Auto bed levelling 3D printer parts M12 LJ12A3-4-Z/BX Inductive distance sensor, 4mm 123-3d.co.uk

Antclabs BLTouch Auto Bed Levelling Sensor v3.1

Description The BLTouch is a sensor for automatic bed levelling. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.

The BLTouch sensor works with almost any 3D printer and is suitable for various print bed surfaces such as metal, glass, wood and tape.

Specifications

Cable length:	15 cm	Manual:	Download
Brand:	ANTCLABS	Hazard class:	n/a
Voltage VDC:	5 v/°c	Our item no:	DAR00016
Weight:	0.01 kg

Order now, we can ship this on Monday!

£29.60

£24.67 Excl. 20% VAT

In stock

Creality 3D CR Touch Auto levelling kit

Zoom in

Description The Creality 3D CR Touch Auto levelling kit is a solution for automatically leveling your 3D printer. It performs multi-point detection on the bed and records the height of each detection point.

The CR Touch has a metal probe that reduces wear and significantly extends its life. It works with PEI, glass, metal, magnetic circuit boards, carborundum glass and other 3D printing platform materials.

It is easy to install and use. You just need to download firmware from Creality official website and copy it to TF/SD card. Insert the card directly into the card slot on the 3D printer. The program can be updated after power on.

The CR Touch only works on 3D printers with a 32-bit motherboard.

Specifications

Dimensions:	27 x 17.5 x 39.3 mm	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR01045
Weight:	0.05 kg

Order now, we can ship this on Monday!

£37.00

£30.83 Excl. 20% VAT

In stock

Antclabs BLTouch auto bed levelling sensor spare push pin

Zoom in

Description A spare push pin for the BLTouch Auto Bed Leveling Sensor.

Specifications

Material:	Plastic	Hazard class:	n/a
Brand:	ANTCLABS	Our item no:	DAR00017

Order now, we can ship this on Monday!

£5.85

£4.88 Excl. 20% VAT

In stock

Antclabs BLTouch Auto Bed Levelling Sensor cable kit SM-XD, 1m

Zoom in

Description With the Antclabs BLTouch cable of 1 metre, you can bridge a longer distance for mounting the BLTouch Auto Bed Levelling Sensor.

Specifications

Length:	1 m	Hazard class:	n/a
Brand:	ANTCLABS	Our item no:	DAR00018

Length:

1 m

1.5 m

Order now, we can ship this on Monday!

£3.90

£3.25 Excl. 20% VAT

In stock

Antclabs BLTouch Auto Bed Levelling Sensor cable kit SM-XD, 1.5m

Zoom in

Description With the 1.5 metre Antclabs BLTouch cable, you can bridge a longer distance for mounting the BLTouch Auto Bed Levelling Sensor.

Specifications

Length:	1.5 m	Hazard class:	n/a
Brand:	ANTCLABS	Our item no:	DAR00019

Length:

1 m

1.5 m

£4.85

£4.04 Excl. 20% VAT

14 day delivery

Bigtreetech Eddy Duo (USB or CAN)

Zoom in

7
6
5
4
3
2
1
0

Description

The BIGTREETECH Eddy Duo is an advanced, non-contact auto-bed leveling sensor designed to improve the precision and efficiency of your 3D printer. Thanks to advanced eddy current technology, the Eddy Duo detects microscopic irregularities on the print bed, allowing for fast and accurate height adjustments and optimal first layer adhesion.

Key Features:

Fast and accurate leveling: Levels the print bed in just 20 seconds with 0.5 µm precision, resulting in a uniform first layer and improved print results.
Versatile connectivity: Supports both USB and CAN bus communications, allowing it to be flexibly integrated into various printer configurations.
Lightweight Design: Weighing only 6 grams, it minimizes the load on the extruder and maintains the printer's movement speed and accuracy.
Temperature Compensation: Integrates with Klipper's temperature compensation function to keep leveling accurate and prevent temperature drift.
Easy Installation: Designed for easy mounting on standard Voron X carriages and compatible with various 3D printer models.

The Eddy Duo is specifically designed for Klipper-based 3D printers, offering seamless integration for users seeking superior print quality and ease of use.

Specifications

Cable length:	250 cm	Weight:	0.006 kg
Voltage:	5 v	Hazard class:	n/a
Brand:	BIQU	Our item no:	DAR01929

£29.50 (sold out)

£24.58 Excl. 20% VAT

Bigtreetech Eddy Coil

Zoom in

2
1
0

Description The Eddy Coil from Bigtreetech is a non-contact, high-speed leveling tool designed for Klipper. With its lightweight 6g design, the Eddy Coil can level within 20 seconds with 0.5µm precision. It uses millisecond-level eddy current to detect minute irregularities on the print bed, adjust the height accordingly, and level the bed. The advanced temperature compensation ensures consistent and precise leveling regardless of temperature differences. The Eddy Coil can be easily installed on the TL-Q5MC/PL-08N location within minutes. It works with EBB36/42 CAN and is ideal for DIY users. This leveling tool is suitable for H2 series extruders and Ender-3.

The box contains:

Eddy Coil
150mm 4pin Dupont female connection cable
M3x18 mounting screws 2x
M3x25 mounting screws 2x
Tie wraps 5x - Stickers 3x
BTT duck

Specifications

Cable length:	15 cm	Weight:	0.006 kg
Voltage:	5 v	Hazard class:	n/a
Brand:	BIQU	Our item no:	DAR01709

£16.23

£13.53 Excl. 20% VAT

14 day delivery

Duet3D IR probe

Zoom in

Description This Duet3D IR probe detects the height of the print bed with infrared light. How exactly does this work? The reflection from the print bed surface is captured by the IR sensor so that the height can be determined without contact.

