Revo nozzles

E3D Revo pink brass nozzle, 0.15mm for 1.75mm

Description This pink E3D Revo brass nozzle has a diameter of 0.15mm and works with 1.75mm filament from the E3D RapidChange Revo system. You can quickly and easily adjust your nozzle diameter at room temperature and change it without using additional tools.

The E3D Revo nozzle is equipped with its own heatbreak. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hotend.

Specifications

Diameter:	13 mm	Quantity:	1
Length:	41 mm	Colour:	Pink
Material:	Brass	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	0.15 mm	Hazard class:	n/a
Screwthread type:	-	Our item no:	DAR00856

Nozzle diameter:

Order now, we can ship this tomorrow!

£28.50

£23.75 Excl. 20% VAT

In stock

E3D Revo brass nozzle 1.75mm, 0.25mm

Zoom in

Description With this E3D brass nozzle with a diameter of 0.25mm (yellow) for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heatbreak. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hotend.

Specifications

Diameter:	13 mm	Quantity:	1
Length:	41 mm	Colour:	Yellow
Material:	Brass	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	0.25 mm	Hazard class:	n/a
Screwthread type:	-	Our item no:	DED00324

Nozzle diameter:

Order now, we can ship this tomorrow!

£21.50

£17.92 Excl. 20% VAT

In stock

E3D Revo brass nozzle 1.75mm, 0.40mm

Zoom in

Description With this red E3D brass nozzle with a diameter of 0.4mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change it without using additional tools.

The E3D Revo nozzle is equipped with its own heatbreak. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hotend.

Specifications

Diameter:	13 mm	Quantity:	1
Length:	41 mm	Colour:	Red
Material:	Brass	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Screwthread type:	-	Our item no:	DED00325

Nozzle diameter:

Order now, we can ship this tomorrow!

£21.50

£17.92 Excl. 20% VAT

In stock

E3D Revo brass nozzle 1.75mm, 0.60mm

Zoom in

Description With this blue E3D brass nozzle with a diameter of 0.6mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heatbreak. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hotend.

Specifications

Diameter:	13 mm	Quantity:	1
Length:	41 mm	Colour:	Blue
Material:	Brass	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	0.6 mm	Hazard class:	n/a
Screwthread type:	-	Our item no:	DED00326

Nozzle diameter:

Order now, we can ship this tomorrow!

£21.50

£17.92 Excl. 20% VAT

In stock

E3D Revo brass nozzle 1.75mm, 0.80mm

Zoom in

Description With this green E3D brass nozzle with a diameter of 0.8mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heatbreak. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hotend.

Specifications

Diameter:	13 mm	Quantity:	1
Length:	41 mm	Colour:	Green
Material:	Brass	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	none
Nozzle diameter:	0.8 mm	Hazard class:	n/a
Screwthread type:	-	Our item no:	DED00327

Nozzle diameter:

£21.50

£17.92 Excl. 20% VAT

14 day delivery

E3D Revo brass nozzle kit | 1.75mm | 0.40mm (3-pack)

Zoom in

Description This E3D brass nozzle set contains 3 Revo nozzles with a diameter of 0.4mm in red. They are suitable for 1.75mm filament and the E3D RapidChange Revo system. You can quickly and easily adjust your nozzle diameter at room temperature. You can easily change them without using extra tools.

The E3D Revo nozzle has its own heatbreak. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hotend.

Specifications

Diameter:	13 mm	Quantity:	3 Quantity
Length:	41 mm	Colour:	Red
Material:	Brass	Brand:	E3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DED00322

Order now, we can ship this tomorrow!

£58.50

£48.75 Excl. 20% VAT

In stock

E3D Revo brass nozzle kit | 1.75mm | 0.25/0.60/0.80mm (3-pack)

Zoom in

Description With this E3D Revo nozzle pack you'll receive 3 Revo nozzles, with the diameters 0.25mm (yellow), 0.6mm (blue) and 0.8mm (green).

These brass nozzles for 1.75mm filament are suitable for the E3D RapidChange Revo system. With this system you can quickly and easily adjust your nozzle diameter at room temperature. You can easily change them without using extra tools.

Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hotend.

