{"title":"BigTreeTech","description":null,"products":[{"product_id":"bigtreetech-octopus-pro-v1-1-h723","title":"BigTreeTech Octopus Pro v1.1 (H723)","description":"With the BigTreeTech Octopus Pro v1.1 (H723) you choose a very stable and safe 3D printer motherboard. It supports Raspberry Pi and Octoprint operating systems and Klipper, Marlin and RRF firmware. The firmware can be updated via DFU mode, where the firmware does not require a bootloader, but is sent directly to the board from the PC. The Octopus Pro has several versions of MCUs, so you can choose the one that suits your needs. It is equipped with a 32-bit ARM-level Cortex-M4 series STM32H723ZET6\/ STM32F407ZET6 \/ STM32F429ZGT6 \/ STM32F446ZET6 chip. The frequency goes up to 168 MHz and the flash is 1 MB.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eOther functionalities\u003c\/strong\u003e \u003cul\u003e \t\u003cli\u003e8 powerful motor drives for a more stable unit\u003c\/li\u003e \t\u003cli\u003e8 isolation chips that protect the motherboard and a motherboard protective level conversion chip that converts a 3.3 V signal into a 5 V signal\u003c\/li\u003e \t\u003cli\u003eSTEP\/DIR mode, UART mode and an SPI mode\u003c\/li\u003e \t\u003cli\u003eConnect 6 CNC fans and 2 normal fans\u003c\/li\u003e \t\u003cli\u003eCompatible with NTC100K \u0026amp; PT100\/PT1000 high temperature\u003c\/li\u003e \t\u003cli\u003eSupports up to 60 V - Supports proximity sensors, jumper optional pull-up resistor and BL touch\u003c\/li\u003e \t\u003cli\u003eUSB Type-C connection\u003c\/li\u003e \u003c\/ul\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386684150024,"sku":"DAR01182","price":97.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01182_01.png?v=1786078415"},{"product_id":"bigtreetech-sfs-v2-0-smart-filament-detection-sensor","title":"BigTreeTech SFS v2.0 smart filament detection sensor","description":"This smart filament detection sensor helps you prevent problems with your filament. When a problem is detected, an error will appear on the screen and printing will be automatically paused. It can detect 4 problems: clogged nozzle, filament tangled, running out of filament and extruder problems. This is done by means of a very precise photoelectric sensor.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eReal-time status indication\u003c\/strong\u003e\u003cbr\u003e A light indicates the status of your filament. With blue flashing light, printing proceeds normally, with red light the filament is empty or broken. If there is a continuous blue light or no light, it could be one of the other problems that this sensor can detect. To find out exactly what the problem is, you can check your filament and extruder.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eEasily install on your printer\u003c\/strong\u003e\u003cbr\u003e The bi-directional supply system ensures that you will have no problems with installation. The sensor is 53.1 x 30.3 x 27.3 mm and has 3 mounting holes for easy attachment to your printer.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eOther functionalities\u003c\/strong\u003e\u003cbr\u003e The smart filament detection sensor is equipped with a filament feed lever, making it easy to load filament. It also has firmware support for RRF, Klipper and Marlin and works with both a direct drive extruder and a bowden extruder.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386693030152,"sku":"DAR01239","price":15.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01239_01.jpg?v=1786078579"},{"product_id":"bigtreetech-tmc2209-step-driver-1-256-step-interpolation-v1-3-uart","title":"BigTreeTech TMC2209 Step Driver | 1\/256 step interpolation v1.3 | UART","description":"The BigTreeTech TMC2209 Step Driver makes skipping steps and jittering a thing of the past. The driver is super quiet and has good heat dissipation. You can choose from 2 modes: STEP\/DIR mode and UART mode. In the STEP\/DIR mode there are options for 16, 8, 4 or 2 microsteps. For UART mode, you can use both 4th and 5th pin as UART pin. The potentiometer can be adjusted to better suit your project. Turning this meter clockwise reduces the current supplied to the driver. Turning counterclockwise increases the driver's power supply. Be sure to properly mount the driver before using it for heat dissipation. This prevents the driver from working properly.\u003cbr\u003e\u003cbr\u003e \u003cem\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e place the driver in the correct orientation on the motherboard. If the driver is placed incorrectly, it may burn out.\u003c\/em\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386712330504,"sku":"DAR01449","price":7.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01449_01.png?v=1786078919"},{"product_id":"bigtreetech-panda-touch-v1-0","title":"BigTreeTech Panda Touch V1.0","description":"The Panda Touch V1.0 is a 5 inch touchscreen from Bigtreetech that can be used as an alternative or replacement for the current screen of the Bambu P1P and the Bambu P1S. It is even possible to control up to 10 Bambu Lab printers with the Panda Touch V1.0. This screen is compatible with the Bambu Lab X1, P1 and A1 series.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eEasy installation \u0026amp; use\u003c\/strong\u003e\u003cbr\u003e The Panda Touch is easy and hassle-free to install, so you can get started right away. The user-friendly UI and useful features make this an ideal screen. Connects easily to 2.4G WiFi and charges effortlessly thanks to the built-in battery that allows you to charge magnetically. The Panda Touch comes with a magnetic USB dock, specially made for the P1 series 3D printers from Bambu Lab. With just one click you can access and control your AMS. This allows you to easily see the colors and filament types now loaded into your AMS. It is also possible to set the type or color manually, just like on the X1C interface. You can print from the printer memory card or via a USB stick.