{"product_id":"duet3d-duet-3-magnetic-encoder","title":"Duet3D | Duet 3 Magnetic Encoder","description":"The Duet3D Magnetic Encoder is compatible with the Duet 3 Expansion 1HCL. This allows you to accurately measure the position and rotation of the motor, because it uses a hall effect sensor. This detects the rotation of a magnet attached to the back of the motor. The encoder comes with a 150mm ribbon cable and nylon washers to properly mount it to the back of most NEMA 17 motors.\u003cbr\u003e\u003cbr\u003e \u003cem\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e You will need replacement (longer) motor screws to attach the Duet 3 magnetic encoder to most NEMA 17 motors. These are not included because the length of the screws depends on the length of your engine.\u003c\/em\u003e\u003cul\u003e\n\u003cli\u003e 14 bit on-axis magnetic rotation sensor\u003c\/li\u003e\n\u003cli\u003e The sensor supports a maximum of 14500 RPM\u003c\/li\u003e\n\u003cli\u003e Magnet of 4 mm thick with a diameter of 6 mm\u003c\/li\u003e\n\u003cli\u003e SPI output so that the Duet 3 magnetic encoder can communicate with a Duet 3 Expansion 1HCL controller\u003c\/li\u003e\n\u003cli\u003e 3.3 V – compatible with the Duet 3 Expansion 1HCL controller (can be expanded to 5V for other devices)\u003c\/li\u003e\n\u003cli\u003e Compatible with all NEMA17 motors. Motors with a free shaft that sits no more than 3.5mm below the rear of the motor should also be compatible. If the free shaft extends out the back, you will need a mounting system that holds the sensor approximately 1mm from the magnet on the shaft.\u003c\/li\u003e\n\u003cli\u003e For use with a NEMA23 and other sizes: Use an adapter plate or mounting system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Duet3D","offers":[{"title":"Default Title","offer_id":58386682446088,"sku":"DUE00051","price":47.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DUE00051_01.jpg?v=1786078372","url":"https:\/\/www.123-3d.co.uk\/products\/duet3d-duet-3-magnetic-encoder","provider":"123-3D","version":"1.0","type":"link"}