Specifications

Diameter:	13 mm	Quantity:	3
Length:	41 mm	Brand:	E3D
Material:	Brass	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00323

Order now, we can ship this tomorrow!

£58.50

£48.75 Excl. 20% VAT

In stock

E3D Revo ObXidian nozzle 1.75mm x 0.25mm

Zoom in

Description Print fine details and complex shapes with the E3D Revo Obxidian nozzle. The replaceable nozzle has the new E3DLC coating. This minimizes the build-up of plastic around the nozzle. The integrated heat break prevents incorrect installation and a leaking hot end. The nozzle clearly indicates which size it concerns. This size nozzle also has an individual color, making it easy to recognize.

Specifications

Material:	ObXidian Steel	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	E3DLC™
Nozzle diameter:	0.25 mm	Hazard class:	n/a
Screwthread type:	-	Our item no:	DAR00935
Colour:	Yellow

Nozzle diameter:

£69.50

£57.92 Excl. 20% VAT

14 day delivery

E3D Revo Obxidian nozzle 1.75mm x 0.40mm

Zoom in

Specifications

Material:	ObXidian Steel	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	E3DLC™
Nozzle diameter:	0.4 mm	Hazard class:	n/a
Screwthread type:	-	Our item no:	DAR00912
Colour:	Red

Nozzle diameter:

Order now, we can ship this tomorrow!

£69.50

£57.92 Excl. 20% VAT

In stock

E3D Revo Obxidian nozzle 1.75mm x 0.60mm

Zoom in

Specifications

Material:	ObXidian Steel	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	E3DLC™
Nozzle diameter:	0.6 mm	Hazard class:	n/a
Screwthread type:	-	Our item no:	DAR00913
Colour:	Blue

Nozzle diameter:

Order now, we can ship this tomorrow!

£69.50

£57.92 Excl. 20% VAT

In stock

E3D Revo ObXidian nozzle 1.75mm x 0.80mm

Zoom in

Specifications

Material:	ObXidian Steel	Brand:	E3D
Filament diameter:	1.75 mm	Nozzle coating:	E3DLC™
Nozzle diameter:	0.8 mm	Hazard class:	n/a
Screwthread type:	-	Our item no:	DAR00936
Colour:	Green

Nozzle diameter:

£69.50

£57.92 Excl. 20% VAT

14 day delivery

E3D Revo silicone sock kit (10-pack, 2 per size)

Zoom in

Description Keep your E3D Revo hotend insulated with these silicone socks. By using the sock you can keep the heater block clean and free of melted pieces of plastic.

It also reduces heat loss and improves print quality, especially when using a cooling fan.

Specifications

Material:	Silicone	Hazard class:	n/a
Quantity:	10	Our item no:	DED00328
Brand:	E3D

Order now, we can ship this tomorrow!

£5.75

£4.79 Excl. 20% VAT

In stock

E3D Revo Belt nozzle 1.75mm x 0.40mm

Zoom in

Description The E3D Revo Belt nozzle 1.75mm x 0.40 mm is specially designed to improve your belt printing experience. The nozzle is longer to allow printing at a 45 degree angle. Experiment freely with other Revo Belt nozzles, which can be changed by hand in just 60 seconds. These come in 3 different sizes so you always have one that fits your project perfectly. With these nozzles you can print small objects with high resolution or large prints in a short time. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion. The Revo belt nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Please note: Revo nozzles are not suitable for use with V6 heater blocks. You may also need to adjust your z-offset when you change nozzles.

Specifications

Dimensions:	46.5 mm	Colour:	Red
Max temp:	300 °C	Brand:	E3D
Material:	Brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR01168
Screwthread type:	-

£34.50

£28.75 Excl. 20% VAT

14 day delivery

E3D Revo High Flow nozzle 1.75mm x 0.40mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 0.40 mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Dimensions:	41.1 mm	Colour:	Red
Max temp:	300 °C	Brand:	E3D
Material:	Brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR01171
Screwthread type:	-

Nozzle diameter:

Order now, we can ship this tomorrow!

