1.75mm Nylon Filament

eSun ePA Nylon filament 1.75mm Neutral 1kg

Description

Specifications

Material:	ePA	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Inner diameter:	Ø 5.0 cm
Colour:	Neutral	Spool width:	6.5 cm
Nozzle temp range:	240 - 260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20038

£26.00

£21.67 Excl. 20% VAT

In stock

eSun ePA-CF Nylon with carbon fibre filament 1.75mm Neutral 1kg

Zoom in

Description

Specifications

Material:	ePA-CF	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Inner diameter:	Ø 5.0 cm
Colour:	Black	Spool width:	6.5 cm
Nozzle temp range:	260 - 300 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20040

£35.00

£29.17 Excl. 20% VAT

In stock

eSun ePA12 filament 1.75mm Black 1 kg (Nylon)

Zoom in

Description This black eSun ePA12 filament is ideal for making durable prints. ePA12 prints very well and is more resistant to wear. It is based on PA12 and absorbs less moisture than other filaments, meaning your print is less affected by humidity and temperature changes. The filament shrinks little, is not easy to deform and does not break during printing.

This filament is strong, has a high impact resistance and is very resistant to higher temperatures. Prints from ePA12 will only deform at 100°C, which makes it ideal for printing parts that have to perform at higher temperatures.

Specifications

Material:	ePA12	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 90 °C	Inner diameter:	Ø 5.0 cm
Colour:	Black	Spool width:	6.5 cm
Nozzle temp range:	260 - 290 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20234

£50.00

£41.67 Excl. 20% VAT

In stock

eSun ePA12 filament 1.75mm White 1 kg (Nylon)

Zoom in

Description This white eSun ePA12 filament is ideal for making durable prints. ePA12 prints very well and is more resistant to wear. It is based on PA12 and absorbs less moisture than other filaments, meaning your print is less affected by humidity and temperature changes. The filament shrinks little, is not easy to deform and does not break during printing.

This filament is strong, has a high impact resistance and is very resistant to higher temperatures. Prints from ePA12 will only deform at 100°C, which makes it ideal for printing parts that have to perform at higher temperatures.

Specifications

Material:	ePA12	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 90 °C	Inner diameter:	Ø 5.0 cm
Colour:	White	Spool width:	6.5 cm
Nozzle temp range:	260 - 290 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20235

£50.00

£41.67 Excl. 20% VAT

In stock

eSun ePA12-CF filament 1.75mm Natural 1 kg (Nylon)

Zoom in

Description This ePA12-CF filament from eSun is based on PA12 with the additional addition of 15% carbon fibers. These enhance the strength, severity and strength of the nylon and even make it possible to use this filament as a replacement for metal in many situations. Because it absorbs little moisture, prints made from this material are more resistant to humidity and temperature changes. This filament is ideal for printing parts such as gears, because it is self-lubricating and can withstand frequent use.

For long-term use, ePA12-CF can function well at temperatures up to 120 °C. For short-term use it can withstand a temperature of up to 160 °C. The filament shrinks little, is not easy to deform and does not break during printing. It is refined and has a matte appearance.

Specifications

Material:	ePA12-CF	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Inner diameter:	Ø 5.0 cm
Colour:	Natural	Spool width:	6.5 cm
Nozzle temp range:	270 - 300 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20236

£69.00

£57.50 Excl. 20% VAT

In stock

eSun ePAHT-CF filament 1.75mm Natural 0.75 kg

Zoom in

Description This eSun ePAHT-CF filament is based on PA6 with an addition of 15% carbon fibers. The high strength, stiffness, mechanical and thermal properties are even better than other nylon filaments from eSun. In many cases, ePAHT-CF can be used as a replacement for metal. This makes it perfect for printing robot, drone and aviation parts.

For long-term use, ePAHT-CF can function well at temperatures up to 150 °C. For short-term use it can withstand a temperature of up to 180 °C. The filament shrinks little, is not easy to deform and does not break during printing. It is refined and has a matte appearance.

Please note :

For best results, dry ePAHT-CF at 70 °C/>12H and print with a skirt around your model.
Because it is not easy to bend, it is advisable to avoid excessive bending of the wire as much as possible.
The added carbon fibers in ePAHT-CF ensure that you can better print this filament with a hard steel nozzle or a ruby nozzle. We also recommend a hard steel extruder.

Specifications

Material:	ePAHT-CF	Brand:	eSun
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Inner diameter:	Ø 5.6 cm
Colour:	Natural	Spool width:	6.3 cm
Nozzle temp range:	260 - 300 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFE20238

£74.50

£62.08 Excl. 20% VAT

14 day delivery

Quantity	Product
No products
Total: £0.00

1.75mm Nylon Filament

Popular products