1.75mm Nylon filament

1 - 11 of 11

123-3D Filament PA12 CF15 Black 1.75mm 1kg

Description 123-3D Own Brand Filament PA12 CF15 1.75 mm is a lightweight, durable nylon filament with 15% added carbon particles. It is known for its exceptional strength, stiffness, and excellent thermal resistance. It also has an improved layer adhesion and low shrinkage.

Key Features:

15% added carbon particles
10% lighter than PA CF15
Thermal resistance up to 170 ˚ C
Minimal shrinkage

Applications: Ideal for making structural parts in the aerospace industry, lightweight and durable drone parts, advanced prototypes and functional models.

Please note: Due to the added carbon fibres it is recommended to use a hardened steel nozzle or ruby nozzle of 0.6mm or larger.

Specifications

Material:	PA12 CF15	Roundness:	>95%
Filament diameter:	1.75 mm	Density:	1.27
Heated bed temp:	80 - 130 °C	Outer diameter:	Ø 20.0 cm
Colour:	Black	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	255 - 295 °C	Spool width:	6.8 cm
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	1 kg	Our item no:	DHM00237
Brand:	123-3D

Order now, we can ship this tomorrow!

£76.15

£63.46 Excl. 20% VAT

In stock

123-3D Filament PA6 CF15 Black 1.75mm 1kg

Zoom in

Description 123-3D Own Brand Filament PA6 CF15 1.75 mm is PA6 filament with 15% added carbon particles, which increases the mechanical strength. Moisture absorption is reduced by 50% and water is absorbed 4 times less quickly than with normal PA6.

Key Features:

Up to 180 ˚ C for max. 200 hours, up to 150 ˚ C for max. 20,000 hours
Wear-resistant and high mechanical strength
Good layer adhesion
Prints have high hardness and stiffness

Applications: Ideal for making functional prototypes, tools, gears and ring and plate seals that require increased resistance to chemicals and corrosion.

Please note: Due to the added carbon fibers it is recommended to use a hardened steel nozzle or ruby nozzle of 0.6mm or larger.

Specifications

Material:	PA6 CF15	Roundness:	>95%
Filament diameter:	1.75 mm	Density:	1.25
Heated bed temp:	50 - 80 °C	Outer diameter:	Ø 20.0 cm
Colour:	Black	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	260 - 295 °C	Spool width:	6.8 cm
Max deviation:	± 0.05 mm	Hazard class:	n/a
Amount:	1 kg	Our item no:	DHM00238
Brand:	123-3D

Order now, we can ship this tomorrow!

£59.50

£49.58 Excl. 20% VAT

In stock

123-3D Adhesive Spray (150 ml)

Zoom in

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Volume:	150 ml	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR02393
Download SDS:	Download

Order now, we can ship this tomorrow!

£6.50

£5.42 Excl. 20% VAT

In stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Material:	Steel	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR00620

Order now, we can ship this tomorrow!

£8.25

£6.88 Excl. 20% VAT

In stock

BIQU Panda Storage Rack for 3D Print Filament

Zoom in

Description The BIQU Panda Feed Rack is a robust and space-saving storage system for your 3D printer filaments. Thanks to its stackable design and narrow depth, this rack accommodates up to 40+ spools without taking up unnecessary space on your workspace. Ideal for home use or in a professional workshop.

Specifications

Dimensions:	635 x 330 x 1,320 mm	Brand:	BIQU
Quantity:	1	Hazard class:	n/a
Colour:	Black	Our item no:	DAR02687

£50.50

£42.08 Excl. 20% VAT

14 day delivery

eSun eVacuum kit Pro 3

Zoom in

Description Keep your filament dry and dust free with the eSun eVacuum kit Pro 3. This kit allows you to vacuum seal your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-colored closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Dimensions:	32 x 32 x 102 mm	Weight:	0.075 kg
Voltage:	5 v	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01277

Order now, we can ship this tomorrow!

£20.39

£16.99 Excl. 20% VAT

In stock

Modifi3D Pro 2 repair/modification tool

Zoom in

Description The Modifi3D Pro 2 is the ultimate post-processing tool for your 3D printed objects. With this advanced tool, you can easily create repairs, modifications, and superfine finishes, faster, more precisely, and more comfortably than ever.

Thanks to its increased power, the Modifi3D PRO2 reaches temperatures of up to 480ºC (896ºF), making it suitable for a wide range of applications and tips. The tool heats up to 200ºC (392ºF) in less than 10 seconds.

The Pro 2 comes with 12 high-quality, specially coated tips that are easily interchangeable. This coating prevents plastic from sticking and ensures a long lifespan and precise results.

Knife tip: for cutting away support material
Large blade tip: for cutting away support material
Needle tip: for clearing small holes
Standard point: for general use
Spoon point: for removing threads and leveling surfaces
Large spoon tip: for removing threads and leveling surfaces
Detail point: for updating detail work
Smoothing point: for leveling surfaces
Countersinking point: for making countersink holes
Insertion point: for inserting metal parts
Pressure point: for pressing down or leveling surfaces.
Chisel point: for cutting off or shaping edges and corners straight.

All tips are fully compatible with the previous Modifi3D Pro version, allowing existing accessories to be used as usual.

Specifications

Power rating:	60 W	Brand:	Modifi3D
Max operating temp:	480 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR02554
Cable length:	150 cm

Order now, we can ship this tomorrow!

£60.00

£50.00 Excl. 20% VAT

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	30 W	Brand:	Modifi3D
Max operating temp:	450 °C	Weight:	0.12 kg
Voltage:	24 v	Hazard class:	n/a
Cable length:	150 cm	Our item no:	DGS00090

Order now, we can ship this tomorrow!

£65.50

£54.58 Excl. 20% VAT

In stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007
Brand:	Modifi3D

Extra information

Instructional video

Order now, we can ship this tomorrow!

£29.95

£24.96 Excl. 20% VAT

In stock

SUNLU Filament Connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different color. This way you can create personalized 3D prints with unique colorful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Sunlu	Our item no:	DAR01819
Manual:	Download

Order now, we can ship this tomorrow!

£39.95

£33.29 Excl. 20% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications