Elegoo Neptune 4 Pro

Key Features:

• Quiet Klipper motherboard
• ARM 64-bit 1.5G main frequency quad-core processor
• Quick print speeds (up to 500mm/s)
• Dual-gear direct drive extruder
• High-temperature nozzle (up to 300°C)
• Works with PLA, PETG, ABS, TPU and nylon filament
• Extended hotend design
• Precise temperature control
• Auto bed levelling

Introducing the fast and efficient Elegoo Neptune 4 Pro 3D printer.

Quiet Yet Powerful Printing, Fast

Featuring a quiet Klipper motherboard, with this 3D printer from Elegoo, you can print free from distractions caused by noise. This Klipper motherboard, when combined with the ARM 64-bit 1.5G main frequency quad-core processor, ensures that the Neptune 4 Pro has sufficient processing power. This in turn allows the powerful Elegoo machine to print at amazingly quick speeds of up to 500mm/s, with recommended print speeds of 250mm/s, for optimum performance.

Smoother Printing

More than capable of producing accurate and smooth models, the Neptune 4 Pro supports advanced functions like input shaping and pressure advance. The dual-gear direct drive extruder, with a 5.2:1 reduction ratio, ensures smooth and consistent extrusion. When combined with the copper-titanium bi-metal throat pipe and unique air duct design, these features improve heat dissipation and reduce nozzle clogging, in order to guarantee the success of prints.

Flexible Filament Support

With a high-temperature nozzle reaching 300°C, the printer can handle a wide range of filaments for greater flexibility, all available today at 123-3D.co.uk. The Neptune 4 Pro supports PLA, PETG, and TPU, as well as high-temperature filaments like nylon.

Precise Temperature Control and Efficient Heating

Experience faster print speeds thanks to the extended hotend design which ensures consistent heating and faster melting and extrusion. With an impressive power output of 100W+150W, the slicing software automatically recognises the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the centre heating zone (120mm x 120mm). This useful feature means that models are printed to a consistently high standard. The two partitions can also be turned on and off manually for more precise temperature control. These features allow you to have more control over the printing process.

The Elegoo Neptune 4 Pro also features 2 x thickened double-sided 4015 ball bearing cooling fans and 4 x 4020 ball bearing blower fans behind the print head for omnidirectional rapid cooling of the newly printed layers. This then prevents the newly printed layers from becoming warped, improving the overall print quality, even at fast printing speeds.

Easy to Use

The surface of the PEI magnetic platform is marked for guidance, making 3D printing a simple and user-friendly process. With 121 (11 x 11) points auto bed levelling, you can achieve consistent and reliable prints every time without the need for manual bed levelling. This simplistic set-up process means that it takes less time to get you printing! Additionally, the auxiliary levelling by hand-twist knobs allows for further fine-tuning of the print bed's level, for improved print quality and maintained control of your prints.

Experience fast and powerful printing with the Elegoo Neptune 4 Pro!

Introducing the Neptune 4 Max FDM printer from Elegoo.

Featuring a large build volume, supporting a wider range of creative projects, the Elegoo Neptune 4 Max 3D printer also features fast print speeds for greater efficiency. The maximum print speed of this printer is 500mm/s, meaning that you can finish projects quickly. A print volume of 420 x 420 x 480mm³ is also supported, for even greater possibilities when printing.

A maximum extruder temperature of 300°C facilitates the Elegoo Neptune 4 Max’s support of the following filaments: nylon, PETG, PLA, and TPU.

Print cooling is an efficient process thanks to the multiple fans and finally the Neptune 4 Max features an 11 x 11 (121) points automatic bed levelling system, for a faster setup.

Available to order from us at 123-3D.co.uk!

• Multicolor printing with automatic filament change (CANVAS system)
• Up to 500mm/s print speed & automatic calibration
• High temperature hotend up to 350 °C

The Elegoo Saturn 2 is an 8K SLA 3D printer with a large build volume. The printer has a resolution of 7680 x 4320 and a pixel size of 28 micrometers. Thanks to a newly developed light source & mirror, the Saturn 2 is able to print with great precision.

For better Z-axis stability, the printer is equipped with double linear sliders over which the buildplate moves by means of a lead screw. The film is tempered which increases the life of the screen and there is a material release detection system.

The Elegoo Neptune 4 Plus FDM printer is the impressive new printer from Elegoo which prioritises speed, build volume and high temperatures for greater flexibility in terms of supported filaments.

With a super fast maximum print speed of 500mm/s, as well as a large print volume of 320 x 320 x 385mm³, you’re able to print complex and detailed projects quickly.

Thanks to the printer’s maximum extruder temperature of 300°C, the Elegoo Neptune 4 Plus is able to work with a wide range of filaments, (PETG, PLA, TPU, nylon), for greater versatility. Whichever of these filaments you choose, you can be assured that it’s extruded evenly, as it features a dual-gear direct extruder.

Despite its high temperatures for wider filament choice, the Neptune 4 Plus can cool down quickly to prevent printing errors. This is due to the fans that are included with this Neptune printer:

• 2 x 4015 ball bearing model cooling fans
• 3010 ball bearing blower fan
• 2 x 6025 ball bearing blower fans

Lastly, the Elegoo Neptune 4 Plus also features 11 x 11 (121) points automatic bed levelling for faster and easier setup, meaning that you can begin printing quickly.

Experience the future of 3D printing with the Elegoo Neptune 4 Plus, available to order from 123-3D.co.uk!