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386728091912,"sku":"DAR01614","price":86.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01614_01.jpg?v=1786079246"},{"product_id":"bigtreetech-panda-revo-p1-hotend","title":"BigTreeTech Panda Revo P1 Hotend","description":"This Panda Revo P1 hotend can be replaced in just 30 seconds without tools, so you can quickly continue making your next 3D print. The 0.4 mm Revo High Flow nozzle and the 60 W HeaterCore ensure a flow rate of up to 40 mm³\/s. Easily print at high temperatures of up to 300 °C. This allows you to print with many different types of filament, including PLA, PETG, ABS, TPU, HIPS and Nylon. The Panda Revo is suitable for the Bambu Lab P1P and P1S. In addition, it is compatible with the RapidChange Revo Standard, ObXidian and High Flow nozzles.\u003cbr\u003e\u003cbr\u003e \u003cem\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this hotend is \u003cstrong\u003eNOT\u003c\/strong\u003e compatible with the Revo belt nozzle.\u003c\/em\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386728288520,"sku":"DAR01615","price":138.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01615_01.jpg?v=1786079250"},{"product_id":"bigtreetech-eddy-coil","title":"Bigtreetech Eddy Coil","description":"The Eddy Coil from Bigtreetech is a non-contact, high-speed leveling tool designed for Klipper. With its lightweight 6g design, the Eddy Coil can level within 20 seconds with 0.5µm precision. It uses millisecond-level eddy current to detect minute irregularities on the print bed, adjust the height accordingly, and level the bed. The advanced temperature compensation ensures consistent and precise leveling regardless of temperature differences. The Eddy Coil can be easily installed on the TL-Q5MC\/PL-08N location within minutes. It works with EBB36\/42 CAN and is ideal for DIY users. This leveling tool is suitable for H2 series extruders and Ender-3.\u003cbr\u003e\u003cbr\u003e The box contains:\u003cul\u003e\n\u003cli\u003e Eddy Coil\u003c\/li\u003e\n\u003cli\u003e 150mm 4pin Dupont female connection cable\u003c\/li\u003e\n\u003cli\u003e M3x18 mounting screws 2x\u003c\/li\u003e\n\u003cli\u003e M3x25 mounting screws 2x\u003c\/li\u003e\n\u003cli\u003e Tie wraps 5x - Stickers 3x\u003c\/li\u003e\n\u003cli\u003e BTT duck\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386737168648,"sku":"DAR01709","price":16.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01709_01.jpg?v=1786079381"},{"product_id":"bigtreetech-panda-lux-led-upgrade-kit-for-bambu-lab-x1-p1-series","title":"BigTreeTech Panda Lux LED Upgrade Kit for Bambu Lab X1\/P1 Series","description":"Light up your print surface with this Panda Lux LED Upgrade from Bigtreetech. The 31 high-quality LED lights illuminate the print surface so you have a better view during 3D printing. The lights have a color temperature of 6000 K (cool white) and a lifespan of up to 36,000 hours. Thanks to the magnetic mounting system, you can easily attach this LED bar to the printer. The bar is powered via the connector of the original light bar and can be controlled via the original screen. A high-quality aluminum alloy housing ensures that this LED bar has a long life. This LED upgrade has a size of 273 x 23 x 10.8 mm and is suitable for the P1 and X1 series 3D printers from Bambu Lab.\u003cbr\u003e \u003cbr\u003e The box contains: \u003cul\u003e \t\u003cli\u003ePanda Lux\u003c\/li\u003e \t\u003cli\u003e100mm connection cable\u003c\/li\u003e \t\u003cli\u003eAdapter board\u003c\/li\u003e \t\u003cli\u003eElectrical tape\u003c\/li\u003e \t\u003cli\u003eDouble sided tape 4x\u003c\/li\u003e \u003c\/ul\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386737201416,"sku":"DAR01710","price":7.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01710_01.jpg?v=1786079382"},{"product_id":"bigtreetech-panda-pwr","title":"BigTreeTech Panda PWR","description":"Make it easy on yourself with the Panda PWR from Bigtreetech. This smart power management module can be controlled remotely via wifi, allowing you to monitor and switch off the power at any time. The ability to monitor your power consumption and costs in real time also makes the Panda PWR ideal for print farms. This module is suitable for Creality Ender\/K1, Anycubic Kobra and Bambu Lab 3D printers.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eUser friendly\u003c\/strong\u003e\u003cbr\u003e You can easily control the Panda PWR via your mobile or the Panda Touch. Connect the Panda PWR to your 3D printer and the power outlet. When the blue indicator light starts to shine, you can connect to the 'PandaPWR' network and the default password 987654321. It is recommended to change this password after the first time logging in. After the setup page is opened, you can select your own network. The Panda PWR has 3 USB ports for enhanced support. USB1 is controllable, which makes it most suitable for devices that do not need constant power, such as USB light strips and USB fans. USB2 is always on and is therefore ideal for devices that need constant power.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eCombine with the Panda Touch\u003c\/strong\u003e\u003cbr\u003e The Panda PWR can also be used in combination with the Panda Touch, allowing you to work even more efficiently. By connecting 3D printers individually to a Panda PWR, you can control the flow of up to 10 3D printers with the Panda Touch, allowing you to streamline your process. To connect your Panda PWR to your Panda Touch, click the '+' on your Panda Touch and hold the Panda PWR close to it. Press the 'bind' button until the light turns blue. You will get a confirmation pop-up on the Panda Touch and the indicator light will turn green.