E3D

121 - 144 of 270

E3D brass Volcano nozzle, 2.8mm x 0.4mm DED00048

Description This E3D volcano nozzle has an opening of 0.4mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Material:	Brass	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00048

Nozzle diameter:

£6.50

£5.42 Excl. 20% VAT

14 day delivery

E3D V6 Bowden coupling, 1.75mm

Zoom in

Description This high-quality pneumatic push fit coupling can be mounted directly on an E3D bowden heatsink. The coupling can also be used for other components where a PTFE (Teflon) tube is desired. The coupling has a 1/8" thread and is fully drilled out, allowing a PTFE (Teflon) tube to run through in its entirety.

Suitable for PTFE (Teflon) pipe with an outer diameter of 4mm.

Specifications

Screw thread length:	8 mm	Hazard class:	n/a
Thread size:	-	Our item no:	DED00050
Brand:	E3D

Order now, we can ship this tomorrow!

£2.00

£1.67 Excl. 20% VAT

In stock

E3D nozzle wrench, 7mm

Zoom in

Description Use this wrench to carefully attach your E3D nozzle.

Specifications

Material:	Steel	Hazard class:	n/a
Brand:	E3D	Our item no:	DED00053

£2.20 (sold out)

£1.83 Excl. 20% VAT

E3D semitec thermistor incl. sleeving 100k Ohm

Zoom in

Description This 100k thermistor is supplied with fiberglass insulation.

For the Marlin firmware you need the following setting:

#TEMP_SENSOR_N 5

Specifications

Max temp:	300 °C	Hazard class:	n/a
Brand:	E3D	Our item no:	DED00054

Order now, we can ship this tomorrow!

£5.75

£4.79 Excl. 20% VAT

In stock

E3D v6 nozzle hardened steel, 1.75mm x 0.25 mm

Zoom in

Description The replacement v6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.25 mm (marking #0) and is suitable for filament with a diameter of 1.75mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	0.25 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00057

Nozzle diameter:

Order now, we can ship this tomorrow!

£18.95

£15.79 Excl. 20% VAT

In stock

E3D V6 hardened steel nozzle, 1.75mm x 0.80mm

Zoom in

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.8mm (marking #5) and is suitable for filament with a diameter of 1.75mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	0.8 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00058

Nozzle diameter:

Order now, we can ship this tomorrow!

£18.95

£15.79 Excl. 20% VAT

In stock

E3D V6 hardened steel nozzle, 2.85mm x 0.25mm

Zoom in

Description The replacement v6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.25mm (marking #0) and is suitable for filament with a diameter of 3mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	0.25 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00059

Nozzle diameter:

0.25 mm

0.4 mm

0.8 mm

£18.95

£15.79 Excl. 20% VAT

14 day delivery

E3D V6 hardened steel nozzle, 2.85mm x 0.40mm

Zoom in

Description The replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm (marking #3) and is suitable for filament with a diameter of 3mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00060

Nozzle diameter:

0.25 mm

0.4 mm

0.8 mm

Order now, we can ship this tomorrow!

£18.95

£15.79 Excl. 20% VAT

In stock

E3D Volcano hardened steel nozzle, 2.85mm x 0.40mm

Zoom in

Description The replacement V6 nozzle for Volcano E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for highly specialised materials, where a standard brass nozzle runs the risk of corroding. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm and is suitable for filament with a diameter of 2.85mm.

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00066

Nozzle diameter:

0.4 mm

1 mm

1.2 mm

Order now, we can ship this tomorrow!

£21.50

£17.92 Excl. 20% VAT

In stock

E3D Volcano hardened steel nozzle, 2.85mm x 1.20mm

Zoom in

Description This replacement V6 nozzle for the Volcano E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 1.2mm and is suitable for filament with a diameter of 2.85mm

Specifications

Material:	Steel	Brand:	E3D
Filament diameter:	2.85 mm	Nozzle coating:	none
Nozzle diameter:	1.2 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00068

Nozzle diameter:

0.4 mm

1 mm

1.2 mm

£21.50

£17.92 Excl. 20% VAT

14 day delivery

E3D thermistor cartridge

Zoom in

Description The E3D Thermistor Cartridge is an easy to attach thermistor cartridge for the E3D V6 heaterblocks. The cartridge contains the Semitec 104GT thermistor. The cartridge housing is made of copper and the thermistor is secured with a high quality thermally conductive ceramic adhesive.

The cartridge comes with a cable with connector.

For the Marlin firmware you need the following setting:
#TEMP_SENSOR_N 5

Specifications

Diameter:	3 mm	Brand:	E3D
Max temp:	280 °C	Hazard class:	n/a
Cable length:	100 cm	Our item no:	DED00069

Order now, we can ship this tomorrow!

£6.45

£5.38 Excl. 20% VAT

In stock

E3D Bowden adapter, 1.75mm

Zoom in

Description Easily make a Bowden connection to your extruder with this Bowden groovemount adapter. Suitable for 1.75mm filament. The coupling is suitable for PTFE pipe with an outer diameter of 4mm.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	E3D	Our item no:	DED00070

Order now, we can ship this tomorrow!

£7.50

£6.25 Excl. 20% VAT

In stock

E3D Bowden adapter, 3mm

Zoom in

Description Easily make a Bowden connection to your extruder with this Bowden groovemount adapter. Suitable for 2.85mm filament. The coupling is suitable for PTFE tube with an outer diameter of 6mm.