The sensor is supplied with a loose connector and two mounting screws.

NOTE: The sensor does not work with all surfaces. Avoid shiny surfaces!

Please note we do not offer support on the installation of this product.

Specifications

Dimensions:	24 x 18 mm	Hazard class:	n/a
Operating volt logic:	3.5 - 25V	Our item no:	DUE00009
Brand:	Duet3D

£29.95

£24.96 Excl. 20% VAT

14 day delivery

M12 LJ12A3-4-Z/BX Inductive distance sensor, 4mm

Zoom in

Description Easily add an automatic bed levelling system to your 3D printer with this inductive distance sensor. The sensor triggers on metal objects and has a theoretical measuring distance of 4mm. The diameter of the sensor is 12mm.

The sensor operates on 6V-36V DC, is an NPN variant/NO and has an internal pull-up resistor which makes it necessary to add a series resistor to the signal connection.

Wire colours:
Brown: +V (12V)
Black: Output (to series resistor 10k)
Blue: 0V (gnd)

Specifications

Diameter:	12 mm	Brand:	123-3D
Input voltage:	6-36V	Hazard class:	n/a
Screwthread type:	M12	Our item no:	DEL00006
Max current:	0.3 A

Order now, we can ship this on Monday!

£7.25

£6.04 Excl. 20% VAT

In stock

M18 LJ18A3-8-Z/BY Inductive distance sensor, 8mm

Zoom in

Description Easily add an automatic bed levelling system to your 3D printer with this inductive distance sensor. The sensor triggers on metal objects and has a theoretical measuring distance of 8mm. The diameter of the sensor is 18mm.

The sensor operates on 6V-36V DC, is a PNP variant/NO and has an internal pull-up resistor which makes it necessary to add a series resistor to the signal connection.

Wire colours:
Brown: +V (12V)
Black: Output (to voltage divider)
Blue: 0V (gnd)

Data sheet (PDF)

Specifications

Diameter:	18 mm	Brand:	123-3D
Input voltage:	6-36V	Hazard class:	n/a
Max current:	0.3 A	Our item no:	DEL00004

£7.25

£6.04 Excl. 20% VAT

14 day delivery

Creality 3D CR Touch Auto leveling kit (without bracket)

Zoom in

Description The Creality 3D CR Touch Auto leveling kit without bracket. Is the ideal solution if you want to replace your current CR-Touch sensor or if you want to mount this leveling sensor on a bracket of your own design.

The CR Touch has a metal probe that reduces wear and significantly extends its lifespan. It works with PEI, glass, metal, magnetic circuit boards, carborundum glass and other 3D printing platform materials by performing a multi-point detection on the printing surface to record the height differences.

It is easy to install and use. You just need to download firmware from Creality official website and copy it to TF/SD card. Insert the card directly into the card slot on the 3D printer. The program can be updated after switching on.

The CR Touch only works on 3D printers with a 32-bit motherboard such as the Ender-3 Neo, Ender-3 v2, Ender-3 Max, Ender-3 S1, Ender-3 S1 Plus, Ender-3 S1 Pro, CR -10 Smart Pro.

Specifications

Dimensions:	27 x 17.5 x 39.3 mm	Hazard class:	n/a
Brand:	Creality 3D	Our item no:	DAR00941
Weight:	0.05 kg

£35.00 (sold out)

£29.17 Excl. 20% VAT

E3D PZ Probe

Zoom in

1
0

Description Make it easy for yourself with this PZ Probe, a compact bed leveling system that comes with a PZ board. This way you can easily integrate this system into your setup. This kit gives you the choice of 2 different communication options (I2C or UART), which activate the system when the piezoelectric element is compressed or expanded. You can adjust the PZ board in 5 different ways to the communication method that suits you best. Many settings can also be adjusted and saved as presets.

Please note: do not exceed 5 volts.

This kit contains:

1 x PZ washer
2 x M2 Board Mounting Screws
1 x PZ Probe Board
1 x Extension cables

Specifications

Input voltage:	3.3V-5V	Hazard class:	n/a
Brand:	E3D	Our item no:	DAR01868

£46.50

£38.75 Excl. 20% VAT

14 day delivery

CNC Voron Tap V2.0 Black

Zoom in

Description

Multi Axis CNC machined. Lighter (59.8g) and smaller (45mm*13mm*68mm).
Full Al6061 T6 aluminium construction. Enhanced wear & high-temperature resistance.
Unmatched stability and reliability.
Designed for VORON V2.4 R1&R2 and VORON Trident

NOTE: The CNC Tap is shipped with a special oil that prevents corrosion. We recommend cleaning this oil and applying your choice of lubricant after you receive it. No disassembly is required to do this. Follow the instructions in the build guide.

CNC Voron Tap:

Ultra-high precision: 0.4μm (0.0004mm)
Material: All Al6061 T6 aluminium structure. Enhance wear resistance and high-temperature resistance
Size: 45mm*13mm*68mm
Ultra Light body: 59.8g
5-24V supported
Designed for VORON V2.4 R1&R2 and VORON Trident

Features

The effective travel of the printer will not be affected (the printed version will reduce the Y travel by 3mm or the nozzle will hit the door)
Omron D2FP-FN new optical microswitch. Lower noise, faster trigger, higher sensitivity and accuracy, and long service life.
Life span: 70,000,000+ probing
Easy installation: No need to assemble and disassemble TAP itself! (Do not disassemble by yourself, otherwise, the product may be damaged!)
Suitable for: VORON V2.4 R1&R2 and VORON Trident printers
Not suitable for: Switchwire, V1.8, Legacy, VORON V0.x

Specifications