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eOther functionalities\u003c\/strong\u003e\u003cbr\u003e The Panda PWR is made of high-quality materials. The full copper heat sink and the robust protection against overvoltage, overcurrent and short circuits. This makes this product very safe and delivers exceptional performance. This module is approved and contains CE and FCC certifications.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386743099656,"sku":"DAR01858","price":37.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01858_01.jpg?v=1786079618"},{"product_id":"bigtreetech-panda-branch","title":"BigTreeTech Panda Branch","description":"\u003cp\u003eExpand your possibilities with the BIQU Bigtreetech Panda Branch. You can easily connect it to the AMS of your Bambu Lab X1\/P1\/A1 3D printer. This way you are protected against reverse connection and overcurrent. The red indicator light turns on immediately when detecting overcurrent, so you can quickly solve this. The handy design is easy to install. You can also 3D print a protective cover. You can use the DIP switch to switch between 1 A, 2 A and 2.7 A for 5 V outputs, so you can protect your devices well against too high current. The Panda Branch has 4 type A USB ports with a 5 V output that you can use for fans, for example. The MX3.0 2x2 pin interface can be used to connect the AMS. Connect the AMS to 1 of these ports, the other ports are redundant and only designed for AMS connection. You cannot use these ports to supply power to other devices.\u003c\/p\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386743132424,"sku":"DAR01859","price":15.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01859_01.jpg?v=1786079619"},{"product_id":"bigtreetech-eddy-duo-usb-or-can","title":"Bigtreetech Eddy Duo (USB or CAN)","description":"\u003cp data-end=\"389\" data-start=\"0\"\u003eThe \u003cstrong data-end=\"27\" data-start=\"3\"\u003eBIGTREETECH Eddy Duo\u003c\/strong\u003e is an advanced, non-contact auto-bed leveling sensor designed to improve the precision and efficiency of your 3D printer. Thanks to advanced eddy current technology, the Eddy Duo detects microscopic irregularities on the print bed, allowing for fast and accurate height adjustments and optimal first layer adhesion.\u003c\/p\u003e\u003cp data-end=\"421\" data-start=\"391\"\u003e \u003cstrong data-end=\"419\" data-start=\"391\"\u003eKey Features:\u003c\/strong\u003e \u003c\/p\u003e\u003cul data-end=\"1269\" data-start=\"422\"\u003e\n\u003cli data-end=\"614\" data-start=\"422\"\u003e\u003cp data-end=\"614\" data-start=\"424\"\u003e \u003cstrong data-end=\"462\" data-start=\"424\"\u003eFast and accurate leveling:\u003c\/strong\u003e Levels the print bed in just 20 seconds with 0.5 µm precision, resulting in a uniform first layer and improved print results.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"783\" data-start=\"615\"\u003e\u003cp data-end=\"783\" data-start=\"617\"\u003e \u003cstrong data-end=\"648\" data-start=\"617\"\u003eVersatile connectivity:\u003c\/strong\u003e Supports both USB and CAN bus communications, allowing it to be flexibly integrated into various printer configurations.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"964\" data-start=\"784\"\u003e\u003cp data-end=\"964\" data-start=\"786\"\u003e \u003cstrong data-end=\"811\" data-start=\"786\"\u003eLightweight Design:\u003c\/strong\u003e Weighing only 6 grams, it minimizes the load on the extruder and maintains the printer's movement speed and accuracy.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1124\" data-start=\"965\"\u003e\u003cp data-end=\"1124\" data-start=\"967\"\u003e \u003cstrong data-end=\"994\" data-start=\"967\"\u003eTemperature Compensation:\u003c\/strong\u003e Integrates with Klipper's temperature compensation function to keep leveling accurate and prevent temperature drift.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1269\" data-start=\"1125\"\u003e\u003cp data-end=\"1269\" data-start=\"1127\"\u003e \u003cstrong data-end=\"1154\" data-start=\"1127\"\u003eEasy Installation:\u003c\/strong\u003e Designed for easy mounting on standard Voron X carriages and compatible with various 3D printer models.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp data-end=\"1450\" data-start=\"1271\"\u003e The Eddy Duo is specifically designed for Klipper-based 3D printers, offering seamless integration for users seeking superior print quality and ease of use.\u003c\/p\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386751062280,"sku":"DAR01929","price":29.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01929_01.jpg?v=1786079836"},{"product_id":"cnc-voron-tap-v2-0-black","title":"CNC Voron Tap V2.0 Black","description":"\u003cul\u003e \t\u003cli\u003eMulti Axis CNC machined. Lighter (59.8g) and smaller (45mm*13mm*68mm).\u003c\/li\u003e \t\u003cli\u003eFull Al6061 T6 aluminium construction. Enhanced wear \u0026amp; high-temperature resistance.\u003c\/li\u003e \t\u003cli\u003eUnmatched stability and reliability.\u003c\/li\u003e \t\u003cli\u003eDesigned for VORON V2.4 R1\u0026amp;R2 and VORON Trident\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eThe CNC Tap is shipped with a special oil that prevents corrosion. We recommend cleaning this oil and applying your choice of lubricant after you receive it. No disassembly is required to do this. Follow the instructions in the build guide.\u003c\/p\u003e  \u003ch4\u003e\u003cstrong\u003eCNC Voron Tap:\u003c\/strong\u003e\u003c\/h4\u003e  \u003cul\u003e \t\u003cli\u003eUltra-high precision: 0.4μm (0.0004mm)\u003c\/li\u003e \t\u003cli\u003eMaterial: All Al6061 T6 aluminium structure. Enhance wear resistance and high-temperature resistance\u003c\/li\u003e \t\u003cli\u003eSize: 45mm*13mm*68mm\u003c\/li\u003e \t\u003cli\u003eUltra Light body: 59.8g\u003c\/li\u003e \t\u003cli\u003e5-24V supported\u003c\/li\u003e \t\u003cli\u003e\u003cstrong\u003eDesigned for VORON V2.4 R1\u0026amp;R2 and VORON Trident\u003c\/strong\u003e\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eThe effective travel of the printer will not be affected \u003cem\u003e\u003cstrong\u003e (the printed version will reduce the Y travel by 3mm or the nozzle will hit the door)\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e \t\u003cli\u003eOmron D2FP-FN new optical microswitch. Lower noise, faster trigger, higher sensitivity and accuracy, and long service life.