Specifications

Filament diameter:	2.85 mm	Hazard class:	n/a
Brand:	E3D	Our item no:	DED00071

£7.50

£6.25 Excl. 20% VAT

14 day delivery

E3D V6 silicone sock pro for hotends (3-pack)

Zoom in

Description With these silicone socks you can ensure a cleaner printer nozzle. The sock also ensures less heat radiation to the printed object, more favourable for overhangs, bridges and more accurate temperature behaviour.

The sock is suitable for the cartridge type heater block and fits nozzles from 0.25mm - 0.8mm. One sock lasts for at least 100 printing hours.

This pro version is extra tight around the nozzle.

Specifications

Colour:	Blue	Hazard class:	n/a
Brand:	E3D	Our item no:	DED00072

Order now, we can ship this tomorrow!

£4.80

£4.00 Excl. 20% VAT

In stock

E3D fibreglass sleeve, 9cm

Zoom in

Description This piece of fibreglass insulation sleeving is suitable for thin wire. The outer diameter of the sleeving is 1mm and the inner diameter is 0.25mm.

Specifications

Outer diameter:	1 mm	Inner diameter:	0.2 mm
Length:	9 cm	Hazard class:	n/a
Brand:	E3D	Our item no:	DED00073

£2.20

£1.83 Excl. 20% VAT

14 day delivery

E3D v6 hotend complete kit with 1.75mm thermistor cartridge

Zoom in

Description This complete v6 hotend kit for your RepRap 3D printer contains all parts for the v6 hotend (1.75mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached.

The kit contains the following original parts:

E3D thermistor cartridge 100k Ohm Semitec
E3D aluminium heater block
E3D heatbreak
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D aluminium heatsink
E3D silicone sock for v6 hotends ( 3 pack!)
Fasteners

The kit contains the following compatible parts:

Axial fan 30 x 30 x 10mm 12V
Ceramic Heating Cartridge 12V 40W
PTFE tube, 10cm

For the Marlin firmware you need the following thermistor setting:
#TEMP_SENSOR_N 5

Specifications

Max temp:	300 °C	Brand:	E3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DED00076

Order now, we can ship this tomorrow!

£76.50

£63.75 Excl. 20% VAT

In stock

E3D v6 brass nozzle, 1.75 x 0.50mm

Zoom in

Description This nozzle is suitable for an E3D hotend and with a medium opening of 0.50mm ensures smooth and precise printing of layers. This nozzle (marking # 6) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Material:	Brass	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	0.5 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00084

Nozzle diameter:

£5.75

£4.79 Excl. 20% VAT

14 day delivery

E3D Thermal Paste, 1 gram

Zoom in

Description Thermal paste improves the thermal transition from the warm to the cold part of the heatbreak. By using thermal paste, the risk of clogging (the softening of the filament in the heatbreak too early) is considerably reduced.

The composition of the paste is as follows: 50% silicone, 20% carbon, 30% metal oxide.

Specifications

Amount:	0.001 kg	Hazard class:	n/a
Brand:	E3D	Safety datasheet:	Safety Information
Weight:	0.003 kg	Our item no:	DED00085

Order now, we can ship this tomorrow!

£2.20

£1.83 Excl. 20% VAT

In stock

E3D v6 heater block and mounting materials (old version)

Zoom in

Description This v6 heater block is designed in such a way that it exhibits very good thermal behaviour. Both the heater cartridge and a thermistor can be fixed well and easily on the heater block.

The heater block is also compatible with the MK8 parts due to the internal M6 screw thread. The mounting parts are included.

Please note: this is the old version and cannot be used with the E3D thermistor cartridge.

Specifications

Dimensions:	20 x 16 x 11.5 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00088
Brand:	E3D

£12.75

£10.63 Excl. 20% VAT

14 day delivery

E3D v6 copper nozzle, 1.75mm x 0.25mm

Zoom in

Description This copper nozzle is suitable for an E3D hotend and ensures very precise results with a small opening of 0.25mm. The nozzle is made of a special copper alloy and only becomes softer above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #0) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Material:	Copper	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	0.25 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00090

Nozzle diameter:

Order now, we can ship this tomorrow!

£12.75

£10.63 Excl. 20% VAT

In stock

E3D V6 copper nozzle, 1.75mm x 0.35mm

Zoom in

Description This copper nozzle is suitable for an E3D hotend and ensures very precise results with a fairly small opening of 0.35mm. The nozzle is made of a special copper alloy and only softens above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #2) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Material:	Copper	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	0.35 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00092

Nozzle diameter:

£12.75

£10.63 Excl. 20% VAT

14 day delivery

E3D V6 copper nozzle, 1.75mm x 0.40mm

Zoom in

Description This copper nozzle is suitable for an E3D hotend and ensures very precise results with a medium opening of 0.40mm. The nozzle is made of a special copper alloy and only softens above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #3) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Material:	Copper	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00093

Nozzle diameter:

Order now, we can ship this tomorrow!

£12.75

£10.63 Excl. 20% VAT

In stock

E3D V6 copper nozzle, 1.75mm x 0.50mm

Zoom in

Description This copper nozzle is suitable for an E3D hotend and provides very precise results with a medium opening of 0.50mm. The nozzle is made of a special copper alloy and only softens above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #6) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Material:	Copper	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	0.5 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00094

Nozzle diameter:

Order now, we can ship this tomorrow!

£12.75

£10.63 Excl. 20% VAT

In stock

E3D V6 copper nozzle, 1.75mm x 0.60mm

Zoom in

Description This copper nozzle is suitable for an E3D hotend and provides very precise results with a fairly large opening of 0.60mm. The nozzle is made of a special copper alloy and only softens above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #4) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Material:	Copper	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	nickel plated
Nozzle diameter:	0.6 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DED00095