£47.50

£39.58 Excl. 20% VAT

In stock

E3D Revo High Flow nozzle 1.75mm x 0.60mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 0.60 mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Dimensions:	41.1 mm	Colour:	Blue
Max temp:	300 °C	Brand:	E3D
Material:	Brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.6 mm	Our item no:	DAR01172
Screwthread type:	-

Nozzle diameter:

Order now, we can ship this tomorrow!

£41.50

£34.58 Excl. 20% VAT

In stock

E3D Revo High Flow nozzle 1.75mm x 0.80mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 0.80 mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Dimensions:	41.1 mm	Colour:	Green
Max temp:	300 °C	Brand:	E3D
Material:	Brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DAR01173
Screwthread type:	-

Nozzle diameter:

£47.50 (sold out)

£39.58 Excl. 20% VAT

E3D Revo High Flow nozzle 1.75mm x 1.00mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 1.00 mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Dimensions:	41.1 mm	Colour:	Black
Max temp:	300 °C	Brand:	E3D
Material:	Brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	1 mm	Our item no:	DAR01174
Screwthread type:	-

Nozzle diameter:

£47.50 (sold out)

£39.58 Excl. 20% VAT

E3D Revo High Flow nozzle 1.75mm x 1.20mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 1.20 mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Dimensions:	41.1 mm	Colour:	Purple
Max temp:	300 °C	Brand:	E3D
Material:	Brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	1.2 mm	Our item no:	DAR01175
Screwthread type:	-

Nozzle diameter:

£47.50

£39.58 Excl. 20% VAT

14 day delivery

E3D Revo High Flow nozzle 1.75mm x 1.40mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 1.40 mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Dimensions:	41.1 mm	Colour:	Orange
Max temp:	300 °C	Brand:	E3D
Material:	Brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	1.4 mm	Our item no:	DAR01176
Screwthread type:	-

Nozzle diameter:

£47.50

£39.58 Excl. 20% VAT

14 day delivery

E3D Revo High Flow ObXidian nozzle 1.75mm x 0.40mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognized by the colored silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.4 mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300 ˚ C.

Specifications

Max temp:	300 °C	Voltage:	24 v
Material:	Copper & Hardened Steel with E3DLC coating	Brand:	E3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR01768

Nozzle diameter:

£69.00

£57.50 Excl. 20% VAT

14 day delivery

E3D Revo High Flow ObXidian nozzle 1.75mm x 0.60mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognizable by the colored silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.6 mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300 ˚ C.

Specifications

Max temp:	300 °C	Voltage:	24 v
Material:	Copper & Hardened Steel with E3DLC coating	Brand:	E3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.6 mm	Our item no:	DAR01769

Nozzle diameter:

£69.00 (sold out)

£57.50 Excl. 20% VAT

E3D Revo High Flow ObXidian nozzle 1.75mm x 0.80mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognizable by the colored silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.8 mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300 ˚ C.

Specifications

Max temp:	300 °C	Voltage:	24 v
Material:	Copper & Hardened Steel with E3DLC coating	Brand:	E3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DAR01770

Nozzle diameter:

£69.00

£57.50 Excl. 20% VAT

14 day delivery

E3D Revo High Flow ObXidian nozzle 1.75mm x 1.0mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognizable by the colored silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 1.0 mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300 ˚ C.

Specifications

Max temp:	300 °C	Voltage:	24 v
Material:	Copper & Hardened Steel with E3DLC coating	Brand:	E3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	1 mm	Our item no:	DAR01771

Nozzle diameter:

£69.00

£57.50 Excl. 20% VAT

14 day delivery

E3D Revo High Flow ObXidian nozzle 1.75mm x 1.20mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognizable by the colored silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 1.2 mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300 ˚ C.

Specifications

Max temp:	300 °C	Voltage:	24 v
Material:	Copper & Hardened Steel with E3DLC coating	Brand:	E3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	1.2 mm	Our item no:	DAR01772

Nozzle diameter:

£69.00 (sold out)

£57.50 Excl. 20% VAT

E3D Revo High Flow ObXidian nozzle 1.75mm x 1.40mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognizable by the colored silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 1.4 mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300 ˚ C.

Specifications

Max temp:	300 °C	Voltage:	24 v
Material:	Copper & Hardened Steel with E3DLC coating	Brand:	E3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	1.4 mm	Our item no:	DAR01773