\u003c\/li\u003e \t\u003cli\u003eLife span: 70,000,000+ probing\u003c\/li\u003e \t\u003cli\u003eEasy installation: No need to assemble and disassemble TAP itself! (Do not disassemble by yourself, otherwise, the product may be damaged!)\u003c\/li\u003e \t\u003cli\u003eSuitable for: VORON V2.4 R1\u0026amp;R2 and VORON Trident printers\u003c\/li\u003e \t\u003cli\u003eNot suitable for: Switchwire, V1.8, Legacy, VORON V0.x\u003c\/li\u003e \u003c\/ul\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386757648648,"sku":"DAR02088","price":40.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR02088_01.jpg?v=1786080062"},{"product_id":"cnc-tap-sensor-v2-0","title":"CNC TAP Sensor V2.0","description":"This is a \u003cstrong\u003ereplacement sensor module for the CHAOTICLAB CNC Voron Tap V2\u003c\/strong\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386757681416,"sku":"DAR02089","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR02089_01.jpg?v=1786080066"},{"product_id":"bigtreetech-knomi-v2-0-for-voron","title":"BigTreeTech KNOMI V2.0 for Voron","description":"\u003cp\u003eKNOMI is a mini round screen designed specifically for Klipper running 3D printers, offering users a unique and personalized way to monitor their printer’s operation. The screen displays important information through KNOMI UI, such as heated bed temperature, nozzle temperature, leveling status, printing progress, etc. KNOMI is an open-source product, allows users to customize the user interface and design mounting brackets to fit their specific 3D printer.\u003c\/p\u003e  \u003ch4\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/h4\u003e  \u003cul\u003e \t\u003cli\u003eKNOMI UI-based display for quick and easy monitoring of printer status.\u003c\/li\u003e \t\u003cli\u003eUser-friendly, wireless communication through WiFi.\u003c\/li\u003e \t\u003cli\u003eOpen-source enables effortless customization and adaptation of KNOMI to various 3D printers with provided 3D model files, while also allowing personalized user interfaces to suit preferences.\u003c\/li\u003e \t\u003cli\u003eCompatibility with Voron StealthBurner using our custom printed part files.\u003c\/li\u003e \t\u003cli\u003eInput voltage DC 5V\u003c\/li\u003e \t\u003cli\u003eReserved Type-C port for DIY burning, increasing versatility.\u003c\/li\u003e \t\u003cli\u003eFull-view screen for accurate colour representation from any angle.\u003c\/li\u003e \u003c\/ul\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386757714184,"sku":"DAR02090","price":22.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR02090_01.jpg?v=1786080067"},{"product_id":"bigtreetech-manta-m8p-control-board-v2-0","title":"BigTreeTech Manta M8P Control Board V2.0","description":"\u003cp\u003eThe Manta M8P V2.0 is a powerful and future-proof 32-bit control board for 3D printers, specifically designed for use with Klipper firmware. Thanks to its integrated architecture, this board combines microcontroller and host computing (via a core board such as BIGTREETECH CB1 or Raspberry Pi CM4) on a single PCB, which saves space, reduces cable clutter, and ensures a neat, reliable build.\u003c\/p\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386784125192,"sku":"DAR02753","price":78.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR02753_01.jpg?v=1786080946"},{"product_id":"bigtreetech-tft43-v3-0-touch-screen-controller-panel","title":"BigTreeTech TFT43 v3.0 touch screen controller panel","description":"Give your 3D printer an upgrade with this TFT43 touchscreen Two Working Modes from Bigtreetech.\u003cbr\u003e \u003cbr\u003e This 4.8-inch touchscreen has a size of 143.65mm x 67.25mm with a resolution of 480 x 272 RGB. The display is made of wear-resistant glass and equipped with a high-quality backlight for a clear and bright screen display. Thanks to the high sensitivity of the screen, the screen responds quickly and efficiently to your prompts for added ease of use.\u003cbr\u003e \u003cbr\u003e You simply connect the display via the TFT connector and the supplied mounting cable.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e\u003cspan style=\"font-size:11pt\"\u003e\u003cspan style=\"line-height:107%\"\u003e\u003cspan style=\"font-family:Calibri,sans-serif\"\u003e\u003cem\u003e\u003cspan style=\"font-size:9.0pt\"\u003e\u003cspan style=\"background-color:white\"\u003e\u003cspan style=\"line-height:107%\"\u003e\u003cspan style=\"font-family:\" arial\u003e\u003cspan style=\"color:black\"\u003ePlease note we do not offer support on the installation of this product.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e  ","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386897404168,"sku":"DAR00234","price":54.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00234_01.jpg?v=1786083703"},{"product_id":"bigtreetech-tft70-v3-0-touch-screen-controller-panel","title":"BigTreeTech TFT70 v3.0 touch screen controller panel","description":"Give your 3D printer an upgrade with this TFT70 touchscreen Two Working Modes from Bigtreetech.\u003cbr\u003e \u003cbr\u003e This 7 inch touchscreen has a size of 196mm x 100mm with a resolution of 800 x 480 RGB. The display is made of wear-resistant glass and equipped with a high-quality backlight for a clear and bright screen display. Thanks to the high sensitivity of the screen, the screen responds quickly and efficiently to your prompts for added ease of use.