Filament print speed:	-
Amount:	0.75 kg	Hazard class:	n/a
Hardness:	90A	Our item no:	DFP14019

£33.82

£28.18 Excl. 20% VAT

14 day delivery

Polymaker PolyFlex white TPU90 filament 2.85mm, 0.75kg

Polymaker PolyFlex white TPU90 filament 2.85mm, 0.75kg DFP14021

Description The white Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 90A and is highly resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Specifications

Material:	TPU90	Brand:	Polymaker
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Inner diameter:	Ø 5.5 cm
Colour:	White	Spool width:	4.5 cm
Nozzle temp range:	210 - 230 °C	Filament print speed:	-
Amount:	0.75 kg	Hazard class:	n/a
Hardness:	90A	Our item no:	DFP14021

£31.39 (sold out)

£26.16 Excl. 20% VAT

Polymaker PolyFlex orange TPU95 filament 2.85mm, 0.75kg

Polymaker PolyFlex orange TPU95 filament 2.85mm, 0.75kg DFP14025

Description The orange Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 95A and is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Specifications

Material:	TPU95	Brand:	Polymaker
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Inner diameter:	Ø 5.5 cm
Colour:	Orange	Spool width:	4.5 cm
Nozzle temp range:	210 - 230 °C	Filament print speed:	-
Amount:	0.75 kg	Hazard class:	n/a
Hardness:	95A	Our item no:	DFP14025

Order now, we can ship this tomorrow!

£21.00

£17.50 Excl. 20% VAT

In stock

Polymaker PolyFlex black TPU95 filament 2.85mm, 0.75kg

Polymaker PolyFlex black TPU95 filament 2.85mm, 0.75kg DFP14027

Description The black Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 95A and is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Specifications

Material:	TPU95	Brand:	Polymaker
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Inner diameter:	Ø 5.5 cm
Colour:	Black	Spool width:	4.5 cm
Nozzle temp range:	210 - 230 °C	Filament print speed:	-
Amount:	0.75 kg	Hazard class:	n/a
Hardness:	95A	Our item no:	DFP14027

Order now, we can ship this tomorrow!

£28.00

£23.33 Excl. 20% VAT

In stock

Polymaker PolyFlex black TPU95-HF filament 2.85mm, 1kg

Polymaker PolyFlex black TPU95-HF filament 2.85mm, 1kg DFP14029

Description The black Polymaker PolyFlex TPU95-HF is a high-quality and flexible filament with a diameter of 2.85mm. This durable material is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal printing temperature is 200°C to 220°C. For best results, use a heated bed of 25°C to 50°C.

Specifications

Material:	TPU95-HF	Brand:	Polymaker
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 50 °C	Inner diameter:	Ø 5.5 cm
Colour:	Black	Spool width:	6.8 cm
Nozzle temp range:	200 - 220 °C	Filament print speed:	-
Amount:	1 kg	Hazard class:	n/a
Hardness:	95A	Our item no:	DFP14029

Order now, we can ship this tomorrow!

£31.50

£26.25 Excl. 20% VAT

In stock

Polymaker PolyFlex white TPU95 filament 2.85mm, 0.75kg

Polymaker PolyFlex white TPU95 filament 2.85mm, 0.75kg DFP14031

Description The white Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 95A and is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Specifications

Material:	TPU95	Brand:	Polymaker
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Inner diameter:	Ø 5.5 cm
Colour:	White	Spool width:	4.5 cm
Nozzle temp range:	210 - 230 °C	Filament print speed:	-
Amount:	0.75 kg	Hazard class:	n/a
Hardness:	95A	Our item no:	DFP14031

Order now, we can ship this tomorrow!

£24.00

£20.00 Excl. 20% VAT

In stock

Polymaker PolyFlex blue TPU95 filament 2.85mm, 0.75kg

Polymaker PolyFlex blue TPU95 filament 2.85mm, 0.75kg DFP14177

Description The blue Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 95A and is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Specifications

Material:	TPU95	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm
Colour:	Blue	Filament print speed:	-
Nozzle temp range:	210 - 230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14177
Brand:	Polymaker

Order now, we can ship this tomorrow!

£25.00

£20.83 Excl. 20% VAT

In stock

Polymaker PolyFlex red TPU95 filament 2.85mm, 0.75kg

Polymaker PolyFlex red TPU95 filament 2.85mm, 0.75kg DFP14179

Description The red Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 95A and is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Specifications

Material:	TPU95A	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm
Colour:	Red	Filament print speed:	-
Nozzle temp range:	210 - 230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14179
Brand:	Polymaker

Order now, we can ship this tomorrow!

£20.00

£16.67 Excl. 20% VAT

In stock

Polymaker PolyFlex TPU-90A filament 2.85mm Clear 0.75 kg

Polymaker PolyFlex TPU-90A filament 2.85mm Clear 0.75 kg DFP14370

Description The neutrally transparent Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 90A and is resistant to high tensile force, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone covers, for example.

The ideal printing temperature is 210 to 230 °C. For best results, use a heated bed at 25 to 60 °C.

Specifications

Material:	TPU90	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm
Colour:	Transparent	Filament print speed:	-
Nozzle temp range:	210 - 230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14370
Brand:	Polymaker

Order now, we can ship this tomorrow!

£31.50

£26.25 Excl. 20% VAT

In stock

© 2025 - 123-3d.co.uk