\u003cbr\u003e \u003cbr\u003e You simply connect the display via the TFT connector and the supplied mounting cable.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e\u003cspan style=\"font-size:11pt\"\u003e\u003cspan style=\"line-height:107%\"\u003e\u003cspan style=\"font-family:Calibri,sans-serif\"\u003e\u003cem\u003e\u003cspan style=\"font-size:9.0pt\"\u003e\u003cspan style=\"background-color:white\"\u003e\u003cspan style=\"line-height:107%\"\u003e\u003cspan style=\"font-family:\" arial\u003e\u003cspan style=\"color:black\"\u003ePlease note we do not offer support on the installation of this product.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386897469704,"sku":"DAR00236","price":64.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00236_01.jpg?v=1786083704"},{"product_id":"bigtreetech-ups-24v-v1-0","title":"BigTreeTech UPS 24V v1.0","description":"With this UPS module from BigTreeTech, your printer will automatically resume printing after a power failure.\u003cbr\u003e \u003cbr\u003e This UPS V1.0 has a size of 52.53mm x 50mm and is easy to connect with the supplied cables.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eNB: \u003c\/strong\u003eThis product works with 24 volts. Before connecting this product, please check whether the power source is the same.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e\u003cem\u003ePlease note we do not offer support on the installation of this product.\u003c\/em\u003e\u003c\/strong\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386897568008,"sku":"DAR00239","price":11.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00239_01.jpg?v=1786083709"},{"product_id":"bigtreetech-sfs-v1-0-smart-filament-detection-sensor","title":"BigTreeTech SFS v1.0 smart filament detection sensor","description":"Never let a 3D project fail due to filament problems with this SFS V1.0 filament detection sensor from BigTreeTech.\u003cbr\u003e \u003cbr\u003e This high-quality sensor is suitable for almost any filament type with a size of 1.75mm and detects in time whether there is something wrong with your filament. Has the filament run out halfway through the print or does the filament appear to be broken for unforeseen reasons during printing? Then this smart filament sensor ensures that your 3D print is automatically paused so that you can solve the problem and your print can be successfully resumed.\u003cbr\u003e \u003cbr\u003e The sensor has a response time of only 7mm, can be easily connected to different displays and is compatible with almost any motherboard with a break detection interface such as the SKR mini E3, SKR E3 DIP, SKR V1.3, MKS GEN L, MKS GEN V1.4 and more.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386898092296,"sku":"DAR00248","price":14.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00248_01.jpg?v=1786083719"},{"product_id":"bigtreetech-rrf-e3-v1-1-32-bit-mainboard","title":"BigTreeTech RRF E3 v1.1 32-bit mainboard","description":"\u003cp\u003eWith this motherboard from Bigtreetech you can easily upgrade your 3D printer.\u003cbr\u003e \u003cbr\u003e The RRF E3 v1.1 is equipped with a USB connection and four motor driver interfaces: XM, YM, ZAM, ZBM, EM. You can easily expand the interface to include a filament detection function, a resume printing function, BLTouch for automatic bed leveling and RGB light. In addition, you can connect the automatic shutdown module so that your 3D printer turns off automatically after the print is completed.\u003cbr\u003e \u003cbr\u003e The mainboard has a size of 103.75mm x 75.25mm and is compatible with the Ender 3, Ender 3 Pro, Ender 5 and CR10.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e\u003cem\u003ePlease note we do not offer support on the installation of this product.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386931187976,"sku":"DAR00450","price":56.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00450_01.jpg?v=1786084526"},{"product_id":"bigtreetech-skr-2-mainboard-arm","title":"BigTreeTech SKR 2 mainboard ARM","description":"With this motherboard from Bigtreetech you can easily upgrade your 3D printer.\u003cbr\u003e \u003cbr\u003e The SKR 2 is equipped with a USB connection and five motor driver interfaces: X, Y, Z, E0 and E1. The board has a size of 90mm x 70mm and is equipped with a powerful 32-bit processor that supports various drivers such as the TMC2208, TMC2130, TMC5160, TMC2209, TMC2225, LV8729, DRV8825, A4988, ST820 and more.\u003cbr\u003e \u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/SKR_2.pdf?v=1790146011\"\u003eTechnical information\u003c\/a\u003e (PDF)\u003cbr\u003e \u003cbr\u003e Note: This product is Rev B.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e\u003cem\u003ePlease note we do not offer support on the installation of this product.\u003c\/em\u003e\u003c\/strong\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386932662536,"sku":"DAR00479","price":55.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00479_01.jpg?v=1786084566"},{"product_id":"bigtreetech-skr-mini-e3-v3-0-32-bit-mainboard","title":"BigTreeTech SKR mini E3 v3.0 32-bit mainboard","description":"With this motherboard from Bigtreetech you can easily upgrade your 3D printer.\u003cbr\u003e \u003cbr\u003e The SKR Mini E3 v3.0 is equipped with a micro USB connection and five motor driver interfaces: XM, YM, ZAM, ZBM and EM. You can easily expand the interface with a heated bed module, a filament detection function, a resume printing function, a touchscreen or the BLTouch for automatic bed leveling. In addition, you can also connect the automatic shutdown module so that your printer switches off automatically after your print is completed.\u003cbr\u003e \u003cbr\u003e The board has a size of 103.75mm x 70.25mm and is equipped with a powerful 32-bit processor with a TMC2209 driver, the drivers have a RET6 chip.\u003cbr\u003e \u003cbr\u003e Ideal to replace the Ender-3 V2 motherboard.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e\u003cem\u003ePlease note we do not offer support on the installation of this product.\u003c\/em\u003e\u003c\/strong\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386974605576,"sku":"DAR00690","price":39.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00690_01.jpg?v=1786085417"},{"product_id":"bigtreetech-skr-pico-v1-0","title":"BigTreeTech SKR PICO V1.0","description":"BTT SKR Pico V1.0 is a custom motherboard designed for VORON V0 printer.\u003cbr\u003e \u003cbr\u003e Brand new version for Voron V0 \u0026amp; V0.1.\u003cbr\u003e Upgraded design and excellent performance, ideal choice for Voron users. The fuse kit consists of a fuse and holder, which allows for easy disassembly and installation. Type-C interface enables main control communication.\u003cbr\u003e \u003cbr\u003e Perfect match with Raspberry Pi.\u003cbr\u003e With the Raspberry Pi board frame, Raspberry Pi can be perfectly installed on BTT SKR Pico V1.0, saving internal space. SKR Pico's unique lateral seat design perfectly matches the space characteristics of the Voron V0 and V0.1 machine to be mounted longitudinally on the motherboard.\u003cbr\u003e \u003cbr\u003e Silent printing \u0026amp; premium capacitors.\u003cbr\u003e Equipped with TMC2209 mute driver UART mode, SKR PICO V1.0 supports mute 3D printing. The main version of the chip capacitor (MLCC) adopts high quality Murata capacitors to improve product quality.\u003cbr\u003e \u003cbr\u003e Upgraded heat dissipation.\u003cbr\u003e Improved heat sink design and enlarged heat dissipation area. The improved controllable fan is able to reduce the temperature of the entire machine when it is in operation.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386975719688,"sku":"DAR00704","price":24.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00704_01.jpg?v=1786085438"},{"product_id":"bigtreetech-tft35-e3-v3-0-1-touch-screen-controller-panel","title":"BigTreeTech TFT35-E3 v3.0.1 touch screen controller panel","description":"Upgrade your 3D printer with this TFT35-E3 v3.0.1 Touch Screen Two Working Modes from Bigtreetech.\u003cbr\u003e \u003cbr\u003e This 3.5inch touchscreen has a size of 93.35mm x 87mm. The display is made of wear-resistant glass and equipped with a high-quality backlight for a clear and bright screen display. Thanks to the high sensitivity of the screen, the screen responds quickly and efficiently to your prompts for added ease of use.\u003cbr\u003e \u003cbr\u003e You simply connect the display via the TFT connector and the supplied mounting cable.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386976112904,"sku":"DAR00713","price":38.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00713_01.jpg?v=1786085452"},{"product_id":"tmc2208-stepper-driver-1-256-step-interpolation-v-3-0","title":"TMC2208 Stepper Driver | 1\/256 step interpolation v 3.0","description":"\u003cp\u003eThe TMC2208 v3.0 is a single-axis stepper motor drive chip, equipped with interpolation functionality. This makes it possible to have 1\/256 microsteps on the output with a 1\/16 microstep driver. This makes the TMC2130 v3.0 an incredibly quiet driver, so that no heavy CPU is required. The stepper driver also offers power control, for energy savings of up to 70%.\u003c\/p\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386980438280,"sku":"DAR00794","price":4.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00794_01.jpg?v=1786085576"},{"product_id":"tmc2225-stepper-driver-1-256-step-interpolation-v-1-0","title":"TMC2225 Stepper Driver | 1\/256 step interpolation v 1.0","description":"\u003cp\u003eThe TMC2225 stepper driver is a powerful stepper motor driver, equipped with interpolation functionality. This makes it possible to have 1\/256 microsteps on the output with a 1\/16 microstep driver. This makes the TMC2225 v1.0 an incredibly quiet driver, so that no heavy CPU is required.\u003c\/p\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386980503816,"sku":"DAR00796","price":5.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00796_01.jpg?v=1786085578"},{"product_id":"tmc2130-stepper-driver-1-256-step-interpolation-v-3-0","title":"TMC2130 Stepper Driver | 1\/256 step interpolation v 3.0","description":"\u003cp\u003eThe TMC2130 v3.0 is a two-phase stepper driver with a standard SPI interface and a step\/dir interface. Because the driver is equipped with interpolation functionality, it is possible to have 1\/256 microsteps on the output with a 1\/16 microstep driver. This makes the TMC2130 v3.0 an incredibly quiet driver, so that no heavy CPU is required. The stepper driver also offers power control, for energy savings of up to 75%.\u003c\/p\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386980536584,"sku":"DAR00797","price":15.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00797_01.jpg?v=1786085580"},{"product_id":"bigtreetech-octopus-v1-1-control-board","title":"BigTreeTech Octopus v1.1 control board","description":"The board for building your Voron V2.4, but the BigTreeTech Octopus V1.1 is of course also a good choice for other 3D printer models! This electronics board is equipped with a powerful 32-bit ARM microprocessor that is supported by both Klipper and Marlin software. With 8 slots for control modules of stepper motors, not only multiple extruders, but also a bed plate, for example, can be leveled at three points.\u003cbr\u003e\u003cbr\u003e The Octopus V1.1 also offers a lot of space in terms of expansion options. You can install an automatic bed height sensor, LCD screens and WIFI. There are connections for 5 thermistors, 4 heating elements, a heated bed and 6 PWM fans. The eight slots for stepper motor control are Pololu-compatible and can be set up for SPI and UART communication.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e It is recommended to connect the board to 24V","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386999738632,"sku":"DAR00922","price":58.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00922_01.jpg?v=1786085860"},{"product_id":"bigtreetech-octopus-pro-f446","title":"BigTreeTech Octopus Pro (F446)","description":"A beast of a plate! The BigTreeTech Octopus V1.0 Pro is equipped with a powerful 32-bit ARM microprocessor that is supported by Klipper, ReprapFirmware and Marlin software. With 8 slots for control modules of stepper motors, not only multiple extruders, but also a bed plate, for example, can be leveled at three points.\u003cbr\u003e\u003cbr\u003e In terms of expansion options, the Octopus V1.0 Pro offers a lot of space. You can install an automatic bed height sensor, LCD screens and WIFI. There are connections for 5 thermistors, 4 heating elements, a heated bed and 6 PWM fans.\u003cbr\u003e\u003cbr\u003e The eight slots for stepper motor control are Pololu-compatible and can be set up for SPI and UART communication. You can choose per slot with a jumper whether you want to use the separate power supply for stepper drivers. This allows you to supply up to 60 Volts to the stepper motor control, although the module must of course be able to handle this. The TMC5160, for example, is a good option for this, as you can safely operate it on 48V for extra fast movements.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58386999804168,"sku":"DAR00923","price":71.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR00923_01.jpg?v=1786085862"},{"product_id":"bigtreetech-manta-m5p-control-board","title":"BigTreeTech Manta M5P Control Board","description":"The Manta M5P from BigTreeTech offers ultimate 3D printing experiences and is optimized for use in combination with the popular Klipper software for effortless control of up to five stepper motors.\u003cbr\u003e\u003cbr\u003e Thanks to the many expansion options of the Manta M5P, you can fully customize your 3D printer to your wishes. In addition to the LAN port, two HDMI ports, 3x USB 2.0 and USB type-C port, there are headers for connecting LCD screens, an automatic bed leveling sensor, 3 thermistors and two heating elements next to the heated bed. The 40-pin GPIO header, CAN and SPI headers enable further expansion. If you use stepper motor control that supports higher voltages, you can set the M5P per driver to use 24-56V from the HV-IN port.\u003cbr\u003e\u003cbr\u003e This control board is a good choice to replace the current electronics in your Ender-3, Voron V0 etc.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e You need the Raspberry CM4 or CB1 module from BigTreeTech, which is sold separately. The HDMI output only works with the CM4 module.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008258312,"sku":"DAR01023","price":61.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01023_01.jpg?v=1786085998"},{"product_id":"bigtreetech-cb1-module","title":"BigTreeTech CB1 module","description":"The CB1 from BigTreeTech is a powerful module that can be used in combination with the PI4B module from BigTreeTech to get a Raspberry PI4 compatible alternative. You can also mount the CB1 module on BigTreeTech's Manta boards to control a 3D printer. This solution is also compatible with the popular Klipper software.\u003cbr\u003e\u003cbr\u003e The CB1 is equipped with a very fast Quad-core 64-bit ARM Cortex-A53 processor and has 1 GB of RAM. The board also has a graphics chip that supports 4K HDMI video and WiFi on board. For the most optimal performance, we recommend installing a heatsink so that heat can be dissipated efficiently.\u003cbr\u003e\u003cbr\u003e Extra information:\u003cbr\u003e \u003ca href=\"https:\/\/github.com\/bigtreetech\/CB1\/releases\" target=\"_blank\"\u003eSoftware\u003c\/a\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008323848,"sku":"DAR01025","price":34.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01025_01.jpg?v=1786086005"},{"product_id":"bigtreetech-cb1-heatsink","title":"BigTreeTech CB1 Heatsink","description":"\u003cp\u003eGet the best performance from your CB1 plug-in module with the BigTreeTech CB1 Heatsink. This specially developed heatsink with a sleek design effortlessly dissipates all heat, so that the processor can perform its tasks optimally. You can use a fan to dissipate the heat from the heatsink even faster.\u003c\/p\u003e","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008454920,"sku":"DAR01026","price":6.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01026_01.jpg?v=1786086005"},{"product_id":"bigtreetech-pi4b-adapter-v1-0-for-cb1-and-cm4","title":"BigTreeTech PI4B Adapter V1.0 for CB1 and CM4","description":"With the BigTreeTech PI4B Adapter v1.0 you can easily use the CB1 or CM4 plug-in modules to get a powerful alternative to the Raspberry PI4B. The form factor of the PI4B Adapter is identical to the Raspberry PI4B, so you can easily use this board as a replacement.\u003cbr\u003e \u003cbr\u003e The PI4B module offers extensive connectivity thanks to the 1000Mbit Ethernet port, CSI camera port and dual micro HDMI outputs. In addition, 4 USB 2.0 outputs and the standard Raspberry PI 30-pin header are available. The PI4B can be powered via a USB type-C input and has a MicroSD slot for inserting the memory card.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003ePlease note:\u003c\/strong\u003e the PI TFT screen is only compatible with this board in combination with the CM4 plug-in module","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008487688,"sku":"DAR01027","price":19.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01027_01.jpg?v=1786086006"},{"product_id":"bigtreetech-octopus-max-ez","title":"BigTreeTech Octopus Max EZ","description":"If you can't get enough of stepper motors, the BigTreeTech Octopus Max EZ offers a phenomenal TEN slots for EZ series stepper motor drive modules. Useful if, for example, you want to build a multi-material station and control it directly from your 3D printer.\u003cbr\u003e\u003cbr\u003e The Octopus Max EZ has a powerful 32-bit microprocessor that runs at 550Mhz. In addition, numerous expansions are possible thanks to the CAN, automatic bed leveling sensor, LCD, RGB and FWS ports. The Octopus Max supports 7 fans, 4 heating elements, 5 thermistors and 6 end stops. Optionally you can install a WIFI module for network communication. For extra performance, if your stepper motor driver supports it, up to 56V can be supplied via a jumper setting that can be set per driver.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008520456,"sku":"DAR01028","price":87.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01028_01.jpg?v=1786086007"},{"product_id":"bigtreetech-ez2209-step-driver","title":"BigTreeTech EZ2209 Step Driver","description":"The EZ2209 from BigTreeTech's EZ series has the more modern TMC2209 on board, which does support StallGuard compared to the TMC2208. Thanks to the 1\/256 step interpolation, a good 3D printing experience can also be achieved on less powerful electronics boards. The parameters of the TMC2208 chip can be further optimized via a UART connection to your microprocessor. With this module you can supply up to 2A current and works on 12 to 24 Volts.\u003cbr\u003e \u003cbr\u003e BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008585992,"sku":"DAR01029","price":5.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01029_01.jpg?v=1786086013"},{"product_id":"bigtreetech-ez5160-pro-v1-0-step-driver","title":"BigTreeTech EZ5160 Pro V1.0 Step Driver","description":"With the BigTreeTech EZ5160 you get the most powerful module in the series for optimal 3D printing performance. The TMC5160 is powerful, quiet and accepts up to 48V for fast print movements. With 2.5A maximum current and StallGuard you are assured of the highest reliability and precision. To achieve ultimate performance, you can adjust many settings via the SPI connection.\u003cbr\u003e \u003cbr\u003e BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008618760,"sku":"DAR01030","price":21.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01030_01.jpg?v=1786086012"},{"product_id":"bigtreetech-ez2208-v1-0-step-driver","title":"BigTreeTech EZ2208 V1.0 Step Driver","description":"The EZ2208 from BigTreeTech's EZ series offers powerful, quiet stepper motor control. Thanks to the 1\/256 step interpolation, a good 3D printing experience can also be achieved on less powerful electronics boards. The parameters of the TMC2208 chip can be further optimized via a UART connection to your microprocessor. With this module you can supply up to 2A current and it works on 12 to 24 Volts.\u003cbr\u003e\u003cbr\u003e BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008651528,"sku":"DAR01031","price":6.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01031_01.jpg?v=1786086015"},{"product_id":"bigtreetech-ez2130-v1-0-step-driver","title":"BigTreeTech EZ2130 V1.0 Step Driver","description":"The BigTreeTech EZ2130 from the EZ series contains the silent TMC2130 stepper motor driver. This powerful chip can supply up to 2A current and works between 12 and 24 Volts. To achieve optimal performance, the control parameters can be adjusted through communication via SPI. The maximum supported microstepping mode is 1\/256 for this driver.\u003cbr\u003e\u003cbr\u003e BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008684296,"sku":"DAR01032","price":11.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01032_01.jpg?v=1786086016"},{"product_id":"bigtreetech-ez6609-v1-0-step-driver","title":"BigTreeTech EZ6609 V1.0 Step Driver","description":"The BigTreeTech EZ6609 has the powerful GC6609 chip on board for optimal performance. Various parameters can be adjusted with the UART connection and the driver delivers up to 2A.\u003cbr\u003e\u003cbr\u003e BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008749832,"sku":"DAR01033","price":7.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01033_01.jpg?v=1786086020"},{"product_id":"bigtreetech-ez2225-v1-0-step-driver","title":"BigTreeTech EZ2225 V1.0 Step Driver","description":"The BigTreeTech EZ2225 has the TMC2225 chip on board for good 3D printing results at a competitive price. The 1\/256 step interpolation offers a quiet 3D printing experience and the control can be further optimized via a UART connection. We recommend using active cooling to get the most out of this chip.\u003cbr\u003e\u003cbr\u003e BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008782600,"sku":"DAR01034","price":5.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01034_01.jpg?v=1786086021"},{"product_id":"bigtreetech-ez-driver-connector-v1-0","title":"BigTreeTech EZ-Driver Connector V1.0","description":"Convert any BigTreeTech EZ stepper motor driver board to fit into a Pololu-compatible slot. Very useful if you have a board with Pololu-compatible slots, but want to use the compact EZ drivers. BigTreeTech's EZ series offers a variety of powerful stepper motor drivers, but these are not suitable for the 2x8 pin headers found on many 3D printer electronics boards. This module makes it possible to use the EZ drivers! You just need to take into account the extra height of the module compared to the standard stepper motor control boards.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003ePlease note:\u003c\/strong\u003e This module comes without a driver, these are sold separately","brand":"BigTreeTech","offers":[{"title":"Default Title","offer_id":58387008815368,"sku":"DAR01036","price":2.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1031\/6939\/2904\/files\/DAR01036_01.jpg?v=1786086022"}],"url":"https:\/\/www.123-3d.co.uk\/collections\/parts-brand-bigtreetech.oembed","provider":"123-3D","version":"1.0","type":"link"}